708733e495
After some changes to the FC connector we have introduced a regression on the way we do the scans, and we end up scanning using wildcards even though we shouldn't. The targets in the "initiator_target_map" don't mean that they are all connected, so we must take that into account. With the current code, if we have the following connections: HBA host7 ---- SWITCH ---- port W (channel 0, target 2) \--- SWITCH ---- port X (channel 0, target 3) HBA host8 ---- SWITCH ---- port Y (channel 0, target 2) \--- SWITCH ---- port Z (channel 0, target 3) We will end up with the following scans 8 scans for LUN L: - - L > host7 - - L > host7 0 2 L > host7 0 3 L > host7 0 2 L > host8 0 3 L > host8 - - L > host8 - - L > host8 Which correspond to the responses from _get_hba_channel_scsi_target like this: port Y port Z port W port X host7 ... ['-','-',L] ['-','-',L] ['0','2',L] ['0','3',L] host8 ... ['0','2',L] ['0','3',L] ['-','-',L] ['-','-',L] And we should only be doing 4 scans: 0 2 L > host7 0 3 L > host7 0 2 L > host8 0 3 L > host8 Most storage arrays get their target ports automatically detected by the Linux FC initiator and sysfs gets populated with that information, but there are some that don't. We'll do a narrow scan using the channel, target, and LUN for the former and a wider scan for the latter. If all paths to a former type of array were down on the system boot the array could look like it's of the latter type and make us bring us unwanted volumes into the system by doing a broad scan. To prevent this from happening Cinder drivers can use the "enable_wildcard_scan" key in the connection information to let us know they don't want us to do broad scans even if no target ports are found (because they know the cause is there's no connection). Close-Bug: #1849504 Related-Bug: #1765000 Related-Bug: #1828440 Change-Id: I5dbefaff43fb902b15117b443fc92f7b6a6ad8c9
335 lines
14 KiB
Python
335 lines
14 KiB
Python
# (c) Copyright 2013 Hewlett-Packard Development Company, L.P.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License"); you may
|
|
# not use this file except in compliance with the License. You may obtain
|
|
# a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
# License for the specific language governing permissions and limitations
|
|
# under the License.
|
|
|
|
"""Generic linux Fibre Channel utilities."""
|
|
|
|
import errno
|
|
import os
|
|
|
|
from oslo_concurrency import processutils as putils
|
|
from oslo_log import log as logging
|
|
|
|
from os_brick.initiator import linuxscsi
|
|
|
|
LOG = logging.getLogger(__name__)
|
|
|
|
|
|
class LinuxFibreChannel(linuxscsi.LinuxSCSI):
|
|
|
|
def has_fc_support(self):
|
|
FC_HOST_SYSFS_PATH = '/sys/class/fc_host'
|
|
if os.path.isdir(FC_HOST_SYSFS_PATH):
|
|
return True
|
|
else:
|
|
return False
|
|
|
|
def _get_hba_channel_scsi_target_lun(self, hba, conn_props):
|
|
"""Get HBA channels, SCSI targets, LUNs to FC targets for given HBA.
|
|
|
|
Given an HBA and the connection properties we look for the HBA channels
|
|
and SCSI targets for each of the FC targets that this HBA has been
|
|
granted permission to connect.
|
|
|
|
For drivers that don't return an initiator to target map we try to find
|
|
the info for all the target ports.
|
|
|
|
For drivers that return an initiator_target_map we use the
|
|
initiator_target_lun_map entry that was generated by the FC connector
|
|
based on the contents of the connection information data to know which
|
|
target ports to look for.
|
|
|
|
:returns: 2-Tuple with the first entry being a list of [c, t, l]
|
|
entries where the target port was found, and the second entry of the
|
|
tuple being a set of luns for ports that were not found.
|
|
"""
|
|
# We want the targets' WWPNs, so we use the initiator_target_map if
|
|
# present for this hba or default to targets if not present.
|
|
targets = conn_props['targets']
|
|
if conn_props.get('initiator_target_map') is not None:
|
|
# This map we try to use was generated by the FC connector
|
|
targets = conn_props['initiator_target_lun_map'].get(
|
|
hba['port_name'], targets)
|
|
|
|
# Leave only the number from the host_device field (ie: host6)
|
|
host_device = hba['host_device']
|
|
if host_device and len(host_device) > 4:
|
|
host_device = host_device[4:]
|
|
|
|
path = '/sys/class/fc_transport/target%s:' % host_device
|
|
ctls = []
|
|
luns_not_found = set()
|
|
for wwpn, lun in targets:
|
|
cmd = 'grep -Gil "%(wwpns)s" %(path)s*/port_name' % {'wwpns': wwpn,
|
|
'path': path}
|
|
try:
|
|
# We need to run command in shell to expand the * glob
|
|
out, _err = self._execute(cmd, shell=True)
|
|
ctls += [line.split('/')[4].split(':')[1:] + [lun]
|
|
for line in out.split('\n') if line.startswith(path)]
|
|
except Exception as exc:
|
|
LOG.debug('Could not get HBA channel and SCSI target ID, path:'
|
|
' %(path)s*, reason: %(reason)s', {'path': path,
|
|
'reason': exc})
|
|
# If we didn't find any paths add it to the not found list
|
|
luns_not_found.add(lun)
|
|
return ctls, luns_not_found
|
|
|
|
def rescan_hosts(self, hbas, connection_properties):
|
|
LOG.debug('Rescaning HBAs %(hbas)s with connection properties '
|
|
'%(conn_props)s', {'hbas': hbas,
|
|
'conn_props': connection_properties})
|
|
# Use initiator_target_lun_map (generated from initiator_target_map by
|
|
# the FC connector) as HBA exclusion map
|
|
ports = connection_properties.get('initiator_target_lun_map')
|
|
if ports:
|
|
hbas = [hba for hba in hbas if hba['port_name'] in ports]
|
|
LOG.debug('Using initiator target map to exclude HBAs: %s',
|
|
hbas)
|
|
|
|
# Most storage arrays get their target ports automatically detected
|
|
# by the Linux FC initiator and sysfs gets populated with that
|
|
# information, but there are some that don't. We'll do a narrow scan
|
|
# using the channel, target, and LUN for the former and a wider scan
|
|
# for the latter. If all paths to a former type of array were down on
|
|
# the system boot the array could look like it's of the latter type
|
|
# and make us bring us unwanted volumes into the system by doing a
|
|
# broad scan. To prevent this from happening Cinder drivers can use
|
|
# the "enable_wildcard_scan" key in the connection_info to let us know
|
|
# they don't want us to do broad scans even in those cases.
|
|
broad_scan = connection_properties.get('enable_wildcard_scan', True)
|
|
if not broad_scan:
|
|
LOG.debug('Connection info disallows broad SCSI scanning')
|
|
|
|
process = []
|
|
skipped = []
|
|
get_ctls = self._get_hba_channel_scsi_target_lun
|
|
for hba in hbas:
|
|
ctls, luns_wildcards = get_ctls(hba, connection_properties)
|
|
# If we found the target ports, ignore HBAs that din't find them
|
|
if ctls:
|
|
process.append((hba, ctls))
|
|
|
|
# If target ports not found and should have, then the HBA is not
|
|
# connected to our storage
|
|
elif not broad_scan:
|
|
LOG.debug('Skipping HBA %s, nothing to scan, target port '
|
|
'not connected to initiator', hba['node_name'])
|
|
|
|
# If we haven't found any target ports we may need to do broad
|
|
# SCSI scans
|
|
elif not process:
|
|
skipped.append((hba,
|
|
[('-', '-', lun) for lun in luns_wildcards]))
|
|
|
|
# If we didn't find any target ports use wildcards if they are enabled
|
|
process = process or skipped
|
|
|
|
for hba, ctls in process:
|
|
for hba_channel, target_id, target_lun in ctls:
|
|
LOG.debug('Scanning %(host)s (wwnn: %(wwnn)s, c: '
|
|
'%(channel)s, t: %(target)s, l: %(lun)s)',
|
|
{'host': hba['host_device'],
|
|
'wwnn': hba['node_name'], 'channel': hba_channel,
|
|
'target': target_id, 'lun': target_lun})
|
|
self.echo_scsi_command(
|
|
"/sys/class/scsi_host/%s/scan" % hba['host_device'],
|
|
"%(c)s %(t)s %(l)s" % {'c': hba_channel,
|
|
't': target_id,
|
|
'l': target_lun})
|
|
|
|
def get_fc_hbas(self):
|
|
"""Get the Fibre Channel HBA information."""
|
|
|
|
if not self.has_fc_support():
|
|
# there is no FC support in the kernel loaded
|
|
# so there is no need to even try to run systool
|
|
LOG.debug("No Fibre Channel support detected on system.")
|
|
return []
|
|
|
|
out = None
|
|
try:
|
|
out, _err = self._execute('systool', '-c', 'fc_host', '-v',
|
|
run_as_root=True,
|
|
root_helper=self._root_helper)
|
|
except putils.ProcessExecutionError as exc:
|
|
# This handles the case where rootwrap is used
|
|
# and systool is not installed
|
|
# 96 = nova.cmd.rootwrap.RC_NOEXECFOUND:
|
|
if exc.exit_code == 96:
|
|
LOG.warning("systool is not installed")
|
|
return []
|
|
except OSError as exc:
|
|
# This handles the case where rootwrap is NOT used
|
|
# and systool is not installed
|
|
if exc.errno == errno.ENOENT:
|
|
LOG.warning("systool is not installed")
|
|
return []
|
|
|
|
# No FC HBAs were found
|
|
if out is None:
|
|
return []
|
|
|
|
lines = out.split('\n')
|
|
# ignore the first 2 lines
|
|
lines = lines[2:]
|
|
hbas = []
|
|
hba = {}
|
|
lastline = None
|
|
for line in lines:
|
|
line = line.strip()
|
|
# 2 newlines denotes a new hba port
|
|
if line == '' and lastline == '':
|
|
if len(hba) > 0:
|
|
hbas.append(hba)
|
|
hba = {}
|
|
else:
|
|
val = line.split('=')
|
|
if len(val) == 2:
|
|
key = val[0].strip().replace(" ", "")
|
|
value = val[1].strip()
|
|
hba[key] = value.replace('"', '')
|
|
lastline = line
|
|
|
|
return hbas
|
|
|
|
def get_fc_hbas_info(self):
|
|
"""Get Fibre Channel WWNs and device paths from the system, if any."""
|
|
|
|
# Note(walter-boring) modern Linux kernels contain the FC HBA's in /sys
|
|
# and are obtainable via the systool app
|
|
hbas = self.get_fc_hbas()
|
|
|
|
hbas_info = []
|
|
for hba in hbas:
|
|
wwpn = hba['port_name'].replace('0x', '')
|
|
wwnn = hba['node_name'].replace('0x', '')
|
|
device_path = hba['ClassDevicepath']
|
|
device = hba['ClassDevice']
|
|
hbas_info.append({'port_name': wwpn,
|
|
'node_name': wwnn,
|
|
'host_device': device,
|
|
'device_path': device_path})
|
|
return hbas_info
|
|
|
|
def get_fc_wwpns(self):
|
|
"""Get Fibre Channel WWPNs from the system, if any."""
|
|
|
|
# Note(walter-boring) modern Linux kernels contain the FC HBA's in /sys
|
|
# and are obtainable via the systool app
|
|
hbas = self.get_fc_hbas()
|
|
|
|
wwpns = []
|
|
for hba in hbas:
|
|
if hba['port_state'] == 'Online':
|
|
wwpn = hba['port_name'].replace('0x', '')
|
|
wwpns.append(wwpn)
|
|
|
|
return wwpns
|
|
|
|
def get_fc_wwnns(self):
|
|
"""Get Fibre Channel WWNNs from the system, if any."""
|
|
|
|
# Note(walter-boring) modern Linux kernels contain the FC HBA's in /sys
|
|
# and are obtainable via the systool app
|
|
hbas = self.get_fc_hbas()
|
|
|
|
wwnns = []
|
|
for hba in hbas:
|
|
if hba['port_state'] == 'Online':
|
|
wwnn = hba['node_name'].replace('0x', '')
|
|
wwnns.append(wwnn)
|
|
|
|
return wwnns
|
|
|
|
|
|
class LinuxFibreChannelS390X(LinuxFibreChannel):
|
|
def get_fc_hbas_info(self):
|
|
"""Get Fibre Channel WWNs and device paths from the system, if any."""
|
|
|
|
hbas = self.get_fc_hbas()
|
|
|
|
hbas_info = []
|
|
for hba in hbas:
|
|
if hba['port_state'] == 'Online':
|
|
wwpn = hba['port_name'].replace('0x', '')
|
|
wwnn = hba['node_name'].replace('0x', '')
|
|
device_path = hba['ClassDevicepath']
|
|
device = hba['ClassDevice']
|
|
hbas_info.append({'port_name': wwpn,
|
|
'node_name': wwnn,
|
|
'host_device': device,
|
|
'device_path': device_path})
|
|
return hbas_info
|
|
|
|
def configure_scsi_device(self, device_number, target_wwn, lun):
|
|
"""Write the LUN to the port's unit_add attribute.
|
|
|
|
If auto-discovery of Fibre-Channel target ports is
|
|
disabled on s390 platforms, ports need to be added to
|
|
the configuration.
|
|
If auto-discovery of LUNs is disabled on s390 platforms
|
|
luns need to be added to the configuration through the
|
|
unit_add interface
|
|
"""
|
|
LOG.debug("Configure lun for s390: device_number=%(device_num)s "
|
|
"target_wwn=%(target_wwn)s target_lun=%(target_lun)s",
|
|
{'device_num': device_number,
|
|
'target_wwn': target_wwn,
|
|
'target_lun': lun})
|
|
filepath = ("/sys/bus/ccw/drivers/zfcp/%s/%s" %
|
|
(device_number, target_wwn))
|
|
if not (os.path.exists(filepath)):
|
|
zfcp_device_command = ("/sys/bus/ccw/drivers/zfcp/%s/port_rescan" %
|
|
(device_number))
|
|
LOG.debug("port_rescan call for s390: %s", zfcp_device_command)
|
|
try:
|
|
self.echo_scsi_command(zfcp_device_command, "1")
|
|
except putils.ProcessExecutionError as exc:
|
|
LOG.warning("port_rescan call for s390 failed exit"
|
|
" %(code)s, stderr %(stderr)s",
|
|
{'code': exc.exit_code, 'stderr': exc.stderr})
|
|
|
|
zfcp_device_command = ("/sys/bus/ccw/drivers/zfcp/%s/%s/unit_add" %
|
|
(device_number, target_wwn))
|
|
LOG.debug("unit_add call for s390 execute: %s", zfcp_device_command)
|
|
try:
|
|
self.echo_scsi_command(zfcp_device_command, lun)
|
|
except putils.ProcessExecutionError as exc:
|
|
LOG.warning("unit_add call for s390 failed exit %(code)s, "
|
|
"stderr %(stderr)s",
|
|
{'code': exc.exit_code, 'stderr': exc.stderr})
|
|
|
|
def deconfigure_scsi_device(self, device_number, target_wwn, lun):
|
|
"""Write the LUN to the port's unit_remove attribute.
|
|
|
|
If auto-discovery of LUNs is disabled on s390 platforms
|
|
luns need to be removed from the configuration through the
|
|
unit_remove interface
|
|
"""
|
|
LOG.debug("Deconfigure lun for s390: "
|
|
"device_number=%(device_num)s "
|
|
"target_wwn=%(target_wwn)s target_lun=%(target_lun)s",
|
|
{'device_num': device_number,
|
|
'target_wwn': target_wwn,
|
|
'target_lun': lun})
|
|
zfcp_device_command = ("/sys/bus/ccw/drivers/zfcp/%s/%s/unit_remove" %
|
|
(device_number, target_wwn))
|
|
LOG.debug("unit_remove call for s390 execute: %s", zfcp_device_command)
|
|
try:
|
|
self.echo_scsi_command(zfcp_device_command, lun)
|
|
except putils.ProcessExecutionError as exc:
|
|
LOG.warning("unit_remove call for s390 failed exit %(code)s, "
|
|
"stderr %(stderr)s",
|
|
{'code': exc.exit_code, 'stderr': exc.stderr})
|