openstack-manuals/doc/image-guide/locale/zh_CN.po

#
# Translators:
# Alfred <alfredhuang211@qq.com>, 2015
# blkart <blkart.org@gmail.com>, 2015
# johnwoo_lee <lijiangsheng1@gmail.com>, 2015
# 秋林 <chenqioulin_1983@163.com>, 2015
msgid ""
msgstr ""
"Project-Id-Version: OpenStack Manuals\n"
"POT-Creation-Date: 2015-07-15 05:02+0000\n"
"PO-Revision-Date: 2015-07-15 05:03+0000\n"
"Last-Translator: 秋林 <chenqioulin_1983@163.com>\n"
"Language-Team: Chinese (China) (http://www.transifex.com/p/openstack-manuals-"
"i18n/language/zh_CN/)\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_CN\n"
"Plural-Forms: nplurals=1; plural=0;\n"

msgid ""
"(BoolOpt) Should unused base images be removed? When set to True, the "
"interval at which base images are removed are set with the following two "
"settings. If set to False base images are never removed by Compute."
msgstr ""
"（布尔型）未使用的基础镜像是否被删除？ 当设置为 True 的时候，删除未使用的基础"
"镜像的时间间隔在下面两个参数设置。如果设置为 False，基础镜像将一直不被删除。"

msgid ""
"(IntOpt) Unused resized base images younger than this are not removed. "
"Default is 3600 seconds, or one hour."
msgstr ""
"（整数型）未使用且大小改变了的基础镜像镜像文件，低于这个值的不删除。默认是"
"3600秒，或1小时。"

msgid ""
"(IntOpt) Unused unresized base images younger than this are not removed. "
"Default is 86400 seconds, or 24 hours."
msgstr ""
"（整数型），未使用以及未修改大小的镜像，低于这个值，不删除。默认是86400秒，或"
"24小时。"

msgid "(StrOpt) VM image preallocation mode:"
msgstr "（字符串型）虚拟机镜像预分配模式："

msgid "(Type) Description"
msgstr "(类型) 描述"

msgid "..."
msgstr "..."

msgid "2013"
msgstr "2013"

msgid "2013-05-28"
msgstr "2013-05-28"

msgid "2013-06-04"
msgstr "2013-06-04"

msgid "2013-10-17"
msgstr "2013-10-17"

msgid "2013-10-25"
msgstr "2013-10-25"

msgid "2014"
msgstr "2014"

msgid "2014-04-17"
msgstr "2014-04-17"

msgid "2014-10-15"
msgstr "2014-10-15"

msgid "2015"
msgstr "2015"

msgid ""
"<link xlink:href=\"http://boxgrinder.org/\">BoxGrinder</link> is another "
"tool for creating virtual machine images, which it calls appliances. "
"BoxGrinder can create Fedora, Red Hat Enterprise Linux, or CentOS images. "
"BoxGrinder is currently only supported on Fedora."
msgstr ""
"<link xlink:href=\"http://boxgrinder.org/\">BoxGrinder</link> 是另外一个创建"
"虚拟机镜像的工具，也称器具。BoxGrinder 可以创建 Fedora, Red Hat Enterprise "
"Linux, 或者 CentOS 镜像。BoxGrinder当前只支持在 Fedora 上运行。"

msgid ""
"<link xlink:href=\"http://docs.openstack.org/developer/diskimage-builder/"
"\">Diskimage-builder</link> is an automated disk image creation tool that "
"supports a variety of distributions and architectures. Diskimage-builder "
"(DIB) can build images for Fedora, Red Hat Enterprise Linux, Ubuntu, Debian, "
"CentOS, and openSUSE. DIB is organized in a series of elements that build on "
"top of each other to create specific images."
msgstr ""
"<link xlink:href=\"http://docs.openstack.org/developer/diskimage-builder/\"> "
"镜像生成器 </link> 是一个支持不同发行版以及体系架构的自动化磁盘镜像创建工具。"
"镜像生成器（DIB）能为 Fedora, Red Hat Enterprise Linux, Ubuntu, Debian, "
"CentOS, and openSUSE 生成镜像，DIB 是被组合一系列的工具之上的创建特殊镜像的基"
"础。"

msgid ""
"<link xlink:href=\"http://imgfac.org/\">imagefactory</link> is a newer tool "
"designed to automate the building, converting, and uploading images to "
"different cloud providers. It uses Oz as its back-end and includes support "
"for OpenStack-based clouds."
msgstr ""
"<link xlink:href=\"http://imgfac.org/\">imagefactory</link> 是一个设计为自动"
"化创建，转换以及上传镜像到不同云提供商的较新的工具。他使用 Oz 做为后端，并支"
"持包含基于 OpenStack 的云。"

msgid ""
"<link xlink:href=\"http://susestudio.com\">SUSE Studio</link> is a web "
"application for building and testing software applications in a web browser. "
"It supports the creation of physical, virtual or cloud-based applications "
"and includes support for building images for OpenStack based clouds using "
"SUSE Linux Enterprise and openSUSE as distributions."
msgstr ""
"<link xlink:href=\"http://susestudio.com\">SUSE Studio</link> 是创建和测试软"
"件程序的基于浏览器的 web 程序。他支持创建物理，虚拟或者基于云端的应用程序，并"
"且支持使用SUSE Linux Enterprise and openSUSE 发行版为基于 Openstack 的云创建"
"镜像。"

msgid ""
"<link xlink:href=\"https://github.com/clalancette/oz/wiki\">Oz</link> is a "
"command-line tool that automates the process of creating a virtual machine "
"image file. Oz is a Python app that interacts with KVM to step through the "
"process of installing a virtual machine. It uses a predefined set of "
"kickstart (Red Hat-based systems) and preseed files (Debian-based systems) "
"for operating systems that it supports, and it can also be used to create "
"Microsoft Windows images. On Fedora, install Oz with yum:"
msgstr ""
"<link xlink:href=\"https://github.com/clalancette/oz/wiki\">Oz</link> 是一个"
"自动化创建镜像文件的命令行工具。它是一个和 KVM 进行交互完成整个虚拟机镜像安装"
"过程的 Python 程序。它使用操作系统支持的一系列预定义的 kickstart (红帽系)文件"
"或 preseed 文件 （Debian 系），并且他也用于创建微软 Windows 镜像。在 Fedora "
"上,使用 yum 安装 Oz:"

msgid ""
"<link xlink:href=\"https://github.com/jedi4ever/veewee\"> VeeWee</link> is "
"often used to build <link xlink:href=\"http://vagrantup.com\">Vagrant</link> "
"boxes, but it can also be used to build KVM images."
msgstr ""
"<link xlink:href=\"https://github.com/jedi4ever/veewee\"> VeeWee</link> 通常"
"用于创建  <link xlink:href=\"http://vagrantup.com\">Vagrant</link> boxses，但"
"它也可用于创建 KVM 镜像。"

msgid ""
"<link xlink:href=\"https://launchpad.net/vmbuilder\">VMBuilder</link> "
"(Virtual Machine Builder) is a command-line tool that creates virtual "
"machine images for different hypervisors. The version of VMBuilder that "
"ships with Ubuntu can only create Ubuntu virtual machine guests. The version "
"of VMBuilder that ships with Debian can create Ubuntu and Debian virtual "
"machine guests."
msgstr ""
"<link xlink:href=\"https://launchpad.net/vmbuilder\">VMBuilder</link> (虚拟机"
"生成器) 是一个可为不同 hypervisors 生成虚拟机镜像的命令行工具。Ubuntu 带的 "
"VMBuilder 版本只能创建 Ubuntu 虚拟机。 Debian 带的 VMBuilder 版本能创建 "
"Ubuntu 以及 Debian 虚拟机。"

msgid ""
"<link xlink:href=\"https://packer.io\"> Packer</link> is a tool for creating "
"machine images for multiple platforms from a single source configuration."
msgstr ""
"<link xlink:href=\"https://packer.io\"> Packer</link> 是使用单一源配置生成不"
"同平台虚拟机镜像的工具。"

msgid "<literal>aki</literal>. An Amazon kernel image."
msgstr "<literal>aki</literal>. Amazon 内核镜像。"

msgid "<literal>ami</literal>. An Amazon machine image."
msgstr "<literal>ami</literal>. Amazon 虚机镜像。"

msgid "<literal>ari</literal>. An Amazon ramdisk image."
msgstr "<literal>ari</literal>. Amazon ramdisk 镜像。"

msgid ""
"<literal>auto_disk_config=True</literal> is set as a property on the image "
"in the image registry."
msgstr "在镜像的属性设置了 <literal>auto_disk_config=True</literal> 。"

msgid ""
"<literal>bare</literal>. The image does not have a container or metadata "
"envelope."
msgstr "<literal>bare</literal>. 镜像没有容器或者没有封装metadata数据。"

msgid "<literal>none</literal>. No storage provisioning occurs up front."
msgstr "<literal>none</literal>。不分配存储。"

msgid "<literal>ovf</literal>. The OVF container format."
msgstr "<literal>ovf</literal>. OVF容器格式。"

msgid ""
"<package>cloud-initramfs-growroot</package> package for Centos and RHEL."
msgstr "Centos 和 RHEL 上使用<package>cloud-initramfs-growroot</package>"

msgid ""
"<placeholder-1/> does not mount the image directly into the local file "
"system. Instead, it provides you with a shell interface that enables you to "
"view, edit, and delete files. Many of <placeholder-2/> commands, such as "
"<placeholder-3/>, <placeholder-4/>, and <placeholder-5/>, resemble "
"traditional bash commands."
msgstr ""
"<placeholder-1/>并不直接mount镜像文件到本地文件系统，而是提供一个shell接口，"
"你可以通过这个shell接口对镜像内文件做查看，编辑，删除操作，诸如 "
"<placeholder-3/>, <placeholder-4/>,  和 <placeholder-5/>的 <placeholder-2/> "
"命令，就像普通bash命令一样。"

msgid ""
"<placeholder-1/>We want to edit the <filename>ifcfg-eth0</filename> file to "
"remove the <literal>HWADDR</literal> line. The <placeholder-2/> command will "
"copy the file to the host, invoke your editor, and then copy the file back. "
"<placeholder-3/>"
msgstr ""
"<placeholder-1/>我们想编辑 <filename>ifcfg-eth0</filename> 文件以便删除 "
"<literal>HWADDR</literal> 这一行。<placeholder-2/>命令将文件拷贝文件到主机，"
"调用编辑器打开文件，编辑完后将它又拷贝回原来的位置。<placeholder-3/>"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/centos-complete.png'; md5=1b2c6a2e45a9ae52a5f6338ae74b1e54"
msgstr ""
"@@image: 'figures/centos-complete.png'; md5=1b2c6a2e45a9ae52a5f6338ae74b1e54"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/centos-install.png'; md5=013b5be9e167ee27e674859ba4869d89"
msgstr ""
"@@image: 'figures/centos-install.png'; md5=013b5be9e167ee27e674859ba4869d89"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/centos-tcpip.png'; md5=fe0324d0d74368d1920c243fd72747fd"
msgstr ""
"@@image: 'figures/centos-tcpip.png'; md5=fe0324d0d74368d1920c243fd72747fd"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/freebsd-partitions.png'; "
"md5=47dbba18dda83b095f370a71e1dc3413"
msgstr ""
"@@image: 'figures/freebsd-partitions.png'; "
"md5=47dbba18dda83b095f370a71e1dc3413"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/install-method.png'; md5=1d60286d52f6b385a5d15ae042858893"
msgstr ""
"@@image: 'figures/install-method.png'; md5=1d60286d52f6b385a5d15ae042858893"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/ubuntu-finished.png'; md5=750be1d6a71b4186be563c049043e3a4"
msgstr ""
"@@image: 'figures/ubuntu-finished.png'; md5=750be1d6a71b4186be563c049043e3a4"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/ubuntu-grub.png'; md5=e46a46bd4044483da7cd07de2ff1ddbc"
msgstr ""
"@@image: 'figures/ubuntu-grub.png'; md5=e46a46bd4044483da7cd07de2ff1ddbc"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/ubuntu-install.png'; md5=999f5b14528b82401dbe04dce8779f4c"
msgstr ""
"@@image: 'figures/ubuntu-install.png'; md5=999f5b14528b82401dbe04dce8779f4c"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid ""
"@@image: 'figures/ubuntu-software-selection.png'; "
"md5=423be828f701345f7d20551a39f24271"
msgstr ""
"@@image: 'figures/ubuntu-software-selection.png'; "
"md5=423be828f701345f7d20551a39f24271"

#. When image changes, this message will be marked fuzzy or untranslated for
#. you.
#. It doesn't matter what you translate it to: it's not used at all.
msgid "@@image: 'figures/url-setup.png'; md5=b2f3b4a3552ad175575f5eb78e63dfd8"
msgstr "@@image: 'figures/url-setup.png'; md5=b2f3b4a3552ad175575f5eb78e63dfd8"

msgid ""
"A UEC (Ubuntu Enterprise Cloud) tarball is a gzipped tarfile that contains "
"an AMI file, AKI file, and ARI file.<placeholder-1/>"
msgstr "UEC（Ubuntu 企业云） 文件是一个包含了 AMI AKI ARI文件的tar包压缩文件。"

msgid ""
"A full treatment of Oz is beyond the scope of this document, but we will "
"provide an example. You can find additional examples of Oz template files on "
"GitHub at <link xlink:href=\"https://github.com/rackerjoe/oz-image-build/"
"tree/master/templates\">rackerjoe/oz-image-build/templates</link>. Here's "
"how you would create a CentOS 6.4 image with Oz."
msgstr ""
"完整的 Oz 示例 已经超出本文档范围，但是我们提供一个示例。你可以在 GitHub "
"<link xlink:href=\"https://github.com/rackerjoe/oz-image-build/tree/master/"
"templates\">rackerjoe/oz-image-build/templates</link>.查找到额外的 Oz 模板文"
"件。下面演示了使用 Oz 如何创建 CentOS 6.4 镜像。"

msgid ""
"A kernel file that the hypervisor will load initially to boot the image. For "
"a Linux machine, this would be a <emphasis>vmlinuz</emphasis> file."
msgstr ""
"虚拟化启动镜像时最先加载的内核文件。对 Linux 机器，对应的应该是"
"<emphasis>vmlinuz</emphasis> 文件。"

msgid ""
"A virtual machine image is a single file which contains a virtual disk that "
"has a bootable operating system installed on it."
msgstr ""
"一个虚拟机镜像是一个文件，文件内包含了已经安装好可启动操作系统的虚拟磁盘。"

msgid "AKI (Amazon Kernel Image)"
msgstr "AKI (亚马逊内核镜像)"

msgid "AMI (Amazon Machine Image):"
msgstr "AMI (亚马逊虚机镜像):"

msgid "AMI/AKI/ARI"
msgstr "AMI/AKI/ARI"

msgid "ARI (Amazon Ramdisk Image)"
msgstr "ARI (亚马逊 Ramdisk 镜像)"

msgid ""
"Accept the default keymap or select an appropriate mapping for your needs."
msgstr "接受默认键盘分布或者根据需要选择适当的键盘映射。"

msgid "Accept the default network mirror."
msgstr "接受默认的网络镜像。"

msgid "Access instance by using ssh public key (cloud-init)"
msgstr "使用 SSH 公钥（cloud-init）访问虚拟机"

msgid "Access instance using ssh public key (<package>cloud-init</package>)"
msgstr "使用SSH 公钥访问虚拟机  (<package>cloud-init</package>)"

msgid "Adds information about image formats, properties."
msgstr "添加镜像格式，属性相关信息。"

msgid ""
"After Oz completes the initial OS install using the kickstart file, it "
"customizes the image with an update. It also removes any reference to the "
"eth0 device that libvirt creates while Oz does the customizing, as specified "
"in the <literal>command</literal> section of the XML file."
msgstr ""
"在 Oz 使用kickstart文件完成系统初始安装后，它通过更新镜像内容来定制镜像文件。"
"定制的过程它通过 在XML 文件中的 <literal>command</literal> 字段也删除任何关于"
"eth0设备的信息。"

msgid ""
"After you exit, you can open a shell to complete manual configuration steps. "
"Select <guibutton>Yes</guibutton> to make a few OpenStack-specific changes:"
msgstr ""
"在退出后，你可以打开一个shell完成手工配置，选择 <guibutton>Yes</guibutton> 完"
"成一些OpenStack特定的修改："

msgid ""
"All associated properties for an image can be displayed using the "
"<placeholder-1/> command. For example:"
msgstr "镜像的所有相关联的属性可以使用 <placeholder-1/> 命令显示。例如："

msgid ""
"An OVF package can be distributed in different ways. For example, it could "
"be distributed as a set of discrete files, or as a tar archive file with an ."
"ova (open virtual appliance/application) extension."
msgstr ""
"OVF 包可通过几种方式分发，例如，可以通过一系列分散的文件分发或者通过一个tar归"
"档文件（.ova后缀）分发。"

msgid ""
"An OpenStack Compute cloud is not very useful unless you have virtual "
"machine images (which some people call \"virtual appliances\"). This guide "
"describes how to obtain, create, and modify virtual machine images that are "
"compatible with OpenStack."
msgstr ""
"在你拥有虚拟机镜像（也有人叫\"虚拟器件\"）之前，你的 OpenStack 计算云不太有"
"用，这个指南描述了如何获取，创建以及修改 OpenStack 兼容的虚拟机镜像。"

msgid ""
"An instance must interact with the metadata service to perform several tasks "
"on start up. For example, the instance must get the ssh public key and run "
"the user data script. To ensure that the instance performs these tasks, use "
"one of these methods:"
msgstr ""
"虚拟机在启动的时候需要和元数据服务交互以便完成几个任务，例如，虚拟机必须获取"
"ssh公钥以及运行用户数据脚本。确保虚拟机能完成这些任务，使用以下几个方法之一："

msgid ""
"An optional ramdisk file mounted at boot time. For a Linux machine, this "
"would be an <emphasis>initrd</emphasis> file."
msgstr ""
"系统启动时可选的 ramdisk 文件，对 Linux 机器，对应的是 <emphasis>initrd</"
"emphasis> 文件。"

msgid "Argument to qemu-img"
msgstr "qemu-img 参数"

msgid ""
"As of this writing, there are no Oz packages for Ubuntu, so you will need to "
"either install from the source or build your own .deb file."
msgstr ""
"在本文档编写时，没有针对 Ubuntu 的 Oz 安装包，因此你需要从源代码安装或者编译"
"自己的.deb文件包。"

msgid ""
"As of this writing, we are not aware of other distributions that provide "
"images for download."
msgstr "在本文档编写时，我们并未发现其他Linux发行版提供镜像下载。"

msgid ""
"Assume that the name of your virtual machine image is <literal>ubuntu-14.04</"
"literal>, which you need to know when you use <placeholder-1/> commands to "
"manipulate the state of the image."
msgstr ""
"假设你的虚拟机名称是 <literal> trusty </literal> ，当你使用 <placeholder-1/> "
"命令操作虚拟机状态的时候你需要虚拟机名称。"

msgid ""
"Assume that you have a CentOS qcow2 image called <filename>centos63_desktop."
"img</filename>. Mount the image in read-write mode as root, as follows:"
msgstr ""
"假设你有一个文件名为<filename>centos63_desktop.img</filename>的 CentOS qcow2 "
"格式的虚拟机镜像。用root用户挂载这个镜像为可读可写模式，如下："

msgid "Assume that:"
msgstr "假设："

msgid ""
"Assuming the first block device (<filename>/dev/nbd0</filename>) is not "
"currently in use, we can expose the disk partitions using the <placeholder-1/"
"> and <placeholder-2/> commands. As root:<placeholder-3/>"
msgstr ""
"假设第一个块设备(<filename>/dev/nbd0</filename>)当前未被占用，我们使用"
"<placeholder-1/>  和  <placeholder-2/> 列出磁盘分区。以root用户执行："
"<placeholder-3/>"

msgid ""
"At the initial Installer boot menu, choose the <guilabel>Install or upgrade "
"an existing system</guilabel> option. Step through the installation prompts. "
"Accept the defaults."
msgstr ""
"在最开始的安装启动菜单，选择 <guilabel>Install or upgrade an existing "
"system</guilabel> ，这事默认的。"

msgid ""
"At the initial Installer boot menu, choose the <guilabel>Install</guilabel> "
"option. Step through the install prompts, the defaults should be fine."
msgstr ""
"在安装初始启动菜单中，选择  <guilabel>Install</guilabel>  。安装过程提示中，"
"默认的即可。"

msgid "Automatic updates"
msgstr "自动更新"

msgid ""
"Because 86400 seconds (24 hours) is the default time for "
"<literal>remove_unused_original_minimum_age_seconds</literal>, you can "
"either wait for that time interval to see the base image removed, or set the "
"value to a shorter time period in <filename>nova.conf</filename>. Restart "
"all nova services after changing a setting in <filename>nova.conf</filename>."
msgstr ""
"由于 <literal>remove_unused_original_minimum_age_seconds</literal> 的值默认是"
"86400秒（24小时），你可以等待这个时间间隔来查看基础镜像是否被删除，或者在  "
"<filename>nova.conf</filename> 内设置更短的时间间隔。修改  <filename>nova."
"conf</filename> 后，重启所有的 nova 服务。"

msgid ""
"Because qcow2 is sparse, qcow2 images are typically smaller than raw images. "
"Smaller images mean faster uploads, so it's often faster to convert a raw "
"image to qcow2 for uploading instead of uploading the raw file directly."
msgstr ""
"因为qcow2 镜像是稀疏的，因此，qcow2镜像通常比裸格式镜像小，更小的文件意味着上"
"传更快，因此通常转换裸格式镜像到qcow2格式上传比直接上传裸格式镜像文件更快。"

msgid ""
"Because raw images don't support snapshots, OpenStack Compute will "
"automatically convert raw image files to qcow2 as needed."
msgstr ""
"因为裸格式镜像不支持快照，OpenStack 计算节点在需要的时候将会自动转换裸格式镜"
"像到qcow2格式。"

msgid ""
"Because the default does not work, you must select manual partitioning. The "
"partition editor should list only one block device. If you use virtio for "
"the disk device driver, it is named <literal>vtbd0</literal>. Select this "
"device and run the <placeholder-1/> command three times:"
msgstr ""
"因为默认的分区会导致bsd-cloudinit不能正常工作，你必须手工分区，分区编辑器仅列"
"出块设备，如果你使用 virtio 磁盘驱动，它名称是 <literal>vtbd0</literal>。选择"
"这个设备运行 <placeholder-1/> 三次："

msgid ""
"Before starting a virtual machine with libvirt, verify that the libvirt "
"\"default\" network has been started. This network must be active for your "
"virtual machine to be able to connect out to the network. Starting this "
"network will create a Linux bridge (usually called <literal>virbr0</"
"literal>), iptables rules, and a dnsmasq process that will serve as a DHCP "
"server."
msgstr ""
"在使用 libvirt 启动虚拟机前，检查它的  \"default\" 默认网络是否启动。虚拟机要"
"连接到外网，它的默认网络必须激活。启动 libvirt 默认网络将创建 linux 网桥( 通"
"常名称是<literal>virbr0</literal> )，iptables 规则，以及dhcp服务器进程 "
"dnsmasq 。"

msgid "BoxGrinder"
msgstr "BoxGrinder"

msgid ""
"By using the same hypervisor, you can ensure that you emulate the same "
"devices that exist in production. However, if you use full hardware "
"virtualization instead of paravirtualization, you do not need to use the "
"same hypervisor; you must use the same type of virtualized hardware because "
"FreeBSD device names are related to their drivers. If the name of your root "
"block device or primary network interface in production differs than the "
"names used during image creation, errors can occur."
msgstr ""
"通过使用相同的虚拟化层，可以确保仿照你生产环境相同的虚拟设备，然而，如果你有"
"硬件虚拟化代替半虚拟化，可以不需要相同的虚拟化层；你必须使用相同类型的虚拟化"
"硬件因为 FreeBSD 设备名和驱动相关联。如果创建镜像环境中根块设备或者第一个网卡"
"和你生产环境不一样，那么在生产环境中使用镜像会产生错误。"

msgid "CentOS directory: <literal>centos/6/os/x86_64</literal>"
msgstr "CentOS 目录： <literal>centos/6/os/x86_64</literal>"

msgid ""
"Choose \"OpenSSH server\" so that you will be able to SSH into the virtual "
"machine when it launches inside of an OpenStack cloud."
msgstr ""
"选择  \"OpenSSH server\"  以便在 OpenStack 中启动虚拟机时你能 SSH 登陆到虚拟"
"机。"

msgid "Choose URL as the installation method."
msgstr "选择 URL 安装方法。"

msgid "Choose the VNC or text mode to set the installation options."
msgstr "安装选项选择 VNC 或者 文本模式。"

msgid "CirrOS (test) images"
msgstr "CirrOS (测试镜像) "

msgid "Clean up (remove MAC address details)"
msgstr "清理（删除 MAC 地址相关信息）"

msgid "Clean up and remove MAC address details."
msgstr "清除和删除 MAC 地址。"

msgid "Clean up when you're done:"
msgstr "当完成操作后，清理命令“"

msgid ""
"Click one of the <literal>HTTP</literal> links in the right-hand column next "
"to one of the mirrors."
msgstr "单击镜像中靠近右变的一列的其中一个 <literal>HTTP</literal> 链接。"

msgid ""
"Click the \"New\" button at the top-left and step through the instructions. "
"<placeholder-1/>You will be shown a series of dialog boxes that will allow "
"you to specify information about the virtual machine."
msgstr ""
"点击 左上方的   \"New\" 按钮并跟随接下来的向导。<placeholder-1/>，你将看到一"
"系列允许你指定虚拟机的详细信息的的对话框。"

msgid "Click the <literal>isos/</literal> folder link."
msgstr "点击<literal>isos/</literal> 文件夹的链接。"

msgid "Click the <literal>x86_64/</literal> folder link for 64-bit images."
msgstr "要下载64位的文件点击  <literal>x86_64/</literal> 文件夹链接。"

msgid ""
"Click the folder link of the CentOS version that you want to use. For "
"example, <literal>6.4/</literal>."
msgstr ""
"单击要使用的CentOS版本的文件夹链接。例如， <literal> 6.4 / </literal> 。"

msgid ""
"Click the netinstall ISO image that you want to download. For example, "
"<filename>CentOS-6.4-x86_64-netinstall.iso</filename> is a good choice "
"because it is a smaller image that downloads missing packages from the "
"Internet during installation."
msgstr ""
"点击你想下载的网络安装ISO镜像文件，例如： <filename>CentOS-6.4-x86_64-"
"netinstall.iso</filename> 就是一个好的选择，因为它文件尺寸更小，在安装的时"
"候，其余的包可以通过网络下载。"

msgid ""
"Complete the VirtIO drivers installation by running the following command:"
msgstr "使用以下命令完成VirtIO驱动的安装："

msgid ""
"Compute's <systemitem>ImagePropertiesFilter</systemitem> value is specified "
"in the <placeholder-1/> value in the <filename>/etc/nova/nova.conf</"
"filename> file."
msgstr ""
"计算节点的  <systemitem>ImagePropertiesFilter</systemitem> 值在 <filename>/"
"etc/nova/nova.conf</filename> 文件的 <placeholder-1/> 参数设定。"

msgid "Configuration option=Default value"
msgstr "配置属性=默认值"

msgid "Configure TCP/IP"
msgstr "配置 TCP/IP"

msgid "Configure console"
msgstr "配置 console"

msgid ""
"Configure the primary network interface to use DHCP. In this example, which "
"uses a virtio network device, this interface is named <literal>vtnet0</"
"literal>."
msgstr ""
"配置首选网卡使用DHCP，在这个示例中，使用 virtio 网卡，在虚拟机中命名为 "
"<literal>vtnet0</literal>。"

msgid "Configure to fetch metadata"
msgstr "配置获取metadata"

msgid ""
"Consider using other mirrors as an alternative to <literal>mirror.umd.edu</"
"literal>."
msgstr ""
"考虑使用其他镜像作为 <literal>mirror.umd.edu</literal> 的替代，国内推荐使用"
"mirrors.163.com ."

msgid "Container formats"
msgstr "容器格式"

msgid "Converting between image formats"
msgstr "转换镜像格式"

msgid ""
"Converting images from one format to another is generally straightforward."
msgstr "转换一种镜像格式到另一种通常是直接的。"

msgid "Create a 15GB qcow2 image:"
msgstr "创建一个15GB大小的磁盘镜像："

msgid ""
"Create a new LVM partition with the additional space. For example, "
"<placeholder-1/>."
msgstr "在额外的空间上创建 LVM 分区。例如：<placeholder-1/> 。"

msgid "Create a new physical volume. For example, <placeholder-1/>."
msgstr "创建新的物理卷(PV)。例如： <placeholder-1/> 。"

msgid ""
"Create a template file (we'll call it <filename>centos64.tdl</filename>) "
"with the following contents. The only entry you will need to change is the "
"<literal>&lt;rootpw&gt;</literal> contents."
msgstr ""
"使用以下内容创建模板文件（我们叫做 <filename>centos64.tdl</filename>）。你仅"
"仅需要修改  <literal>&lt;rootpw&gt;</literal> 部分的内容。"

msgid "Create images manually"
msgstr "手动创建镜像"

msgid "Create two partitions:<placeholder-1/>"
msgstr "创建两个分区：<placeholder-1/>"

msgid ""
"Creating a new image is a step done outside of your OpenStack installation. "
"You create the new image manually on your own system and then upload the "
"image to your cloud."
msgstr ""
"创建新的虚拟机镜像是安装完 OpenStack 意外的事情。你在你的系统上手工创建新虚拟"
"机镜像并且上传到云。"

msgid "Detach the CD-ROM and reboot"
msgstr "卸载 CD-ROM 并重启"

msgid ""
"Detect if any additional space is available on the disk. For example, parse "
"the output of <placeholder-1/>."
msgstr "检查磁盘额外可用空间。例如，解析 <placeholder-1/> 的输出。"

msgid "Disable firewall"
msgstr "禁用防火墙"

msgid ""
"Disable the default <literal>zeroconf</literal> route for the instance to "
"access the metadata service:"
msgstr "禁用默认的 <literal>zeroconf</literal> 路由。"

msgid "Disable the zeroconf route"
msgstr "禁用 zeroconf 路由"

msgid "Disk and container formats for images"
msgstr "镜像的磁盘格式和镜像的容器格式"

msgid "Disk formats"
msgstr "磁盘格式"

msgid ""
"Disk partitioning is a critical element of the image creation process and "
"the auto-generated default partitioning scheme does not work with "
"<application>bsd-cloudinit</application> at this time."
msgstr ""
"磁盘分区在镜像创建过程中是一个重要的要素，它自动产生默认的分区表会导致 "
"<application>bsd-cloudinit</application> 不起作用。"

msgid ""
"Disk partitions and resize root partition on boot (<package>cloud-init</"
"package>)"
msgstr "磁盘分区以及在启动时调整根分区大小 (<package>cloud-init</package>)"

msgid "Disk partitions and resize root partition on boot (cloud-init)"
msgstr "磁盘分区以及在启动时调整根分区大小 (<package>cloud-init</package>)"

msgid "Diskimage-builder"
msgstr "镜像生成器"

msgid ""
"Do not attempt to use these tools to modify an image that is attached to a "
"running virtual machine. These tools are designed to only modify images that "
"are not currently running."
msgstr ""
"不要使用这些工具修改正在运行的虚拟机镜像，这些工具被设计成只能修改未运行的虚"
"拟机镜像。"

msgid "Download a CentOS install ISO"
msgstr "下载 CentOS 安装 ISO"

msgid "Download an Ubuntu install ISO"
msgstr "下载一个 Ubuntu 安装 ISO"

msgid "Download and install Cloudbase-Init:"
msgstr "下载并安装 Cloudbase-Init："

msgid ""
"Download the latest <application>bsd-cloudinit-installer</application>. The "
"download commands differ between FreeBSD 10.0 and 9.2 because of differences "
"in how the <placeholder-1/> command handles HTTPS URLs."
msgstr ""
"下载最新版本的 <application>bsd-cloudinit-installer</application> 。 FreeBSD "
"10.0 和 9.2的命令不同之处在于<placeholder-1/> 命令处理HTTPS URL不同。"

msgid "Enable the VirtIO drivers."
msgstr "启用 VirtIO 驱动"

msgid "Ensure image writes boot log to console"
msgstr "确认镜像输出启动日志到控制台"

msgid "Ensure ssh server runs"
msgstr "确保 ssh 服务在运行"

msgid "Example guestfish session"
msgstr "guestfish 修改示例："

msgid "Example: CentOS image"
msgstr "示例：CentOS 镜像"

msgid "Example: Fedora image"
msgstr "示例：Fedora 镜像"

msgid "Example: FreeBSD image"
msgstr "示例：FreeBSD 镜像"

msgid "Example: Microsoft Windows image"
msgstr "示例：微软Windows镜像"

msgid "Example: Ubuntu image"
msgstr "示例：Ubuntu 镜像"

msgid ""
"Extend the logical volume contained the root partition by the amount of "
"space. For example, <placeholder-1/>."
msgstr "使用分区所有空间扩展包含根分区的逻辑卷（LV）。例如，<placeholder-1/>。"

msgid ""
"Extend the volume group with this physical partition. For example, "
"<placeholder-1/>."
msgstr "使用这个屋里分区扩展卷组（VG）。例如： <placeholder-1/> 。"

msgid "Final config"
msgstr "Final config"

msgid "First partition: A 64kB freebsd-boot partition with no mount point."
msgstr "第一个分区：一个64kB freebsd 启动分区，无挂载点。"

msgid "Follow these steps to prepare the installation:"
msgstr "按照这些步骤做安装前准备："

msgid ""
"For example, to mount the root partition from our <filename>centos63_desktop."
"qcow2</filename> image to <filename>/mnt</filename>, we can do:"
msgstr ""
"例如，挂载 <filename>centos63_desktop.qcow2</filename>镜像内的根分区到 "
"<filename>/mnt</filename>目录，可以敲以下命令："

msgid ""
"For some types of changes, you may find it easier to mount the image's file "
"system directly in the guest. The <placeholder-1/> program, also from the "
"libguestfs project, allows you to do so."
msgstr ""
"对于某些类型的修改，你可以使用更简单的方式直接挂载镜像内文件系统。"
"<placeholder-1/> 程序，同样出自于 libguestfs 项目。"

msgid ""
"For the <placeholder-1/> command to work properly on CentOS 6."
"<replaceable>x</replaceable>, you might need to add the following lines to "
"the <filename>/boot/grub/menu.lst</filename> file:"
msgstr ""
"要使  <placeholder-1/> 命令在  CentOS 6.<replaceable>x</replaceable> 生效 ,你"
"需要添加以下文字到 <filename>/boot/grub/menu.lst</filename> 文件："

msgid ""
"For the <placeholder-1/> command to work properly on Fedora 20, you might "
"need to add the following lines to the <filename>/boot/grub/menu.lst</"
"filename> file:"
msgstr ""
"要让 <placeholder-1/> 命令在 Fedora 20虚拟机上，你需要编辑 <filename>/boot/"
"grub/menu.lst</filename> 文件添加以下几行。"

msgid ""
"For the instance to access the metadata service, you must disable the "
"default zeroconf route:"
msgstr "要让虚拟机访问元数据服务，必须禁用 zeroconf  路由："

msgid ""
"FreeBSD 9.2 <placeholder-1/> does not support peer-verification for https. "
"For FreeBSD 9.2, run this command:"
msgstr ""
"FreeBSD 9.2 <placeholder-1/> 不支持https对端认证,FreeBSD 9.2运行以下命令"

msgid "From inside the instance, as root:"
msgstr "在虚拟机内，以root用户运行："

msgid ""
"From the list of services to start on boot, you must select <systemitem "
"class=\"service\">ssh</systemitem>. Optionally, select other services."
msgstr ""
"从启动时需要启动的服务列表中选择 <systemitem class=\"service\">ssh</"
"systemitem> 。以及可选的其他服务。"

msgid ""
"Further customization could be accomplished by setting environment variables "
"or adding elements to the command-line:"
msgstr "更进一步的镜像定制可以通过设置环境变量或者添加元素到命令行："

msgid "Get images"
msgstr "获取镜像"

msgid "Get the installer ISO:"
msgstr "获取安装ISO文件："

msgid "Go further with guestfish"
msgstr "guestfish更多功能"

msgid "Havana release."
msgstr "Havana发行版。"

msgid "Hostname"
msgstr "主机名"

msgid "ISO"
msgstr "ISO"

msgid ""
"If <literal>console=ttyS0</literal> does not appear, you must modify your "
"grub configuration. In general, you should not update the <filename>grub."
"cfg</filename> directly, since it is automatically generated. Instead, you "
"should edit <filename>/etc/default/grub</filename> and modify the value of "
"the <literal>GRUB_CMDLINE_LINUX_DEFAULT</literal> variable: <placeholder-1/>"
msgstr ""
"如果 <literal>console=ttyS0</literal> 不存在，你需要修改 grub 配置，通常，你"
"不应该直接更新  <filename>grub.cfg</filename>  文件，因为它是程序自动生成的。"
"作为替代的，你应该编辑  <filename>/etc/default/grub</filename> 文件并修改  "
"<literal>GRUB_CMDLINE_LINUX_DEFAULT</literal> 的值： <placeholder-1/>"

msgid ""
"If prompted about which type of devices your installation uses, choose "
"<guilabel>Basic Storage Devices</guilabel>."
msgstr ""
"如果提示你使用哪种类型存储设备，选择  <guilabel>Basic Storage Devices</"
"guilabel>。 "

msgid ""
"If the account you use to ssh into your server does not have permissions to "
"run libvirt, but has sudo privileges, do:<placeholder-1/><placeholder-2/>"
msgstr ""
"如果你的账户没有权限和libirt交互，但是有 sudo 权限，运行：<placeholder-1/"
"><placeholder-2/>"

msgid ""
"If the image has multiple partitions, use <placeholder-1/> to expose the "
"partitions as separate devices (for example, <filename>/dev/mapper/loop0p1</"
"filename>), then mount the partition that corresponds to the root file "
"system:<placeholder-2/>"
msgstr ""
"如果镜像有多个分区，使用<placeholder-1/>显示分区为单独的设备（如：<filename>/"
"dev/mapper/loop0p1</filename>），然后挂载对应根文件系统的分区："
"<placeholder-2/>"

msgid ""
"If the image has, say three partitions (/boot, /, swap), there should be one "
"new device created for each partition:"
msgstr ""
"如果镜像有三个分区（/boot, /, swap），对应的每个分区应该有新设备文件建立："

msgid ""
"If the image has, say three partitions (/boot, /, swap), there should be one "
"new device created per partition:<placeholder-1/>To mount the second "
"partition, as root:<placeholder-2/>Once you're done, to clean up:"
"<placeholder-3/>"
msgstr ""
"如果镜像显示有三个分区，对应的每个分区会有新的设备文件创建：<placeholder-1/> "
"要挂载第二个分区，用 root 执行：<placeholder-2/> 当所有操作完成后，清理操作："
"<placeholder-3/>"

msgid ""
"If the image only has a single partition, you can mount the loop device "
"directly:<placeholder-1/>"
msgstr "如果镜像只有一个分区，你可以直接挂载环回设备：<placeholder-1/>"

msgid ""
"If the image partitions are managed with LVM, after you use <placeholder-1/> "
"and <placeholder-2/>, you must use <placeholder-3/> and <placeholder-4/> in "
"order to expose the LVM partitions as devices that can be mounted:"
"<placeholder-5/>"
msgstr ""
"如果镜像分区使用LVM管理，在你使用 <placeholder-1/> 和 <placeholder-2/> 命令"
"后，你需要使用 <placeholder-3/>  和 <placeholder-4/> 来列出LVM分区设备以便这"
"些分区能被挂载：<placeholder-5/>"

msgid ""
"If the image partitions are not managed with LVM, they can be mounted "
"directly:"
msgstr "如果镜像分区没有使用LVM，那么可以直接挂载他们："

msgid ""
"If the installer asks for web site name and CentOS directory separately, you "
"might enter:"
msgstr "如果安装程序要求分别指定网站地址和 CentOS 目录，你可以这样输入："

msgid ""
"If the network block device you selected was already in use, the initial "
"<placeholder-1/> command will fail silently, and the <filename>/dev/"
"nbd3p{1,2,3}</filename> device files will not be created."
msgstr ""
"如果你选择的网络块设备已经被占用，最开始的 <placeholder-1/> 命令将会失败，并"
"且 <filename>/dev/nbd3p{1,2,3}</filename> 设备文件也不会被建立。"

msgid "If the network is not active, start it by doing:"
msgstr "如果网络未激活，输入以下命令："

msgid ""
"If unsure, use the default partition scheme for the installer because no "
"scheme is better than another."
msgstr ""
"如果你不太确定，使用默认的分区方案就可以了，因为没有一定说某个方案就比其他方"
"案要优秀。"

msgid ""
"If unsure, we recommend you use the installer's default partition scheme, "
"since there is no clear advantage to one scheme or another."
msgstr ""
"如果你不太确定如何分区，我们推荐你使用安装程序默认的分区方案，因为目前也没有"
"任何方案完全优于其他分区方案。"

msgid ""
"If we didn't know in advance what the mount point is in the guest, we could "
"use the <literal>-i</literal>(inspect) flag to tell guestmount to "
"automatically determine what mount point to use:<placeholder-1/>Once "
"mounted, we could do things like list the installed packages using rpm:"
"<placeholder-2/> Once done, we unmount:<placeholder-3/>"
msgstr ""
"如果我们预先不知道镜像内的分区挂载点，可以使用<literal>-i</literal>（检阅）参"
"数告诉 guestmount 自动检测挂载点：<placeholder-1/>当挂载完成后，我们可以干一"
"些诸如使用rpm命令查看软件包安装列表等类似的事：<placeholder-2/> 当一切都完成"
"后，卸载它：<placeholder-3/>"

msgid ""
"If you are building the image on a headless server, and you have an X server "
"on your local machine, you can launch <placeholder-1/> using ssh X11 "
"forwarding to access the GUI. Since virt-manager interacts directly with "
"libvirt, you typically need to be root to access it. If you can ssh directly "
"in as root (or with a user that has permissions to interact with libvirt), "
"do:<placeholder-2/>"
msgstr ""
"如果你在无图形的服务器上创建虚拟机镜像，但在你本地机器有 X server启动，你可以"
"用  <placeholder-1/> ，通过使用ssh X11 转发访问图形界面。因为 virt-manager "
"和 libvirt 直接交互，你通常需要 root 权限来访问。如果你能直接以 root 用户（或"
"者有权限和livbirt交互的用户） ssh 访问服务器，使用以下命令：<placeholder-2/>"

msgid ""
"If you are not able to install the <systemitem class=\"service\">cloud-init</"
"systemitem> package in your image, to fetch the ssh public key and add it to "
"the root account, edit the <filename>/etc/rc.d/rc.local</filename> file and "
"add the following lines before the line <literal>touch /var/lock/subsys/"
"local</literal>:"
msgstr ""
"如果你不能在镜像中安装<systemitem class=\"service\">cloud-init</systemitem>软"
"件包，就获取ssh公钥并添加到root帐号中，编辑<filename>/etc/rc.d/rc.local</"
"filename>文件，在<literal>touch /var/lock/subsys/local</literal>之前添加以下"
"内容："

msgid ""
"If you are unable or unwilling to install <package>cloud-init</package> "
"inside the guest, you can write a custom script to fetch the public key and "
"add it to a user account."
msgstr ""
"如果你没有或者不希望安装  <package>cloud-init</package>包到虚拟机里，你可以自"
"己编写脚本来获取公钥并存放到用户账户内。"

msgid ""
"If you are using <placeholder-1/>, the commands should look something like "
"this:"
msgstr "如果你使用 <placeholder-1/> 命令，示例命令如下："

msgid ""
"If you can install the cloud-utils and <package>cloud-init</package> "
"packages, we recommend that when you create your images, you create a single "
"ext3 or ext4 partition (not managed by LVM)."
msgstr ""
"如果你能安装  cloud-utils 和  <package>cloud-init</package>包，我们推荐你创建"
"镜像时，只创建一个 ext3 和 ext4 分区（且不使用LVM管理）"

msgid ""
"If you cannot install <package>cloud-init</package> and <package>cloud-"
"tools</package> inside of your guest, and you want to support resize, you "
"must write a script that your image runs on boot to modify the partition "
"table. In this case, we recommend using LVM to manage your partitions. Due "
"to a limitation in the Linux kernel (as of this writing), you cannot modify "
"a partition table of a raw disk that has partitions currently mounted, but "
"you can do this for LVM."
msgstr ""
"如果你不能安装  <package>cloud-init</package> 和 <package>cloud-tools</"
"package> 软件包到镜像内但你还想镜像支持伸缩大小，你必须编写脚本让你的镜像在启"
"动的时候修改分区表。在这种情况下，我们推荐使用 LVM 来管理你的磁盘分区。由于 "
"Linux 内核限制（本文档编写时），当磁盘有分区被挂载的时候你不能修改磁盘分区"
"表，但是你可以使用 LVM 。"

msgid ""
"If you delete the network persistent rules files, you may get a udev kernel "
"warning at boot time, which is why we recommend replacing them with empty "
"files instead."
msgstr ""
"如果你删除网络持久规则文件，系统启动时你会看到内核警告信息，这是为什么我们推"
"荐使用空文件替代的原因。"

msgid ""
"If you do not use LVM, you must modify the table to extend the existing root "
"partition to encompass this additional space."
msgstr ""
"如果你没使用 LVM,你需要修改分区表扩充已经存在的根分区包纳磁盘额外的空间。"

msgid ""
"If you do not wish to use virt-manager (for example, you do not want to "
"install the dependencies on your server, you don't have an X server running "
"locally, the X11 forwarding over SSH isn't working), you can use the "
"<placeholder-1/> tool to boot the virtual machine through libvirt and "
"connect to the graphical console from a VNC client installed on your local "
"machine."
msgstr ""
"如果你不想使用  virt-manager （例如，你不想安装依赖包到你的服务器，你本地机器"
"没有 X server 或者 X11 转发工作不正常），你可以使用 <placeholder-1/> 工具通"
"过 Libvirt 启动虚拟机，然后使用本地 VNC 客户端连接到虚拟机的图形控制台。"

msgid ""
"If you don't have access to libguestfs, you can mount image file systems "
"directly in the host using loop devices, kpartx, and network block devices."
"<placeholder-1/>"
msgstr ""
"如果你不能使用libguestfs，你可以使用loop(环回)设备，kpartx,网络块设备直接挂载"
"镜像文件系统到宿主机系统。<placeholder-1/>"

msgid ""
"If you leave out the <literal>-u</literal> flag, or you want to edit the "
"file to do additional customizations, you can use the <placeholder-1/> "
"command, using the libvirt XML file that <placeholder-2/> creates. For "
"example:"
msgstr ""
"如果你忘记使用  <literal>-u</literal> 参数，或者你想编辑文件做额外的定制化，"
"你可以使用 <placeholder-1/> 命令，来使用 <placeholder-2/> 创建的libvirt XML "
"文件，例如："

msgid ""
"If you modify this example, the root partition, which is mounted on "
"<filename>/</filename>, must be the last partition on the drive so that it "
"can expand at run time to the disk size that your instance type provides. "
"Also note that <application>bsd-cloudinit</application> currently has a hard-"
"coded assumption that this is the second partition."
msgstr ""
"如果你的分区和示例不一样，挂载到 <filename>/</filename> 的根分区必须是磁盘上"
"的最后一个分区，以便在启动新虚拟机实例时能够扩展分区大小。同时注意 "
"<application>bsd-cloudinit</application> 目前将假设根分区是磁盘的第二个分区且"
"已硬编码到程序中。"

msgid ""
"If you use <placeholder-1/>, the commands should look something like this:"
msgstr "如果你使用  <placeholder-1/>，命令应该如下所示："

msgid ""
"If you use LVM, you can add a new LVM entry to the partition table, create a "
"new LVM physical volume, add it to the volume group, and extend the logical "
"partition with the root volume."
msgstr ""
"如果你使用了LVM，你可以添加新 LVM 条目到分区表，创建新 LVM 物理卷，然后添加 "
"LVM 物理卷到 卷组，然后扩充 root 卷的容量。"

msgid ""
"If you use the OpenStack XenAPI driver, the Compute service automatically "
"adjusts the partition and file system for your instance on boot. Automatic "
"resize occurs if the following conditions are all true:"
msgstr ""
"如果你使用 OpenStack  XenAPI 驱动，那么计算服务在虚拟机启动时会自动调整分区和"
"文件系统大小。在满足以下条件的时候会自动调整容量需："

msgid ""
"If you want to modify this image to load the 8021q kernel at boot time, you "
"must create an executable script in the <filename>/etc/sysconfig/modules/</"
"filename> directory. You can use the <placeholder-1/> guestfish command to "
"create an empty file, the <placeholder-2/> command to edit it, and the "
"<placeholder-3/> command to make it executable.<placeholder-4/> We add the "
"following line to the file and save it:<placeholder-5/>Then we set to "
"executable: <placeholder-6/>"
msgstr ""
"如果你想修改镜像让他在启动时加载8021q内核模块，你必须在<filename>/etc/"
"sysconfig/modules/</filename>目录下简历一个可执行脚本。你可以使用"
"<placeholder-1/>guestfish命令创建一个空文件，然后使用<placeholder-2/> 命令编"
"辑它，然后使用 <placeholder-3/> 命令让它具有可执行权限。<placeholder-4/> 我们"
"添加以下一行到文件内，然后保存：<placeholder-5/>然后设置文件可执行权限："
"<placeholder-6/>"

msgid ""
"If you wish to build your own images of Debian 7.0 (aka Wheezy, the current "
"stable release of Debian), you can use the package which is used to build "
"the official Debian images. It is named <package>openstack-debian-images</"
"package>, and it provides a simple script for building them. This package is "
"available in Debian Unstable, Debian Jessie, and through the wheezy-"
"backports repositories. To produce a Wheezy image, simply run: "
"<placeholder-1/>"
msgstr ""
"如果你想创建 Debian 7.0 镜像（也就是 Wheezy，Debian 当前稳定版本）。你可以使"
"用用于创建官方的 Debian 镜像的  <package>openstack-debian-images</package> 软"
"件包，它提供既简单的脚本来创建。这个包在 Debian 未稳定分支 Debian Jessie 内，"
"通过使用 wheezy-backports 源。要生成 Wheezy 镜像，仅需运行：<placeholder-1/>"

msgid ""
"If your image uses grub2 as the boot loader, there should be a line in the "
"grub configuration file. For example, <filename>/boot/grub/grub.cfg</"
"filename>, which looks something like this:"
msgstr ""
"如果你的镜像使用 grub2 做为引导程序，在配置文件内应该有一行配置内容。例如， "
"<filename>/boot/grub/grub.cfg</filename>，看起来应该如下："

msgid "Image cache management configuration options"
msgstr "镜像缓存管理配置选项"

msgid "Image format"
msgstr "镜像格式"

msgid "Image is complete"
msgstr "镜像准备完成"

msgid "Image metadata"
msgstr "镜像元数据"

msgid ""
"In FreeBSD 10.0 the <placeholder-1/> command verifies SSL peers by default, "
"so you need to install the <package>ca_root_nss</package> package that "
"contains certificate authority root certificates and tell <placeholder-2/> "
"where to find them. For FreeBSD 10.0 run these commands:"
msgstr ""
"FreeBSD 10.0中 <placeholder-1/> 命令默认价差SSL对端，因此你需要安装 "
"<package>ca_root_nss</package> 包，该包包含了根证书并且告诉 <placeholder-2/> "
"使用，对 FreeBSD 10.0 运行以下命令："

msgid ""
"In a CirrOS image, the login account is <literal>cirros</literal>. The "
"password is <literal>cubswin:)</literal>"
msgstr ""
"CirrOS 镜像的登陆账号是 <literal>cirros</literal>，密码是 "
"<literal>cubswin:)</literal>"

msgid "In a Fedora image, the login account is <literal>fedora</literal>."
msgstr "在Fedora 镜像中，登陆账户是 <literal>fedora</literal>。"

msgid "In a RHEL image, the login account is <literal>cloud-user</literal>."
msgstr "在红帽企业Linux镜像中，登陆账户是 <literal>cloud-user</literal>。"

msgid ""
"In an Ubuntu cloud image, the login account is <literal>ubuntu</literal>."
msgstr "Ubuntu 云镜像的登陆账号是 <literal>ubuntu</literal>。"

msgid ""
"In general, we recommend that you disable any firewalls inside of your image "
"and use OpenStack security groups to restrict access to instances. The "
"reason is that having a firewall installed on your instance can make it more "
"difficult to troubleshoot networking issues if you cannot connect to your "
"instance."
msgstr ""
"通常，我们推荐你关闭掉镜像内所有的防火墙，使用 OpenStack 安全组来限制访问你的"
"虚拟机。因为在镜像内开启防火墙会增加在不能访问虚拟机的时候诊断问题时的难度。"

msgid ""
"In the <filename>/var/log/compute/compute.log</filename> file, look for the "
"identifier:"
msgstr ""
"在  <filename>/var/log/compute/compute.log</filename> 文件，查看以下部分日"
"志。"

msgid ""
"In the <guilabel>configuration options</guilabel> window, change the "
"following settings:"
msgstr "在<guilabel>configuration options</guilabel>窗口，修改以下设置："

msgid ""
"In the example above, the guest <literal>centos-6.4</literal> uses VNC "
"display <literal>:1</literal>, which corresponds to TCP port <literal>5901</"
"literal>. You should be able to connect a VNC client running on your local "
"machine to display :1 on the remote machine and step through the "
"installation process."
msgstr ""
"在上面的示例中，虚拟机 <literal>centos-6.4</literal> 使用 VNC 显示器 "
"<literal>:1</literal>，对应的 TCP 端口是  <literal>5901</literal>。你应该使用"
"本地 VNC 客户端连接到远程服务器的 ：1 显示器并且完成安装步骤。"

msgid ""
"In the previous example, you paused the instance, ejected the disk, and "
"unpaused the instance. In theory, you could have ejected the disk at the "
"<guilabel>Installation complete</guilabel> screen. However, our testing "
"indicates that the Ubuntu installer locks the drive so that it cannot be "
"ejected at that point."
msgstr ""
"在前面的示例中，你暂停虚拟机，弹出磁盘，然后恢复虚拟机，理论上，你在 "
"<guilabel>Installation complete</guilabel>  屏幕显示的时候就能弹出磁盘，然后"
"我们测试显示 Ubuntu 安装程序锁定了磁盘，因此，不能弹出磁盘。"

msgid ""
"In this case, it's the <filename>/dev/sda2</filename> partition that we want "
"to resize. We create a new qcow2 image and use the <placeholder-1/> command "
"to write a resized copy of the original into the new image: <placeholder-2/>"
msgstr ""
"在这个示例中，<filename>/dev/sda2</filename>是我们需要修改大小的分区，我们创"
"建一个新的 qcow2 镜像并且使用 <placeholder-1/> 命令写入一个修改大小后的原始镜"
"像文件到新镜像文件内：<placeholder-2/>"

msgid ""
"In this example, <filename>/dev/loop0</filename> is free. Associate a loop "
"device with the raw image:<placeholder-1/>"
msgstr ""
"在这个示例中，<filename>/dev/loop0</filename>是空闲的，关联裸镜像到环回设备："
"<placeholder-1/>"

msgid "Initial release of this guide."
msgstr "本指南初始版本。"

msgid ""
"Install <literal>cloud-init</literal> package inside the Fedora guest by "
"adding the EPEL repo:"
msgstr ""
"在 Fedora 虚拟机添加 EPEL 源以便安装 <literal>cloud-init</literal> 软件包。"

msgid ""
"Install <package>sudo</package> and configure the <literal>freebsd</literal> "
"user to have passwordless access:"
msgstr ""
"安装 <package>sudo</package> 并且配置 <literal>freebsd</literal> 用户无密码访"
"问："

msgid "Install GRUB boot loader"
msgstr "安装 GRUB 引导程序"

msgid ""
"Install and run the <literal>acpid</literal> service on the guest system to "
"enable the virtual machine to reboot or shutdown an instance."
msgstr ""
"在虚拟机上安装并且启用 <literal>acpid</literal> 服务，以便能够重启或者关闭虚"
"拟机。"

msgid "Install cloud-init"
msgstr "安装 cloud-init"

msgid "Install the <package>cloud-init</package> package:"
msgstr "安装  <package>cloud-init</package>  软件包："

msgid "Install the ACPI service"
msgstr "安装 ACPI 服务"

msgid "Introduction"
msgstr "介绍"

msgid ""
"KVM with virtio drivers is used as the virtualization platform because that "
"is the most widely used among OpenStack operators. If you use a different "
"platform for your cloud virtualization, use that same platform in the image "
"creation step."
msgstr ""
"这个示例中使用 KVM 以及 virtio 驱动做为虚拟化平台，因为这是 Openstack 使用最"
"广泛的平台之一，如果你使用其他平台做为你的云计算虚拟化，在创建中镜像也使用相"
"同的平台。"

msgid ""
"Launch a VM on your local workstation. Use the same hypervisor, virtual "
"disk, and virtual network drivers as you use in your production environment."
msgstr "启动一个虚拟机，使用和你生产环境一样的虚拟化层，虚拟磁盘以及网卡驱动。"

msgid "Log in as administrator and start a command window."
msgstr "以administrator用户登录并开启命令行窗口。"

msgid ""
"Log in as root user when you boot for the first time after installation."
msgstr "安装完成重启后以root用户登录。"

msgid "Log in to newly created image"
msgstr "登陆到新创建的镜像内"

msgid "Loop devices, kpartx, network block devices"
msgstr "loop(环回)设备，kpartx,网络块设备"

msgid "Make a virtual drive:"
msgstr "创建一个虚拟磁盘："

msgid "Manage the image cache"
msgstr "管理镜像缓存"

msgid ""
"Metadata can also determine the scheduling of hosts. If the <placeholder-1/> "
"option is set on an image, and Compute is configured so that the "
"<systemitem>ImagePropertiesFilter</systemitem> scheduler filter is enabled "
"(default), then the scheduler only considers compute hosts that satisfy that "
"property."
msgstr ""
"元数据还能探测知主机的调度。 如果设置了镜像的 <placeholder-1/> 选项，而且计算"
"节点也配置了启用（默认的） <systemitem>ImagePropertiesFilter</systemitem> 调"
"度过滤器。那么调度器在调度时只需要考虑哪些符合属性需求的计算节点。"

msgid "Microsoft Hyper-V uses the VHD (Virtual Hard Disk) format for images."
msgstr "微软 Hyper-V 使用 VHD 镜像格式。"

msgid "Microsoft Windows images"
msgstr "微软 Windows 镜像"

msgid "Minimize boot delay:"
msgstr "最小启动延时："

msgid ""
"Minor revisions for Icehouse - moved property listing into "
"<citetitle>Command-Line Interface Reference</citetitle> and added a note "
"about Windows time zones."
msgstr ""
"Icehouse 发行，次要更新 -  移动特性列表到 <citetitle>Command-Line Interface "
"Reference</citetitle> 并添加 Windows 时区相关。"

msgid "Minor revisions for Juno."
msgstr "Juno发行，次要更新"

msgid ""
"Modify <filename>/etc/rc.local</filename> to fetch desired information from "
"the metadata service, as described in the next section."
msgstr ""
"修改  <filename>/etc/rc.local</filename> 文件从元数据服务获取信息，具体将在下"
"一届描述。"

msgid "Modify a single file inside of an image"
msgstr "修改镜像内单个文件"

msgid "Modify images"
msgstr "更改镜像内容"

msgid "Modify the partition table to make it aware of the additional space:"
msgstr "修改分区表识别磁盘额外的空间。"

msgid "Mount a qcow2 image (with LVM)"
msgstr "挂载 qcow2 镜像（有LVM）"

msgid "Mount a qcow2 image (without LVM)"
msgstr "挂载 qcow2 镜像（无LVM）"

msgid "Mount a raw image (with LVM)"
msgstr "挂载裸镜像（有LVM）"

msgid "Mount a raw image (without LVM)"
msgstr "挂载裸镜像（无LVM）"

msgid ""
"Network adapter to configure: <literal>Red Hat VirtIO Ethernet Adapter</"
"literal>"
msgstr "网卡：<literal>Red Hat VirtIO Ethernet Adapter</literal>"

msgid ""
"Next, update the grub configuration. On Debian-based operating-systems such "
"as Ubuntu, run this command:"
msgstr "然后，更新 grub 配置，在 Debian 系列的系统如 Ubuntu，运行以下命令："

msgid ""
"Next, we want to delete a file. We can use the <placeholder-1/> guestfish "
"command, which works the same way it does in a traditional shell."
msgstr ""
"下一步，我们想删除一个文件，使用guestfish 命令 <placeholder-1/> ，就像使用普"
"通shell命令一样。"

msgid ""
"Next, you need to use the <placeholder-1/> command to identify the LVM "
"volume groups and then <placeholder-2/> to expose the volumes as devices:"
msgstr ""
"下一步，你需要用 <placeholder-1/> 命令识别 LVM 卷组然后使用 <placeholder-2/> "
"激活卷："

msgid "No hard-coded MAC address information"
msgstr "无硬编码的 MAC 地址信息"

msgid ""
"Non-Xen with cloud-init/cloud-tools: One ext3/ext4 partition (no LVM, no /"
"boot, no swap)"
msgstr ""
"非 Xen 平台安装 cloud-init/cloud-tools ：单 ext3/ext4 分区（无 LVM ,无 /"
"boot , 无 SWAP）"

msgid ""
"Non-Xen without <package>cloud-init</package>/<package>cloud-tools</"
"package>: LVM"
msgstr ""
"非 Xen 环境且无 <package>cloud-init</package>/<package>cloud-tools</package>"
"软件包：使用 LVM"

msgid "OVF"
msgstr "OVF"

msgid "Official Debian images"
msgstr "官方 Debian 镜像"

msgid "Official Fedora images"
msgstr "官方Fedora 镜像"

msgid "Official Red Hat Enterprise Linux images"
msgstr "红帽企业lLinux官方镜像"

msgid "Official Ubuntu images"
msgstr "Ubuntu 官方镜像"

msgid "Official images from other Linux distributions"
msgstr "其他Linux发行版的官方镜像"

msgid "Official openSUSE and SLES images"
msgstr "官方 openSUSE 和 SLES 镜像"

msgid ""
"On Fedora-based systems, such as RHEL and CentOS, and on openSUSE, run this "
"command:"
msgstr "在 Fedora 系列的系统，如 RHEL 和 CentOS，以及 openSUSE，运行以下命令："

msgid ""
"Once the installation is completed, the VM restarts. Define a password for "
"the administrator when prompted."
msgstr "安装完成，虚拟机重启后，为虚拟机administrator用户设置密码。"

msgid "OpenStack"
msgstr "OpenStack"

msgid ""
"OpenStack Compute does not currently have support for OVF packages, so you "
"will need to extract the image file(s) from an OVF package if you wish to "
"use it with OpenStack."
msgstr ""
"OpenStack 计算节点目前并不支持 OVF 包，如果你想要在Openstack中使用，你需要从"
"OVF中释放磁盘镜像文件。"

msgid "OpenStack Foundation"
msgstr "OpenStack基金会"

msgid "OpenStack Linux image requirements"
msgstr "OpenStack Linux 镜像需求"

msgid "OpenStack Virtual Machine Image Guide"
msgstr "OpenStack 虚拟机镜像制作指南"

msgid "Optionally, add users."
msgstr "可选的，添加用户。"

msgid "Oz"
msgstr "Oz"

msgid ""
"Oz will invoke libvirt to boot the image inside of KVM, then Oz will ssh "
"into the instance and perform the customizations."
msgstr ""
"Oz 将调用 libvirt 通过 KVM 来启动镜像，然后Oz ssh 到虚拟机内完成定制化工作。"

msgid "Packer"
msgstr "Packer"

msgid ""
"Paravirtualized Xen support in Linux kernel (Xen hypervisor only with Linux "
"kernel version &lt; 3.0)"
msgstr ""
"Linux 内核对半虚拟化 Xen的支持  (Xen hypervisor only with Linux kernel "
"version &lt; 3.0)"

msgid "Paravirtualized Xen support in the kernel (Xen hypervisor only)"
msgstr "内核内对半虚拟化的 Xen 支持（仅Xen 虚拟化）"

msgid "Partition the disks"
msgstr "磁盘分区"

msgid "Point the installer to a CentOS web server"
msgstr "将安装程序指向 CentOS 网站。"

msgid "Power off the system:"
msgstr "关闭系统："

msgid ""
"Prior to Linux kernel version 3.0, the mainline branch of the Linux kernel "
"did not have support for paravirtualized Xen virtual machine instances (what "
"Xen calls DomU guests). If you are running the Xen hypervisor with "
"paravirtualization, and you want to create an image for an older Linux "
"distribution that has a pre 3.0 kernel, you must ensure that the image boots "
"a kernel that has been compiled with Xen support."
msgstr ""
"在 Linux 内核 3.0以前，内核的主线分支不支持 Xen 半虚拟化虚拟机（即 Xen DomU "
"虚拟机）。如果你运行 Xen 半虚拟化，并且你想创建内核在3.0版本之前的虚拟机镜"
"像，你不许确保镜像启动内核已经编译了 Xen 支持。"

msgid "Process user data and other metadata (<package>cloud-init</package>)"
msgstr "处理用户以及其他的元数据 (<package>cloud-init</package>)"

msgid "Process user data and other metadata (cloud-init)"
msgstr "处理用户数据以及其他元数据（cloud-init）"

msgid ""
"Provide a host name for your image. If you use <application>bsd-cloudinit</"
"application>, it overrides this value with the name provided by OpenStack "
"when an instance boots from this image."
msgstr ""
"提供主机名。如果你使用 <application>bsd-cloudinit</application>，它将在虚拟机"
"启动时使用OpenStack分配给他的主机名覆盖这个值。"

msgid "QED (KVM)"
msgstr "QED (KVM)"

msgid "Rackspace Cloud Builders (multiple distros) images"
msgstr "Rackspace 云计算镜像（多个发行版）"

msgid "Raw"
msgstr "Raw"

msgid "Red Hat Enterprise Linux 6 KVM Guest Image"
msgstr "Red Hat Enterprise Linux 6 KVM Guest Image"

msgid "Red Hat Enterprise Linux 7 KVM Guest Image"
msgstr "Red Hat Enterprise Linux 7 KVM Guest Image"

msgid "Remaining licensing details are filled in by the template."
msgstr "其余的授权细节来自于模版"

msgid "Resize an image"
msgstr "改变镜像大小"

msgid "Resize the root file system. For example, <placeholder-1/>."
msgstr "重新改变根文件系统大小。例如，<placeholder-1/>。"

msgid "Resize the root volume file system."
msgstr "重改变 root 卷文件系统。"

msgid ""
"Run the <placeholder-1/> command to see a range of allowed <literal>--os-"
"variant</literal> options."
msgstr ""
"运行  <placeholder-1/>命令查看 <literal>--os-variant</literal> 允许的选项范"
"围。"

msgid ""
"Run the following commands from the host to eject the disk and reboot using "
"virsh, as root."
msgstr "以root用户使用virsh命令弹出安装盘并且重启虚拟机。"

msgid ""
"Run the following commands from the host to eject the disk and reboot using "
"virsh, as root. If you are using virt-manager, the commands below will work, "
"but you can also use the GUI to detach and reboot it by manually stopping "
"and starting."
msgstr ""
"以root用户使用virsh命令，执行下面的步骤完成挂载空磁盘并重启。如果你使用virt-"
"manager安装,下面的命令也起相同作用，你也可以使用图形界面卸载磁盘并手工停止然"
"后启动虚拟机。"

msgid ""
"Run the following commands in the host as root to start up the machine again "
"as paused, eject the disk and resume. If you are using virt-manager, you may "
"use the GUI instead."
msgstr ""
"在宿主机上以 root  用户运行以下命令暂停虚拟机，弹出磁盘然后恢复虚拟机。如果你"
"使用 virt-manager ，你需要在图形界面完成这个过程。"

msgid ""
"Run the following commands inside the CentOS guest to install the ACPI "
"service and configure it to start when the system boots:"
msgstr ""
"在 CentOS虚拟机内运行以下命令安装 ACPI 服务并配置为系统启动时自动启动。"

msgid ""
"Run the following commands inside the Fedora guest to install the ACPI "
"service and configure it to start when the system boots:"
msgstr "在 Fedora 虚拟机内运行一下命令安装并启用 ACPI服务。"

msgid "Run the installer:"
msgstr "运行安装程序："

msgid "SSH server running"
msgstr "启用SSH服务"

msgid "SUSE Studio"
msgstr "SUSE Studio"

msgid ""
"Second partition: A <literal>freebsd-ufs</literal> partition with a mount "
"point of <filename>/</filename> with all remaining free space."
msgstr ""
"第二个分区： <literal>freebsd-ufs</literal> 分区挂载点是 <filename>/</"
"filename> 并使用所有剩下的空余空间。"

msgid ""
"Select \"Yes\" when asked about installing the GRUB boot loader to the "
"master boot record."
msgstr "当提示安装 GRUB 引导程序到硬盘主启动记录时，选择 \"Yes\"。"

msgid ""
"Select <guibutton>Create</guibutton> to create a partition table. This "
"action is the default when no partition table exists. Then, select "
"<guilabel>GPT GUID Partition Table</guilabel> from the list. This choice is "
"the default."
msgstr ""
"选择 <guibutton>Create</guibutton>创建分区表，当没有分区表存在时这是默认动"
"作，然后，从列表中选择 <guilabel>GPT GUID Partition Table</guilabel> ，这也是"
"默认选择。"

msgid ""
"Select <guibutton>Finish</guibutton> and then <guibutton>Commit</guibutton> "
"to commit your changes."
msgstr ""
"选择 <guibutton>Finish</guibutton>  然后选择 <guibutton>Commit</guibutton> 提"
"交修改。"

msgid "Select a mirror"
msgstr "选择镜像站点"

msgid "Select a root password."
msgstr "设置root用户密码。"

msgid "Select the CMOS time zone."
msgstr "选择 CMOS 时区。"

msgid ""
"Select the defaults for all of the remaining options. When the installation "
"is complete, you will be prompted to remove the CD-ROM."
msgstr ""
"剩下的步骤中，选择默认的值即可。当安装完成时，你会看到提示移除 CD-ROM。"

msgid "Select the time zone appropriate to your environment."
msgstr "选择你当前环境的时区。"

msgid "Serial port for logging: <literal>COM1</literal>"
msgstr "日志输出串口：<literal>COM1</literal>"

msgid "Set the disk format for your image to one of the following values:"
msgstr "设置你的镜像磁盘格式为下面的值："

msgid ""
"Set the timezone, network configuration, installation source, and the root "
"password. Optionally, you can choose to create a user."
msgstr ""
"设置时区，网络配置，安装源，root用户密码，以及作为可选项，你还可以创建额外的"
"用户。"

msgid "Set up disk partitioning."
msgstr "设置磁盘分区。"

msgid "Set up the console:"
msgstr "设置console:"

msgid "Set up the installation destination as shown below:"
msgstr "设置安装位置："

msgid "Shut down the instance"
msgstr "关闭虚拟机"

msgid "Shut down the instance from inside the instance as a root user:"
msgstr "在虚拟机内以root用户关闭虚拟机。"

msgid "Software selection: OpenSSH server"
msgstr "软件选择：OpenSSH 服务"

msgid ""
"Some VNC clients replace : (colon) with ; (semicolon) and _ (underscore) "
"with - (hyphen). If editing a file over a VNC session, make sure it's http: "
"not http; and authorized_keys not authorized-keys."
msgstr ""
"有些 VNC 客户会使用分号 (<literal>;</literal>)替换冒号(<literal>:</literal>) "
"以及用中划线 (<literal>-</literal>)替换下划线(<literal>_</literal>) ，确认你"
"输入的是 <literal>http:</literal> 而不是 <literal>http;</literal> ， "
"<literal>authorized_keys</literal> 而不是 <literal>authorized-keys</"
"literal>。"

msgid ""
"Some VNC clients replace the colon (<literal>:</literal>) with a semicolon "
"(<literal>;</literal>) and the underscore (<literal>_</literal>) with a "
"hyphen (<literal>-</literal>). Make sure to specify <literal>http:</literal> "
"and not <literal>http;</literal>. Make sure to specify "
"<literal>authorized_keys</literal> and not <literal>authorized-keys</"
"literal>."
msgstr ""
"有些 VNC 客户会使用分号 (<literal>;</literal>)替换冒号(<literal>:</literal>) "
"以及用中划线 (<literal>-</literal>)替换下划线(<literal>_</literal>) ，确认你"
"输入的是 <literal>http:</literal> 而不是 <literal>http;</literal> ， "
"<literal>authorized_keys</literal> 而不是 <literal>authorized-keys</"
"literal>。"

msgid ""
"Sometimes, you must modify a virtual machine image to remove any traces of "
"the MAC address that was assigned to the virtual network interface card when "
"the image was first created, because the MAC address will be different when "
"it boots the next time. This example shows how to use guestfish to remove "
"references to the old MAC address by deleting the <filename>/etc/udev/rules."
"d/70-persistent-net.rules</filename> file and removing the <literal>HWADDR</"
"literal> line from the <filename>/etc/sysconfig/network-scripts/ifcfg-eth0</"
"filename> file."
msgstr ""
"有时，你必须删除虚拟机镜像内任何包含虚拟机安装时分配给虚拟机网卡的MAC的文件，"
"因为用镜像文件创建新虚拟机时网卡MAC地址和创建镜像的虚拟机并不一样。这个示例通"
"过删除 <filename>/etc/udev/rules.d/70-persistent-net.rules</filename>文件以及"
"删除<filename>/etc/sysconfig/network-scripts/ifcfg-eth0</filename>文件中"
"<literal>HWADDR</literal>一行来演示了如何使用guestfish删除镜像中和原MAC地址相"
"关联的地方。"

msgid ""
"Start the Windows Server 2012 installation with the <placeholder-1/> command:"
msgstr "使用<placeholder-1/>命令开始 Windows Server 2012 的安装："

msgid "Start the install process"
msgstr "开始安装"

msgid "Start the installation process"
msgstr "启动安装程序"

msgid ""
"Start the installation process by using either <placeholder-1/> or "
"<placeholder-2/> as described in the previous section. If you use "
"<placeholder-3/>, do not forget to connect your VNC client to the virtual "
"machine."
msgstr ""
"使用在之前示例中讲解的 <placeholder-1/>  或者 <placeholder-2/> 命令。如果你使"
"用<placeholder-3/> ，记得使用 VNC 客户端连接到虚拟机。"

msgid ""
"Start the installation process using either <placeholder-1/> or "
"<placeholder-2/> as described in the previous section. If you use "
"<placeholder-3/>, do not forget to connect your VNC client to the virtual "
"machine."
msgstr ""
"通过使用前面的章节介绍的 <placeholder-1/> 或者 <placeholder-2/> 命令都可以启"
"动安装程序，如果你使用 <placeholder-3/> 记得连接你的VNC客户端到虚拟机。"

msgid "Start the installation using <placeholder-1/> as shown below:"
msgstr "使用 <placeholder-1/> 开始安装 ，如下："

msgid "Step through the install"
msgstr "安装步骤"

msgid ""
"Step through the install, using the default options. When prompted for a "
"user name, the default (<systemitem class=\"username\">ubuntu</systemitem>) "
"is fine."
msgstr ""
"安装过程中，使用默认的选项即可，当提示输入用户名时，使用默认的 (<systemitem "
"class=\"username\">ubuntu</systemitem>)  即可。"

msgid "Step through the installation"
msgstr "安装步骤"

msgid ""
"Step through the installation, using the default options. The simplest thing "
"to do is to choose the \"Basic Server\" install (may be called \"Server\" "
"install on older versions of CentOS), which installs an SSH server."
msgstr ""
"使用默认设置，完成安装程序设置步骤，最后最简单的事选择 \"Basic Server\" 软件"
"包组（以前版本的 CentOS 可能叫做  \"Server\" ），它将默认安装 SSH 服务。"

msgid "Storage devices"
msgstr "存储设备"

msgid ""
"The \"raw\" image format is the simplest one, and is natively supported by "
"both KVM and Xen hypervisors. You can think of a raw image as being the bit-"
"equivalent of a block device file, created as if somebody had copied, say, "
"<filename>/dev/sda</filename> to a file using the <placeholder-1/> command. "
"<placeholder-2/>"
msgstr ""
"\"raw\" 镜像格式是最最简单的，并且是被 KVM 和 Xen 原生支持的格式，你可以想象"
"裸格式镜像和块设备文件是二进制位相当的，就好像从块设备拷贝过来的，比方说，使"
"用<placeholder-1/> 命令将 <filename>/dev/sda</filename> 内容拷贝到一个文件。"

msgid ""
"The <link xlink:href=\"https://help.ubuntu.com/12.04/serverguide/jeos-and-"
"vmbuilder.html\"><citetitle>Ubuntu Server Guide</citetitle></link> has "
"documentation on how to use VMBuilder to create an Ubuntu image."
msgstr ""
"<link xlink:href=\"https://help.ubuntu.com/12.04/serverguide/jeos-and-"
"vmbuilder.html\"><citetitle>Ubuntu Server Guide</citetitle></link> 编写了如何"
"使用 VMBuilder 创建 Ubuntu 镜像。"

msgid ""
"The <literal>-X</literal> flag passed to ssh will enable X11 forwarding over "
"ssh. If this does not work, try replacing it with the <literal>-Y</literal> "
"flag."
msgstr ""
" <literal>-X</literal>  参数传递给 ssh 将启用 ssh  X11转发。如果不能工作，尝"
"试用 -Y 参数。"

msgid ""
"The <literal>-d3</literal> flag tells Oz to show status information as it "
"runs."
msgstr " <literal>-d3</literal> 参数指定  Oz 运行时显示状态信息。"

msgid ""
"The <literal>-u</literal> tells Oz to do the customization (install extra "
"packages, run the commands) once it does the initial install."
msgstr ""
" <literal>-u</literal>  参数指定 Oz 完成安装后运行自定义的安装动作（安装扩展"
"包，运行其他命令等）"

msgid ""
"The <literal>-x &lt;filename&gt;</literal> flag tells Oz what filename to "
"use to write out a libvirt XML file (otherwise it will default to something "
"like <filename>centos64Apr_03_2013-12:39:42</filename>)."
msgstr ""
" <literal>-x &lt;filename&gt;</literal> 参数指定 Oz 输出给libvirt使用的 XML "
"文件名（否则它默认文件名是诸如 <filename>centos64Apr_03_2013-12:39:42</"
"filename>这种名称）。"

msgid ""
"The <literal>cloud-init</literal> package automatically fetches the public "
"key from the metadata server and places the key in an account."
msgstr ""
"<literal>cloud-init</literal> 自动从元数据服务器获取公钥并保存到账户内。"

msgid ""
"The <package>cloud-init</package> package automatically fetches the public "
"key from the metadata server and places the key in an account. The account "
"varies by distribution. On Ubuntu-based virtual machines, the account is "
"called <literal>ubuntu</literal>. On Fedora-based virtual machines, the "
"account is called <literal>ec2-user</literal>."
msgstr ""
"<package>cloud-init</package> 软件从元数据服务自动获取公钥并存放在账户内。不"
"同发行版的账户不一样。基于 Ubuntu 系的虚拟机，账户是  <literal>ubuntu</"
"literal> 。Fedora 系的虚拟机，账户是 <literal>ec2-user</literal>。"

msgid ""
"The <placeholder-1/> script starts on instance boot and will search for a "
"metadata provider to fetch a public key from. The public key will be placed "
"in the default user account for the image."
msgstr ""
"<placeholder-1/> 脚本将在虚拟机启动的时候搜寻元数据服务获取公钥。公钥将会放在"
"镜像默认用户内。"

msgid ""
"The <systemitem class=\"service\">cloud-init</systemitem> package "
"automatically fetches the public key from the metadata server and places the "
"key in an account. You can install <systemitem class=\"service\">cloud-init</"
"systemitem> inside the CentOS guest by adding the EPEL repo:"
msgstr ""
" <systemitem class=\"service\">cloud-init</systemitem> 包自动从元数据服务获取"
"公钥并保存到账户，你可以在 CentOS虚拟机添加 EPEL 安装源来安装 <systemitem "
"class=\"service\">cloud-init</systemitem> 包。"

msgid ""
"The KVM hypervisor starts the virtual machine with the libvirt name, "
"<literal>centos-6.4</literal>, with 1024MB of RAM. The virtual machine also "
"has a virtual CD-ROM drive associated with the /data/CentOS-6.4-x86_64-"
"netinstall.iso file and a local 10GB hard disk in qcow2 format that is "
"stored in the host at /data/centos-6.4.qcow2. It configures networking to "
"use libvirt's default network. There is a VNC server that is listening on "
"all interfaces, and libvirt will not attempt to launch a VNC client "
"automatically nor try to display the text console (--no-autoconsole). "
"Finally, libvirt will attempt to optimize the configuration for a Linux "
"guest running a RHEL 6.x distribution."
msgstr ""
"KVM 虚拟化使用 <literal>centos-6.4</literal> 名称，1024MB内存启动虚拟机。虚拟"
"机还有一个关联文件/data/CentOS-6.4-x86_64-netinstall.iso 的虚拟的 CD-ROM，并"
"拥有 10GB 的qcow2格式的硬盘，硬盘文件位置在 /data/centos-6.4.qcow2。虚拟机配"
"置了网络使用 libvirt 的默认网络。且 VNC 服务监听所有的网卡，并且 libvirt 不会"
"自动启动 VNC 客户端也不会显示字符界面控制台（--no-autoconsole）。最后，"
"libvirt 将尝试以RHEL 6.x 发行版来优化虚拟机配置。"

msgid ""
"The Ubuntu installer will ask how you want to manage upgrades on your "
"system. This option depends on your specific use case. If your virtual "
"machine instances will be connected to the Internet, we recommend \"Install "
"security updates automatically\"."
msgstr ""
"Ubuntu 安装程序询问你如何设置系统更新。这个选项依赖于你的使用环境，如果将来创"
"建的虚拟机能链接到因特网，我们推荐  \"Install security updates automatically"
"\"。"

msgid ""
"The account varies by distribution. On Ubuntu-based virtual machines, the "
"account is called \"ubuntu\". On Fedora-based virtual machines, the account "
"is called \"ec2-user\"."
msgstr ""
"不同的发行版保存的账户不同，在基于 Ubuntu 的虚拟机，账户是 <literal>ubuntu</"
"literal> ，基于 Fedora 的虚拟机，账户是 <literal>ec2-user</literal> 。"

msgid ""
"The account varies by distribution. On Ubuntu-based virtual machines, the "
"account is called <literal>ubuntu</literal>. On Fedora-based virtual "
"machines, the account is called <literal>ec2-user</literal>."
msgstr ""
"不同的发行版保存的账户不同，在基于 Ubuntu 的虚拟机，账户是 <literal>ubuntu</"
"literal> ，基于 Fedora 的虚拟机，账户是 <literal>ec2-user</literal> 。"

msgid ""
"The container format indicates whether the virtual machine image is in a "
"file format that also contains metadata about the actual virtual machine."
msgstr "镜像容器格式表示包含虚拟机镜像的文件是否也包含虚拟机的metadata数据。"

msgid ""
"The default TCP/IP settings are fine. In particular, ensure that Enable IPv4 "
"support is enabled with DHCP, which is the default."
msgstr ""
"默认的  TCP/IP 就OK了，尤其是，确认 IPv4 支持项启用了 DHCP，默认是启用的。"

msgid "The default mirror proposed by the installer should be fine."
msgstr "选择默认的镜像站点即可。"

msgid ""
"The disk format of a virtual machine image is the format of the underlying "
"disk image. Virtual appliance vendors have different formats for laying out "
"the information contained in a virtual machine disk image."
msgstr ""
"虚拟机的磁盘格式指的是底层的磁盘镜像格式，虚拟设备厂商有不同的格式来放置虚拟"
"机磁盘镜像包含的信息。"

msgid ""
"The disk is not detected by default by the Windows installer. When requested "
"to choose an installation target, click <guibutton>Load driver</guibutton> "
"and browse the file system to select the <filename>E:\\WIN8\\AMD64</"
"filename> folder. The Windows installer displays a list of drivers to "
"install. Select the VirtIO SCSI and network drivers, and continue the "
"installation."
msgstr ""
"Windows 安装程序默认不识别硬盘，当安装程序要求你选择安装位置时，点击"
"<guibutton>加载驱动</guibutton>并浏览文件系统选择 <filename>E:\\WIN8\\AMD64</"
"filename> 文件夹。Windows 安装程序显示驱动列表，选择VirtIO SCSI和网络驱动，继"
"续安装。"

msgid "The disk on the image has only one partition."
msgstr "镜像的磁盘只有一个分区。"

msgid ""
"The easiest way to support this type of functionality is to install the "
"<package>cloud-init</package> package into your image, which is configured "
"by default to treat user data as an executable script, and sets the host "
"name."
msgstr ""
"支持这个功能的最简单的办法是安装 <package>cloud-init</package> 软件包到你的镜"
"像，它默认配置为将用户数据视为可执行脚本并且设置主机名。"

msgid "The file system on the one partition is ext3 or ext4."
msgstr "仅有的分区文件系统是 ext3 或者　ext4 ."

msgid "The following command uses the minimum amount of RAM, which is 128MB:"
msgstr "下面的命令使用最小内存128MB："

msgid ""
"The following figure shows a completed partition table with a 1GB virtual "
"disk:"
msgstr "下图显示1GB虚拟磁盘分完区后的分区表："

msgid ""
"The installer may ask you to choose a host name. The default "
"(<literal>localhost.localdomain</literal>) is fine. You install the "
"<systemitem class=\"service\">cloud-init</systemitem> package later, which "
"sets the host name on boot when a new instance is provisioned using this "
"image."
msgstr ""
"安装程序让你输入主机名称，默的认(<literal>localhost.localdomain</literal>) 也"
"可以，随后你将安装 <systemitem class=\"service\">cloud-init</systemitem> 包，"
"它将在镜像将来启动时设置主机名。"

msgid ""
"The installer may ask you to choose a hostname. The default "
"(<literal>ubuntu</literal>) is fine. We will install the cloud-init package "
"later, which will set the hostname on boot when a new instance is "
"provisioned using this image."
msgstr ""
"安装程序要求填入主机名。默认的 (<literal>ubuntu</literal>) 即可。后面我们将安"
"装 cloud-init 包，cloud-init 包将在将来使用镜像创建新虚拟机启动的时候设置主机"
"名。"

msgid ""
"The minimum supported disk size for FreeBSD is 1GB. Because the goal is to "
"make the smallest possible base image, the example uses that minimum size. "
"This size is sufficient to include the optional doc, games, and lib32 "
"collections. To include the ports collection, add another 1GB. To include "
"src, add 512MB."
msgstr ""
"FreeBSD 支持的最小磁盘大小是1GB。因为我们的目标是建立一个最小化的基础镜像文"
"件，所以示例使用的最小磁盘大小，足够容纳可选的文档，游戏以及lib32库。要包含"
"ports软件，需要添加额外的1GB空间，要包含源码，再添加512M空间。"

msgid ""
"The name of your virtual machine image is <literal>centos-6.4</literal>; you "
"need this name when you use <placeholder-1/> commands to manipulate the "
"state of the image."
msgstr ""
"你的虚拟机名称是 <literal>centos-6.4</literal>；在你使用 <placeholder-1/> 命"
"令操作虚拟机状态的时候你需要使用这个名称。"

msgid ""
"The operating system records the MAC address of the virtual Ethernet card in "
"locations such as <filename>/etc/sysconfig/network-scripts/ifcfg-eth0</"
"filename> and <filename>/etc/udev/rules.d/70-persistent-net.rules</filename> "
"during the instance process. However, each time the image boots up, the "
"virtual Ethernet card will have a different MAC address, so this information "
"must be deleted from the configuration file."
msgstr ""
"操作系统会在<filename>/etc/sysconfig/network-scripts/ifcfg-eth0</filename> "
"和 <filename>/etc/udev/rules.d/70-persistent-net.rules</filename> 这类文件记"
"录下网卡MAC地址，但是，虚拟机的网卡MAC地址在每次虚拟机创建的时候都会不同，因"
"此这些信息必须从配置文件删除掉。"

msgid ""
"The operating system records the MAC address of the virtual Ethernet card in "
"locations such as <filename>/etc/udev/rules.d/70-persistent-net.rules</"
"filename> during the installation process. However, each time the image "
"boots up, the virtual Ethernet card will have a different MAC address, so "
"this information must be deleted from the configuration file."
msgstr ""
"操作系统会在<filename>/etc/sysconfig/network-scripts/ifcfg-eth0</filename> "
"和 <filename>/etc/udev/rules.d/70-persistent-net.rules</filename> 这类文件记"
"录下网卡MAC地址，但是，虚拟机的网卡MAC地址在每次虚拟机创建的时候都会不同，因"
"此这些信息必须从配置文件删除掉。"

msgid ""
"The previous script only gets the ssh public key from the metadata server. "
"It does not get user data, which is optional data that can be passed by the "
"user when requesting a new instance. User data is often used to run a custom "
"script when an instance boots."
msgstr ""
"前面的脚本仅仅只是从元数据服务获取了 ssh 的公钥，并未获取用户数据，用户数据是"
"用户申请新虚拟机可以传递到虚拟机内的可选数据，通常用于在虚拟机启动时做一些定"
"制化工作。"

msgid ""
"The simplest way to obtain a virtual machine image that works with OpenStack "
"is to download one that someone else has already created."
msgstr ""
"获取 OpenStack 兼容的虚拟机镜像的最简单的方法就是直接下载已经制作好的镜像。"

msgid "The simplest way to support this is to install in your image the:"
msgstr "实现以上操作最简单的方法是安装以下软件到镜像内："

msgid ""
"The size of the disk in a virtual machine image is determined when you "
"initially create the image. However, OpenStack lets you launch instances "
"with different size drives by specifying different flavors. For example, if "
"your image was created with a 5GB disk, and you launch an instance with a "
"flavor of m1.small. The resulting virtual machine instance has, by default, "
"a primary disk size of 10GB. When the disk for an instance is resized up, "
"zeros are just added to the end."
msgstr ""
"镜像磁盘的大小在最开始创建磁盘的时候就已经决定了的，然而，OpenStack 通过指定"
"不同的硬件配置规格让你启动磁盘大小不同的虚拟机。例如，如果你的镜像是5GB，你创"
"建的虚拟机指定的虚拟机规格是 m1.small 。最终创建的虚拟机的系统磁盘是10GB。当"
"虚拟机的磁盘扩充的时候，在磁盘的后面以0填充。"

msgid ""
"The typical way that users access virtual machines running on OpenStack is "
"to ssh using public key authentication. For this to work, your virtual "
"machine image must be configured to download the ssh public key from the "
"OpenStack metadata service or config drive, at boot time."
msgstr ""
"访问在 OpenStack 内运行的虚拟机典型的办法是通过 ssh 使用公钥认证。为了实现这"
"个，你的虚拟机镜像必须被配置为在虚拟机启动时能从 OpenStack 元数据服务获取ssh "
"公钥或者使用config 磁盘。"

msgid ""
"The virtualized CMOS almost always stores its time in UTC, so unless you "
"know otherwise, select UTC."
msgstr "虚拟的CMOS始终存储它的时间时区为UTC,除非你知道原因，否则选择UTC."

msgid "Then, during the boot process, you must:"
msgstr "然后，在启动过程中，你必须："

msgid ""
"There are different options for partitioning the disks. The default "
"installation uses LVM partitions, and creates three partitions (<filename>/"
"boot</filename>, <filename>/</filename>, swap), which works fine. "
"Alternatively, you might want to create a single ext4 partition that is "
"mounted to \"<literal>/</literal>\", which also works fine."
msgstr ""
"磁盘分区有好几个选项，默认使用LVM分区，会创建(<filename>/boot</filename>, "
"<filename>/</filename>, swap)三个分区，默认设置就可以正常工作。另外你也可以只"
"建立一个 ext4 分区挂载到 \"<literal>/</literal>\"，这也可以正常工作。 "

msgid ""
"There are different options for partitioning the disks. The default "
"installation will use LVM partitions, and will create three partitions "
"(<filename>/boot</filename>, <filename>/</filename>, swap), and this will "
"work fine. Alternatively, you may wish to create a single ext4 partition, "
"mounted to \"<literal>/</literal>\", should also work fine."
msgstr ""
"目前有几个分区选项。默认的安装程序使用 LVM 分区，将创建三个分区 (<filename>/"
"boot</filename>, <filename>/</filename>, swap)，使用默认的即可。作为可选的，"
"你也可以创建单个 ext4 分区，挂载 \"<literal>/</literal>\"。"

msgid "There are several tools that are designed to automate image creation."
msgstr "有几个工具设计为自动创建镜像。"

msgid ""
"There is a utility called <placeholder-1/>, that performs various cleanup "
"tasks such as removing the MAC address references. It will clean up a "
"virtual machine image in place:"
msgstr ""
"目前有  <placeholder-1/> 工具可以完成清理虚拟机镜像内的 MAC 地址相关的信息。"

msgid ""
"Therefore, if you use Xen, we recommend that when you create your images, "
"you create a single ext3 or ext4 partition (not managed by LVM). Otherwise, "
"read on."
msgstr ""
"因此，如果你使用 Xen ，我们推荐当你创建镜像时，只建立一个 ext3 或者 ext4 分区"
"（而且没有LVM管理）。否则，继续往下看。"

msgid ""
"This Oz template specifies where to download the Centos 6.4 install ISO. Oz "
"will use the version information to identify which kickstart file to use. In "
"this case, it will be <link xlink:href=\"https://github.com/clalancette/oz/"
"blob/master/oz/auto/RHEL6.auto\">RHEL6.auto</link>. It adds EPEL as a "
"repository and install the <literal>epel-release</literal>, <literal>cloud-"
"utils</literal>, and <literal>cloud-init</literal> packages, as specified in "
"the <literal>packages</literal> section of the file."
msgstr ""
"Oz 模板指定了 Centos 6.4 安装 ISO 的下载位置。 Oz 使用版本信息确认了使用哪一"
"个 kickstart 文件。在这个示例中，是 <link xlink:href=\"https://github.com/"
"clalancette/oz/blob/master/oz/auto/RHEL6.auto\">RHEL6.auto</link> 。它添加 "
"EPEL 软件库，并且安装在 <literal>packages</literal> 字段指定的 <literal>epel-"
"release</literal>, <literal>cloud-utils</literal>, 以及 <literal>cloud-init</"
"literal> 包。"

msgid "This VM must also have Internet access to download packages."
msgstr "虚拟机必须能访问 Internet 以便下载软件包。"

msgid ""
"This example creates a Windows Server 2012 qcow2 image, using <placeholder-1/"
"> and the KVM hypervisor."
msgstr ""
"这个例子创建一个Windows Server 2012 qcow2镜像，使用<placeholder-1/>以及KVM虚"
"拟化。"

msgid ""
"This example creates a generic, bootable Ubuntu image of the latest release."
msgstr "这个示例创建了一个通用的，可启动的最新版本 Ubuntu 镜像。"

msgid ""
"This example creates the image as before, but for arm architecture. More "
"elements are available in the <link xlink:href=\"https://github.com/"
"openstack/diskimage-builder/tree/master/elements\">git source directory</"
"link> and documented in the <link xlink:href=\"http://docs.openstack.org/"
"developer/diskimage-builder/elements.html\">diskimage-builder elements "
"documentation</link>."
msgstr ""
"这个示例使用之前创建的镜像，但是针对 ARM 结构，更多的基础元素参见 <link "
"xlink:href=\"https://github.com/openstack/diskimage-builder/tree/master/"
"elements\">git 源目录</link> 且文档参考 <link xlink:href=\"http://docs."
"openstack.org/developer/diskimage-builder/elements.html\">镜像生成器基础元素"
"文档。 "

msgid ""
"This example installs a Ubuntu 14.04 (Trusty Tahr) image. To create an image "
"for a different version of Ubuntu, follow these steps with the noted "
"differences."
msgstr ""
"这个示例安装Ubuntu 14.04 (Trusty Tahr) 版本镜像。创建其他版本的Ubuntu镜像，注"
"意下面安装过程的标记不同的地方。"

msgid ""
"This example shows how to create a FreeBSD 10 image. To create a FreeBSD 9.2 "
"image, follow these steps with the noted differences."
msgstr ""
"这个示例显示了如何创建 FreeBSD 10 镜像，要创建 FreeBSD 9.2 镜像，注意以下步骤"
"中提示。"

msgid ""
"This example shows how to use <placeholder-1/> to modify a file. The command "
"can take either a filename as an argument with the <literal>-a</literal> "
"flag, or a domain name as an argument with the <literal>-d</literal> flag. "
"The following examples shows how to use this to modify the <filename>/etc/"
"shadow</filename> file in instance with libvirt domain name "
"<literal>instance-000000e1</literal> that is currently running:"
msgstr ""
"这个示例演示了如何使用<placeholder-1/>修改文件，这个命令既可以通过使用"
"<literal>-a</literal>标记后跟文件名作为参数，也可以通过使用<literal>-d</"
"literal>后跟虚拟机的 domain 名称作为参数。下面的示例演示如何修改在libvirt中运"
"行的 domain 名称为 <literal>instance-000000e1</literal>的虚拟机内<filename>/"
"etc/shadow</filename>文件："

msgid ""
"This example shows you how to install a CentOS image and focuses mainly on "
"CentOS 6.4. Because the CentOS installation process might differ across "
"versions, the installation steps might differ if you use a different version "
"of CentOS."
msgstr ""
"这个示例演示如何安装 CentOS 镜像，主要是 CentOS 6.4。由于不同版本的 CentOS 安"
"装过程稍有差别，因此其他版本安装过程可能和示例中有不一样的地方。"

msgid ""
"This guide describes how to obtain, create, and modify virtual machine "
"images that are compatible with OpenStack."
msgstr "这个指南描述了如何获取，创建以及修改 OpenStack 兼容的虚拟机镜像。"

msgid "This is a virtual machine image in raw format, as described above."
msgstr "裸格式镜像，如前面描述。"

msgid ""
"This menu enables you to update previous settings. Check that the settings "
"are correct, and click <guibutton>exit</guibutton>."
msgstr ""
"这个菜单让你更新之前的设置，检查参数是否正确，然后选择 <guibutton>exit</"
"guibutton>。"

msgid ""
"This sets console output to go to the serial console, which is displayed by "
"<placeholder-1/>, and the video console for sites with VNC or Spice "
"configured."
msgstr ""
"设置console输出到串口控制台，可以由  <placeholder-1/> 查看，以及图形console使"
"用 VNC 或者 Spice 。"

msgid ""
"This starts a guestfish session. Note that the guestfish prompt looks like a "
"fish: <literal>&gt; &lt;fs&gt;</literal>."
msgstr ""
"通过上面命令，进入了 guestfish 会话，注意 guestfish提示符像一条鱼的样子： "
"<literal>&gt; &lt;fs&gt;</literal>."

msgid "This will launch a VM and start the installation process."
msgstr "这将启动一个虚拟机并且开始安装过程。"

msgid ""
"To allow <glossterm>Cloudbase-Init</glossterm> to run scripts during an "
"instance boot, set the PowerShell execution policy to be unrestricted:"
msgstr ""
"为了让<glossterm>Cloudbase-Init</glossterm>在系统启动时运行脚本，设置"
"PowerShell执行策略解除限制。"

msgid "To build an image, call the following script:"
msgstr "要创建镜像，输入以下命令："

msgid "To create a FreeBSD image"
msgstr "创建 FreeBSD 镜像"

msgid ""
"To eject a disk by using the <placeholder-1/> command, libvirt requires that "
"you attach an empty disk at the same target that the CDROM was previously "
"attached, which should be <literal>hdc</literal>. You can confirm the "
"appropriate target using the <placeholder-2/> command."
msgstr ""
"使用 <placeholder-1/> 卸载磁盘，libvirt需要挂接一个空磁盘到之前挂接CDROM的地"
"方，设备名应该是 <literal>hdc</literal>。可以使用 <placeholder-2/> 命令来确"
"认。"

msgid ""
"To eject a disk using <placeholder-1/>, libvirt requires that you attach an "
"empty disk at the same target that the CDROM was previously attached, which "
"should be <literal>hdc</literal>. You can confirm the appropriate target "
"using the <placeholder-2/> command."
msgstr ""
"使用 <placeholder-1/> 弹出光驱时，libvirt 要求你挂一个空磁盘在光驱相同的位"
"置。在之前盘符是 <literal>hdc</literal> 。你可以使用 <placeholder-2/>  命令来"
"完成。"

msgid ""
"To enable the hypervisor to reboot or shutdown an instance, you must install "
"and run the <systemitem class=\"service\">acpid</systemitem> service on the "
"guest system."
msgstr ""
"为了让虚拟化层能重启和关闭虚拟机，必须在虚拟机内安装并运行 <systemitem class="
"\"service\">acpid</systemitem> 服务。"

msgid ""
"To install the operating system, complete the following steps inside the VM:"
msgstr "在虚拟机里，完成以下步骤安装操作系统："

msgid ""
"To keep things brief, we'll sometimes use the term \"image\" instead of "
"\"virtual machine image\"."
msgstr "为了简化，有时文档使用 \"镜像\" 代替 \"虚拟机镜像\" 。"

msgid "To run this:"
msgstr "运行："

msgid ""
"To see how the settings affect the deletion of a running instance, check the "
"directory where the images are stored:"
msgstr "查看以上设置对被删除的虚拟机镜像文件的影响，查看以下目录："

msgid ""
"To set the metadata source to be used by the image run the <placeholder-1/> "
"command against the <package>cloud-init</package> package. When prompted "
"select the <literal>EC2</literal> data source:"
msgstr ""
"运行 <placeholder-1/> 命令设置镜像  <package>cloud-init</package> 软件包使用"
"的元数据源。当屏幕出现提示时，选择 <literal>EC2</literal> 数据源。"

msgid ""
"To verify that the libvirt \"default\" network is enabled, use the "
"<placeholder-1/> command and verify that the \"default\" network is active:"
msgstr ""
"检查  \"default\"  默认网络是否激活，使用 <placeholder-1/> 命令并查看 "
"\"default\" 网络是否是启用状态。"

msgid "Tool support for image creation"
msgstr "支持创建镜像的工具"

msgid "UEC tarball"
msgstr "UEC tarball"

msgid ""
"Ubuntu Enterprise Cloud refers to a discontinued Eucalyptus-based Ubuntu "
"cloud solution that has been replaced by the OpenStack-based Ubuntu Cloud "
"Infrastructure."
msgstr ""
"Ubuntu 企业云是基于OpenStack 的云基础结构 ，之前是已经中断的基于桉树云的解决"
"方案。"

msgid ""
"Undefine the domain since you no longer need to have this virtual machine "
"image managed by libvirt:"
msgstr ""
"将虚拟机domain undefine掉，以为你已经完成镜像制作不再需要libvirt进行管理。"

msgid "Undefine the libvirt domain"
msgstr "删除 libvirt 虚拟机域"

msgid "Updated title for consistency."
msgstr "为一致性更新标题。"

msgid "Use <package>cloud-init</package> to fetch the public key"
msgstr "使用 <package>cloud-init</package> 获取公钥"

msgid ""
"Use <placeholder-1/> or <placeholder-2/> to connect to the VM and start the "
"Windows installation."
msgstr ""
"使用  <placeholder-1/> 或 <placeholder-2/> 命令连接到虚拟机开始 Windows 安"
"装。"

msgid "Use cloud-init to fetch the public key"
msgstr "使用 cloud-init 获取公钥"

msgid ""
"Use options in <filename>nova.conf</filename> to control whether, and for "
"how long, unused base images are stored in <filename>/var/lib/nova/instances/"
"_base/</filename>. If you have configured live migration of instances, all "
"your compute nodes share one common <filename>/var/lib/nova/instances/</"
"filename> directory."
msgstr ""
"使用  <filename>nova.conf</filename>的选项来控制在 <filename>/var/lib/nova/"
"instances/_base/</filename> 目录中是否保存或者多长时间，未使用的基础镜像。如"
"果你配置了虚拟机活迁移。所有的计算节点还需要共享同一个 <filename>/var/lib/"
"nova/instances/</filename> 目录"

msgid ""
"Use the <literal>virt-sysprep</literal> utility. This performs various "
"cleanup tasks such as removing the MAC address references. It will clean up "
"a virtual machine image in place:"
msgstr ""
"使用 <literal>virt-sysprep</literal> 工具，它将通过几个步骤完成清除镜像内相关"
"记录的MAC地址信息，"

msgid "Use the <placeholder-1/> command to get the VNC port number."
msgstr "使用 <placeholder-1/> 命令获取 VNC 端口号。"

msgid "Use the virt-manager X11 GUI"
msgstr "使用  virt-manager X11 图形界面"

msgid "Use virt-install and connect by using a local VNC client"
msgstr "使用 virt-install 且使用本地 VNC 客户端连接"

msgid "Username: <literal>Administrator</literal>"
msgstr "用户名： <literal>Administrator</literal>"

msgid "VBoxManage: VDI (VirtualBox) to raw"
msgstr "VBoxManage: VDI (VirtualBox) 转换为 raw"

msgid "VDI"
msgstr "VDI"

msgid "VDI (VirtualBox)"
msgstr "VDI (VirtualBox)"

msgid "VHD"
msgstr "VHD"

msgid "VHD (Hyper-V)"
msgstr "VHD (Hyper-V)"

msgid "VHDX"
msgstr "VHDX"

msgid "VM Image Guide"
msgstr "虚拟机镜像指南"

msgid "VMBuilder"
msgstr "VMBuilder"

msgid "VMDK"
msgstr "VMDK"

msgid "VMDK (VMware)"
msgstr "VMDK (VMware)"

msgid "VeeWee"
msgstr "VeeWee"

msgid "Verify the libvirt default network is running"
msgstr "检查 libvirt 默认网络是否运行"

msgid "Volume-from-Image properties"
msgstr "镜像转换的卷属性"

msgid "Wait for the machine shutdown."
msgstr "等待虚机关闭。"

msgid ""
"We don't recommend creating raw images by dd'ing block device files, we "
"discuss how to create raw images later."
msgstr ""
"我们不推荐使用dd块设备的方法创建裸格式镜像，我们将在后面讨论如何创建裸格式镜"
"像。"

msgid ""
"We must first use the <placeholder-1/> command at the guestfish prompt "
"before we can do anything else. This will launch a virtual machine, which "
"will be used to perform all of the file manipulations.<placeholder-2/> We "
"can now view the file systems in the image using the <placeholder-3/> "
"command:<placeholder-4/>We need to mount the logical volume that contains "
"the root partition: <placeholder-5/>"
msgstr ""
"在做任何操作之前，必须先在 guestfish提示符运行<placeholder-1/>命令。它会启动"
"一个虚拟机，用于完成我们所以的对文件的操作。<placeholder-2/>通过"
"<placeholder-3/>命令，我们可查看镜像内的文件系统列表：<placeholder-4/>我们必"
"须挂载包含根分区的那个逻辑卷：<placeholder-5/>"

msgid ""
"We're done, so we can exit using the <placeholder-1/> command:<placeholder-2/"
">"
msgstr ""
"一切都完成后，我们可以使用 <placeholder-1/>命令退出guestfish提示符："
"<placeholder-2/>"

msgid "Web site name: <literal>mirror.umd.edu</literal>"
msgstr "网站地址：<literal>mirror.umd.edu</literal>"

msgid "What is a virtual machine image?"
msgstr "虚拟机镜像是什么？"

msgid ""
"When building Ubuntu images <placeholder-1/> must be explicitly configured "
"for the metadata source in use. The OpenStack metadata server emulates the "
"EC2 metadata service used by images in Amazon EC2."
msgstr ""
"在创建 Ubuntu 镜像时，<placeholder-1/> 必须明确的配置元数据源。OpenStack 元数"
"据服务仿效 Amazon EC2 元数据服务。"

msgid ""
"When creating Block Storage volumes from images, also consider your "
"configured image properties. If you alter the core image properties, you "
"should also update your Block Storage configuration. Amend <placeholder-1/> "
"in the <filename>/etc/cinder/cinder.conf</filename> file on all controller "
"nodes to match the core properties you have set in the Image service."
msgstr ""
"当从镜像创建块存储卷的时候，需要考虑镜像的属性。如果你修改镜像的核心属性，你"
"也应该更新块存储配置。修改所有匹配你设置在镜像服务的核心属性的控制节点 的"
"<filename>/etc/cinder/cinder.conf</filename> 文件的 <placeholder-1/> 值。"

msgid ""
"When prompted about the optional <literal>doc</literal>, <literal>games</"
"literal>, <literal>lib32</literal>, <literal>ports</literal>, and "
"<literal>src</literal> system components, select only those that you need. "
"It is possible to have a fully functional installation without selecting "
"additional components selected. As noted previously, a minimal system with a "
"1GB virtual disk supports doc, games, and lib32 inclusive. The ports "
"collection requires at least 1GB additional space and possibly more if you "
"plan to install many ports. The src collection requires an additional 512MB."
msgstr ""
"当提示可选<literal>doc</literal>, <literal>games</literal>, <literal>lib32</"
"literal>, <literal>ports</literal>, and <literal>src</literal> 系统组件时，选"
"择你需要的组件，当你不选可选的系统组件时也可以完成一个完全功能安装，如前提"
"示，最小化系统的1GB虚拟磁盘支持包含doc, games, and lib32内容。要包含ports 软"
"件组需要至少1GB额外空间，如果你计划安装更多port软件时还需要更多的空间，"
"src（源代码）组需要额外512MB空间。"

msgid ""
"When prompted, choose to run the ISO in <guibutton>Install</guibutton> mode."
msgstr "当出现提示的时候，选择运行ISO 于 <guibutton>Install</guibutton> 模式。"

msgid ""
"When the installation is done, in the <guilabel>Complete the Cloudbase-Init "
"Setup Wizard</guilabel> window, select the <guilabel>Run Sysprep</guilabel> "
"and <guilabel>Shutdown</guilabel> check boxes and click <guibutton>Finish</"
"guibutton>."
msgstr ""
"当安装完成后，在<guilabel>Complete the Cloudbase-Init Setup Wizard</"
"guilabel> 窗口，选择<guilabel>Run Sysprep</guilabel>和<guilabel>Shutdown</"
"guilabel> 复选框，然后点击<guibutton>Finish</guibutton>。"

msgid ""
"When using qcow2 format images you should check the option 'customize before "
"install', go to disk properties and explicitly select the qcow2 format. This "
"ensures the virtual machine disk size will be correct."
msgstr ""
"使用 qcow2 格式镜像你应该勾选  'customize before install'，然后跳转到磁盘属性"
"并且确保明确选择了qcow2格式。这将保证虚拟机磁盘大小正确。"

msgid ""
"When using the libvirt <literal>default</literal> network, libvirt will "
"connect the virtual machine's interface to a bridge called <literal>virbr0</"
"literal>. There is a dnsmasq process managed by libvirt that will hand out "
"an IP address on the 192.168.122.0/24 subnet, and libvirt has iptables rules "
"for doing NAT for IP addresses on this subnet."
msgstr ""
"当使用 libvirt  <literal>default</literal> 默认网络时，libvirt 将连接虚拟机"
"到  <literal>virbr0</literal> 网桥。libvirt管理下的 dnsmasq 进程将处理  "
"192.168.122.0/24 子网上的 IP地址。且 libvirt 有 iptables 规则负责这个子网 "
"NAT 转发。"

msgid ""
"When you boot for the first time after install, it may ask you about "
"authentication tools, you can just choose 'Exit'. Then, log in as root using "
"the root password you specified."
msgstr ""
"当你安装后首次启动时，虚拟机将会询问你认证工具，你只需要选择 'Exit'。然后使用"
"你设置的root密码以root用户登录。"

msgid ""
"When you boot for the first time after installation, you might be prompted "
"about authentication tools. Select <guilabel>Exit</guilabel>. Then, log in "
"as root."
msgstr ""
"安装后的第一次启动，会提示认证工具（我咋没遇到过啊，文档bug吧）。选择"
"<guilabel>Exit</guilabel>。然后，以root用户登录。"

msgid ""
"When you create a Linux image, you must decide how to partition the disks. "
"The choice of partition method can affect the resizing functionality, as "
"described in the following sections."
msgstr ""
"当创建 Linux 镜像时，你必须决定如何分区。选择不同的分区方法会对重新调整分区大"
"小有不同的影响，请看以下章节的描述。"

msgid "When you're done, clean up:"
msgstr "一切操作完成后，清理命令："

msgid "When you're done, clean up:<placeholder-1/>"
msgstr "完成后，清理命令： <placeholder-1/>"

msgid ""
"With these packages installed, the image performs the root partition resize "
"on boot. For example, in the <filename>/etc/rc.local</filename> file. These "
"packages are in the Ubuntu and Debian package repository, as well as the "
"EPEL repository (for Fedora/RHEL/CentOS/Scientific Linux guests)."
msgstr ""
"通过安装这些包，镜像在启动时完成root分区改变大小。例如，通过设置<filename>/"
"etc/rc.local</filename> 文件，这些包包在Ubuntu 和 Debian 包管理库内以及 EPEL "
"库（ Fedora/RHEL/CentOS/Scientific 系列 Linux）"

msgid "Write a custom script to fetch the public key"
msgstr "编写脚本获取公钥"

msgid "Write a script to fetch the public key (if no cloud-init)"
msgstr "编写脚本获取公钥（如果未使用cloud-init）"

msgid "Xen: 1 ext3/ext4 partition (no LVM, no /boot, no swap)"
msgstr "Xen: 单一 ext3/ext4 分区 ( 无LVM , 无 /boot ,无swap分区区 )"

msgid ""
"You can also use the GUI to detach and reboot it by manually stopping and "
"starting."
msgstr "你也可以使用图形界面手工停止和启动虚拟机来完成以上功能。"

msgid ""
"You can change the name of the account used by <literal>cloud-init</literal> "
"by editing the <filename>/etc/cloud/cloud.cfg</filename> file and adding a "
"line with a different user. For example, to configure <literal>cloud-init</"
"literal> to put the key in an account named admin, add this line to the "
"configuration file:"
msgstr ""
"你可以编辑 <filename>/etc/cloud/cloud.cfg</filename> 文件添加一行修改 "
"<literal>cloud-init</literal> 使用的账户名，例如，添加以下这行到配置文件，来"
"配置 <literal>cloud-init</literal> 存放公钥到admin账户。"

msgid ""
"You can change the name of the account used by <package>cloud-init</package> "
"by editing the <filename>/etc/cloud/cloud.cfg</filename> file and adding a "
"line with a different user. For example, to configure <package>cloud-init</"
"package> to put the key in an account named <literal>admin</literal>, edit "
"the configuration file so it has the line:"
msgstr ""
"你可以编辑 <filename>/etc/cloud/cloud.cfg</filename> 文件添加一行修改 "
"<literal>cloud-init</literal> 使用的账户名，例如，添加以下这行到配置文件，来"
"配置 <literal>cloud-init</literal> 存放公钥到admin账户："

msgid ""
"You can change the name of the account used by <systemitem class=\"service"
"\">cloud-init</systemitem> by editing the <filename>/etc/cloud/cloud.cfg</"
"filename> file and adding a line with a different user. For example, to "
"configure <systemitem class=\"service\">cloud-init</systemitem> to put the "
"key in an account named <literal>admin</literal>, add this line to the "
"configuration file:"
msgstr ""
"你可以编辑 <filename>/etc/cloud/cloud.cfg</filename> 文件添加一行修改 "
"<literal>cloud-init</literal> 使用的账户名，例如，添加以下这行到配置文件，来"
"配置 <literal>cloud-init</literal> 存放公钥到 <literal>admin</literal> 账户。"

msgid ""
"You can change the name of the account used by cloud-init by editing the "
"<filename>/etc/cloud/cloud.cfg</filename> file and adding a line with a "
"different user. For example, to configure cloud-init to put the key in an "
"account named \"admin\", edit the config file so it has the line:"
msgstr ""
"你可以编辑 <filename>/etc/cloud/cloud.cfg</filename> 文件添加一行修改 "
"<literal>cloud-init</literal> 使用的账户名，例如，添加以下这行到配置文件，来"
"配置 <literal>cloud-init</literal> 存放公钥到admin账户。"

msgid ""
"You can set the container format for your image to one of the following "
"values:"
msgstr "你可设置你的镜像容器格式为以下之一："

msgid ""
"You can specify up to 1GB additional RAM to make the installation process "
"run faster."
msgstr "你可以指定最大1GB内存让安装程序运行更快。"

msgid ""
"You do not need a <filename>/boot</filename> partition unless your image is "
"an older Linux distribution that requires that <filename>/boot</filename> is "
"not managed by LVM."
msgstr ""
"你无须 <filename>/boot</filename>分区，除非你的镜像使用的是较老的 Linux 发行"
"版，那些发行版要求 <filename>/boot</filename> 目录不能被 LVM管理。"

msgid ""
"You do not need to add users at this time. The <application>bsd-cloudinit</"
"application> program adds a <literal>freebsd</literal> user account if one "
"does not exist. The <systemitem class=\"service\">ssh</systemitem> keys for "
"this user are associated with OpenStack. To customize this user account, you "
"can create it now. For example, you might want to customize the shell for "
"the user."
msgstr ""
"你当前不需要添加用户，如果 <literal>freebsd</literal> 账户不存在， "
"<application>bsd-cloudinit</application> 程序会添加一个 <literal>freebsd</"
"literal> 用户账户。用户的<systemitem class=\"service\">ssh</systemitem> 秘钥"
"和OpenStack相关联。要定制用户，你可以现在创建，例如，你可能想定制用户的"
"shell。"

msgid ""
"You must configure the image so that the kernel writes the boot log to the "
"<literal>ttyS0</literal> device. In particular, the <literal>console=ttyS0</"
"literal> argument must be passed to the kernel on boot."
msgstr ""
"你必须配置镜像以便镜像内核输出启动日志到 <literal>ttyS0</literal> 设备，尤其"
"是  <literal>console=ttyS0</literal>参数必须在启动时传递给内核。"

msgid "You must configure these items for your image:"
msgstr "你的镜像必须满足以下配置："

msgid ""
"You must install an ssh server into the image and ensure that it starts up "
"on boot, or you cannot connect to your instance by using ssh when it boots "
"inside of OpenStack. This package is typically called <literal>openssh-"
"server</literal>."
msgstr ""
"在镜像内你必须安装 SSH 服务并且确保它在启动时自动启动，否则你不能通过 ssh 连"
"接到你在 OpenStack 内的虚拟机。ssh 服务包名通常叫做 <literal>openssh-server</"
"literal> 。"

msgid ""
"You need the <literal>nbd</literal> (network block device) kernel module "
"loaded to mount qcow2 images. This will load it with support for 16 block "
"devices, which is fine for our purposes. As root:<placeholder-1/>"
msgstr ""
"你需要加载 <literal>nbd</literal> （网络块设备）内核模块来挂载 qcow2 镜像文"
"件。下面将加载满足我们需求的支持16个块设备，以root用户执行：<placeholder-1/>"

msgid ""
"You now have a VM that boots from the downloaded install ISO and is "
"connected to the blank virtual disk that you created previously."
msgstr ""
"现在你的虚拟机从之前你下载的ISO文件启动并且使用了之前准备好的空白虚拟磁盘。"

msgid ""
"You saved the netinstall ISO image to the <filename>/data/isos</filename> "
"directory."
msgstr "你保存下载的网络安装ISO镜像在 <filename>/data/isos</filename> 目录。"

msgid ""
"Your image must be able to resize its partitions on boot to match the size "
"requested by the user. Otherwise, after the instance boots, you must "
"manually resize the partitions to access the additional storage to which you "
"have access when the disk size associated with the flavor exceeds the disk "
"size with which your image was created."
msgstr ""
"你的镜像必须能在启动的时候重新伸缩大小以便匹配最终用户的需求。否则，在虚拟机"
"启动后，你需要手工改变分区的容量才能使用虚拟机指定的硬件配置规格的磁盘分容量"
"大于你镜像原有容量的那部分容量。"

msgid "Your script must do something like the following:<placeholder-1/>"
msgstr "你的脚本需要完成以下功能：<placeholder-1/>"

msgid "current"
msgstr "current"

msgid "fedora-20"
msgstr "fedora-20"

msgid "guestfish"
msgstr "guestfish"

msgid "guestmount"
msgstr "guestmount"

msgid "imagefactory"
msgstr "imagefactory"

msgid "img-uuid"
msgstr "img-uuid"

msgid "node-root"
msgstr "node-root"

msgid "preallocate_images=none"
msgstr "preallocate_images=none"

msgid "qcow2"
msgstr "qcow2"

msgid "qcow2 (KVM, Xen)"
msgstr "qcow2 (KVM, Xen)"

msgid "qed"
msgstr "qed"

msgid "qemu-img format strings"
msgstr "qemu-img 格式字符列表"

msgid "raw"
msgstr "raw"

msgid "remove_unused_base_images=True"
msgstr "remove_unused_base_images=True"

msgid "remove_unused_original_minimum_age_seconds=86400"
msgstr "remove_unused_original_minimum_age_seconds=86400"

msgid "remove_unused_resized_minimum_age_seconds=3600"
msgstr "remove_unused_resized_minimum_age_seconds=3600"

msgid "sda6"
msgstr "sda6"

#. Put one translator per line, in the form of NAME <EMAIL>, YEAR1, YEAR2
msgid "translator-credits"
msgstr "translator-credits"

msgid "vdi"
msgstr "vdi"

msgid "vg00"
msgstr "vg00"

msgid "virt-* tools"
msgstr "virt-* tools"

msgid "vm-image"
msgstr "vm-image"

msgid "vm-name"
msgstr "vm-name"

msgid "vmdk"
msgstr "vmdk"

msgid "vpc"
msgstr "vpc"