fence_eaton_snmp is an I/O Fencing agent which can be used with the Eaton network power switch. It logs into a device via SNMP and reboots a specified outlet. It supports SNMP v1 and v3 with all combinations of authenticity/privacy settings. http://powerquality.eaton.com IP Address or Hostname Login Name Login password or passphrase Physical plug number, name of virtual machine or UUID Specifies SNMP version to use (1,2c,3) Set the community string TCP/UDP port to use for connection with device Forces agent to use IPv4 addresses only Forces agent to use IPv6 addresses only Script to retrieve password Set authentication protocol (MD5|SHA) Set security level (noAuthNoPriv|authNoPriv|authPriv) Set privacy protocol (DES|AES) Set privacy protocol password Script to run to retrieve privacy password Fencing Action Verbose mode Write debug information to given file Display version information and exit Display help and exit Separator for CSV created by operation list Test X seconds for status change after ON/OFF Wait X seconds for cmd prompt after issuing command Wait X seconds for cmd prompt after login Wait X seconds after issuing ON/OFF Wait X seconds before fencing is started Count of attempts to retry power on