openstack/openstack-manuals
Code Issues Proposed changes
Files
6e3f0c8edba4a7d3e296d7e73a7b0e055ea3d6da
openstack-manuals/doc/install-guide/section_glance-install.xml
Matthew Kassawara 6e3f0c8edb Modify glance content for Kilo 
Modify glance content for Kilo as follows:

1) Change python-keystoneclient with python-openstackclient.

2) Adjust CLI input and output for API version 2.

3) Add value to log_file option.

4) Remove version from value of auth_uri option.

Change-Id: Ia0f88473b4600580c34c8a4b1664b86435c7bf06
Implements: blueprint installguide-kilo
2015-03-26 14:11:43 -05:00

336 lines
15 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="UTF-8"?>
<section xmlns="http://docbook.org/ns/docbook"
xmlns:xi="http://www.w3.org/2001/XInclude"
xmlns:xlink="http://www.w3.org/1999/xlink"
version="5.0"
xml:id="glance-install">
<title>Install and configure</title>
<para>This section describes how to install and configure the Image Service,
code-named glance, on the controller node. For simplicity, this
configuration stores images on the local file system.</para>
<note>
<para>This section assumes proper installation, configuration, and
operation of the Identity service as described in
<xref linkend="keystone-install"/> and
<xref linkend="keystone-verify"/>.</para>
</note>
<procedure os="ubuntu;rhel;centos;fedora;sles;opensuse">
<title>To configure prerequisites</title>
<para>Before you install and configure the Image Service, you must
create a database, service credentials, and API endpoints.</para>
<step>
<para>To create the database, complete these steps:</para>
<substeps>
<step>
<para>Use the database access client to connect to the database
server as the <literal>root</literal> user:</para>
<screen><prompt>$</prompt> <userinput>mysql -u root -p</userinput></screen>
</step>
<step>
<para>Create the <literal>glance</literal> database:</para>
<screen><userinput>CREATE DATABASE glance;</userinput></screen>
</step>
<step>
<para>Grant proper access to the <literal>glance</literal>
database:</para>
<screen><userinput>GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'localhost' \
IDENTIFIED BY '<replaceable>GLANCE_DBPASS</replaceable>';</userinput>
<userinput>GRANT ALL PRIVILEGES ON glance.* TO 'glance'@'%' \
IDENTIFIED BY '<replaceable>GLANCE_DBPASS</replaceable>';</userinput></screen>
<para>Replace <replaceable>GLANCE_DBPASS</replaceable> with a suitable
password.</para>
</step>
<step>
<para>Exit the database access client.</para>
</step>
</substeps>
</step>
<step>
<para>Source the <literal>admin</literal> credentials to gain access to
admin-only CLI commands:</para>
<screen><prompt>$</prompt> <userinput>source admin-openrc.sh</userinput></screen>
</step>
<step>
<para>To create the service credentials, complete these steps:</para>
<substeps>
<step>
<para>Create the <literal>glance</literal> user:</para>
<screen><prompt>$</prompt> <userinput>openstack user create --password-prompt glance</userinput>
<computeroutput>User Password:
Repeat User Password:
+----------+----------------------------------+
| Field | Value |
+----------+----------------------------------+
| email | None |
| enabled | True |
| id | 1dc206e084334db2bee88363745da014 |
| name | glance |
| username | glance |
+----------+----------------------------------+</computeroutput></screen>
</step>
<step>
<para>Add the <literal>admin</literal> role to the
<literal>glance</literal> user and <literal>service</literal>
project:</para>
<screen><prompt>$</prompt> <userinput>openstack role add --project service --user glance admin</userinput>
<computeroutput>+-------+----------------------------------+
| Field | Value |
+-------+----------------------------------+
| id | 1169d778631b4fd1aefd9d35314e1c56 |
| name | admin |
+-------+----------------------------------+</computeroutput></screen>
</step>
<step>
<para>Create the <literal>glance</literal> service entity:</para>
<screen><prompt>$</prompt> <userinput>openstack service create --type image \
--description "OpenStack Image Service" glance</userinput>
<computeroutput>+-------------+----------------------------------+
| Field | Value |
+-------------+----------------------------------+
| description | OpenStack Image Service |
| enabled | True |
| id | 178124d6081c441b80d79972614149c6 |
| name | glance |
| type | image |
+-------------+----------------------------------+</computeroutput></screen>
</step>
</substeps>
</step>
<step>
<para>Create the Image Service API endpoints:</para>
<screen><prompt>$</prompt> <userinput>openstack endpoint create \
--publicurl http://<replaceable>controller</replaceable>:9292 \
--internalurl http://<replaceable>controller</replaceable>:9292 \
--adminurl http://<replaceable>controller</replaceable>:9292 \
--region regionOne \
image</userinput>
<computeroutput>+--------------+----------------------------------+
| Field | Value |
+--------------+----------------------------------+
| adminurl | http://controller:9292 |
| id | 805b1dbc90ab47479111102bc6423313 |
| internalurl | http://controller:9292 |
| publicurl | http://controller:9292 |
| region | regionOne |
| service_id | 178124d6081c441b80d79972614149c6 |
| service_name | glance |
| service_type | image |
+--------------+----------------------------------+</computeroutput></screen>
</step>
</procedure>
<procedure os="ubuntu;rhel;centos;fedora;sles;opensuse">
<title>To install and configure the Image Service components</title>
<note>
<para>Default configuration files vary by distribution. You might need
to add these sections and options rather than modifying existing
sections and options.</para>
</note>
<step>
<para>Install the packages:</para>
<screen os="ubuntu"><prompt>#</prompt> <userinput>apt-get install glance python-glanceclient</userinput></screen>
<screen os="rhel;centos;fedora"><prompt>#</prompt> <userinput>yum install openstack-glance python-glanceclient</userinput></screen>
<screen os="opensuse;sles"><prompt>#</prompt> <userinput>zypper install openstack-glance python-glanceclient</userinput></screen>
</step>
<step>
<para>Edit the <filename>/etc/glance/glance-api.conf</filename>
file and complete the following actions:</para>
<substeps>
<step>
<para>In the <literal>[database]</literal> section, configure
database access:</para>
<programlisting language="ini">[database]
...
connection = mysql://glance:<replaceable>GLANCE_DBPASS</replaceable>@<replaceable>controller</replaceable>/glance</programlisting>
<para>Replace <replaceable>GLANCE_DBPASS</replaceable> with the
password you chose for the Image Service database.</para>
</step>
<step>
<para>In the <literal>[keystone_authtoken]</literal> and
<literal>[paste_deploy]</literal> sections, configure Identity
service access:</para>
<programlisting language="ini">[keystone_authtoken]
...
auth_uri = http://<replaceable>controller</replaceable>:5000
identity_uri = http://<replaceable>controller</replaceable>:35357
admin_tenant_name = service
admin_user = glance
admin_password = <replaceable>GLANCE_PASS</replaceable>
[paste_deploy]
...
flavor = keystone</programlisting>
<para>Replace <replaceable>GLANCE_PASS</replaceable> with the
password you chose for the <literal>glance</literal> user in the
Identity service.</para>
<note>
<para>Comment out any <literal>auth_host</literal>,
<literal>auth_port</literal>, and
<literal>auth_protocol</literal> options because the
<literal>identity_uri</literal> option replaces them.</para>
</note>
</step>
<step>
<para>In the <literal>[glance_store]</literal> section, configure
the local file system store and location of image files:</para>
<programlisting language="ini">[glance_store]
...
default_store = file
filesystem_store_datadir = /var/lib/glance/images/</programlisting>
</step>
<step>
<para>In the <literal>[DEFAULT]</literal> section, configure
the <literal>noop</literal> notification driver to disable
notifications because they only pertain to the optional
Telemetry service:</para>
<programlisting language="ini">[DEFAULT]
...
notification_driver = noop</programlisting>
<para>The Telemetry chapter provides an Image Service configuration
that enables notifications.</para>
</step>
<step>
<para>In the <literal>[DEFAULT]</literal> section, configure the
log file:</para>
<programlisting language="ini">[DEFAULT]
...
log_file = /var/log/glance/api.log</programlisting>
</step>
<step>
<para>(Optional) To assist with troubleshooting,
enable verbose logging in the <literal>[DEFAULT]</literal>
section:</para>
<programlisting language="ini">[DEFAULT]
...
verbose = True</programlisting>
</step>
</substeps>
</step>
<step>
<para>Edit the <filename>/etc/glance/glance-registry.conf</filename>
file and complete the following actions:</para>
<substeps>
<step>
<para>In the <literal>[database]</literal> section, configure
database access:</para>
<programlisting language="ini">[database]
...
connection = mysql://glance:<replaceable>GLANCE_DBPASS</replaceable>@<replaceable>controller</replaceable>/glance</programlisting>
<para>Replace <replaceable>GLANCE_DBPASS</replaceable> with the
password you chose for the Image Service database.</para>
</step>
<step>
<para>In the <literal>[keystone_authtoken]</literal> and
<literal>[paste_deploy]</literal> sections, configure Identity
service access:</para>
<programlisting language="ini">[keystone_authtoken]
...
auth_uri = http://<replaceable>controller</replaceable>:5000
identity_uri = http://<replaceable>controller</replaceable>:35357
admin_tenant_name = service
admin_user = glance
admin_password = <replaceable>GLANCE_PASS</replaceable>
[paste_deploy]
...
flavor = keystone</programlisting>
<para>Replace <replaceable>GLANCE_PASS</replaceable> with the
password you chose for the <literal>glance</literal> user in the
Identity service.</para>
<note>
<para>Comment out any <literal>auth_host</literal>,
<literal>auth_port</literal>, and
<literal>auth_protocol</literal> options because the
<literal>identity_uri</literal> option replaces them.</para>
</note>
</step>
<step>
<para>In the <literal>[DEFAULT]</literal> section, configure
the <literal>noop</literal> notification driver to disable
notifications because they only pertain to the optional
Telemetry service:</para>
<programlisting language="ini">[DEFAULT]
...
notification_driver = noop</programlisting>
<para>The Telemetry chapter provides an Image Service configuration
that enables notifications.</para>
</step>
<step>
<para>In the <literal>[DEFAULT]</literal> section, configure the
log file:</para>
<programlisting language="ini">[DEFAULT]
...
log_file = /var/log/glance/registry.log</programlisting>
</step>
<step>
<para>(Optional) To assist with troubleshooting,
enable verbose logging in the <literal>[DEFAULT]</literal>
section:</para>
<programlisting language="ini">[DEFAULT]
...
verbose = True</programlisting>
</step>
</substeps>
</step>
<step os="rhel;centos;fedora;ubuntu">
<para>Populate the Image Service database:</para>
<screen><prompt>#</prompt> <userinput>su -s /bin/sh -c "glance-manage db_sync" glance</userinput></screen>
</step>
</procedure>
<procedure os="debian">
<title>To install and configure the Image Service components</title>
<step>
<para>Install the packages:</para>
<screen><prompt>#</prompt> <userinput>apt-get install glance python-glanceclient</userinput></screen>
</step>
<step>
<para>Respond to prompts for
<link linkend="debconf-dbconfig-common">database management</link>,
<link linkend="debconf-keystone_authtoken">Identity service
credentials</link>,
<link linkend="debconf-api-endpoints">service endpoint
registration</link>, and
<link linkend="debconf-rabbitmq">message broker
credentials</link>.</para>
</step>
<step>
<para>Select the <literal>keystone</literal> pipeline to configure the
Image Service to use the Identity service:</para>
<mediaobject>
<imageobject>
<imagedata scale="50"
fileref="figures/debconf-screenshots/glance-common_pipeline_flavor.png"
/>
</imageobject>
</mediaobject>
</step>
</procedure>
<procedure>
<title>To finalize installation</title>
<step os="ubuntu;debian">
<para>Restart the Image Service services:</para>
<screen><prompt>#</prompt> <userinput>service glance-registry restart</userinput>
<prompt>#</prompt> <userinput>service glance-api restart</userinput></screen>
</step>
<step os="rhel;centos;fedora;sles;opensuse">
<para>Start the Image Service services and configure them to start when
the system boots:</para>
<screen os="rhel;centos;fedora"><prompt>#</prompt> <userinput>systemctl enable openstack-glance-api.service openstack-glance-registry.service</userinput>
<prompt>#</prompt> <userinput>systemctl start openstack-glance-api.service openstack-glance-registry.service</userinput></screen>
<para os="sles">On SLES:</para>
<screen os="sles"><prompt>#</prompt> <userinput>service openstack-glance-api start</userinput>
<prompt>#</prompt> <userinput>service openstack-glance-registry start</userinput>
<prompt>#</prompt> <userinput>chkconfig openstack-glance-api on</userinput>
<prompt>#</prompt> <userinput>chkconfig openstack-glance-registry on</userinput></screen>
<para os="opensuse">On openSUSE:</para>
<screen os="opensuse"><prompt>#</prompt> <userinput>systemctl enable openstack-glance-api.service openstack-glance-registry.service</userinput>
<prompt>#</prompt> <userinput>systemctl start openstack-glance-api.service openstack-glance-registry.service</userinput></screen>
</step>
<step os="ubuntu">
<para>By default, the Ubuntu packages create an SQLite database.</para>
<para>Because this configuration uses a SQL database server, you can
remove the SQLite database file:</para>
<screen><prompt>#</prompt> <userinput>rm -f /var/lib/glance/glance.sqlite</userinput></screen>
</step>
</procedure>
</section>
View Git Blame Copy Permalink