project-config/jenkins/scripts/common_translation_update.sh
Steve Kowalik 28eb4ce6f5 Remove support for pulling from Transifex
Switch the translation scripts to only pull from Zanata, no matter
what extra arguments they are passed on the command line. This does
not completly remove support for Transifex, which will be cleaned up
in a future commit.

Change-Id: I21bd54d4205693315da1152a310ff4faf22531a5
2015-09-16 15:53:14 +10:00

519 lines
19 KiB
Bash

#!/bin/bash -xe
# Common code used by propose_translation_update.sh and
# upstream_translation_update.sh
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
source /usr/local/jenkins/slave_scripts/common.sh
# Used for setup.py babel commands
QUIET="--quiet"
# Initial transifex setup
function setup_translation {
# Track in HAS_CONFIG whether we run "tx init" since calling it
# will add the file .tx/config - and "tx set" might update it. If
# "tx set" updates .tx/config, we need to handle the file if it
# existed before.
HAS_CONFIG=1
# Initialize the transifex client, if there's no .tx directory
if [ ! -d .tx ] ; then
tx init --host=https://www.transifex.com
HAS_CONFIG=0
fi
}
# Setup a project for transifex or Zanata
function setup_project {
local project=$1
# Transifex project name does not include "."
tx_project=${project/\./}
tx set --auto-local -r ${tx_project}.${tx_project}-translations \
"${project}/locale/<lang>/LC_MESSAGES/${project}.po" \
--source-lang en \
--source-file ${project}/locale/${project}.pot -t PO \
--execute
/usr/local/jenkins/slave_scripts/create-zanata-xml.py -p $project \
-v master --srcdir ${project}/locale --txdir ${project}/locale \
-f zanata.xml
}
# Setup project horizon for transifex
function setup_horizon {
local project=horizon
# Horizon JavaScript Translations
tx set --auto-local -r ${project}.${project}-js-translations \
"${project}/locale/<lang>/LC_MESSAGES/djangojs.po" \
--source-lang en \
--source-file ${project}/locale/djangojs.pot \
-t PO --execute
# Horizon Translations
tx set --auto-local -r ${project}.${project}-translations \
"${project}/locale/<lang>/LC_MESSAGES/django.po" \
--source-lang en \
--source-file ${project}/locale/django.pot \
-t PO --execute
# OpenStack Dashboard Translations
tx set --auto-local -r ${project}.openstack-dashboard-translations \
"openstack_dashboard/locale/<lang>/LC_MESSAGES/django.po" \
--source-lang en \
--source-file openstack_dashboard/locale/django.pot \
-t PO --execute
# OpenStack Dashboard JavaScript Translations
tx set --auto-local -r ${project}.openstack-dashboard-js-translations \
"openstack_dashboard/locale/<lang>/LC_MESSAGES/djangojs.po" \
--source-lang en \
--source-file openstack_dashboard/locale/djangojs.pot \
-t PO --execute
/usr/local/jenkins/slave_scripts/create-zanata-xml.py -p $project \
-v master --srcdir . --txdir . -r './horizon/locale/*.pot' \
'horizon/locale/{locale_with_underscore}/LC_MESSAGES/{filename}.po' \
-r './openstack_dashboard/locale/*.pot' \
'openstack_dashboard/locale/{locale_with_underscore}/LC_MESSAGES/{filename}.po' \
-e '.*/**' -f zanata.xml
}
# Set global variable DocFolder for manuals projects
function init_manuals {
project=$1
DocFolder="doc"
ZanataDocFolder="./doc"
if [ $project = "api-site" -o $project = "security-doc" ] ; then
DocFolder="./"
ZanataDocFolder="."
fi
}
# Setup project manuals projects (api-site, openstack-manuals,
# operations-guide) for transifex
function setup_manuals {
local project=$1
# Fill in associative array SPECIAL_BOOKS
declare -A SPECIAL_BOOKS
source doc-tools-check-languages.conf
# Grab all of the rules for the documents we care about
ZANATA_RULES=
# Generate pot one by one
for FILE in ${DocFolder}/*; do
# Skip non-directories
if [ ! -d $FILE ]; then
continue
fi
DOCNAME=${FILE#${DocFolder}/}
# Ignore directories that will not get translated
if [[ "$DOCNAME" =~ ^(www|tools|generated|publish-docs)$ ]]; then
continue
fi
# Skip glossary in all repos besides openstack-manuals.
if [ "$project" != "openstack-manuals" -a "$DOCNAME" == "glossary" ]; then
continue
fi
# Minimum amount of translation done, 75 % by default.
PERC=75
if [ "$project" == "openstack-manuals" ]; then
# The common and glossary directories are used by the
# other guides, let's be more liberal here since teams
# might only translate the files used by a single
# guide. We use 8 % since that downloads the currently
# translated files.
if [ "$DOCNAME" == "common" -o "$DOCNAME" == "glossary" ]; then
PERC=8
fi
fi
IS_RST=0
if [ ${SPECIAL_BOOKS["${DOCNAME}"]+_} ] ; then
case "${SPECIAL_BOOKS["${DOCNAME}"]}" in
RST)
IS_RST=1
;;
skip)
continue
;;
esac
fi
if [ ${IS_RST} -eq 1 ] ; then
tox -e generatepot-rst -- ${DOCNAME}
git add ${DocFolder}/${DOCNAME}/source/locale/${DOCNAME}.pot
# Set auto-local
tx set --auto-local -r openstack-manuals-i18n.${DOCNAME} \
"${DocFolder}/${DOCNAME}/source/locale/<lang>/LC_MESSAGES/${DOCNAME}.po" \
--source-lang en \
--source-file ${DocFolder}/${DOCNAME}/source/locale/${DOCNAME}.pot \
--minimum-perc=$PERC \
-t PO --execute
ZANATA_RULES="$ZANATA_RULES -r ${ZanataDocFolder}/${DOCNAME}/source/locale/${DOCNAME}.pot ${DocFolder}/${DOCNAME}/source/locale/{locale_with_underscore}/LC_MESSAGES/${DOCNAME}.po"
else
# Update the .pot file
./tools/generatepot ${DOCNAME}
SLUG=${DOCNAME}
if [ $SLUG = "glossary" ] ; then
# Transifex reserves glossary as SLUG, we need a different name.
SLUG="glossary-1"
fi
if [ -f ${DocFolder}/${DOCNAME}/locale/${DOCNAME}.pot ]; then
# Add all changed files to git
git add ${DocFolder}/${DOCNAME}/locale/${DOCNAME}.pot
# Set auto-local
tx set --auto-local -r openstack-manuals-i18n.${SLUG} \
"${DocFolder}/${DOCNAME}/locale/<lang>.po" --source-lang en \
--source-file ${DocFolder}/${DOCNAME}/locale/${DOCNAME}.pot \
--minimum-perc=$PERC \
-t PO --execute
ZANATA_RULES="$ZANATA_RULES -r ${ZanataDocFolder}/${DOCNAME}/locale/${DOCNAME}.pot ${DocFolder}/${DOCNAME}/locale/{locale_with_underscore}.po"
fi
fi
done
EXCLUDE='.*/**,**/source/common/**'
/usr/local/jenkins/slave_scripts/create-zanata-xml.py -p $project \
-v master --srcdir . --txdir . $ZANATA_RULES -e "$EXCLUDE" \
-f zanata.xml
}
# Setup project so that git review works, sets global variable
# COMMIT_MSG.
function setup_review {
FULL_PROJECT=$(grep project .gitreview | cut -f2 -d= |sed -e 's/\.git$//')
set +e
read -d '' COMMIT_MSG <<EOF
Imported Translations from Zanata
For more information about this automatic import see:
https://wiki.openstack.org/wiki/Translations/Infrastructure
EOF
set -e
git review -s
# See if there is an open change in the zanata/translations
# topic. If so, get the change id for the existing change for use
# in the commit msg.
change_info=$(ssh -p 29418 proposal-bot@review.openstack.org gerrit query --current-patch-set status:open project:$FULL_PROJECT topic:zanata/translations owner:proposal-bot)
previous=$(echo "$change_info" | grep "^ number:" | awk '{print $2}')
if [ -n "$previous" ]; then
change_id=$(echo "$change_info" | grep "^change" | awk '{print $2}')
# Read returns a non zero value when it reaches EOF. Because we use a
# heredoc here it will always reach EOF and return a nonzero value.
# Disable -e temporarily to get around the read.
set +e
read -d '' COMMIT_MSG <<EOF
$COMMIT_MSG
Change-Id: $change_id
EOF
set -e
fi
# If the open change an already approved, let's not queue a new
# patch but let's merge the other patch first.
# This solves the problem that when the gate pipeline backup
# reaches roughly a day, no matter how quickly you approve the new
# update it will always get sniped out of the gate by another.
# It also helps, when you approve close to the time this job is
# run.
if [ -n "$previous" ]; then
# Use the JSON format since it is very compact and easy to grep
change_info=$(ssh -p 29418 proposal-bot@review.openstack.org gerrit query --current-patch-set --format=JSON $change_id)
# Check for:
# 1) Workflow approval (+1)
# 2) no -1/-2 by Jenkins
# 3) no -2 by reviewers
# 4) no Workflow -1 (WIP)
#
if echo $change_info|grep -q '{"type":"Workflow","description":"Workflow","value":"1"' \
&& ! echo $change_info|grep -q '{"type":"Verified","description":"Verified","value":"-[12]","grantedOn":[0-9]*,"by":{"name":"Jenkins","username":"jenkins"}}' \
&& ! echo $change_info|grep -q '{"type":"Code-Review","description":"Code-Review","value":"-2"' \
&& ! echo $change_info|grep -q '{"type":"Workflow","description":"Workflow","value":"-1"' ; then
echo "Job already approved, exiting"
exit 0
fi
fi
}
# Propose patch using COMMIT_MSG
function send_patch {
# Revert any changes done to .tx/config
if [ $HAS_CONFIG -eq 1 ]; then
git reset -q .tx/config
git checkout -- .tx/config
else
rm -rf .tx
fi
# We don't have any repos storing zanata.xml, so just remove it.
rm -f zanata.xml
# Don't send a review if nothing has changed.
if [ $(git diff --cached | wc -l) -gt 0 ]; then
# Commit and review
git commit -F- <<EOF
$COMMIT_MSG
EOF
git review -t zanata/translations
fi
}
# Setup global variables LEVELS and LKEYWORDS
function setup_loglevel_vars {
# Strings for various log levels
LEVELS="info warning error critical"
# Keywords for each log level:
declare -g -A LKEYWORD
LKEYWORD['info']='_LI'
LKEYWORD['warning']='_LW'
LKEYWORD['error']='_LE'
LKEYWORD['critical']='_LC'
}
# Setup transifex configuration for log level message translation.
# Needs variables setup via setup_loglevel_vars.
function setup_loglevel_project {
project=$1
# Transifex project name does not include "."
tx_project=${project/\./}
for level in $LEVELS ; do
# Bootstrapping: Create file if it does not exist yet,
# otherwise "tx set" will fail.
if [ ! -e ${project}/locale/${project}-log-${level}.pot ]; then
touch ${project}/locale/${project}-log-${level}.pot
fi
tx set --auto-local -r ${tx_project}.${tx_project}-log-${level}-translations \
"${project}/locale/<lang>/LC_MESSAGES/${project}-log-${level}.po" \
--source-lang en \
--source-file ${project}/locale/${project}-log-${level}.pot -t PO \
--execute
done
}
# Run extract_messages for user visible messages and log messages.
# Needs variables setup via setup_loglevel_vars.
function extract_messages_log {
project=$1
# Update the .pot files
# The "_C" and "_P" prefix are for more-gettext-support blueprint,
# "_C" for message with context, "_P" for plural form message.
python setup.py $QUIET extract_messages --keyword "_C:1c,2 _P:1,2"
for level in $LEVELS ; do
python setup.py $QUIET extract_messages --no-default-keywords \
--keyword ${LKEYWORD[$level]} \
--output-file ${project}/locale/${project}-log-${level}.pot
done
}
# Setup project django_openstack_auth for transifex and Zanata
function setup_django_openstack_auth {
tx set --auto-local -r horizon.djangopo \
"openstack_auth/locale/<lang>/LC_MESSAGES/django.po" \
--source-lang en \
--source-file openstack_auth/locale/openstack_auth.pot -t PO \
--execute
/usr/local/jenkins/slave_scripts/create-zanata-xml.py \
-p django_openstack_auth -v master --srcdir openstack_auth/locale \
--txdir openstack_auth/locale -r '**/*.pot' \
'{locale_with_underscore}/LC_MESSAGES/django.po' -f zanata.xml
}
# Filter out files that we do not want to commit
function filter_commits {
# Don't add new empty files.
for f in $(git diff --cached --name-only --diff-filter=A); do
# Files should have at least one non-empty msgid string.
if ! grep -q 'msgid "[^"]' "$f" ; then
git reset -q "$f"
rm "$f"
fi
done
# Don't send files where the only things which have changed are
# the creation date, the version number, the revision date,
# name of last translator, comment lines, or diff file information.
# Also, don't send files if only .pot files would be changed.
PO_CHANGE=0
# Don't iterate over deleted files
for f in $(git diff --cached --name-only --diff-filter=AM); do
# It's ok if the grep fails
set +e
changed=$(git diff --cached "$f" \
| egrep -v "(POT-Creation-Date|Project-Id-Version|PO-Revision-Date|Last-Translator)" \
| egrep -c "^([-+][^-+#])")
added=$(git diff --cached "$f" \
| egrep -v "(POT-Creation-Date|Project-Id-Version|PO-Revision-Date|Last-Translator)" \
| egrep -c "^([+][^+#])")
set -e
if [ $changed -eq 0 ]; then
git reset -q "$f"
git checkout -- "$f"
# Check for all files endig with ".po".
# We will take this import if at least one change adds new content,
# thus adding a new translation.
# If only lines are removed, we do not need this.
elif [[ $added -gt 0 && $f =~ .po$ ]] ; then
PO_CHANGE=1
fi
done
# If no po file was changed, only pot source files were changed
# and those changes can be ignored as they give no benefit on
# their own.
if [ $PO_CHANGE -eq 0 ] ; then
# New files need to be handled differently
for f in $(git diff --cached --name-only --diff-filter=A) ; do
git reset -q -- "$f"
rm "$f"
done
for f in $(git diff --cached --name-only) ; do
git reset -q -- "$f"
git checkout -- "$f"
done
fi
}
# Check the amount of translation done for a .po file, sets global variable
# RATIO.
function check_po_file {
local file=$1
local dropped_ratio=$2
trans=$(msgfmt --statistics -o /dev/null "$file" 2>&1)
check="^0 translated messages"
if [[ $trans =~ $check ]] ; then
RATIO=0
else
if [[ $trans =~ " translated message" ]] ; then
trans_no=$(echo $trans|sed -e 's/ translated message.*$//')
else
trans_no=0
fi
if [[ $trans =~ " untranslated message" ]] ; then
untrans_no=$(echo $trans|sed -e 's/^.* \([0-9]*\) untranslated message.*/\1/')
else
untrans_no=0
fi
total=$(($trans_no+$untrans_no))
RATIO=$((100*$trans_no/$total))
fi
}
# Remove obsolete files. We might have added them in the past but
# would not add them today, so let's eventually remove them.
function cleanup_po_files {
local project=$1
for i in $(find $project/locale -name *.po) ; do
check_po_file "$i"
if [ $RATIO -lt 20 ]; then
git rm -f $i
fi
done
}
# Reduce size of po files. This reduces the amount of content imported
# and makes for fewer imports.
# This does not touch the pot files. This way we can reconstruct the po files
# using "msgmerge POTFILE POFILE -o COMPLETEPOFILE".
function compress_po_files {
local directory=$1
for i in $(find $directory -name *.po) ; do
msgattrib --translated --no-location --sort-output "$i" \
--output="${i}.tmp"
mv "${i}.tmp" "$i"
done
}
# Reduce size of po files. This reduces the amount of content imported
# and makes for fewer imports.
# This does not touch the pot files. This way we can reconstruct the po files
# using "msgmerge POTFILE POFILE -o COMPLETEPOFILE".
# Give directory name to not touch files for example under .tox.
# Pass glossary flag to not touch the glossary.
function compress_manual_po_files {
local directory=$1
local glossary=$2
for i in $(find $directory -name *.po) ; do
if [ "$glossary" -eq "0" ] ; then
if [[ $i =~ "/glossary/" ]] ; then
continue
fi
fi
msgattrib --translated --no-location --sort-output "$i" \
--output="${i}.tmp"
mv "${i}.tmp" "$i"
done
}
function pull_from_zanata {
# Since Zanata does not currently have an option to not download new
# files, we download everything, and then remove new files that are not
# translated enough.
zanata-cli -B -e pull
for i in $(find . -name '*.po' ! -path './.*' -prune | cut -b3-); do
check_po_file "$i"
if [ $RATIO -lt 75 ]; then
# This means the file is below the ratio, but we only want to
# delete it if is a new file. Files known to git that drop below
# 20% will be cleaned up by cleanup_po_files.
if ! git ls-files | grep -xq "$i"; then
rm -f "$i"
fi
fi
done
}
function pull_from_zanata_manuals {
local project=$1
# Since Zanata does not currently have an option to not download new
# files, we download everything, and then remove new files that are not
# translated enough.
zanata-cli -B -e pull
for i in $(find . -name '*.po' ! -path './.*' -prune | cut -b3-); do
# We want new files to be >75% translated. The glossary and common
# documents in openstack-manuals have that relaxed to >8%.
percentage=75
if [ $project = "openstack-manuals" ]; then
case "$i" in
*glossary*|*common*)
percentage=8
;;
esac
fi
check_po_file "$i"
if git ls-files | grep -xq "$i"; then
# Existing file, we only want to update it if it's >50% translated.
if [ $RATIO -lt 50 ]; then
git checkout "$i"
fi
else
if [ $RATIO -lt $percentage ]; then
rm -f "$i"
fi
fi
done
}