This patch adds a command "image metadef object property show" which
describe a specific metadata definitions property inside an object.
Change-Id: I738e2e3c27c9819290d5a2a8781878b81f03b5f9
This patch adds a command "image metadef object update" which
update metadata definitions object inside a namespace.
Change-Id: I2dd8f54f9224abda5adc7a1b6a1c270c49d473a7
This was still using glanceclient-style calls despite us having switched
all image command to SDK way back in 5.2.0 (Ussuri). It therefore hasn't
worked since then, so we remove without deprecation.
Change-Id: Ibea79ea10bb272cba194debfe4bcbaeebf3875b7
Signed-off-by: Stephen Finucane <stephenfin@redhat.com>
This document is growing a bit too big now.
Change-Id: Iadf7f28d2307d1598e378bd49a09e75e1235d779
Signed-off-by: Stephen Finucane <stephenfin@redhat.com>
There are a few outstanding commands. Migrate them in one fell swoop. We
do lose a small bit of information about commands that are only
supported in block storage API version 2.0 or later, but who cares about
block storage API version 1.0 these days?
On a related note, we also use the 'openstack.volume.v3' entrypoint
rather than the v2 one since that's more relevant nowadays and the code
is pretty much identical.
Change-Id: Ide9d65596847d3f855981ff4ec57eeaeea6667a7
Signed-off-by: Stephen Finucane <stephenfin@redhat.com>
Supporting "--no-property" option will apply user a convenient way to
clean all properties of volume qos in a short command. The patch adds
"--no-property" option in "volume qos set" command and update related
test cases and docs.
Change-Id: I1fb5b4f0a923bbf557a3af3f63809bde9e84ffd4
This patch adds the ``block storage volume manageable list`` and
``block storage snapshot manageable list`` commands that
allow operators to list the volumes and snapshots on a
particular host or cluster for management under OpenStack.
Change-Id: I328dada5a0dc4e9e44c0d51db5cf3f224e27f88f
This patch adds the ``block storage cleanup`` command that
allow operators to cleanup resources (volumes and snapshots) with
failed operations by requesting services in other hosts in the
same cluster to cleanup resources of a failed service.
Change-Id: I1375223f525021db5201fa0a9f9a647d17dd01f7
This patch adds the ``block storage log level list`` and
``block storage log level set`` commands that allow
operators to list the current log levels of cinder services
and also enables them to set a particular log level.
Change-Id: I16cd8084fb505a9e68a35a936ef3b8b1f3cdc712
Network trunk commands originally were added to python-neutronclient,
although we can long consider these operations core Networking operations.
This patch is not a blind copy but also changes the original code to use
openstacksdk python bindings instead of the binding code in
python-neutronclient as that is already deprecated.
Change-Id: Ic4bc35c296a95d5dae92e9fc1cab3a3fa8f103cd
Related-Bug: #1999774
This patch adds the ``volume summary`` command which shows the total
size, total count and metadata of all volumes.
This command is available from microversion 3.12 and the metadata
info is available from microversion 3.36.
Change-Id: I6472337e8b1dc91aad5fbe416673a5d5a5d5fa88
These are based on the 'cinder list-filters' command, which accepts an
optional '--resource {resource}' option to limit the listed filters to a
single resource type.
block storage resource filter list
block storage resource filter show
We used the 'block storage resource filter' terminology rather than
simply 'resource filter' to highlight the fact that this is specific to
the block storage service.
Note that while this feature is a bit weird, good documentation can be
found at [1].
[1] https://docs.openstack.org/cinder/latest/admin/generalized_filters.html
Change-Id: I21e7c0ea427aef1f6665394d4b8e9a1f30d6dbb1
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
These mirror the 'cinder cluster-*' commands, with arguments copied
across essentially verbatim. The only significant departure is the
replacement of "tenant" terminology with "project".
block storage cluster list
block storage cluster set
block storage cluster show
We used the 'block storage' terminology rather than simply 'volume' to
allow us to start distinguishing between the volume service and a volume
resource.
Change-Id: I9105a9e4a139af4929e3b1f3a6de6c9a53e0b598
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
Only 'server migration list' was being documented.
Change-Id: I038ff2bcf7bb852d619004bb00306d2d388135a7
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
These mirror the 'cinder group-snapshot-*' commands, with arguments
copied across essentially verbatim. The only significant departure is
the replacement of "tenant" terminology with "project".
volume group snapshot create
volume group snapshot delete
volume group snapshot list
volume group snapshot show
Change-Id: Ia5084749b7c1a5a936fd6d6e8d89b9b80969f68c
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
Neutron has got CRUD API for L3 conntrack helper since some time.
This patch adds support for it in the OSC.
OpenStack SDK supports that since [1]
This patch also bumps minimum OpenStack SDK version to
the 0.56.0 as that version introduced support for the
Neutron's L3 conntrack helper.
[1] https://review.opendev.org/c/openstack/openstacksdk/+/782870
Change-Id: I55604182ae50b6ad70c8bc1f7efad8859f191269
These mirror the 'cinder group-type-*' commands, with arguments copied
across essentially verbatim. The only significant departure is the
merging of some commands, such as 'group-type-default' and
'group-type-list' into 'group type list', and 'group-type-update' and
'group-type-key' into 'group type set/unset'.
volume group type create
volume group type delete
volume group type list
volume group type show
volume group type set
volume group type unset
Change-Id: Iee6ee2f1f276e6ef6f75a74f8f2980f14c0d5e2f
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
These mirror the 'cinder group-*' commands, with arguments copied across
essentially verbatim. The only significant departures are the
replacement of "tenant" terminology with "project" and the merging of
the various volume group replication action commands into the parent
volume group (e.g. 'openstack volume group set --enable-replication'
instead of 'cinder group enable-replication')
volume group create
volume group delete
volume group list
volume group show
volume group set
volume group failover
Change-Id: I3b2c0cb92b8a53cc1c0cefa3313b80f59c9e5835
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
This patch implements the necessary commands to utilize the Messages API
introduced in Cinder API version 3.3. Version 3.5 built upon this by
implementing pagination support for these commands which is present in
this patch as well.
volume message get
volume message list
volume message delete
Change-Id: I64aa0b4a8d4468baa8c63e5e30ee31de68df999d
These mirror the 'cinder attachment-*' commands, with arguments copied
across essentially verbatim. The only significant departure is the
replacement of "tenant" terminology with "project".
volume attachment create
volume attachment delete
volume attachment list
volume attachment complete
volume attachment set
volume attachment show
Full support for filtering is deferred for now since that's a more
complicated change that requires additional commands be added first.
TODOs are included to this effect.
Change-Id: If47c2b56fe65ee2cee07c000d6ae3688d5ef3b42
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
New implementation of the project cleanup based on the sdk.project_cleanup.
It is implemented as an additional OSC operation and will ideally obsolete the
`openstack project purge` giving flexibility to extend services support,
parallelization, filters, etc.
Change-Id: Ie08877f182379f73e5ec5ad4daaf84b3092c829c
Add support for Neutron address group CRUD operations. Subsequent patches
will be added to use address groups in security group rules.
Change-Id: I3c313fc9329837dde67815901528a34dca98ebcc
Implements: blueprint address-groups-in-sg-rules
Depends-On: https://review.opendev.org/738274
Depends-On: https://review.opendev.org/745594
This change adds a new 'openstack server evacuate' command to provide
parity with the 'nova evacuate' command. The term "evacuate" is
notoriously poor, in that it implies the instance is moved rather than
recreated, but it is retained since people are familiar with it now.
Change-Id: I1e32ca51036c501862d8e89b3144a9695d98a06f
Add ``openstack server migration list`` to fetch server migrations.
Part of blueprint add-user-id-field-to-the-migrations-table
Change-Id: I15b4a5aca8d0dee59dd293e7b1c7272cdfbeea20
$namespace = openstack.image.v{1|2}
The subcommand documents for $namespace were hardcoded and thus prone to
drift over time. This commit removes the hardcoded content and uses the
autoprogram-cliff directive to generate them automatically from the
subcommand configuration classes.
Some reorganization happened here. The `image` subcommand name is shared
by image v1 and v2. Previously the hardcoded document had them combined
and interleaved. Attempting to preserve this with autoprogram-cliff
would have required significant additional infrastructure. However,
since most readers care completely about one and not at all about the
other, we instead split the v1 and v2 versions of these commands into
separate pages. In case links to the old pages exist in the wild, they
are preserved, but moved (with redirects) to a hidden directory, and
populated simply with links to the new version-specific generated
documents.
Change-Id: I24dc6dc10671c7f1267c27002542f61f8a3c18ae
$namespace = openstack.identity.v{2|3}
The subcommand documents for $namespace were hardcoded and thus prone to
drift over time. This commit removes the hardcoded content and uses the
autoprogram-cliff directive to generate them automatically from the
subcommand configuration classes.
Special things:
- Some reorganization happened here. Certain subcommand names, such as
`endpoint` and `project`, are shared by identify v2 and v3. Previously
the hardcoded documents had them combined and interleaved. Attempting
to preserve this with autoprogram-cliff would have required
significant additional infrastructure. However, since most readers
care completely about one and not at all about the other, we instead
split the v2 and v3 versions of these commands into separate pages. In
case links to the old pages exist in the wild, they are preserved, but
moved (with redirects) to a hidden directory, and populated simply
with links to the new version-specific generated documents.
- The `federation domain` and `federation project` subcommands were
previously absent from the docs. They are added. These are such small
commands and they seem related, so they're put into a single document.
- Some pages were already being generated but were listing operations
individually instead of using wildcards (possibly because they were
created before wildcarding was supported by cliff). These are changed
to use wildcarding. (We want to do this wherever possible as it is
more future-proof in the event that more operations are added to a
subcommand later.)
- The `service provider` document was incorrectly titled `identity
provider`. Fixed.
Change-Id: I2030f9fe370038c5908b6eb6bed9692a73fe5067
This patch adds the --immutable and --no-immutable option to the
role, project and domain CLI.
Related-Patch: https://review.opendev.org/#/c/712182/
Change-Id: I9c3bdd741f28bf558267fb217818d947597ce13e
This commit introduces the --access-rules option for 'application
credential create' as well as new 'access rule' commands for listing,
showing, and deleting access rules.
bp whitelist-extension-for-app-creds
Change-Id: I04834b2874ec2a70da456a380b5bef03a392effa
