openstack/puppet-octavia
Code Issues Proposed changes
b3bccf3b50
puppet-octavia/manifests/controller.pp
Takashi Kajinami 533d9e0d3a Require valid flavor id, key name and project name 
Flavor id and key name are required so that amphora driver functions
properly.

Also the project name to which the amphora belongs should be a valid
name, otherwise the flavor can't be created properly.

Change-Id: I9d6050013ecd58f588cdca2ff9e32258e2e11d0d
2023-07-17 20:26:59 +09:00

391 lines
18 KiB
Puppet
Raw Blame History

# == Class: octavia::controller
#
# === Parameters
#
# [*heartbeat_key*]
# (required) Key to validate amphora messages.
# Defaults to undef
#
# [*amp_active_retries*]
# (optional) Retry attempts to wait for Amphora to become active.
# Defaults to $facts['os_service_default']
#
# [*amp_active_wait_sec*]
# (optional) Seconds to wait between checks on whether an Amphora has
# become active.
# Defaults to $facts['os_service_default']
#
# [*amp_flavor_id*]
# (optional) Nova instance flavor id for the Amphora.
# Note: since we set manage_nova_flavor to True by default, we need
# to set a valid amp_flavor_id by default, 65 was picked randomly.
# Defaults to '65'.
#
# [*amp_image_tag*]
# Glance image tag for Amphora image. Allows the Amphora image to be
# referred to by a tag instead of an ID, allowing the Amphora image to
# be updated without requiring reconfiguration of Octavia.
# Defaults to $facts['os_service_default']
#
# [*amp_image_owner_id*]
# Restrict glance image selection to a specific owner ID. This is a
# recommended security setting.
# Defaults to $facts['os_service_default']
#
# [*amp_secgroup_list*]
# List of security groups to use for Amphorae.
# Defaults to $facts['os_service_default']
#
# [*amp_boot_network_list*]
# List of networks to attach to Amphorae.
# Defaults to $facts['os_service_default']
#
# [*loadbalancer_topology*]
# (optional) Load balancer topology configuration
# Defaults to $facts['os_service_default']
#
# [*amphora_driver*]
# (optional) Name of driver for communicating with amphorae
# Defaults to $facts['os_service_default']
#
# [*compute_driver*]
# (optional) Name of driver for managing amphorae VMs
# Defaults to $facts['os_service_default']
#
# [*network_driver*]
# (optional) Name of network driver for configuring networking
# for amphorae.
# Defaults to $facts['os_service_default']
#
# [*volume_driver*]
# (optional) Name of volume driver for managing amphora volumes
# Defaults to $facts['os_service_default']
#
# [*image_driver*]
# (optional) Name of volume driver for managing amphora image
# Defaults to $facts['os_service_default']
#
# [*amp_timezone*]
# (optional) Defines the timezone to use as represented in
# /usr/share/zoneinfo.
# Defaults to $facts['os_service_default']
#
# [*amphora_delete_retries*]
# (optional) Number of times an amphora delete should be retried.
# Defaults to $facts['os_service_default']
#
# [*amphora_delete_retry_interval*]
# (optional) Time, in seconds, between amphora delete retries.
# Defaults to $facts['os_service_default']
#
# [*event_notifications*]
# (optional) Enable octavia event notifications.
# Defaults to $facts['os_service_default']
#
# [*amp_ssh_key_name*]
# (optional) Name of Openstack SSH keypair for communicating with amphora
# Defaults to 'octavia-ssh-key'
#
# [*enable_ssh_access*]
# (optional) Enable SSH key configuration for amphorae. Note that setting
# to false disables configuration of SSH key related properties.
# Defaults to true
#
# [*timeout_client_data*]
# (optional) Frontend client inactivity timeout.
# Defaults to $facts['os_service_default']
#
# [*timeout_member_connect*]
# (optional) Backend member connection timeout.
# Defaults to $facts['os_service_default']
#
# [*timeout_member_data*]
# (optional) Backend member inactivity timeout.'
# Defaults to $facts['os_service_default']
#
# [*timeout_tcp_inspect*]
# (optional) Time to wait for TCP packets for content inspection.
# Defaults to $facts['os_service_default']
#
# [*connection_max_retries*]
# (optional) Maximum number of retries when contacting amphora.
# Defaults to $facts['os_service_default']
#
# [*connection_retry_interval*]
# (optional) Number of seconds to wait between connection attempts to amphora.
# Defaults to $facts['os_service_default']
#
# [*active_connection_max_retries*]
# (optional) Retry threshold for connecting to active amphorae.
# Defaults to $facts['os_service_default']
#
# [*active_connection_retry_interval*]
# (optional) Retry timeout between connection attempts in seconds for active
# amphora.
# Defaults to $facts['os_service_default']
#
# [*failover_connection_max_retries*]
# (optional) Retry threshold for connecting to an amphora in failover.
# Defaults to $facts['os_service_default']
#
# [*failover_connection_retry_interval*]
# (optional) Retry timeout between connection attempts in seconds for amphora
# in failover.
# Defaults to $facts['os_service_default']
#
# [*connection_logging*]
# (optional) When false, disables logging of tenant connection flows. This
# includes storing them locally and sending them to the tenant syslog
# endpoints.
# Defaults to $facts['os_service_default']
#
# [*build_rate_limit*]
# (optional) Number of amphorae that could be build per controller worker,
# simultaneously.
# Defaults to $facts['os_service_default']
#
# [*build_active_retries*]
# (optional) Retry threshold for waiting for a build slot for an amphorae.
# Defaults to $facts['os_service_default']
#
# [*build_retry_interval*]
# (optional) Retry timeout between build attempts in seconds.
# Defaults to $facts['os_service_default']
#
# [*default_connection_limit*]
# (optional) Default connection_limit for listeners.
# Defaults to $facts['os_service_default']
#
# [*agent_request_read_timeout*]
# (optional) The time in seconds to allow a request from the controller to
# run before terminating the socket.
# Defaults to $facts['os_service_default']
#
# [*agent_tls_protocol*]
# (optional) Minimum TLS protocol for communication with the amphora agent.
# Defaults to $facts['os_service_default']
#
# [*admin_log_targets*]
# (optional) The list of syslog endpoints, host:port comma separated list,
# to receive administrative log messages.
# Defaults to $facts['os_service_default']
#
# [*administrative_log_facility*]
# (optional) The syslog "LOG_LOCAL" facility to use for the administrative
# log messages.
# Defaults to $facts['os_service_default']
#
# [*forward_all_logs*]
# (optional) When true, all log messages from the amphora will be forwarded
# to the administrative log endpoints, including non-load balancing related
# logs.
# Defaults to $facts['os_service_default']
#
# [*tenant_log_targets*]
# (optional) The list of syslog endpoints, host:port comma separated list,
# to receive tenant traffic flow log messages.
# Defaults to $facts['os_service_default']
#
# [*user_log_facility*]
# (optional) The syslog "LOG_LOCAL" facility to use for the tenant traffic
# flow log messages.
# Defaults to $facts['os_service_default']
#
# [*user_log_format*]
# (optional) The tenant traffic flow log format string.
# Defaults to $facts['os_service_default']
#
# [*log_protocol*]
# (optional) The log forwarding transport protoocl. One of UDP or TCP.
# Defaults to $facts['os_service_default']
#
# [*log_retry_count*]
# (optional) The maximum attempts to retry connecting to the logging host.
# Defaults to $facts['os_service_default']
#
# [*log_retry_interval*]
# (optional) The time, in seconds, to wait between retries connecting to
# the logging host.
# Defaults to $facts['os_service_default']
#
# [*log_queue_size*]
# (optional) The queue size (messages) to buffer log messages.
# Defaults to $facts['os_service_default']
#
# [*logging_template_override*]
# (optional) Custom logging configuration template.
# Defaults to $facts['os_service_default']
#
# [*disable_local_log_storage*]
# (optional) When true, logs will not be stored on the amphora filesystem.
# This includes all kernel, system, and security logs.
# Defaults to $facts['os_service_default']
#
# [*vrrp_advert_int*]
# (optional) Amphora role and priority advertisement internal in seconds.
# Defaults to $facts['os_service_default']
#
# [*vrrp_check_interval*]
# (optional) VRRP health check script run interval in seconds.
# Defaults to $facts['os_service_default']
#
# [*vrrp_fail_count*]
# (optional) Number of successive failures before transition to a fail rate.
# Defaults to $facts['os_service_default']
#
# [*vrrp_success_count*]
# (optional) Number of consecutive successes before transition to a success rate.
# Defaults to $facts['os_service_default']
#
# [*vrrp_garp_refresh_interval*]
# (optional) Time in seconds between gratuitous ARP announcements from the MASTER.
# Defaults to $facts['os_service_default']
#
# [*vrrp_garp_refresh_count*]
# (optional) Number of gratuitous ARP announcements to make on each refresh interval.
# Defaults to $facts['os_service_default']
#
# [*controller_ip_port_list*]
# (optional) The list of controllers in a host:port comma separated
# list if multiple. This is added to the amphora config and is used
# when it connects back to the controllers to report its health.
# Defaults to $facts['os_service_default']
#
# [*heartbeat_interval*]
# (optional) Sleep time between sending heartbeats.
# Defaults to undef
#
class octavia::controller (
String[1] $heartbeat_key,
$amp_active_retries = $facts['os_service_default'],
$amp_active_wait_sec = $facts['os_service_default'],
String[1] $amp_flavor_id = '65',
$amp_image_tag = $facts['os_service_default'],
$amp_image_owner_id = $facts['os_service_default'],
$amp_secgroup_list = $facts['os_service_default'],
$amp_boot_network_list = $facts['os_service_default'],
$loadbalancer_topology = $facts['os_service_default'],
$amphora_driver = $facts['os_service_default'],
$compute_driver = $facts['os_service_default'],
$network_driver = $facts['os_service_default'],
$volume_driver = $facts['os_service_default'],
$image_driver = $facts['os_service_default'],
$amp_timezone = $facts['os_service_default'],
$amphora_delete_retries = $facts['os_service_default'],
$amphora_delete_retry_interval = $facts['os_service_default'],
$event_notifications = $facts['os_service_default'],
Boolean $enable_ssh_access = true,
String[1] $amp_ssh_key_name = 'octavia-ssh-key',
$timeout_client_data = $facts['os_service_default'],
$timeout_member_connect = $facts['os_service_default'],
$timeout_member_data = $facts['os_service_default'],
$timeout_tcp_inspect = $facts['os_service_default'],
$connection_max_retries = $facts['os_service_default'],
$connection_retry_interval = $facts['os_service_default'],
$connection_logging = $facts['os_service_default'],
$active_connection_max_retries = $facts['os_service_default'],
$active_connection_retry_interval = $facts['os_service_default'],
$failover_connection_max_retries = $facts['os_service_default'],
$failover_connection_retry_interval = $facts['os_service_default'],
$build_rate_limit = $facts['os_service_default'],
$build_active_retries = $facts['os_service_default'],
$build_retry_interval = $facts['os_service_default'],
$default_connection_limit = $facts['os_service_default'],
$agent_request_read_timeout = $facts['os_service_default'],
$agent_tls_protocol = $facts['os_service_default'],
$admin_log_targets = $facts['os_service_default'],
$administrative_log_facility = $facts['os_service_default'],
$forward_all_logs = $facts['os_service_default'],
$tenant_log_targets = $facts['os_service_default'],
$user_log_facility = $facts['os_service_default'],
$user_log_format = $facts['os_service_default'],
$log_protocol = $facts['os_service_default'],
$log_retry_count = $facts['os_service_default'],
$log_retry_interval = $facts['os_service_default'],
$log_queue_size = $facts['os_service_default'],
$logging_template_override = $facts['os_service_default'],
$disable_local_log_storage = $facts['os_service_default'],
$vrrp_advert_int = $facts['os_service_default'],
$vrrp_check_interval = $facts['os_service_default'],
$vrrp_fail_count = $facts['os_service_default'],
$vrrp_success_count = $facts['os_service_default'],
$vrrp_garp_refresh_interval = $facts['os_service_default'],
$vrrp_garp_refresh_count = $facts['os_service_default'],
$controller_ip_port_list = $facts['os_service_default'],
$heartbeat_interval = $facts['os_service_default'],
) inherits octavia::params {
include octavia::deps
include octavia::db
if ! is_service_default($loadbalancer_topology) and
! ($loadbalancer_topology in ['SINGLE', 'ACTIVE_STANDBY']) {
fail('load balancer topology must be one of SINGLE or ACTIVE_STANDBY')
}
if $enable_ssh_access {
octavia_config { 'controller_worker/amp_ssh_key_name' : value => $amp_ssh_key_name; }
}
else {
octavia_config { 'controller_worker/amp_ssh_key_name' : value => $facts['os_service_default'] }
}
octavia_config {
'controller_worker/amp_active_retries' : value => $amp_active_retries;
'controller_worker/amp_active_wait_sec' : value => $amp_active_wait_sec;
'controller_worker/amp_flavor_id' : value => $amp_flavor_id;
'controller_worker/amp_image_tag' : value => $amp_image_tag;
'controller_worker/amp_image_owner_id' : value => $amp_image_owner_id;
'controller_worker/amp_secgroup_list' : value => join(any2array($amp_secgroup_list), ',');
'controller_worker/amp_boot_network_list' : value => join(any2array($amp_boot_network_list), ',');
'controller_worker/loadbalancer_topology' : value => $loadbalancer_topology;
'controller_worker/amphora_driver' : value => $amphora_driver;
'controller_worker/compute_driver' : value => $compute_driver;
'controller_worker/network_driver' : value => $network_driver;
'controller_worker/volume_driver' : value => $volume_driver;
'controller_worker/image_driver' : value => $image_driver;
'controller_worker/amp_timezone' : value => $amp_timezone;
'controller_worker/amphora_delete_retries' : value => $amphora_delete_retries;
'controller_worker/amphora_delete_retry_interval' : value => $amphora_delete_retry_interval;
'controller_worker/event_notifications' : value => $event_notifications;
'haproxy_amphora/timeout_client_data' : value => $timeout_client_data;
'haproxy_amphora/timeout_member_connect' : value => $timeout_member_connect;
'haproxy_amphora/timeout_member_data' : value => $timeout_member_data;
'haproxy_amphora/timeout_tcp_inspect' : value => $timeout_tcp_inspect;
'haproxy_amphora/connection_max_retries' : value => $connection_max_retries;
'haproxy_amphora/connection_retry_interval' : value => $connection_retry_interval;
'haproxy_amphora/connection_logging' : value => $connection_logging;
'haproxy_amphora/active_connection_max_retries' : value => $active_connection_max_retries;
'haproxy_amphora/active_connection_retry_interval' : value => $active_connection_retry_interval;
'haproxy_amphora/failover_connection_max_retries' : value => $failover_connection_max_retries;
'haproxy_amphora/failover_connection_retry_interval' : value => $failover_connection_retry_interval;
'haproxy_amphora/build_rate_limit' : value => $build_rate_limit;
'haproxy_amphora/build_active_retries' : value => $build_active_retries;
'haproxy_amphora/build_retry_interval' : value => $build_retry_interval;
'haproxy_amphora/default_connection_limit' : value => $default_connection_limit;
'amphora_agent/agent_request_read_timeout' : value => $agent_request_read_timeout;
'amphora_agent/agent_tls_protocol' : value => $agent_tls_protocol;
'amphora_agent/admin_log_targets' : value => join(any2array($admin_log_targets), ',');
'amphora_agent/administrative_log_facility' : value => $administrative_log_facility;
'amphora_agent/forward_all_logs' : value => $forward_all_logs;
'amphora_agent/tenant_log_targets' : value => join(any2array($tenant_log_targets), ',');
'amphora_agent/user_log_facility' : value => $user_log_facility;
'haproxy_amphora/user_log_format' : value => $user_log_format;
'amphora_agent/log_protocol' : value => $log_protocol;
'amphora_agent/log_retry_count' : value => $log_retry_count;
'amphora_agent/log_retry_interval' : value => $log_retry_interval;
'amphora_agent/log_queue_size' : value => $log_queue_size;
'amphora_agent/logging_template_override' : value => $logging_template_override;
'amphora_agent/disable_local_log_storage' : value => $disable_local_log_storage;
'keepalived_vrrp/vrrp_advert_int' : value => $vrrp_advert_int;
'keepalived_vrrp/vrrp_check_interval' : value => $vrrp_check_interval;
'keepalived_vrrp/vrrp_fail_count' : value => $vrrp_fail_count;
'keepalived_vrrp/vrrp_success_count' : value => $vrrp_success_count;
'keepalived_vrrp/vrrp_garp_refresh_interval' : value => $vrrp_garp_refresh_interval;
'keepalived_vrrp/vrrp_garp_refresh_count' : value => $vrrp_garp_refresh_count;
'health_manager/controller_ip_port_list' : value => join(any2array($controller_ip_port_list), ',');
'health_manager/heartbeat_key' : value => $heartbeat_key, secret => true;
'health_manager/heartbeat_interval' : value => $heartbeat_interval;
}
}
View Git Blame Copy Permalink