openstack/puppet-ironic
Code Issues Proposed changes
565b060fcd
puppet-ironic/manifests/bifrost.pp
Adam Vinsh 9fe25f3a23 Add hooks for external install & svc management 
This adds defined anchor points for external modules to hook into the
software install, config and service dependency chain.  This allows
external modules to manage software installation (virtualenv,
containers, etc) and service management (pacemaker) without needing rely
on resources that may change or be renamed.

Change-Id: I31c023824e428ad0fc3dad30b4d3103aaa747597
2016-09-17 17:11:05 -06:00

219 lines
7.9 KiB
Puppet
Raw Blame History

# Copyright 2015 Hewlett-Packard Development Company, L.P.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
# == Class: ironic::bifrost
#
# Installs and configures Bifrost
# Bifrost is a set of Ansible playbooks that automates the task of deploying a
# base image onto a set of known hardware using Ironic. It provides modular
# utility for one-off operating system deployment with as few operational requirements
# as reasonably possible.
# Bifrost also allows to install Ironic in a stand-alone fashion. In this kind of setup,
# neither Keystone nor Neutron is installed, and dnsmasq is used to provide PXE booting.
#
# [*ironic_db_password*]
# (required) The Ironic DB password
#
# [*mysql_password*]
# (required) The mysql server password
#
# [*baremetal_json_hosts*]
# (required) Baremetal hosts in JSON format, will be included in baremetal.json
#
# [*git_source_repo*]
# (optional) Git repository location for pulling Bifrost
# Defaults to 'https://git.openstack.org/openstack/bifrost'
#
# [*revision*]
# (optional) The branch or commit to checkout on Bifrost repository
# Defaults to 'master'
#
# [*ensure*]
# (optional) Ensure value for cloning the Bifrost repository.
# This is a pass-thru variable for vcsrepo, acceptable values are
# present/bare/absent/latest
# Typically, you may want to set this value to either present or absent and use
# revision for setting the branch or commit to clone.
# Defaults to 'present'
#
# [*revision*]
# (optional) The branch or commit to checkout on Bifrost repository
# Defaults to 'master'
#
# [*git_dest_repo_folder*]
# (optional) Folder to clone the Bifrost git repository
# Defaults to '/opt/stack/bifrost'
#
# [*bifrost_config_folder*]
# (optional) Folder to keep the configuration files, namely the global vars file
# and baremetal.json
# Defaults to '/etc/bifrost'
# Note that due to how Ansible handles the directory layout of playbooks and roles,
# you will need to pass '-e "@/etc/bifrost/bifrost_global_vars' switch to 'ansible-playbook'
# to load the variables at execution time.
# For more information, check http://docs.ansible.com/ansible/playbooks_variables.html
#
# [*ironic_url*]
# (optional) The URL of the Ironic server
# Defaults to '"http://localhost:6385"'
#
# [*network_interface*]
# (optional) The network interface DHCP will serve requests on
# Defaults to '"virbr0"'
#
# [*testing*]
# (optional) If true, Ironic will provision libvirt and VMs instead of baremetal
# Defaults to 'false'
#
# [*testing_user*]
# (optional) VM default user in case testing is enabled
# Defaults to 'ubuntu'
#
# [*http_boot_folder*]
# (optional) gPXE folder location for HTTP PXE boot
# Defaults to '/httpboot'
#
# [*nginx_port*]
# (optional) NGINX HTTP port
# Defaults to 8080
# [*ssh_public_key_path*]
# (optional) SSH public key location, this will be injected in provisioned servers
# Defaults to '"{{ ansible_env.HOME }}/.ssh/id_rsa.pub"'
#
# [*deploy_kernel*]
# (optional) Kernel to PXE boot from
# Defaults to '"{{http_boot_folder}}/coreos_production_pxe.vmlinuz"'
#
# [*deploy_ramdisk*]
# (optional) Ramdisk to load after kernel boot
# Defaults to '"{{http_boot_folder}}/coreos_production_pxe_image-oem.cpio.gz"'
#
# [*deploy_kernel_url*]
# (optional) Kernel URL
# Defaults to '"http://{{ hostvars[inventory_hostname][\'ansible_\' + network_interface][\'ipv4\'][\'address\'] }}:{{nginx_port}}/coreos_production_pxe.vmlinuz"'
#
# [*deploy_ramdisk_url*]
# (optional) Ramdisk URL
# Defaults to '"http://{{ hostvars[inventory_hostname][\'ansible_\' + network_interface][\'ipv4\'][\'address\'] }}:{{nginx_port}}/coreos_production_pxe_image-oem.cpio.gz"'
#
# [*deploy_image_filename*]
# (optional) Deploy image filename
# Defaults to '"deployment_image.qcow2"'
#
# [*deploy_image*]
# (optional) URL for the deployment image
# Defaults to '"{{http_boot_folder}}/{{deploy_image_filename}}"'
#
# [*create_image_via_dib*]
# (optional) Flag to enable/disable image creation with diskimage-builder
# Defaults to 'true'
#
# [*transform_boot_image*]
# (optional) Flag to prepend a partition image with boot sector and partition table
# Defaults to 'false'
#
# [*node_default_network_interface*]
# (optional) Default network interface to configure with configdrive settings
# Defaults to 'eth0'
#
# [*ipv4_subnet_mask*]
# (optional) Subnet mask for configured NIC
# Defaults to '255.255.255.0'
#
# [*ipv4_gateway*]
# (optional) Gateway for configured NIC
# Defaults to '192.168.1.1'
#
# [*ipv4_nameserver*]
# (optional) Nameserver for DNS configuration
# Defaults to '8.8.8.8'
#
# [*network_mtu*]
# (optional) MTU for configured NIC
# Defaults to '1500'
#
# [*dhcp_pool_start*]
# (optional) Dnsmasq DHCP pool start
# Defaults to '192.168.1.200'
#
# [*dhcp_pool_end*]
# (optional) Dnsmasq DHCP pool end
# Defaults to '192.168.1.250'
#
# [*ipmi_bridging*]
# (optional) Flag to enable/disable IPMI bridging
# Defaults to 'no'
class ironic::bifrost (
$ironic_db_password,
$mysql_password,
$baremetal_json_hosts,
$git_source_repo = 'https://git.openstack.org/openstack/bifrost',
$ensure = present,
$revision = 'master',
$git_dest_repo_folder = '/opt/stack/bifrost',
$bifrost_config_folder = '/etc/bifrost',
$ironic_url = '"http://localhost:6385/"',
$network_interface = '"virbr0"',
$testing = false,
$testing_user = 'ubuntu',
$http_boot_folder = '/httpboot',
$nginx_port = 8080,
$ssh_public_key_path = '"{{ ansible_env.HOME }}/.ssh/id_rsa.pub"',
$deploy_kernel = '"{{http_boot_folder}}/coreos_production_pxe.vmlinuz"',
$deploy_ramdisk = '"{{http_boot_folder}}/coreos_production_pxe_image-oem.cpio.gz"',
$deploy_kernel_url = '"http://{{ hostvars[inventory_hostname][\'ansible_\' + network_interface][\'ipv4\'][\'address\'] }}:{{nginx_port}}/coreos_production_pxe.vmlinuz"',
$deploy_ramdisk_url = '"http://{{ hostvars[inventory_hostname][\'ansible_\' + network_interface][\'ipv4\'][\'address\'] }}:{{nginx_port}}/coreos_production_pxe_image-oem.cpio.gz"',
$deploy_image_filename = '"deployment_image.qcow2"',
$deploy_image = '"{{http_boot_folder}}/{{deploy_image_filename}}"',
$create_image_via_dib = true,
$transform_boot_image = false,
$node_default_network_interface = 'eth0',
$ipv4_subnet_mask = '255.255.255.0',
$ipv4_gateway = '192.168.1.1',
$ipv4_nameserver = '8.8.8.8',
$network_mtu = '1500',
$dhcp_pool_start = '192.168.1.200',
$dhcp_pool_end = '192.168.1.250',
$ipmi_bridging = 'no',
) {
include ::ironic::deps
vcsrepo { $git_dest_repo_folder:
ensure => $ensure,
provider => git,
revision => $revision,
source => $git_source_repo,
}
file { $bifrost_config_folder:
ensure => directory
}
file { "${bifrost_config_folder}/bifrost_global_vars":
ensure => present,
content => template('ironic/bifrost_global_vars.erb'),
require => File[$bifrost_config_folder],
}
file { "${bifrost_config_folder}/baremetal.json":
ensure => present,
content => template('ironic/baremetal.json.erb'),
require => File[$bifrost_config_folder],
}
}
View Git Blame Copy Permalink