solum/devstack/solum.conf.sample

[DEFAULT]

#
# From oslo.messaging
#

# Size of RPC connection pool. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
#rpc_conn_pool_size = 30

# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address. (string value)
#rpc_zmq_bind_address = *

# MatchMaker driver. (string value)
# Allowed values: redis, dummy
#rpc_zmq_matchmaker = redis

# Type of concurrency used. Either "native" or "eventlet" (string value)
#rpc_zmq_concurrency = eventlet

# Number of ZeroMQ contexts, defaults to 1. (integer value)
#rpc_zmq_contexts = 1

# Maximum number of ingress messages to locally buffer per topic. Default is
# unlimited. (integer value)
#rpc_zmq_topic_backlog = <None>

# Directory for holding IPC sockets. (string value)
#rpc_zmq_ipc_dir = /var/run/openstack

# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
# "host" option, if running Nova. (string value)
#rpc_zmq_host = localhost

# Seconds to wait before a cast expires (TTL). The default value of -1
# specifies an infinite linger period. The value of 0 specifies no linger
# period. Pending messages shall be discarded immediately when the socket is
# closed. Only supported by impl_zmq. (integer value)
#rpc_cast_timeout = -1

# The default number of seconds that poll should wait. Poll raises timeout
# exception when timeout expired. (integer value)
#rpc_poll_timeout = 1

# Expiration timeout in seconds of a name service record about existing target
# ( < 0 means no timeout). (integer value)
#zmq_target_expire = 120

# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
# value)
#use_pub_sub = true

# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
#rpc_zmq_min_port = 49152

# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
#rpc_zmq_max_port = 65536

# Number of retries to find free port number before fail with ZMQBindError.
# (integer value)
#rpc_zmq_bind_port_retries = 100

# Size of executor thread pool. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64

# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60

# A URL representing the messaging driver to use and its full configuration. If
# not set, we fall back to the rpc_backend option and driver specific
# configuration. (string value)
#transport_url = <None>

# The messaging driver to use, defaults to rabbit. Other drivers include amqp
# and zmq. (string value)
#rpc_backend = rabbit

# The default exchange under which topics are scoped. May be overridden by an
# exchange name specified in the transport_url option. (string value)
#control_exchange = openstack

#
# From solum.api.app
#

# Maximum raw byte size of a plan (integer value)
#max_plan_size = 65536

#
# From solum.api.auth
#

# This option enables or disables user authentication via keystone. Default
# value is True. (boolean value)
#enable_authentication = true

#
# From solum.api.release
#

# The current build of Solum. (string value)
#release = stackforge

#
# From solum.common.catalog
#

# The location the source code. (string value)
#source_path =

#
# From solum.common.clients
#

# Region of endpoint in Identity service catalog to use for all clients.
# (string value)
#region_name = RegionOne

#
# From solum.common.context
#

# Tenant id of global admin (string value)
#solum_admin_tenant_id =

#
# From solum.common.exception
#

# make exception message format errors fatal (boolean value)
#fatal_exception_format_errors = false

#
# From solum.common.solum_keystoneclient
#

# The keystone version to use with Solum (string value)
#keystone_version = 3

# Subset of trustor roles to be delegated to solum. (list value)
#trusts_delegated_roles = solum_assembly_update


[api]

#
# From solum.api.app
#

# The port for the solum API server (integer value)
#port = 9777

# The listen IP for the solum API server (string value)
#host = 127.0.0.1

# Maximum number of application allowed per tenant (integer value)
#max_apps_per_tenant = 10

#
# From solum.api.handlers.assembly_handler
#

# The format of the image to output (string value)
#image_format = qcow2

# The format of source repository (string value)
#source_format = heroku

# Comment phrase to trigger rebuilding (string value)
#rebuild_phrase = solum retry tests

#
# From solum.api.handlers.language_pack_handler
#

# Tenant id of the operator account used to create LPs (string value)
#operator_project_id =

#
# From solum.api.handlers.plan_handler
#

# Tells where to store system generated parameters, e.g. deploy keys for
# cloning a private repo. Options: database, barbican, local_file. Defaults to
# database (string value)
#system_param_store = database

# The local file to store system generated parameters when system_param_store
# is set to 'local_file' (string value)
#system_param_file = /etc/solum/secrets/git_secrets.db

#
# From solum.api.handlers.workflow_handler
#

# The format of the image to output (string value)
#image_format = qcow2

# The format of source repository (string value)
#source_format = heroku

# Comment phrase to trigger rebuilding (string value)
#rebuild_phrase = solum retry tests

# Application scale limit (integer value)
#max_instances_per_app = 100

#
# From solum.common.repo_utils
#

# Timeout value in seconds for sending http requests (integer value)
#http_request_timeout = 2


[barbican_client]

#
# From solum.common.clients
#

# If set, then the server's certificate for barbican will not be verified.
# (boolean value)
#insecure = false


[camp]

#
# From solum.api.controllers.root
#

# Enable/disable support for the OASIS CAMP API. Default value is True.
# (boolean value)
#camp_enabled = true


[conductor]

#
# From solum.conductor.config
#

# The queue to add conductor tasks to (string value)
#topic = solum-conductor

# The location of the conductor rpc queue (string value)
#host = localhost


[cors]

#
# From oslo.middleware.cors
#

# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. (list value)
#allowed_origin = <None>

# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true

# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers = Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma

# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600

# Indicate which methods can be used during the actual request. (list value)
#allow_methods = GET,POST,PUT,DELETE,OPTIONS

# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers = Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma


[cors.subdomain]

#
# From oslo.middleware.cors
#

# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. (list value)
#allowed_origin = <None>

# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true

# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers = Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma

# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600

# Indicate which methods can be used during the actual request. (list value)
#allow_methods = GET,POST,PUT,DELETE,OPTIONS

# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers = Content-Type,Cache-Control,Content-Language,Expires,Last-Modified,Pragma


[database]

#
# From oslo.db
#

# The file name to use with SQLite. (string value)
# Deprecated group/name - [DEFAULT]/sqlite_db
#sqlite_db = oslo.sqlite

# If True, SQLite uses synchronous mode. (boolean value)
# Deprecated group/name - [DEFAULT]/sqlite_synchronous
#sqlite_synchronous = true

# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy

# The SQLAlchemy connection string to use to connect to the database. (string
# value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>

# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>

# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set
# by the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL

# Timeout before idle SQL connections are reaped. (integer value)
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
#idle_timeout = 3600

# Minimum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
# Deprecated group/name - [DATABASE]/sql_min_pool_size
#min_pool_size = 1

# Maximum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
#max_pool_size = <None>

# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10

# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10

# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50

# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0

# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false

# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>

# Enable the experimental use of database reconnect on connection lost.
# (boolean value)
#use_db_reconnect = false

# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1

# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true

# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10

# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20

#
# From solum.objects
#

# The version of the schema that should be running: 'old', 'transition', 'new'
# (string value)
#schema_mode = new


[deployer]

#
# From solum.deployer.config
#

# The queue to add deployer tasks to (string value)
#topic = solum-deployer

# The location of the deployer rpc queue (string value)
#host = localhost

# The deployer endpoint to deploy (string value)
#handler = heat


[deployer]

#
# From solum.deployer.handlers.heat
#

# Number of attempts to query the Heat stack for finding out the status of the
# created stack and getting url of the DU created in the stack (integer value)
#max_attempts = 600

# Number of attempts to query the Docker DU for finding out the status of the
# created app and getting url of the DU created in the stack (integer value)
#du_attempts = 500

# Sleep time interval between two attempts of querying the Heat stack. This
# interval is in seconds. (integer value)
#wait_interval = 1

# Factor by which sleep time interval increases. This value should be >= 1.0
# (floating point value)
#growth_factor = 1.1

# VM Flavor (string value)
#flavor = m1.small

# Image id (string value)
#image = coreos

#keypairs name (string value)
#key_name = mykey

# Deployer logs location (string value)
#deployer_log_dir = /var/log/solum/deployer


[glance_client]

#
# From solum.common.clients
#

# Type of endpoint in Identity service catalog to use for communication with
# the Glance service. (string value)
#endpoint_type = publicURL

# Region of endpoint in Identity service catalog to use. (string value)
#region_name =


[heat_client]

#
# From solum.common.clients
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL

# Region of endpoint in Identity service catalog to use. (string value)
#region_name =

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false


[keystone_authtoken]

#
# From keystonemiddleware.auth_token
#

# Complete public Identity API endpoint. (string value)
#auth_uri = <None>

# API version of the admin Identity API endpoint. (string value)
#auth_version = <None>

# Do not handle authorization requests within the middleware, but delegate the
# authorization decision to downstream WSGI components. (boolean value)
#delay_auth_decision = false

# Request timeout value for communicating with Identity API server. (integer
# value)
#http_connect_timeout = <None>

# How many times are we trying to reconnect when communicating with Identity
# API Server. (integer value)
#http_request_max_retries = 3

# Env key for the swift cache. (string value)
#cache = <None>

# Required if identity server requires client certificate (string value)
#certfile = <None>

# Required if identity server requires client certificate (string value)
#keyfile = <None>

# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
# Defaults to system CAs. (string value)
#cafile = <None>

# Verify HTTPS connections. (boolean value)
#insecure = false

# The region in which the identity server can be found. (string value)
#region_name = <None>

# Directory used to cache files related to PKI tokens. (string value)
#signing_dir = <None>

# Optionally specify a list of memcached server(s) to use for caching. If left
# undefined, tokens will instead be cached in-process. (list value)
# Deprecated group/name - [DEFAULT]/memcache_servers
#memcached_servers = <None>

# In order to prevent excessive effort spent validating tokens, the middleware
# caches previously-seen tokens for a configurable duration (in seconds). Set
# to -1 to disable caching completely. (integer value)
#token_cache_time = 300

# Determines the frequency at which the list of revoked tokens is retrieved
# from the Identity service (in seconds). A high number of revocation events
# combined with a low cache duration may significantly reduce performance.
# (integer value)
#revocation_cache_time = 10

# (Optional) If defined, indicate whether token data should be authenticated or
# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
# cache. If the value is not one of these options or empty, auth_token will
# raise an exception on initialization. (string value)
# Allowed values: None, MAC, ENCRYPT
#memcache_security_strategy = None

# (Optional, mandatory if memcache_security_strategy is defined) This string is
# used for key derivation. (string value)
#memcache_secret_key = <None>

# (Optional) Number of seconds memcached server is considered dead before it is
# tried again. (integer value)
#memcache_pool_dead_retry = 300

# (Optional) Maximum total number of open connections to every memcached
# server. (integer value)
#memcache_pool_maxsize = 10

# (Optional) Socket timeout in seconds for communicating with a memcached
# server. (integer value)
#memcache_pool_socket_timeout = 3

# (Optional) Number of seconds a connection to memcached is held unused in the
# pool before it is closed. (integer value)
#memcache_pool_unused_timeout = 60

# (Optional) Number of seconds that an operation will wait to get a memcached
# client connection from the pool. (integer value)
#memcache_pool_conn_get_timeout = 10

# (Optional) Use the advanced (eventlet safe) memcached client pool. The
# advanced pool will only work under python 2.x. (boolean value)
#memcache_use_advanced_pool = false

# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
# middleware will not ask for service catalog on token validation and will not
# set the X-Service-Catalog header. (boolean value)
#include_service_catalog = true

# Used to control the use and type of token binding. Can be set to: "disabled"
# to not check token binding. "permissive" (default) to validate binding
# information if the bind type is of a form known to the server and ignore it
# if not. "strict" like "permissive" but if the bind type is unknown the token
# will be rejected. "required" any form of token binding is needed to be
# allowed. Finally the name of a binding method that must be present in tokens.
# (string value)
#enforce_token_bind = permissive

# If true, the revocation list will be checked for cached tokens. This requires
# that PKI tokens are configured on the identity server. (boolean value)
#check_revocations_for_cached = false

# Hash algorithms to use for hashing PKI tokens. This may be a single algorithm
# or multiple. The algorithms are those supported by Python standard
# hashlib.new(). The hashes will be tried in the order given, so put the
# preferred one first for performance. The result of the first hash will be
# stored in the cache. This will typically be set to multiple values only while
# migrating from a less secure algorithm to a more secure one. Once all the old
# tokens are expired this option should be set to a single value for better
# performance. (list value)
#hash_algorithms = md5

# Authentication type to load (unknown value)
# Deprecated group/name - [DEFAULT]/auth_plugin
#auth_type = <None>

# Config Section from which to load plugin specific options (unknown value)
#auth_section = <None>


[matchmaker_redis]

#
# From oslo.messaging
#

# Host to locate redis. (string value)
#host = 127.0.0.1

# Use this port to connect to redis host. (port value)
# Minimum value: 0
# Maximum value: 65535
#port = 6379

# Password for Redis server (optional). (string value)
#password =

# List of Redis Sentinel hosts (fault tolerance mode) e.g.
# [host:port, host1:port ... ] (list value)
#sentinel_hosts =

# Redis replica set name. (string value)
#sentinel_group_name = oslo-messaging-zeromq

# Time in ms to wait between connection attempts. (integer value)
#wait_timeout = 500

# Time in ms to wait before the transaction is killed. (integer value)
#check_timeout = 20000

# Timeout in ms on blocking socket operations (integer value)
#socket_timeout = 1000


[mistral_client]

#
# From solum.common.clients
#

# Type of endpoint in Identity service catalog to use for communication with
# the mistral service. (string value)
#endpoint_type = publicURL

# Region of endpoint in Identity service catalog to use. (string value)
#region_name =

# Optional CA cert file to use in SSL connections with Mistral. (string value)
#cacert = <None>

# If set the server certificate will not be verified while using Mistral.
# (boolean value)
#insecure = false


[neutron_client]

#
# From solum.common.clients
#

# Type of endpoint in Identity service catalog to use for communication with
# the Neutron service. (string value)
#endpoint_type = publicURL

# Region of endpoint in Identity service catalog to use. (string value)
#region_name =

# Optional CA bundle file to use in SSL connections. (string value)
#ca_cert = <None>

# If set, then the server's certificate for neutron will not be verified.
# (boolean value)
#insecure = false


[oslo_messaging_amqp]

#
# From oslo.messaging
#

# address prefix used when sending to a specific server (string value)
# Deprecated group/name - [amqp1]/server_request_prefix
#server_request_prefix = exclusive

# address prefix used when broadcasting to all servers (string value)
# Deprecated group/name - [amqp1]/broadcast_prefix
#broadcast_prefix = broadcast

# address prefix when sending to any server in group (string value)
# Deprecated group/name - [amqp1]/group_request_prefix
#group_request_prefix = unicast

# Name for the AMQP container (string value)
# Deprecated group/name - [amqp1]/container_name
#container_name = <None>

# Timeout for inactive connections (in seconds) (integer value)
# Deprecated group/name - [amqp1]/idle_timeout
#idle_timeout = 0

# Debug: dump AMQP frames to stdout (boolean value)
# Deprecated group/name - [amqp1]/trace
#trace = false

# CA certificate PEM file to verify server certificate (string value)
# Deprecated group/name - [amqp1]/ssl_ca_file
#ssl_ca_file =

# Identifying certificate PEM file to present to clients (string value)
# Deprecated group/name - [amqp1]/ssl_cert_file
#ssl_cert_file =

# Private key PEM file used to sign cert_file certificate (string value)
# Deprecated group/name - [amqp1]/ssl_key_file
#ssl_key_file =

# Password for decrypting ssl_key_file (if encrypted) (string value)
# Deprecated group/name - [amqp1]/ssl_key_password
#ssl_key_password = <None>

# Accept clients using either SSL or plain TCP (boolean value)
# Deprecated group/name - [amqp1]/allow_insecure_clients
#allow_insecure_clients = false

# Space separated list of acceptable SASL mechanisms (string value)
# Deprecated group/name - [amqp1]/sasl_mechanisms
#sasl_mechanisms =

# Path to directory that contains the SASL configuration (string value)
# Deprecated group/name - [amqp1]/sasl_config_dir
#sasl_config_dir =

# Name of configuration file (without .conf suffix) (string value)
# Deprecated group/name - [amqp1]/sasl_config_name
#sasl_config_name =

# User name for message broker authentication (string value)
# Deprecated group/name - [amqp1]/username
#username =

# Password for message broker authentication (string value)
# Deprecated group/name - [amqp1]/password
#password =


[oslo_messaging_notifications]

#
# From oslo.messaging
#

# The Drivers(s) to handle sending notifications. Possible values are
# messaging, messagingv2, routing, log, test, noop (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
#driver =

# A URL representing the messaging driver to use for notifications. If not set,
# we fall back to the same configuration used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
#transport_url = <None>

# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
#topics = notifications


[oslo_messaging_rabbit]

#
# From oslo.messaging
#

# Use durable queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_durable_queues
# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
#amqp_durable_queues = false

# Auto-delete queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_auto_delete
#amqp_auto_delete = false

# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_version
#kombu_ssl_version =

# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
#kombu_ssl_keyfile =

# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
#kombu_ssl_certfile =

# SSL certification authority file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
#kombu_ssl_ca_certs =

# How long to wait before reconnecting in response to an AMQP consumer cancel
# notification. (floating point value)
# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
#kombu_reconnect_delay = 1.0

# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
# be used. This option may notbe available in future versions. (string value)
#kombu_compression = <None>

# How long to wait a missing client beforce abandoning to send it its replies.
# This value should not be longer than rpc_response_timeout. (integer value)
# Deprecated group/name - [DEFAULT]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60

# Determines how the next RabbitMQ node is chosen in case the one we are
# currently connected to becomes unavailable. Takes effect only if more than
# one RabbitMQ node is provided in config. (string value)
# Allowed values: round-robin, shuffle
#kombu_failover_strategy = round-robin

# The RabbitMQ broker address where a single node is used. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_host
#rabbit_host = localhost

# The RabbitMQ broker port where a single node is used. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/rabbit_port
#rabbit_port = 5672

# RabbitMQ HA cluster host:port pairs. (list value)
# Deprecated group/name - [DEFAULT]/rabbit_hosts
#rabbit_hosts = $rabbit_host:$rabbit_port

# Connect over SSL for RabbitMQ. (boolean value)
# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
#rabbit_use_ssl = false

# The RabbitMQ userid. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_userid
#rabbit_userid = guest

# The RabbitMQ password. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_password
#rabbit_password = guest

# The RabbitMQ login method. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_login_method
#rabbit_login_method = AMQPLAIN

# The RabbitMQ virtual host. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
#rabbit_virtual_host = /

# How frequently to retry connecting with RabbitMQ. (integer value)
#rabbit_retry_interval = 1

# How long to backoff for between retries when connecting to RabbitMQ. (integer
# value)
# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
#rabbit_retry_backoff = 2

# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
# (integer value)
#rabbit_interval_max = 30

# Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry
# count). (integer value)
# Deprecated group/name - [DEFAULT]/rabbit_max_retries
#rabbit_max_retries = 0

# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
# is no longer controlled by the x-ha-policy argument when declaring a queue.
# If you just want to make sure that all queues (except  those with auto-
# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
#rabbit_ha_queues = false

# Positive integer representing duration in seconds for queue TTL (x-expires).
# Queues which are unused for the duration of the TTL are automatically
# deleted. The parameter affects only reply and fanout queues. (integer value)
# Minimum value: 1
#rabbit_transient_queues_ttl = 600

# Specifies the number of messages to prefetch. Setting to zero allows
# unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0

# Number of seconds after which the Rabbit broker is considered down if
# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
# value)
#heartbeat_timeout_threshold = 60

# How often times during the heartbeat_timeout_threshold we check the
# heartbeat. (integer value)
#heartbeat_rate = 2

# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
# Deprecated group/name - [DEFAULT]/fake_rabbit
#fake_rabbit = false

# Maximum number of channels to allow (integer value)
#channel_max = <None>

# The maximum byte size for an AMQP frame (integer value)
#frame_max = <None>

# How often to send heartbeats for consumer's connections (integer value)
#heartbeat_interval = 1

# Enable SSL (boolean value)
#ssl = <None>

# Arguments passed to ssl.wrap_socket (dict value)
#ssl_options = <None>

# Set socket timeout in seconds for connection's socket (floating point value)
#socket_timeout = 0.25

# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
# value)
#tcp_user_timeout = 0.25

# Set delay for reconnection to some host which has connection error (floating
# point value)
#host_connection_reconnect_delay = 0.25

# Maximum number of connections to keep queued. (integer value)
#pool_max_size = 10

# Maximum number of connections to create above `pool_max_size`. (integer
# value)
#pool_max_overflow = 0

# Default number of seconds to wait for a connections to available (integer
# value)
#pool_timeout = 30

# Lifetime of a connection (since creation) in seconds or None for no
# recycling. Expired connections are closed on acquire. (integer value)
#pool_recycle = 600

# Threshold at which inactive (since release) connections are considered stale
# in seconds or None for no staleness. Stale connections are closed on acquire.
# (integer value)
#pool_stale = 60

# Persist notification messages. (boolean value)
#notification_persistence = false

# Exchange name for for sending notifications (string value)
#default_notification_exchange = ${control_exchange}_notification

# Max number of not acknowledged message which RabbitMQ can send to
# notification listener. (integer value)
#notification_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# notification, -1 means infinite retry. (integer value)
#default_notification_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# notification message (floating point value)
#notification_retry_delay = 0.25

# Time to live for rpc queues without consumers in seconds. (integer value)
#rpc_queue_expiration = 60

# Exchange name for sending RPC messages (string value)
#default_rpc_exchange = ${control_exchange}_rpc

# Exchange name for receiving RPC replies (string value)
#rpc_reply_exchange = ${control_exchange}_rpc_reply

# Max number of not acknowledged message which RabbitMQ can send to rpc
# listener. (integer value)
#rpc_listener_prefetch_count = 100

# Max number of not acknowledged message which RabbitMQ can send to rpc reply
# listener. (integer value)
#rpc_reply_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# reply. -1 means infinite retry during rpc_timeout (integer value)
#rpc_reply_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# reply. (floating point value)
#rpc_reply_retry_delay = 0.25

# Reconnecting retry count in case of connectivity problem during sending RPC
# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
# request could be processed more then one time (integer value)
#default_rpc_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending RPC
# message (floating point value)
#rpc_retry_delay = 0.25


[swift_client]

#
# From solum.common.clients
#

# Type of endpoint in Identity service catalog to use for communication with
# the Swift service. (string value)
#endpoint_type = publicURL

# Region of endpoint in Identity service catalog to use. (string value)
#region_name =

# Optional CA cert file to use in SSL connections. (string value)
#cacert = <None>

# If set the server certificate will not be verified. (boolean value)
#insecure = false


[worker]

#
# From solum.worker.config
#

# The queue to add build tasks to (string value)
#topic = solum-worker

# The location of the build rpc queue (string value)
#host = localhost

# The worker endpoint to employ (string value)
#handler = shell

# The directory containing task log output. (string value)
#task_log_dir = /var/log/solum/worker

# The directory containing the project's code, especially the contrib
# directory. (string value)
#proj_dir =

# The prefix of test log URL to be sent back (string value)
#log_url_prefix = http://localhost/

# Upload task log to central storage, using modules like swift and local from
# solum/uploaders. (string value)
#log_upload_strategy = local

# The name of the Swift container to upload logs to. (string value)
#log_upload_swift_container = solum-logs

# The path of param files to save to. (string value)
#param_file_path = /tmp/solum

# Image storage backend. This includes images created for LanguagePacks and
# Deployment Units. Possible values are docker_registry, swift and glance.
# (string value)
#image_storage = glance

# Docker registry endpoint (string value)
#docker_reg_endpoint = 127.0.0.1

# Delete cached docker images and git repos from the worker node after building
# languagepacks and deployment units. Valid options are true or false. (string
# value)
#delete_local_cache = false

# Region name to use (string value)
#region_name = RegionOne

# Secret to use with temp url (string value)
#temp_url_secret = secret

# Protocol to use with temp url. Options are http/https (string value)
#temp_url_protocol = http

# TTL in seconds. (string value)
#temp_url_ttl = 604800

# url to the container where LPs are stored. (string value)
#lp_location_url =

# Options for downloading operator LPs.Possible values are "wget" or "swift-
# client" (string value)
#operator_lp_download_strategy = swift-client

# LP operator username. (string value)
#lp_operator_user = demo

# LP operator password. (string value)
#lp_operator_password = solum

# LP operator tenant name. (string value)
#lp_operator_tenant_name = demo

# docker daemon url. (string value)
#docker_daemon_url = unix://var/run/docker.sock

# max memory a container can consume. No limit by default (integer value)
#container_mem_limit = 0

# max time a docker build can take. Default: 30 minutes (integer value)
#docker_build_timeout = 1800


[zaqar_client]

#
# From solum.common.clients
#

# Type of endpoint in Queue service catalog to use for communication with the
# Zaqar service. (string value)
#endpoint_type = publicURL

# Region of endpoint in Identity service catalog to use. (string value)
#region_name =

# If set, then the server's certificate for zaqar will not be verified.
# (boolean value)
#insecure = false