This adds a --boot-from-volume option to the server create
command which is used with the --image or --image-property
option and will create a volume-backed server from the
specified image with the specified size. Similar to the
--volume option, the created root volume will not be deleted
when the server is deleted. The --boot-from-volume option
is not allowed with the --volume option since they both create
a block device mapping with boot_index=0.
Change-Id: I88c590361cb232c1df7b5bb010dcea307080d34c
Story: 2006302
Task: 36017
With compute API microversion 2.53 there is a single
PUT /os-services/{service_id} API which takes the service
id as a UUID. Since the openstack compute service set
command only takes --host and --service (binary) to identify
the service, this change checks if 2.53 or greater is being
used and if so, looks up the service by host and binary and
calls the appropriate methods in novaclient.
If the command cannot uniquely identify a compute service
with the given host and binary, an error is raised. A future
change could add an --id option to be used with 2.53+ to
pass the service id (as UUID) directly to avoid the host/binary
filtering.
Change-Id: I868e0868e8eb17e7e34eef3d2d58dceedd29c2b0
Story: 2005349
Task: 30302
These are currently exposed as flags on the 'openstack server resize'
command but they are in fact operation and should be exposed as commands
in their own right.
The old flag-based variants are deprecated for removal in 4.0.
Change-Id: I733796d3bda6c3755a3d3548bbe695abb474a6a0
Signed-off-by: Stephen Finucane <sfinucan@redhat.com>
The configuration show should not require auth to just display the
OSC config object. Changes to make it not require auth have
knock-on effects of needing to change a bunch of tests that use it
assuming it _does_ require auth so change those to use 'extension list'
instead.
This sets up further testing of the command line options for changes
in behaviour when we switch to straight SDK usage for configuration.
Change-Id: I6c52485341214ba401064c0f2d1e2b95fdc225c0
Signed-off-by: Dean Troyer <dtroyer@gmail.com>
neutron create-port API has extra_dhcp_opts parameter, this parameter
can set port with special extra dhcp options.
Change-Id: I199f17e95c509a33f809ac85c65f685a37acd198
Adds the --host and --hypervisor-hostname options to
``openstack server create`` CLI.
Depends-On: https://review.opendev.org/670558
Change-Id: If188c3d96fa506dbe62ef256418f2f9bca1520c2
Blueprint: add-host-and-hypervisor-hostname-flag-to-create-server
When adding a security group rule, if no IP address is given
we will use '0.0.0.0/0', but if the ethertype is IPv6 we will
leave it as None. Change this to be '::/0' to match what we
do for IPv4 - use the "any" address. The neutron server
treats them both the same when checking for duplicates.
Because there are most likely entries in the DB using None
for the IP, print them as '0.0.0.0/0' or '::/0' so it is more
obvious what address they are actually referring to.
Also change to display the Ethertype column by default
instead of with --long, since easily knowing IPv4 or IPv6
is useful.
Change-Id: Ic396fc23caa66b6b0034c5d30b27c6ed499de5a6
Closes-bug: #1735575
When the --name-lookup-one-by-one option passed to the 'server list'
command, the image and flavor names will be looked up for each
server being listed instead of fetching all image/flavor names.
The current code assumes all servers have an image attribute, but
servers booted from volumes have no image, so the following error is
raised when listing BFV servers with --name-lookup-one-by-one:
AttributeError: ('unicode'|'str') object has no attribute 'get'
The error occurs when the code attempts server.image.get('id').
This fixes the --name-lookup-one-by-one code not to assume an image
for a server. The unit tests for 'server list' have also been
robustified to feature one BFV server to enhance our test coverage.
Story: #2006063
Task: #34777
Change-Id: I312c971346c7ded93f6fcaa515098554b8580295
Related functional tests are converted into JSON format.
Otherwise, it is not easy to check results.
Partial-Bug: #1687955
Partially implement blueprint osc-formattable-columns
Change-Id: Ib82e15738544975fede0c54cc5eaf239f4c67277
This patch adds a new parameter ``--reason`` to ``openstack server lock``
command and ``--locked``, ``unlocked`` filtering parameters to
``openstack server list`` command. This can help users to provide a
reason when locking the server and to filter instances based on their
locked value from 2.73 microversion.
Implements blueprint add-locked-reason
Depends-On: https://review.opendev.org/#/c/661785/
Change-Id: Ib2714f98b24d47e570da8a6c231e765acd2ff595
Currently, doing a cold migration while specifying a target host is not
possible however nova api supports it since version 2.56.
This patch allows passing "--host" when doing a cold migration.
It runs normally if --os-compute-api-version is 2.56 or greater and
returns an error otherwise.
Change-Id: I960109008096ce8bb4e4c8ca6ffb22c33aacd995
Story: 2003325
Task: 24359
Per the discussion at the Train Forum [1] this deprecates
the problematic --live option on the server migrate command
which, depending on the compute API version used, forcefully
bypasses the scheduler and also does not allow you to live
migrate a server and let the scheduler pick a host.
The --live option is replaced here with two new options:
* --live-migration: this simply tells the command you want to
perform a live rather than cold migration; if specified with
--live the --live-migration option takes priority.
* --host: when specified, this will request a target host for
the live migration and will be validated by the scheduler;
if not specified, the scheduler will pick a host. This option
is mutually exclusive with --live.
We can build on the --host option by supporting cold migrations
with a specified host when using compute API version 2.56 or
greater but that will come in a separate change.
If the --live option is ever used we log a warning.
Note there are several related changes for this issue:
- https://review.openstack.org/#/c/628334/
- https://review.openstack.org/#/c/626949/
- https://review.openstack.org/#/c/627801/
- https://review.openstack.org/#/c/589012/
- https://review.openstack.org/#/c/460059/
This change allows us to deprecate the --live option and provide
a replacement which is backward compatible without having to use
something potentially error-prone like nargs='?'.
Closes-Bug: #1411190
[1] https://etherpad.openstack.org/p/DEN-osc-compute-api-gaps
Change-Id: I95d3d588e4abeb6848bdccf6915f7b5da40b5d4f
The following were deprecated over two years ago and can now be removed:
* Remove ``backup`` commands in favor of ``volume backup``
* Remove ``snapshot`` commands in favor of ``volume snapshot``
* Remove ``volume create`` options ``--project``, ``--user`` and ``--multi-attach``
* Use of an auth-key positional argument in volume transfers
* ``volume transfer request`` no longer accepts 'auth_key' as a positional arg,
``--auth-key`` is now required
Internal (non-user-visible)
* Rename backup.py to volume_backup.py for Volume v1 and v2, update tests
These are backwards incompatible changes and will require a major
version bump after they are merged.
Change-Id: I94aa7a9824e44f9585ffb45e5e7637b9588539b4
Signed-off-by: Sean McGinnis <sean.mcginnis@gmail.com>
Signed-off-by: Dean Troyer <dtroyer@gmail.com>
The following were deprecated for several releases and can now be
removed:
* Remove ``port create|set`` options ``--device-id`` and ``--port-id``
* Remove ``router set`` option ``--clear-routes``
* Remove ``security group rule create`` options ``--src-group`` and ``--src-ip``
These are backwards incompatible changes and will require a major
version bump after they are merged.
Change-Id: Ieae74c14f6b3e263721a3146cf76f94a9ab792f6
Signed-off-by: Sean McGinnis <sean.mcginnis@gmail.com>
Signed-off-by: Dean Troyer <dtroyer@gmail.com>
The following were deprecated over two years ago and can now be
removed/changed:
* Remove ``service create`` option ``--type``
* Remove ``role list`` options ``--project`` and ``--user``
* Remove ``user role list`` command
These are backwards incompatible changes and will require a major
version bump after they are merged.
Change-Id: I29e2fc9516dffbfd83eef0bc91e834dde99b4105
Signed-off-by: Sean McGinnis <sean.mcginnis@gmail.com>
Signed-off-by: Dean Troyer <dtroyer@gmail.com>
This patch adds functionality to configure server's description with:
1 server create
2 server set
3 server unset
4 server rebuild
Change-Id: Ic06d97b29e51828b29d7ac5172645c288e4ada9e
Story: 2002005
Task: 19640
There are many references to review.openstack.org, and while the
redirect should work, we can also go ahead and fix them.
Change-Id: I82e3797dd4c05e4944f40c950b4fafe9a5334cbf
test_shell.CLOUD_2 is using an absolute path for a temp
file, so leaves /tmp/test_log_file around after the unit
tests are run. Use a fixture instead so it's cleaned
automatically, which also removes the possibility of two
tests using the same file and interfering with each other.
Change-Id: If722b860be4010b91635c6d46f634da980e17152
Use cliff formattable columns not to convert complex fields
into a string when a machine readable format like JSON or YAML
is requested.
Partial-Bug: #1687955
Partially implement blueprint osc-formattable-columns
Change-Id: I9878f327e39f56852cc0fb6e4eee9105b7141da9
