# # Copyright (C) 2013 eNovance SAS # # Author: Emilien Macchi # # Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. You may obtain # a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the # License for the specific language governing permissions and limitations # under the License. # Configure the conductor service in Ironic # # === Parameters # # [*package_ensure*] # (optional) Control the ensure parameter for the package ressource. # Defaults to 'present'. # # [*enabled*] # (optional) Define if the service must be enabled or not. # Defaults to true. # # [*enabled_hardware_types*] # (optional) Array of hardware types to load during service initialization. # Defaults to ['ipmi']. # # [*max_time_interval*] # (optional) Maximum time, in seconds, since the last check-in of a conductor. # Should be an interger value # Defaults to '120'. # # [*force_power_state_during_sync*] # (optional) Should the hardware power state be set to the state recorded in # the database (True) or should the database be updated based on the hardware # state (False). # Defaults to true. # # [*http_url*] # (optional) ironic-conductor node's HTTP server URL. # Defaults to $::os_service_default # # [*http_root*] # (optional) ironic-conductor node's HTTP root path. # Defaults to $::os_service_default # # [*automated_clean*] # (optional) Whether to enable automated cleaning on nodes. # Defaults to $::os_service_default # # [*cleaning_network*] # (optional) UUID or name of the network to create Neutron ports on, when # booting to a ramdisk for cleaning using Neutron DHCP. # Can not be specified together with cleaning_network_name. # Defaults to $::os_service_default # # [*cleaning_disk_erase*] # (optional) Whether and how to erase hard drives during automated cleaning. # Accepts the following values: # * full - erase all data from all disks, # * metadata - erase only metadata (partitioning table, etc), # * none - do not erase anything (dangerous, use with caution). # Defaults to undef, which leaves the configuration intact # # [*continue_if_disk_secure_erase_fails*] # (optional) Whether to continue with shredding the hard drive if secure ATA # erasure fails. Only makes sense if full hard disk erasing is enabled. # Defaults to $::os_service_default # # [*api_url*] # (optional) Ironic API URL. # Defaults to $::os_service_default # # [*provisioning_network*] # (optional) Neutron network UUID or name for the ramdisk to be booted into # for provisioning nodes. Required for neutron network interface. # Can not be specified together with provisioning_network_name. # Defaults to $::os_service_default # # [*rescuing_network*] # (optional) Neutron network UUID or name for the ramdisk to be booted into # for rescue. Can not be specified together with rescuing_network_name. # Defaults to $::os_service_default # # [*configdrive_use_swift*] # (optional) Whether to use Swift for storing config drives instead of # the database. Recommended for bigger config drives. # Defaults to $::os_service_default # # [*configdrive_swift_container*] # (optinal) Swift container to use for storing config drives if # configdrive_use_swift is true. # Defaults to $::os_service_default # # [*inspect_timeout*] # (optional) Timeout (seconds) for waiting for node inspection. # 0 for unlimited. # Defaults to $::os_service_default # # [*default_boot_option*] # (optional) Default boot option to use when no boot option is explicitly # requested. One of "netboot" or "local". # Defaults to $::os_service_default # # [*default_boot_mode*] # (optional) Default boot mode to use when no boot mode is explicitly # requested in node's driver_info, capabilities or in the "instance_info" # configuration.requested. One of "bios" or "uefi". # Defaults to $::os_service_default # # [*cleaning_network_name*] # (optional) If provided the name will be converted to UUID and set # as value of neutron/cleaning_network option in ironic.conf # Can not be specified together with cleaning_network. # Defaults to undef, which leaves the configuration intact # # [*provisioning_network_name*] # (optional) If provided the name will be converted to UUID and set # as value of neutron/provisioning_network option in ironic.conf # Can not be specified together with provisioning_network. # Defaults to undef, which leaves the configuration intact # # [*rescuing_network_name*] # (optional) If provided the name will be converted to UUID and set # as value of neutron/rescuing option in ironic.conf # Can not be specified together with rescuing_network. # Defaults to undef, which leaves the configuration intact # # [*port_setup_delay*] # (optional) Delay value to wait for Neutron agents to setup # sufficient DHCP configuration for port. # Defaults to $::os_service_default # # [*power_state_change_timeout*] # (optional) Timeout value to wait for a power operation to complete, # so that the baremetal node is in the desired new power state. # Defaults to $::os_service_default # # [*sync_power_state_interval*] # (optional) Interval between syncing the node power state to the database, # in seconds. # Defaults to $::os_service_default # # [*power_state_sync_max_retries*] # (optional) The number of times Ironic should try syncing the hardware node # power state with the node power state in the database. # Defaults to $::os_service_default # # [*power_failure_recovery_interval*] # (optional) Interval (in seconds) between checking the power # state for nodes previously put into maintenance mode due to power # synchronization failure. # Defaults to $::os_service_default # # DEPRECATED PARAMETERS # # [*enabled_drivers*] # (optional) Array of drivers to load during service initialization. # Deprecated and does nothing since the classic drivers have been removed. # Defaults to undef # class ironic::conductor ( $package_ensure = 'present', $enabled = true, $enabled_hardware_types = ['ipmi'], $max_time_interval = '120', $force_power_state_during_sync = true, $http_url = $::os_service_default, $http_root = $::os_service_default, $automated_clean = $::os_service_default, $cleaning_network = $::os_service_default, $cleaning_disk_erase = undef, $continue_if_disk_secure_erase_fails = $::os_service_default, $api_url = $::os_service_default, $provisioning_network = $::os_service_default, $rescuing_network = $::os_service_default, $configdrive_use_swift = $::os_service_default, $configdrive_swift_container = $::os_service_default, $inspect_timeout = $::os_service_default, $default_boot_option = $::os_service_default, $default_boot_mode = $::os_service_default, $port_setup_delay = $::os_service_default, $cleaning_network_name = undef, $provisioning_network_name = undef, $rescuing_network_name = undef, $power_state_change_timeout = $::os_service_default, $sync_power_state_interval = $::os_service_default, $power_state_sync_max_retries = $::os_service_default, $power_failure_recovery_interval = $::os_service_default, $enabled_drivers = undef, ) { include ::ironic::deps include ::ironic::params # For backward compatibility include ::ironic::glance if ($cleaning_network_name and !is_service_default($cleaning_network)) { fail('cleaning_network_name and cleaning_network can not be specified at the same time.') } if ($provisioning_network_name and !is_service_default($provisioning_network)) { fail('provisioning_network_name and provisioning_network can not be specified in the same time.') } if ($rescuing_network_name and !is_service_default($rescuing_network)) { fail('rescuing_network_name and rescuing_network can not be specified in the same time.') } validate_array($enabled_hardware_types) # NOTE(dtantsur): all in-tree drivers are IPA-based, so it won't hurt # including its manifest (which only contains configuration options) include ::ironic::drivers::agent # On Ubuntu, ipmitool dependency is missing and ironic-conductor fails to start. # https://bugs.launchpad.net/cloud-archive/+bug/1572800 if member($enabled_hardware_types, 'ipmi') and $::osfamily == 'Debian' { ensure_packages('ipmitool', { ensure => $package_ensure, tag => ['openstack', 'ironic-package'], } ) } if $cleaning_disk_erase { validate_re($cleaning_disk_erase, ['^full$', '^metadata$', '^none$']) } case $cleaning_disk_erase { 'full': { $erase_devices_priority = 10 $erase_devices_metadata_priority = 0 } 'metadata': { $erase_devices_priority = 0 $erase_devices_metadata_priority = 10 } 'none': { $erase_devices_priority = 0 $erase_devices_metadata_priority = 0 } default: { $erase_devices_priority = $::os_service_default $erase_devices_metadata_priority = $::os_service_default } } # Configure ironic.conf ironic_config { # Force removal of the deprecated options to avoid failures. Remove in Stein. 'DEFAULT/enabled_drivers': ensure => absent; 'DEFAULT/enabled_hardware_types': value => join($enabled_hardware_types, ','); 'conductor/max_time_interval': value => $max_time_interval; 'conductor/force_power_state_during_sync': value => $force_power_state_during_sync; 'conductor/automated_clean': value => $automated_clean; 'conductor/api_url': value => $api_url; 'deploy/http_url': value => $http_url; 'deploy/http_root': value => $http_root; 'deploy/erase_devices_priority': value => $erase_devices_priority; 'deploy/erase_devices_metadata_priority': value => $erase_devices_metadata_priority; 'deploy/continue_if_disk_secure_erase_fails': value => $continue_if_disk_secure_erase_fails; 'conductor/configdrive_use_swift': value => $configdrive_use_swift; 'conductor/configdrive_swift_container': value => $configdrive_swift_container; 'conductor/inspect_timeout': value => $inspect_timeout; 'deploy/default_boot_option': value => $default_boot_option; 'deploy/default_boot_mode': value => $default_boot_mode; 'neutron/port_setup_delay': value => $port_setup_delay; 'conductor/power_state_change_timeout': value => $power_state_change_timeout; 'conductor/sync_power_state_interval': value => $sync_power_state_interval; 'conductor/power_state_sync_max_retries': value => $power_state_sync_max_retries; 'conductor/power_failure_recovery_interval': value => $power_failure_recovery_interval; } if $cleaning_network_name { ironic_config { 'neutron/cleaning_network': value => $cleaning_network_name, transform_to => 'net_uuid'; } } else { ironic_config { 'neutron/cleaning_network': value => $cleaning_network; } } if $provisioning_network_name { ironic_config { 'neutron/provisioning_network': value => $provisioning_network_name, transform_to => 'net_uuid'; } } else { ironic_config { 'neutron/provisioning_network': value => $provisioning_network; } } if $rescuing_network_name { ironic_config { 'neutron/rescuing_network': value => $rescuing_network_name, transform_to => 'net_uuid'; } } else { ironic_config { 'neutron/rescuing_network': value => $rescuing_network; } } # Install package if $::ironic::params::conductor_package { package { 'ironic-conductor': ensure => $package_ensure, name => $::ironic::params::conductor_package, tag => ['openstack', 'ironic-package'], } } if $enabled { $ensure = 'running' } else { $ensure = 'stopped' } # Manage service service { 'ironic-conductor': ensure => $ensure, name => $::ironic::params::conductor_service, enable => $enabled, hasstatus => true, tag => 'ironic-service', } }