# # Copyright (C) 2014 eNovance SAS # # Author: Emilien Macchi # # Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. You may obtain # a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the # License for the specific language governing permissions and limitations # under the License. # trove::init # # Trove base config # # == Parameters # # [*default_transport_url*] # (optional) A URL representing the messaging driver to use and its full # configuration. Transport URLs take the form: # transport://user:pass@host1:port[,hostN:portN]/virtual_host # Defaults to $::os_service_default # # [*notification_transport_url*] # (optional) A URL representing the messaging driver to use for # notifications and its full configuration. Transport URLs # take the form: # transport://user:pass@host1:port[,hostN:portN]/virtual_host # Defaults to $::os_service_default. # # [*notification_driver*] # (optional) Driver or drivers to handle sending notifications. # Value can be a string or a list. # Defaults to $::os_service_default # # [*notification_topics*] # (optional) AMQP topic used for OpenStack notifications # Defaults to $::os_service_default # # [*rabbit_use_ssl*] # (optional) Connect over SSL for RabbitMQ # Defaults to $::os_service_default # # [*rabbit_notification_topic*] # (optional) Notification topic. # Defaults to $::os_service_default # # [*kombu_ssl_ca_certs*] # (optional) SSL certification authority file (valid only if SSL enabled). # Defaults to $::os_service_default # # [*kombu_ssl_certfile*] # (optional) SSL cert file (valid only if SSL enabled). # Defaults to $::os_service_default # # [*kombu_ssl_keyfile*] # (optional) SSL key file (valid only if SSL enabled). # Defaults to $::os_service_default # # [*kombu_ssl_version*] # (optional) SSL version to use (valid only if SSL enabled). # Valid values are TLSv1, SSLv23 and SSLv3. SSLv2 may be # available on some distributions. # Defaults to $::os_service_default # # [*rabbit_ha_queues*] # (optional) Use HA queues in RabbitMQ (x-ha-policy: all). # Defaults to $::os_service_default # # [*rabbit_heartbeat_in_pthread*] # (Optional) EXPERIMENTAL: Run the health check heartbeat thread # through a native python thread. By default if this # option isn't provided the health check heartbeat will # inherit the execution model from the parent process. By # example if the parent process have monkey patched the # stdlib by using eventlet/greenlet then the heartbeat # will be run through a green thread. # Defaults to $::os_service_default # # [*kombu_reconnect_delay*] # (optional) How long to wait before reconnecting in response to an AMQP # consumer cancel notification. # Defaults to $::os_service_default # # [*kombu_failover_strategy*] # (Optional) Determines how the next RabbitMQ node is chosen in case the one # we are currently connected to becomes unavailable. Takes effect only if # more than one RabbitMQ node is provided in config. (string value) # Defaults to $::os_service_default # # [*amqp_durable_queues*] # (optional) Define queues as "durable" to rabbitmq. # Defaults to $::os_service_default # # [*amqp_server_request_prefix*] # (Optional) Address prefix used when sending to a specific server # Defaults to $::os_service_default. # # [*amqp_broadcast_prefix*] # (Optional) address prefix used when broadcasting to all servers # Defaults to $::os_service_default. # # [*amqp_group_request_prefix*] # (Optional) address prefix when sending to any server in group # Defaults to $::os_service_default. # # [*amqp_container_name*] # (Optional) Name for the AMQP container # Defaults to $::os_service_default. # # [*amqp_idle_timeout*] # (Optional) Timeout for inactive connections # Defaults to $::os_service_default. # # [*amqp_trace*] # (Optional) Debug: dump AMQP frames to stdout # Defaults to $::os_service_default. # # [*amqp_ssl_ca_file*] # (Optional) CA certificate PEM file to verify server certificate # Defaults to $::os_service_default. # # [*amqp_ssl_cert_file*] # (Optional) Identifying certificate PEM file to present to clients # Defaults to $::os_service_default. # # [*amqp_ssl_key_file*] # (Optional) Private key PEM file used to sign cert_file certificate # Defaults to $::os_service_default. # # [*amqp_ssl_key_password*] # (Optional) Password for decrypting ssl_key_file (if encrypted) # Defaults to $::os_service_default. # # [*amqp_allow_insecure_clients*] # (Optional) Accept clients using either SSL or plain TCP # Defaults to $::os_service_default. # # [*amqp_sasl_mechanisms*] # (Optional) Space separated list of acceptable SASL mechanisms # Defaults to $::os_service_default. # # [*amqp_sasl_config_dir*] # (Optional) Path to directory that contains the SASL configuration # Defaults to $::os_service_default. # # [*amqp_sasl_config_name*] # (Optional) Name of configuration file (without .conf suffix) # Defaults to $::os_service_default. # # [*amqp_username*] # (Optional) User name for message broker authentication # Defaults to $::os_service_default. # # [*amqp_password*] # (Optional) Password for message broker authentication # Defaults to $::os_service_default. # # [*database_connection*] # (optional) Connection url to connect to trove database. # Defaults to undef. # # [*database_idle_timeout*] # (optional) Timeout before idle db connections are reaped. # Defaults to undef. # # [*database_max_retries*] # (optional) Maximum number of database connection retries during startup. # Setting -1 implies an infinite retry count. # Defaults to undef. # # [*database_retry_interval*] # (optional) Interval between retries of opening a database connection. # Defaults to undef. # # [*database_min_pool_size*] # (optional) Minimum number of SQL connections to keep open in a pool. # Defaults to: undef. # # [*database_max_pool_size*] # (optional) Maximum number of SQL connections to keep open in a pool. # Defaults to: undef. # # [*database_max_overflow*] # (optional) If set, use this value for max_overflow with sqlalchemy. # Defaults to: undef. # # [*single_tenant_mode*] # (optional) If set to true, will configure Trove to work in single # tenant mode. # Defaults to false. # # [*nova_compute_url*] # (optional) URL without the tenant segment. # Defaults to false. # # [*nova_proxy_admin_user*] # (optional) Admin username used to connect to nova. # Defaults to 'admin' # # [*nova_proxy_admin_pass*] # (required) Admin password used to connect to nova. # # [*nova_proxy_admin_tenant_name*] # (optional) Admin tenant name used to connect to nova. # Defaults to 'admin' # # [*rpc_response_timeout*] # (Optional) Seconds to wait for a response from a call. # Defaults to $::os_service_default # # [*control_exchange*] # (optional) Control exchange. # Defaults to 'trove'. # # [*cinder_url*] # (optional) Cinder URL without the tenant segment. # Defaults to false. # # [*swift_url*] # (optional) Swift URL ending in AUTH_. # Defaults to false. # # [*neutron_url*] # (optional) Neutron URL without the tenant segment. # Defaults to false. # # [*os_region_name*] # (optional) Sets the os_region_name flag. For environments with # more than one endpoint per service. If you don't set this and # you have multiple endpoints, you will get Ambiguous Endpoint # exceptions in the trove API service. # Defaults to undef. # # [*nova_compute_service_type*] # (optional) Nova service type to use when searching catalog. # Defaults to 'compute'. # # [*cinder_service_type*] # (optional) Cinder service type to use when searching catalog. # Defaults to 'volumev2'. # # [*swift_service_type*] # (optional) Swift service type to use when searching catalog. # Defaults to 'object-store'. # # [*neutron_service_type*] # (optional) Neutron service type to use when searching catalog. # Defaults to 'network'. # # [*glance_service_type*] # (optional) Glance service type to use when searching catalog. # Defaults to 'image'. # # [*nova_compute_endpoint_type*] # (optional) Service endpoint type to use when searching catalog. # Defaults to $::os_service_default # # [*neutron_endpoint_type*] # (optional) Service endpoint type to use when searching catalog. # Defaults to $::os_service_default # # [*cinder_endpoint_type*] # (optional) Service endpoint type to use when searching catalog. # Defaults to $::os_service_default # # [*swift_endpoint_type*] # (optional) Service endpoint type to use when searching catalog. # Defaults to $::os_service_default # # [*glance_endpoint_type*] # (optional) Service endpoint type to use when searching catalog. # Defaults to $::os_service_default # # [*trove_endpoint_type*] # (optional) Service endpoint type to use when searching catalog. # Defaults to $::os_service_default # # [*use_neutron*] # (optional) Use Neutron # Defaults to true # # [*default_neutron_networks*] # (optional) The network that trove will attach by default. # Defaults to undef. # # [*package_ensure*] # (optional) The state of the package. # Defaults to 'present' # class trove( $nova_proxy_admin_pass, $default_transport_url = $::os_service_default, $notification_transport_url = $::os_service_default, $notification_driver = $::os_service_default, $notification_topics = $::os_service_default, $rabbit_use_ssl = $::os_service_default, $rabbit_ha_queues = $::os_service_default, $rabbit_notification_topic = $::os_service_default, $rabbit_heartbeat_in_pthread = $::os_service_default, $kombu_ssl_ca_certs = $::os_service_default, $kombu_ssl_certfile = $::os_service_default, $kombu_ssl_keyfile = $::os_service_default, $kombu_ssl_version = $::os_service_default, $kombu_reconnect_delay = $::os_service_default, $kombu_failover_strategy = $::os_service_default, $amqp_durable_queues = $::os_service_default, $amqp_server_request_prefix = $::os_service_default, $amqp_broadcast_prefix = $::os_service_default, $amqp_group_request_prefix = $::os_service_default, $amqp_container_name = $::os_service_default, $amqp_idle_timeout = $::os_service_default, $amqp_trace = $::os_service_default, $amqp_ssl_ca_file = $::os_service_default, $amqp_ssl_cert_file = $::os_service_default, $amqp_ssl_key_file = $::os_service_default, $amqp_ssl_key_password = $::os_service_default, $amqp_allow_insecure_clients = $::os_service_default, $amqp_sasl_mechanisms = $::os_service_default, $amqp_sasl_config_dir = $::os_service_default, $amqp_sasl_config_name = $::os_service_default, $amqp_username = $::os_service_default, $amqp_password = $::os_service_default, $database_connection = undef, $database_idle_timeout = undef, $database_max_retries = undef, $database_retry_interval = undef, $database_min_pool_size = undef, $database_max_pool_size = undef, $database_max_overflow = undef, $single_tenant_mode = false, $nova_compute_url = false, $nova_proxy_admin_user = 'admin', $nova_proxy_admin_tenant_name = 'admin', $rpc_response_timeout = $::os_service_default, $control_exchange = 'trove', $cinder_url = false, $swift_url = false, $neutron_url = false, $os_region_name = undef, $nova_compute_service_type = 'compute', $cinder_service_type = 'volumev2', $swift_service_type = 'object-store', $neutron_service_type = 'network', $glance_service_type = 'image', $nova_compute_endpoint_type = $::os_service_default, $cinder_endpoint_type = $::os_service_default, $swift_endpoint_type = $::os_service_default, $glance_endpoint_type = $::os_service_default, $trove_endpoint_type = $::os_service_default, $neutron_endpoint_type = $::os_service_default, $use_neutron = true, $default_neutron_networks = $::os_service_default, $package_ensure = 'present', ) { include ::trove::deps include ::trove::policy include ::trove::params if $nova_compute_url { trove_config { 'DEFAULT/nova_compute_url': value => $nova_compute_url } } else { trove_config { 'DEFAULT/nova_compute_url': ensure => absent } } if $cinder_url { trove_config { 'DEFAULT/cinder_url': value => $cinder_url } } else { trove_config { 'DEFAULT/cinder_url': ensure => absent } } if $swift_url { trove_config { 'DEFAULT/swift_url': value => $swift_url } } else { trove_config { 'DEFAULT/swift_url': ensure => absent } } if $neutron_url { trove_config { 'DEFAULT/neutron_url': value => $neutron_url } } else { trove_config { 'DEFAULT/neutron_url': ensure => absent } } package { 'trove': ensure => $package_ensure, name => $::trove::params::common_package_name, tag => ['openstack', 'trove-package'], } }