OpenStack Horizon Puppet Module
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

1022 lines
35 KiB

import os
from django.utils.translation import ugettext_lazy as _
from horizon.utils import secret_key
from openstack_dashboard import exceptions
from openstack_dashboard.settings import HORIZON_CONFIG
DEBUG = <%= @django_debug.to_s.capitalize %>
<% if @site_branding %>
SITE_BRANDING = '<%= @site_branding %>'
<% end %>
# WEBROOT is the location relative to Webserver root
# should end with a slash.
#LOGIN_URL = WEBROOT + 'auth/login/'
#LOGOUT_URL = WEBROOT + 'auth/logout/'
<% if @root_url == '/' %>
WEBROOT = '/'
LOGIN_URL = '/auth/login/'
LOGOUT_URL = '/auth/logout/'
<% else %>
WEBROOT = '<%= @root_url %>/'
LOGIN_URL = '<%= @root_url %>/auth/login/'
LOGOUT_URL = '<%= @root_url %>/auth/logout/'
<% end %>
# LOGIN_REDIRECT_URL can be used as an alternative for
# HORIZON_CONFIG.user_home, if user_home is not set.
# Do not set it to '/home/', as this will cause circular redirect loop
#LOGIN_REDIRECT_URL = WEBROOT
<% if @root_url == '/' %>
LOGIN_REDIRECT_URL = '/'
<% else %>
LOGIN_REDIRECT_URL = '<%= @root_url %>/'
<% end %>
# Required for Django 1.5.
# If horizon is running in production (DEBUG is False), set this
# with the list of host/domain names that the application can serve.
# For more information see:
# https://docs.djangoproject.com/en/dev/ref/settings/#allowed-hosts
#ALLOWED_HOSTS = ['horizon.example.com', ]
<% if @allowed_hosts.kind_of?(Array) %>
ALLOWED_HOSTS = ['<%= @allowed_hosts.join("', '") %>', ]
<% else %>
ALLOWED_HOSTS = ['<%= @allowed_hosts %>', ]
<% end %>
# Set SSL proxy settings:
# Pass this header from the proxy after terminating the SSL,
# and don't forget to strip it from the client's request.
# For more information see:
# https://docs.djangoproject.com/en/1.8/ref/settings/#secure-proxy-ssl-header
<% if @enable_secure_proxy_ssl_header %>
SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https')
<% else %>
#SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https')
<% end %>
# This setting specifies the name of the header with remote IP address
#SECURE_PROXY_ADDR_HEADER = False
<% if @secure_proxy_addr_header %>
SECURE_PROXY_ADDR_HEADER = '<%= @secure_proxy_addr_header %>'
<% end %>
# If Horizon is being served through SSL, then uncomment the following two
# settings to better secure the cookies from security exploits
<% if @secure_cookies %>
CSRF_COOKIE_SECURE = True
SESSION_COOKIE_SECURE = True
SESSION_COOKIE_HTTPONLY = True
<% else %>
#CSRF_COOKIE_SECURE = True
#SESSION_COOKIE_SECURE = True
#SESSION_COOKIE_HTTPONLY = True
<% end %>
# Overrides for OpenStack API versions. Use this setting to force the
# OpenStack dashboard to use a specific API version for a given service API.
# Versions specified here should be integers or floats, not strings.
# NOTE: The version should be formatted as it appears in the URL for the
# service API. For example, The identity service APIs have inconsistent
# use of the decimal point, so valid options would be 2.0 or 3.
#OPENSTACK_API_VERSIONS = {
# "data-processing": 1.1,
# "identity": 3,
# "volume": 2,
# "compute": 2
#}
<% if ! (@api_versions.empty?) and @api_versions.kind_of?(Hash) %>
OPENSTACK_API_VERSIONS = {
<% @api_versions.sort.each do |opt_name,opt_val| -%>
'<%= opt_name -%>': <%= opt_val -%>,
<%end %>
}
<%end %>
# Set this to True if running on multi-domain model. When this is enabled, it
# will require user to enter the Domain name in addition to username for login.
#OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = False
<% if @keystone_multidomain_support %>
OPENSTACK_KEYSTONE_MULTIDOMAIN_SUPPORT = True
<% end %>
<% if @keystone_domain_choices.kind_of?(Array) %>
OPENSTACK_KEYSTONE_DOMAIN_DROPDOWN = True
OPENSTACK_KEYSTONE_DOMAIN_CHOICES = (
<% @keystone_domain_choices.each do |d| -%>
('<%= d['name'] -%>', '<%= d['display'] -%>'),
<% end -%>
)
<% end -%>
# Overrides the default domain used when running on single-domain model
# with Keystone V3. All entities will be created in the default domain.
#OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = 'Default'
<% if @keystone_default_domain %>
OPENSTACK_KEYSTONE_DEFAULT_DOMAIN = '<%= @keystone_default_domain %>'
<% end %>
# Set Console type:
# valid options are "AUTO"(default), "VNC", "SPICE", "RDP", "SERIAL" or None
# Set to None explicitly if you want to deactivate the console.
#CONSOLE_TYPE = "AUTO"
# Default OpenStack Dashboard configuration.
HORIZON_CONFIG = {
'default_dashboard': 'project',
'user_home': 'openstack_dashboard.views.get_user_home',
'ajax_queue_limit': 10,
'auto_fade_alerts': {
'delay': 3000,
'fade_duration': 1500,
'types': ['alert-success', 'alert-info']
},
'help_url': "<%= @help_url %>",
'exceptions': {'recoverable': exceptions.RECOVERABLE,
'not_found': exceptions.NOT_FOUND,
'unauthorized': exceptions.UNAUTHORIZED},
<% if @customization_module and ! (@customization_module.empty?) -%>
'customization_module': '<%= @customization_module -%>',
<% end -%>
}
# If provided, a "Report Bug" link will be displayed in the site header
# which links to the value of this setting (ideally a URL containing
# information on how to report issues).
#HORIZON_CONFIG["bug_url"] = "http://bug-report.example.com"
# Show backdrop element outside the modal, do not close the modal
# after clicking on backdrop.
#HORIZON_CONFIG["modal_backdrop"] = "static"
# Specify a regular expression to validate user passwords.
#HORIZON_CONFIG["password_validator"] = {
# "regex": '.*',
# "help_text": _("Your password does not meet the requirements."),
#}
<%if @password_validator %>
HORIZON_CONFIG["password_validator"] = {
"regex": '<%= @password_validator %>',
<%- if @password_validator_help -%>
"help_text": _("<%= @password_validator_help -%>"),
<%- else -%>
"help_text": _("Your password does not meet the requirements."),
<%- end -%>
}
<% end %>
# Turn off browser autocompletion for forms including the login form and
# the database creation workflow if so desired.
#HORIZON_CONFIG["password_autocomplete"] = "off"
HORIZON_CONFIG["password_autocomplete"] = "<%= @password_autocomplete %>"
# Setting this to True will disable the reveal button for password fields,
# including on the login form.
#HORIZON_CONFIG["disable_password_reveal"] = False
<% if @disable_password_reveal == true %>
HORIZON_CONFIG["disable_password_reveal"] = True
<% end %>
# Set this to True to display an 'Admin Password' field on the Change Password
# form to verify that it is indeed the admin logged-in who wants to change the
# password
#HORIZON_CONFIG["enforce_password_check"] = False
<% if @enforce_password_check == true %>
HORIZON_CONFIG["enforce_password_check"] = True
<% end %>
# Configure enabled image panel. It can be legacy or angular.
#HORIZON_CONFIG["images_panel"] = "legacy"
HORIZON_CONFIG["images_panel"] = "<%= @images_panel %>"
LOCAL_PATH = os.path.dirname(os.path.abspath(__file__))
# Set custom secret key:
# You can either set it to a specific value or you can let horizon generate a
# default secret key that is unique on this machine, e.i. regardless of the
# amount of Python WSGI workers (if used behind Apache+mod_wsgi): However,
# there may be situations where you would want to set this explicitly, e.g.
# when multiple dashboard instances are distributed on different machines
# (usually behind a load-balancer). Either you have to make sure that a session
# gets all requests routed to the same dashboard instance or you set the same
# SECRET_KEY for all of them.
#SECRET_KEY = secret_key.generate_or_read_from_file(
# os.path.join(LOCAL_PATH, '.secret_key_store'))
SECRET_KEY = '<%= @secret_key %>'
# We recommend you use memcached for development; otherwise after every reload
# of the django development server, you will have to login again. To use
# memcached set CACHES to something like
#CACHES = {
# 'default': {
# 'BACKEND': 'django.core.cache.backends.memcached.MemcachedCache',
# 'LOCATION': '127.0.0.1:11211',
# }
#}
#
#CACHES = {
# 'default': {
# 'BACKEND': 'django.core.cache.backends.locmem.LocMemCache',
# }
#}
CACHES = {
'default': {
<% if @cache_options.kind_of?(Hash) %>
'OPTIONS': {
<% @cache_options.sort.each do |opt_name,opt_val| -%>
'<%= opt_name -%>': <%= opt_val -%>,
<% end -%>},
<% end -%>
'BACKEND': '<%= @cache_backend %>',
<% if @cache_server_ip %>
<% if @cache_server_ip_real.kind_of?(Array) %>
<% split = ":" + @cache_server_port + "','" %>
'LOCATION': [ <% @cache_server_ip_real.each do |ip| -%>'<%= ip -%>:<%= @cache_server_port -%>',<% end -%> ],
<% else %>
'LOCATION': '<%= @cache_server_ip_real %>:<%= @cache_server_port %>',
<% end %>
<% end %>
<% if @cache_server_url %>
'LOCATION': '<%= @cache_server_url %>',
<% end %>
}
}
<% if @cache_tls_enabled %>
## START TLS context configuration
import ssl
tls_context = ssl.create_default_context(<% if @cache_tls_cafile %>cafile='<%= @cache_tls_cafile %>'<% end %>)
<% if @cache_tls_certfile and @cache_tls_keyfile %>
tls_context.load_cert_chain('<%= @cache_tls_certfile %>', '<%= @cache_tls_keyfile %>')
<% end %>
<% if @cache_tls_certfile and not @cache_tls_keyfile %>
tls_context.load_cert_chain('<%= @cache_tls_certfile %>')
<% end %>
<% if @cache_allowed_ciphers %>
tls_context.set_ciphers('<%= @cache_tls_allowed_ciphers %>')
<% end %>
CACHES['default'].setdefault('OPTIONS', {})['tls_context'] = tls_context
## END TLS context configuration
<% end %>
<% if @django_session_engine %>
SESSION_ENGINE = "<%= @django_session_engine %>"
<% end %>
# Send email to the console by default
EMAIL_BACKEND = 'django.core.mail.backends.console.EmailBackend'
# Or send them to /dev/null
#EMAIL_BACKEND = 'django.core.mail.backends.dummy.EmailBackend'
# Configure these for your outgoing email host
#EMAIL_HOST = 'smtp.my-company.com'
#EMAIL_PORT = 25
#EMAIL_HOST_USER = 'djangomail'
#EMAIL_HOST_PASSWORD = 'top-secret!'
# For multiple regions uncomment this configuration, and add (endpoint, title).
#AVAILABLE_REGIONS = [
# ('http://cluster1.example.com:5000/v3', 'cluster1'),
# ('http://cluster2.example.com:5000/v3', 'cluster2'),
#]
<% if @available_regions.kind_of?(Array) %>
AVAILABLE_REGIONS = [
<% @available_regions.each do |r| -%>
('<%= r[0] -%>', '<%= r[1] -%>'),
<% end -%>
]
<% end -%>
#OPENSTACK_HOST = "127.0.0.1"
#OPENSTACK_KEYSTONE_URL = "http://%s:5000/v3" % OPENSTACK_HOST
#OPENSTACK_KEYSTONE_DEFAULT_ROLE = "member"
OPENSTACK_KEYSTONE_URL = "<%= @keystone_url %>"
OPENSTACK_KEYSTONE_DEFAULT_ROLE = "<%= @keystone_default_role %>"
# Enables keystone web single-sign-on if set to True.
#WEBSSO_ENABLED = False
# Determines which authentication choice to show as default.
#WEBSSO_INITIAL_CHOICE = "credentials"
# The list of authentication mechanisms which include keystone
# federation protocols and identity provider/federation protocol
# mapping keys (WEBSSO_IDP_MAPPING). Current supported protocol
# IDs are 'saml2' and 'oidc' which represent SAML 2.0, OpenID
# Connect respectively.
# Do not remove the mandatory credentials mechanism.
# Note: The last two tuples are sample mapping keys to a identity provider
# and federation protocol combination (WEBSSO_IDP_MAPPING).
#WEBSSO_CHOICES = (
# ("credentials", _("Keystone Credentials")),
# ("oidc", _("OpenID Connect")),
# ("saml2", _("Security Assertion Markup Language")),
# ("acme_oidc", "ACME - OpenID Connect"),
# ("acme_saml2", "ACME - SAML2")
#)
# A dictionary of specific identity provider and federation protocol
# combinations. From the selected authentication mechanism, the value
# will be looked up as keys in the dictionary. If a match is found,
# it will redirect the user to a identity provider and federation protocol
# specific WebSSO endpoint in keystone, otherwise it will use the value
# as the protocol_id when redirecting to the WebSSO by protocol endpoint.
# NOTE: The value is expected to be a tuple formatted as: (<idp_id>, <protocol_id>).
#WEBSSO_IDP_MAPPING = {
# "acme_oidc": ("acme", "oidc"),
# "acme_saml2": ("acme", "saml2")
#}
<% if @websso_enabled -%>
WEBSSO_ENABLED = True
<% end -%>
<% if @websso_initial_choice -%>
WEBSSO_INITIAL_CHOICE = "<%= @websso_initial_choice %>"
<% end -%>
<% if @websso_choices.kind_of?(Array) %>
WEBSSO_CHOICES = (
("credentials", _("Keystone Credentials")),
<% @websso_choices.each do |r| -%>
("<%= r[0] -%>", _("<%= r[1] -%>")),
<% end -%>
)
<% end -%>
<% if @websso_idp_mapping.kind_of?(Hash) %>
WEBSSO_IDP_MAPPING = {
<% @websso_idp_mapping.each do |key,r| -%>
"<%= key -%>": ("<%= r[0] -%>", "<%= r[1] -%>"),
<% end -%>
}
<% end -%>
# Enables redirection on login to the identity provider defined on
# WEBSSO_DEFAULT_REDIRECT_PROTOCOL and WEBSSO_DEFAULT_REDIRECT_REGION
#WEBSSO_DEFAULT_REDIRECT = False
<% if @websso_default_redirect -%>
WEBSSO_DEFAULT_REDIRECT = True
<% end -%>
# Specifies the protocol to use for default redirection on login
#WEBSSO_DEFAULT_REDIRECT_PROTOCOL = None
<% if @websso_default_redirect_protocol -%>
WEBSSO_DEFAULT_REDIRECT_PROTOCOL = "<%= @websso_default_redirect_protocol %>"
<% end -%>
# Specifies the region to which the connection will be established on login
#WEBSSO_DEFAULT_REDIRECT_REGION = OPENSTACK_KEYSTONE_URL
<% if @websso_default_redirect_region -%>
WEBSSO_DEFAULT_REDIRECT_REGION = "<%= @websso_default_redirect_region %>"
<% end -%>
# Enables redirection on logout to the method specified on the identity
# provider. Once logout the client will be redirected to the address specified
# in this variable.
#WEBSSO_DEFAULT_REDIRECT_LOGOUT = None
<% if @websso_default_redirect_logout -%>
WEBSSO_DEFAULT_REDIRECT_LOGOUT = "<%= @websso_default_redirect_logout %>"
<% end -%>
# Disable SSL certificate checks (useful for self-signed certificates):
#OPENSTACK_SSL_NO_VERIFY = True
<% if @ssl_no_verify %>
OPENSTACK_SSL_NO_VERIFY = True
<% end -%>
# The CA certificate to use to verify SSL connections
<% if @openstack_ssl_cacert == '' -%>
#OPENSTACK_SSL_CACERT = '/path/to/cacert.pem'
<% else -%>
OPENSTACK_SSL_CACERT = '<%= @openstack_ssl_cacert %>'
<% end -%>
# The OPENSTACK_KEYSTONE_BACKEND settings can be used to identify the
# capabilities of the auth backend for Keystone.
# If Keystone has been configured to use LDAP as the auth backend then set
# can_edit_user to False and name to 'ldap'.
#
# TODO(tres): Remove these once Keystone has an API to identify auth backend.
<% if @keystone_options_real.kind_of?(Hash) %>
OPENSTACK_KEYSTONE_BACKEND = {
<% @keystone_options_real.sort.each do |opt_name,opt_val| -%>
<%- if opt_val == true or opt_val == false -%>
'<%= opt_name -%>': <%= opt_val.to_s.capitalize -%>,
<%- elsif opt_val == 'None' -%>
'<%= opt_name -%>': None,
<%- else -%>
'<%= opt_name -%>': '<%= opt_val -%>',
<%-end-%>
<% end -%>
}
<% end -%>
# Setting this to True, will add a new "Retrieve Password" action on instance,
# allowing Admin session password retrieval/decryption.
#OPENSTACK_ENABLE_PASSWORD_RETRIEVE = False
<% if @password_retrieve -%>
OPENSTACK_ENABLE_PASSWORD_RETRIEVE = True
<% end -%>
# The Launch Instance user experience has been significantly enhanced.
# You can choose whether to enable the new launch instance experience,
# the legacy experience, or both. The legacy experience will be removed
# in a future release, but is available as a temporary backup setting to ensure
# compatibility with existing deployments. Further development will not be
# done on the legacy experience. Please report any problems with the new
# experience via the Launchpad tracking system.
#
# Toggle LAUNCH_INSTANCE_LEGACY_ENABLED and LAUNCH_INSTANCE_NG_ENABLED to
# determine the experience to enable. Set them both to true to enable
# both.
#LAUNCH_INSTANCE_LEGACY_ENABLED = True
#LAUNCH_INSTANCE_NG_ENABLED = False
# The Xen Hypervisor has the ability to set the mount point for volumes
# attached to instances (other Hypervisors currently do not). Setting
# can_set_mount_point to True will add the option to set the mount point
# from the UI.
#OPENSTACK_HYPERVISOR_FEATURES = {
# 'can_set_mount_point': False,
# 'can_set_password': False,
# 'requires_keypair': False,
#}
# The OPENSTACK_HYPERVISOR_FEATURES settings can be used to enable optional
# services provided by hypervisors.
<%- if ! (@hypervisor_options_real.empty?) -%>
OPENSTACK_HYPERVISOR_FEATURES = {
<%- @hypervisor_options_real.sort.each do |opt_name,opt_val| -%>
'<%= opt_name -%>': <%= opt_val.to_s.capitalize -%>,
<%-end-%>
}
<%-end-%>
# The OPENSTACK_CINDER_FEATURES settings can be used to enable optional
# services provided by cinder that is not exposed by its extension API.
#OPENSTACK_CINDER_FEATURES = {
# 'enable_backup': False,
#}
<%- if ! (@cinder_options_real.empty?) -%>
OPENSTACK_CINDER_FEATURES = {
<%- @cinder_options_real.sort.each do |opt_name,opt_val| -%>
'<%= opt_name -%>': <%= opt_val.to_s.capitalize -%>,
<%-end-%>
}
<%-end-%>
<%- if ! (@instance_options_real.empty?) -%>
LAUNCH_INSTANCE_DEFAULTS = {
<%- @instance_options_real.sort.each do |opt_name,opt_val| -%>
'<%= opt_name -%>': <%= opt_val.to_s.capitalize -%>,
<%-end-%>
}
<%-end-%>
# The OPENSTACK_NEUTRON_NETWORK settings can be used to enable optional
# services provided by neutron. Options currently available are load
# balancer service, security groups, quotas, VPN service.
#OPENSTACK_NEUTRON_NETWORK = {
# 'enable_router': True,
# 'enable_quotas': True,
# 'enable_ipv6': True,
# 'enable_distributed_router': False,
# 'enable_ha_router': False,
# 'enable_fip_topology_check': True,
# Neutron can be configured with a default Subnet Pool to be used for IPv4
# subnet-allocation. Specify the label you wish to display in the Address
# pool selector on the create subnet step if you want to use this feature.
#'default_ipv4_subnet_pool_label': None,
# Neutron can be configured with a default Subnet Pool to be used for IPv6
# subnet-allocation. Specify the label you wish to display in the Address
# pool selector on the create subnet step if you want to use this feature.
# You must set this to enable IPv6 Prefix Delegation in a PD-capable
# environment.
#'default_ipv6_subnet_pool_label': None,
# Set which provider network types are supported. Only the network types
# in this list will be available to choose from when creating a network.
# Network types include local, flat, vlan, gre, and vxlan.
#'supported_provider_types': ['*'],
# Set which VNIC types are supported for port binding. Only the VNIC
# types in this list will be available to choose from when creating a
# port.
# VNIC types include 'normal', 'macvtap' and 'direct'.
# Set to empty list or None to disable VNIC type selection.
#'supported_vnic_types': ['*']
#}
<%- if ! (@neutron_options_real.empty?) -%>
OPENSTACK_NEUTRON_NETWORK = {
<%- @neutron_options_real.sort.each do |opt_name,opt_val| -%>
<%- if opt_val == true or opt_val == false -%>
'<%= opt_name -%>': <%= opt_val.to_s.capitalize -%>,
<%- elsif opt_val == 'None' -%>
'<%= opt_name -%>': None,
<%- elsif opt_val.kind_of?(Array) -%>
'<%= opt_name -%>': ['<%= opt_val.join("', '") %>'],
<%- else -%>
'<%= opt_name -%>': '<%= opt_val -%>',
<%-end-%>
<%-end-%>
}
<%-end-%>
# The OPENSTACK_IMAGE_BACKEND settings can be used to customize features
# in the OpenStack Dashboard related to the Image service, such as the list
# of supported image formats.
#OPENSTACK_IMAGE_BACKEND = {
# 'image_formats': [
# ('', _('Select format')),
# ('aki', _('AKI - Amazon Kernel Image')),
# ('ami', _('AMI - Amazon Machine Image')),
# ('ari', _('ARI - Amazon Ramdisk Image')),
# ('docker', _('Docker')),
# ('iso', _('ISO - Optical Disk Image')),
# ('ova', _('OVA - Open Virtual Appliance')),
# ('qcow2', _('QCOW2 - QEMU Emulator')),
# ('raw', _('Raw')),
# ('vdi', _('VDI - Virtual Disk Image')),
# ('vhd', ('VHD - Virtual Hard Disk')),
# ('vmdk', _('VMDK - Virtual Machine Disk')),
# ]
#}
<%- if !(@image_backend.empty?) -%>
OPENSTACK_IMAGE_BACKEND = {
<%- @image_backend.each do |opt_name,opt_val| -%>
'<%= opt_name %>': [
<%- opt_val.each do |val,label| -%>
('<%= val %>', _('<%= label %>')),
<%- end -%>
], # <%= opt_name %>
<%- end -%>
} # OPENSTACK_IMAGE_BACKEND
<%- end -%>
# The IMAGE_CUSTOM_PROPERTY_TITLES settings is used to customize the titles for
# image custom property attributes that appear on image detail pages.
#IMAGE_CUSTOM_PROPERTY_TITLES = {
# "architecture": _("Architecture"),
# "kernel_id": _("Kernel ID"),
# "ramdisk_id": _("Ramdisk ID"),
# "image_state": _("Euca2ools state"),
# "project_id": _("Project ID"),
# "image_type": _("Image Type"),
#}
# The IMAGE_RESERVED_CUSTOM_PROPERTIES setting is used to specify which image
# custom properties should not be displayed in the Image Custom Properties
# table.
#IMAGE_RESERVED_CUSTOM_PROPERTIES = []
# A dictionary of default settings for create image modal.
#CREATE_IMAGE_DEFAULTS = {
# 'image_visibility': "public",
#}
<% if @create_image_defaults %>
CREATE_IMAGE_DEFAULTS = {
<%- @create_image_defaults.sort.each do |opt_name,opt_val| -%>
'<%= opt_name %>': '<%= opt_val %>',
<%- end -%>
}
<% end %>
# OPENSTACK_ENDPOINT_TYPE specifies the endpoint type to use for the endpoints
# in the Keystone service catalog. Use this setting when Horizon is running
# external to the OpenStack environment. The default is 'publicURL'.
#OPENSTACK_ENDPOINT_TYPE = "publicURL"
<% if @openstack_endpoint_type %>
OPENSTACK_ENDPOINT_TYPE = "<%= @openstack_endpoint_type %>"
<% end %>
# SECONDARY_ENDPOINT_TYPE specifies the fallback endpoint type to use in the
# case that OPENSTACK_ENDPOINT_TYPE is not present in the endpoints
# in the Keystone service catalog. Use this setting when Horizon is running
# external to the OpenStack environment. The default is None. This
# value should differ from OPENSTACK_ENDPOINT_TYPE if used.
#SECONDARY_ENDPOINT_TYPE = "publicURL"
<% if @secondary_endpoint_type %>
SECONDARY_ENDPOINT_TYPE = "<%= @secondary_endpoint_type %>"
<% end %>
# The number of objects (Swift containers/objects or images) to display
# on a single page before providing a paging element (a "more" link)
# to paginate results.
#API_RESULT_LIMIT = 1000
#API_RESULT_PAGE_SIZE = 20$
API_RESULT_LIMIT = <%= @api_result_limit %>
API_RESULT_PAGE_SIZE = 20
# The size of chunk in bytes for downloading objects from Swift
#SWIFT_FILE_TRANSFER_CHUNK_SIZE = 512 * 1024
# Specify a maximum number of items to display in a dropdown.
DROPDOWN_MAX_ITEMS = <%= @dropdown_max_items %>
# The timezone of the server. This should correspond with the timezone
# of your entire OpenStack installation, and hopefully be in UTC.
TIME_ZONE = "<%= @timezone %>"
# If you have external monitoring links, eg:
<% if @horizon_app_links %>
EXTERNAL_MONITORING = <%= @horizon_app_links %>
<% end %>
# When launching an instance, the menu of available flavors is
# sorted by RAM usage, ascending. If you would like a different sort order,
# you can provide another flavor attribute as sorting key. Alternatively, you
# can provide a custom callback method to use for sorting. You can also provide
# a flag for reverse sort. For more info, see
# http://docs.python.org/2/library/functions.html#sorted
#CREATE_INSTANCE_FLAVOR_SORT = {
# 'key': 'name',
# # or
# 'key': my_awesome_callback_method,
# 'reverse': False,
#}
<% if @available_themes.kind_of?(Array) %>
AVAILABLE_THEMES = [
<% @available_themes.each do |theme| %>
('<%= theme['name'] %>', '<%= theme['label'] %>', '<%= theme['path'] %>'),
<% end %>
]
<% end %>
<% if @default_theme %>
DEFAULT_THEME = '<%= @default_theme %>'
<% end %>
# Modules that provide /auth routes that can be used to handle different types
# of user authentication. Add auth plugins that require extra route handling to
# this list.
#AUTHENTICATION_URLS = [
# 'openstack_auth.urls',
#]
# The Horizon Policy Enforcement engine uses these values to load per service
# policy rule files. The content of these files should match the files the
# OpenStack services are using to determine role based access control in the
# target installation.
# Path to directory containing policy.json files
#POLICY_FILES_PATH = os.path.join(ROOT_PATH, "conf")
<% if !(@policy_files_path.nil?) %>
POLICY_FILES_PATH = '<%= @policy_files_path %>'
<% elsif @osfamily == 'RedHat' %>
POLICY_FILES_PATH = '/etc/openstack-dashboard'
<% else %>
#POLICY_FILES_PATH = os.path.join(ROOT_PATH, "conf")
<% end -%>
# Map of local copy of service policy files.
# Please insure that your identity policy file matches the one being used on
# your keystone servers. There is an alternate policy file that may be used
# in the Keystone v3 multi-domain case, policy.v3cloudsample.json.
# This file is not included in the Horizon repository by default but can be
# found at
# https://opendev.org/openstack/keystone/src/branch/master/etc/ \
# policy.v3cloudsample.json
# Having matching policy files on the Horizon and Keystone servers is essential
# for normal operation. This holds true for all services and their policy files.
#POLICY_FILES = {
# 'identity': 'keystone_policy.yaml',
# 'compute': 'nova_policy.yaml',
# 'volume': 'cinder_policy.yaml',
# 'image': 'glance_policy.yaml',
# 'network': 'neutron_policy.yaml',
#}
<% if @policy_files.kind_of?(Hash) %>
POLICY_FILES = {
<% @policy_files.sort.each do |service_name,filename| -%>
'<%= service_name -%>': '<%= filename -%>',
<% end -%>
} # POLICY_FILES
<% end -%>
# Services for which horizon has extra policies are defined
# in POLICY_DIRS by default.
#POLICY_DIRS = {
# 'compute': ['nova_policy.d'],
# 'volume': ['cinder_policy.d'],
#}
#DEFAULT_POLICY_FILES = {
# 'identity': 'default_policies/keystone.yaml',
# 'compute': 'default_policies/nova.yaml',
# 'volume': 'default_policies/cinder.yaml',
# 'image': 'default_policies/glance.yaml',
# 'network': 'default_policies/neutron.yaml',
#}
# Change this patch to the appropriate static directory containing
# two files: _variables.scss and _styles.scss
#CUSTOM_THEME_PATH = 'themes/default'
LOGGING = {
'version': 1,
# When set to True this will disable all logging except
# for loggers specified in this configuration dictionary. Note that
# if nothing is specified here and disable_existing_loggers is True,
# django.db.backends will still log unless it is disabled explicitly.
'disable_existing_loggers': False,
'formatters': {
'verbose': {
'format': '%(asctime)s %(process)d %(levelname)s %(name)s '
'%(message)s'
},
'normal': {
'format': 'dashboard-%(name)s: %(levelname)s %(message)s'
},
},
'handlers': {
'null': {
'level': 'DEBUG',
'class': 'logging.NullHandler',
},
'console': {
# Set the level to "DEBUG" for verbose output logging.
'level': '<%= @log_level %>',
'class': 'logging.StreamHandler',
},
'file': {
'level': '<%= @log_level %>',
'class': 'logging.FileHandler',
'filename': '<%= scope.lookupvar("horizon::params::logdir") %>/horizon.log',
'formatter': 'verbose',
},
<%- if @log_handlers.include?('syslog') -%>
'syslog': {
'level': '<%= @log_level %>',
'facility': 'local1',
'class': 'logging.handlers.SysLogHandler',
'address': '/dev/log',
'formatter': 'normal',
}
<%- end -%>
},
'loggers': {
# Logging from django.db.backends is VERY verbose, send to null
# by default.
'django.db.backends': {
'handlers': ['null'],
'propagate': False,
},
'requests': {
'handlers': ['null'],
'propagate': False,
},
'horizon': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'openstack_dashboard': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'novaclient': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'cinderclient': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'keystoneclient': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'glanceclient': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'neutronclient': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'swiftclient': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'openstack_auth': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'nose.plugins.manager': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
'django': {
# 'handlers': ['console'],
'handlers': ['<%= @log_handlers.join("', '") %>'],
# 'level': 'DEBUG',
'level': '<%= @log_level %>',
'propagate': False,
},
}
}
# 'direction' should not be specified for all_tcp/udp/icmp.
# It is specified in the form.
SECURITY_GROUP_RULES = {
'all_tcp': {
'name': 'ALL TCP',
'ip_protocol': 'tcp',
'from_port': '1',
'to_port': '65535',
},
'all_udp': {
'name': 'ALL UDP',
'ip_protocol': 'udp',
'from_port': '1',
'to_port': '65535',
},
'all_icmp': {
'name': 'ALL ICMP',
'ip_protocol': 'icmp',
'from_port': '-1',
'to_port': '-1',
},
'ssh': {
'name': 'SSH',
'ip_protocol': 'tcp',
'from_port': '22',
'to_port': '22',
},
'smtp': {
'name': 'SMTP',
'ip_protocol': 'tcp',
'from_port': '25',
'to_port': '25',
},
'dns': {
'name': 'DNS',
'ip_protocol': 'tcp',
'from_port': '53',
'to_port': '53',
},
'http': {
'name': 'HTTP',
'ip_protocol': 'tcp',
'from_port': '80',
'to_port': '80',
},
'pop3': {
'name': 'POP3',
'ip_protocol': 'tcp',
'from_port': '110',
'to_port': '110',
},
'imap': {
'name': 'IMAP',
'ip_protocol': 'tcp',
'from_port': '143',
'to_port': '143',
},
'ldap': {
'name': 'LDAP',
'ip_protocol': 'tcp',
'from_port': '389',
'to_port': '389',
},
'https': {
'name': 'HTTPS',
'ip_protocol': 'tcp',
'from_port': '443',
'to_port': '443',
},
'smtps': {
'name': 'SMTPS',
'ip_protocol': 'tcp',
'from_port': '465',
'to_port': '465',
},
'imaps': {
'name': 'IMAPS',
'ip_protocol': 'tcp',
'from_port': '993',
'to_port': '993',
},
'pop3s': {
'name': 'POP3S',
'ip_protocol': 'tcp',
'from_port': '995',
'to_port': '995',
},
'ms_sql': {
'name': 'MS SQL',
'ip_protocol': 'tcp',
'from_port': '1433',
'to_port': '1433',
},
'mysql': {
'name': 'MYSQL',
'ip_protocol': 'tcp',
'from_port': '3306',
'to_port': '3306',
},
'rdp': {
'name': 'RDP',
'ip_protocol': 'tcp',
'from_port': '3389',
'to_port': '3389',
},
}
SESSION_TIMEOUT = <%= @session_timeout %>
# The Ubuntu package includes pre-compressed JS and compiled CSS to allow
# offline compression by default. To enable online compression, install
# the python-lesscpy package and disable the following option.
COMPRESS_OFFLINE = <%= @compress_offline.to_s.capitalize %>
# For Glance image upload, Horizon uses the file upload support from Django
# so we add this option to change the directory where uploaded files are temporarily
# stored until they are loaded into Glance.
FILE_UPLOAD_TEMP_DIR = '<%= @file_upload_temp_dir %>'
# The default date range in the Overview panel meters - either <today> minus N
# days (if the value is integer N), or from the beginning of the current month
# until today (if set to None). This setting should be used to limit the amount
# of data fetched by default when rendering the Overview panel.
# OVERVIEW_DAYS_RANGE = None
<% if @overview_days_range %>
OVERVIEW_DAYS_RANGE = <%= @overview_days_range %>
<% end %>
# AngularJS requires some settings to be made available to
# the client side. Some settings are required by in-tree / built-in horizon
# features. These settings must be added to REST_API_REQUIRED_SETTINGS in the
# form of ['SETTING_1','SETTING_2'], etc.
#
# You may remove settings from this list for security purposes, but do so at
# the risk of breaking a built-in horizon feature. These settings are required
# for horizon to function properly. Only remove them if you know what you
# are doing. These settings may in the future be moved to be defined within
# the enabled panel configuration.
# You should not add settings to this list for out of tree extensions.
# See: https://wiki.openstack.org/wiki/Horizon/RESTAPI
REST_API_REQUIRED_SETTINGS = ['OPENSTACK_HYPERVISOR_FEATURES',
'LAUNCH_INSTANCE_DEFAULTS',
'OPENSTACK_IMAGE_FORMATS',
'CREATE_IMAGE_DEFAULTS',
'OPENSTACK_KEYSTONE_BACKEND',]
# Additional settings can be made available to the client side for
# extensibility by specifying them in REST_API_ADDITIONAL_SETTINGS
# !! Please use extreme caution as the settings are transferred via HTTP/S
# and are not encrypted on the browser. This is an experimental API and
# may be deprecated in the future without notice.
#REST_API_ADDITIONAL_SETTINGS = []
# DISALLOW_IFRAME_EMBED can be used to prevent Horizon from being embedded
# within an iframe. Legacy browsers are still vulnerable to a Cross-Frame
# Scripting (XFS) vulnerability, so this option allows extra security hardening
# where iframes are not used in deployment. Default setting is True.
# For more information see:
# http://tinyurl.com/anticlickjack
#DISALLOW_IFRAME_EMBED = True
<% if @disallow_iframe_embed == true %>
HORIZON_CONFIG["disallow_iframe_embed"] = True
<% end %>
<% if @horizon_upload_mode %>
HORIZON_IMAGES_UPLOAD_MODE = <%= @horizon_upload_mode %>
<% end %>