Various doc formatting cleanups

* Get rid of a bunch of accidental blockquote formatting
* Always declare a lexer to use for ``.. code::`` blocks

Change-Id: I8940e75b094843e542e815dde6b6be4740751813

doc/source/admin_guide.rst

@@ -324,14 +324,14 @@ In order to prevent rsync replication to specific drives, firstly
 setup ``rsync_module`` per disk in your ``object-replicator``.
 Set this in ``object-server.conf``:
 
-.. code::
+.. code:: cfg
 
     [object-replicator]
     rsync_module = {replication_ip}::object_{device}
 
 Set the individual drives in ``rsync.conf``. For example:
 
-.. code::
+.. code:: cfg
 
     [object_sda]
     max connections = 4
@@ -387,7 +387,7 @@ monitoring solution to achieve this. The following is an example script:
 For the above script to work, ensure ``/etc/rsync.d/`` conf files are
 included, by specifying ``&include`` in your ``rsync.conf`` file:
 
-.. code::
+.. code:: cfg
 
     &include /etc/rsync.d
 
@@ -395,7 +395,7 @@ Use this in conjunction with a cron job to periodically run the script, for exam
 
 .. highlight:: none
 
-.. code::
+.. code:: cfg
 
     # /etc/cron.d/devicecheck
     * * * * * root /some/path/to/disable_rsync.py

doc/source/api/discoverability.rst

@@ -12,13 +12,13 @@ that does not support the ``/info`` request.
 To use the ``/info`` request, send a **GET** request using the ``/info``
 path to the Object Store endpoint as shown in this example:
 
-.. code::
+.. code:: console
 
     # curl https://storage.clouddrive.com/info
 
 This example shows a truncated response body:
 
-.. code::
+.. code:: console
 
     {
        "swift":{

doc/source/api/form_post_middleware.rst

@@ -29,9 +29,8 @@ The format of the form **POST** request is:
 
 **Example 1.14. Form POST format**
 
-.. code::
+.. code:: xml
 
-    <![CDATA[
     <form action="SWIFT_URL"
         method="POST"
         enctype="multipart/form-data">
@@ -44,7 +43,6 @@ The format of the form **POST** request is:
         <br/>
         <input type="submit"/>
     </form>
-    ]]>
 
 
 **action="SWIFT_URL"**
@@ -53,14 +51,14 @@ Set to full URL where the objects are to be uploaded. The names of
 uploaded files are appended to the specified *SWIFT_URL*. So, you
 can upload directly to the root of a container with a URL like:
 
-.. code::
+.. code:: none
 
     https://swift-cluster.example.com/v1/my_account/container/
 
 Optionally, you can include an object prefix to separate uploads, such
 as:
 
-.. code::
+.. code:: none
 
     https://swift-cluster.example.com/v1/my_account/container/OBJECT_PREFIX
 
@@ -123,7 +121,7 @@ follow the file attributes are ignored.
 
 Optionally, if you want the uploaded files to be temporary you can set x-delete-at or x-delete-after attributes by adding one of these as a form input:
 
-.. code::
+.. code:: xml
 
     <input type="hidden" name="x_delete_at" value="<unix-timestamp>" />
     <input type="hidden" name="x_delete_after" value="<seconds>" />
@@ -169,7 +167,7 @@ The following example code generates a signature for use with form
 
 **Example 1.15. HMAC-SHA1 signature for form POST**
 
-.. code::
+.. code:: python
 
     import hmac
     from hashlib import sha1
@@ -198,13 +196,13 @@ being uploaded is called ``flower.jpg``.
 This example uses the **swift-form-signature** script to compute the
 ``expires`` and ``signature`` values.
 
-.. code::
+.. code:: console
 
     $ bin/swift-form-signature /v1/my_account/container/photos/ https://example.com/done.html 5373952000 1 200 MYKEY
     Expires: 1390825338
     Signature: 35129416ebda2f1a21b3c2b8939850dfc63d8f43
 
-.. code::
+.. code:: console
 
     $ curl -i https://swift-cluster.example.com/v1/my_account/container/photos/ -X POST \
            -F max_file_size=5373952000 -F max_file_count=1 -F expires=1390825338 \

doc/source/api/large_objects.rst

@@ -82,7 +82,7 @@ This example shows three segment objects. You can use several containers
 and the object names do not have to conform to a specific pattern, in
 contrast to dynamic large objects.
 
-.. code::
+.. code:: json
 
     [
         {
@@ -192,7 +192,7 @@ manifest is still available to download the first set of segments.
 
 **Example Upload segment of large object request: HTTP**
 
-.. code::
+.. code:: none
 
     PUT /{api_version}/{account}/{container}/{object} HTTP/1.1
     Host: storage.clouddrive.com
@@ -214,7 +214,7 @@ uploading the manifest.
 
 **Example Upload next segment of large object request: HTTP**
 
-.. code::
+.. code:: none
 
     PUT /{api_version}/{account}/{container}/{object} HTTP/1.1
     Host: storage.clouddrive.com
@@ -232,7 +232,7 @@ subsequent additional segments.
 
 **Example Upload manifest request: HTTP**
 
-.. code::
+.. code:: none
 
     PUT /{api_version}/{account}/{container}/{object} HTTP/1.1
     Host: storage.clouddrive.com
@@ -244,7 +244,7 @@ subsequent additional segments.
 
 **Example Upload manifest response: HTTP**
 
-.. code::
+.. code:: none
 
     [...]
 

doc/source/api/object_api_v1_overview.rst

@@ -97,14 +97,14 @@ interact with the Object Storage API.
 Specifically, the resource path reflects this structure and has this
 format:
 
-.. code::
+.. code:: none
 
     /v1/{account}/{container}/{object}
 
 For example, for the ``flowers/rose.jpg`` object in the ``images``
 container in the ``12345678912345`` account, the resource path is:
 
-.. code::
+.. code:: none
 
     /v1/12345678912345/images/flowers/rose.jpg
 
@@ -133,7 +133,7 @@ parameter ``reverse``, noting that your marker and end_markers should be
 switched when applied to a reverse listing. I.e, for a list of objects
 ``[a, b, c, d, e]`` the non-reversed could be:
 
-.. code::
+.. code:: none
 
   /v1/{account}/{container}/?marker=a&end_marker=d
   b
@@ -141,7 +141,7 @@ switched when applied to a reverse listing. I.e, for a list of objects
 
 However, when reversed marker and end_marker are applied to a reversed list:
 
-.. code::
+.. code:: none
 
   /v1/{account}/{container}/?marker=d&end_marker=a&reverse=on
   c

doc/source/api/object_versioning.rst

@@ -48,11 +48,11 @@ Example Using ``X-Versions-Location``
 
 #. Create the ``current`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/current -X PUT -H "Content-Length: 0" -H "X-Auth-Token: $token" -H "X-Versions-Location: archive"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 201 Created
       Content-Length: 0
@@ -63,11 +63,11 @@ Example Using ``X-Versions-Location``
 
 #. Create the first version of an object in the ``current`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/current/my_object --data-binary 1 -X PUT -H "Content-Length: 0" -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 201 Created
       Last-Modified: Thu, 23 Jan 2014 21:31:22 GMT
@@ -85,7 +85,7 @@ Example Using ``X-Versions-Location``
 
    These non-current versions are named as follows:
 
-   .. code::
+   .. code:: none
 
       <length><object_name>/<timestamp>
 
@@ -96,11 +96,11 @@ Example Using ``X-Versions-Location``
 
 #. Create a second version of the object in the ``current`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/current/my_object --data-binary 2 -X PUT -H "Content-Length: 0" -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 201 Created
       Last-Modified: Thu, 23 Jan 2014 21:41:32 GMT
@@ -117,11 +117,11 @@ Example Using ``X-Versions-Location``
 
    List older versions of the object in the ``archive`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/archive?prefix=009my_object -X GET -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 200 OK
       Content-Length: 30
@@ -145,11 +145,11 @@ Example Using ``X-Versions-Location``
    current version of the object and replace it with the next-most
    current version in the non-current container.
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/current/my_object -X DELETE -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 204 No Content
       Content-Length: 0
@@ -161,11 +161,11 @@ Example Using ``X-Versions-Location``
    List objects in the ``archive`` container to show that the archived
    object was moved back to the ``current`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/archive?prefix=009my_object -X GET -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 204 No Content
       Content-Length: 0
@@ -187,11 +187,11 @@ Example Using ``X-History-Location``
 
 #. Create the ``current`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/current -X PUT -H "Content-Length: 0" -H "X-Auth-Token: $token" -H "X-History-Location: archive"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 201 Created
       Content-Length: 0
@@ -202,11 +202,11 @@ Example Using ``X-History-Location``
 
 #. Create the first version of an object in the ``current`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/current/my_object --data-binary 1 -X PUT -H "Content-Length: 0" -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 201 Created
       Last-Modified: Thu, 23 Jan 2014 21:31:22 GMT
@@ -224,7 +224,7 @@ Example Using ``X-History-Location``
 
    These non-current versions are named as follows:
 
-   .. code::
+   .. code:: none
 
       <length><object_name>/<timestamp>
 
@@ -235,11 +235,11 @@ Example Using ``X-History-Location``
 
 #. Create a second version of the object in the ``current`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/current/my_object --data-binary 2 -X PUT -H "Content-Length: 0" -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 201 Created
       Last-Modified: Thu, 23 Jan 2014 21:41:32 GMT
@@ -256,11 +256,11 @@ Example Using ``X-History-Location``
 
    List older versions of the object in the ``archive`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/archive?prefix=009my_object -X GET -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 200 OK
       Content-Length: 30
@@ -285,11 +285,11 @@ Example Using ``X-History-Location``
    the current container. Subsequent **GET** requests to the object in the
    current container will return ``404 Not Found``.
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/current/my_object -X DELETE -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 204 No Content
       Content-Length: 0
@@ -298,13 +298,13 @@ Example Using ``X-History-Location``
       X-Openstack-Request-Id: tx006d944e02494e229b8ee-0052e18edd
       Date: Thu, 23 Jan 2014 21:51:25 GMT
 
-   List older versions of the object in the ``archive`` container::
+   List older versions of the object in the ``archive`` container:
 
-   .. code::
+   .. code:: console
 
       # curl -i $publicURL/archive?prefix=009my_object -X GET -H "X-Auth-Token: $token"
 
-   .. code::
+   .. code:: console
 
       HTTP/1.1 200 OK
       Content-Length: 90
@@ -334,11 +334,11 @@ To disable object versioning for the ``current`` container, remove
 its ``X-Versions-Location`` metadata header by sending an empty key
 value.
 
-.. code::
+.. code:: console
 
    # curl -i $publicURL/current -X PUT -H "Content-Length: 0" -H "X-Auth-Token: $token" -H "X-Versions-Location: "
 
-.. code::
+.. code:: console
 
    HTTP/1.1 202 Accepted
    Content-Length: 76

doc/source/api/temporary_url_middleware.rst

@@ -21,11 +21,10 @@ a common prefix. They are useful for sharing a set of objects.
 Ask your cloud administrator to enable the temporary URL feature. For
 information, see :ref:`tempurl` in the *Source Documentation*.
 
-Note
+.. note::
-~~~~
 
-To use **POST** requests to upload objects to specific Object Storage
+   To use **POST** requests to upload objects to specific Object Storage
-locations, use :doc:`form_post_middleware` instead of temporary URL middleware.
+   locations, use :doc:`form_post_middleware` instead of temporary URL middleware.
 
 Temporary URL format
 ~~~~~~~~~~~~~~~~~~~~
@@ -35,7 +34,7 @@ parameters:
 
 **Example Temporary URL format**
 
-.. code::
+.. code:: none
 
    https://swift-cluster.example.com/v1/my_account/container/object
    ?temp_url_sig=732fcac368abb10c78a4cbe95c3fab7f311584532bf779abd5074e13cbe8b88b
@@ -71,7 +70,7 @@ A prefix-based temporary URL is similar but requires the parameter
 ``temp_url_prefix``, which must be equal to the common prefix shared
 by all object names for which the URL is valid.
 
-.. code::
+.. code:: none
 
    https://swift-cluster.example.com/v1/my_account/container/my_prefix/object
    ?temp_url_sig=732fcac368abb10c78a4cbe95c3fab7f311584532bf779abd5074e13cbe8b88b
@@ -109,15 +108,14 @@ The arbitrary values serve as the secret keys.
 For example, use the **swift post** command to set the secret key to
 *``MYKEY``*:
 
-.. code::
+.. code:: console
 
    $ swift post -m "Temp-URL-Key:MYKEY"
 
-Note
+.. note::
-~~~~
 
-Changing these headers invalidates any previously generated temporary
+   Changing these headers invalidates any previously generated temporary
-URLs within 60 seconds, which is the memcache time for the key.
+   URLs within 60 seconds, which is the memcache time for the key.
 
 HMAC signature for temporary URLs
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -145,7 +143,7 @@ temporary URLs:
 
 **Example HMAC-SHA256 signature for object-based temporary URLs**
 
-.. code::
+.. code:: python
 
    import hmac
    from hashlib import sha256
@@ -160,7 +158,7 @@ temporary URLs:
 
 **Example HMAC-SHA512 signature for prefix-based temporary URLs**
 
-.. code::
+.. code:: python
 
    import hmac
    from hashlib import sha512
@@ -186,7 +184,7 @@ Authentication <http://www.ietf.org/rfc/rfc2104.txt>`__.
 If you want to transform a UNIX timestamp into an ISO 8601 UTC timestamp,
 you can use following code snippet:
 
-.. code::
+.. code:: python
 
    import time
    time.strftime('%Y-%m-%dT%H:%M:%SZ', time.gmtime(timestamp))
@@ -198,7 +196,7 @@ The ``swift`` tool provides the  tempurl_ option that
 auto-generates the *``temp_url_sig``* and *``temp_url_expires``* query
 parameters. For example, you might run this command:
 
-.. code::
+.. code:: console
 
    $ swift tempurl GET 3600 /v1/my_account/container/object MYKEY
 
@@ -209,7 +207,7 @@ parameters. For example, you might run this command:
 
 This command returns the path:
 
-.. code::
+.. code:: none
 
    /v1/my_account/container/object
    ?temp_url_sig=5c4cc8886f36a9d0919d708ade98bf0cc71c9e91
@@ -219,7 +217,7 @@ To create the temporary URL, prefix this path with the Object Storage
 storage host name. For example, prefix the path with
 ``https://swift-cluster.example.com``, as follows:
 
-.. code::
+.. code:: none
 
    https://swift-cluster.example.com/v1/my_account/container/object
    ?temp_url_sig=5c4cc8886f36a9d0919d708ade98bf0cc71c9e91

doc/source/api/use_content-encoding_metadata.rst

@@ -12,7 +12,7 @@ underlying media type (``Content-Type``) of the file, such as a video.
 This example assigns an attachment type to the ``Content-Encoding``
 header that indicates how the file is downloaded:
 
-.. code::
+.. code:: none
 
    PUT /<api version>/<account>/<container>/<object> HTTP/1.1
    Host: storage.clouddrive.com

doc/source/api/use_the_content-disposition_metadata.rst

@@ -14,11 +14,11 @@ This example assigns an attachment type to the ``Content-Disposition``
 header. This attachment type indicates that the file is to be downloaded
 as ``goodbye.txt``:
 
-.. code::
+.. code:: console
 
    # curl -i  $publicURL/marktwain/goodbye -X POST -H "X-Auth-Token: $token" -H "Content-Length: 14" -H "Content-Type: application/octet-stream" -H "Content-Disposition: attachment; filename=goodbye.txt"
 
-.. code::
+.. code:: console
 
    HTTP/1.1 202 Accepted
    Content-Length: 76

doc/source/cors.rst

@@ -100,7 +100,7 @@ Test CORS Page
 A sample cross-site test page is located in the project source tree
 ``doc/source/test-cors.html``.
 
-     .. literalinclude:: test-cors.html
+.. literalinclude:: test-cors.html
 
 .. _CORS: https://developer.mozilla.org/en-US/docs/HTTP/Access_control_CORS
 .. _preflight request: https://developer.mozilla.org/en-US/docs/HTTP/Access_control_CORS#Preflighted_requests

doc/source/development_auth.rst

@@ -37,7 +37,7 @@ will be omitted.
 
 It is highly recommended that authentication server implementers prefix their
 tokens and Swift storage accounts they create with a configurable reseller
-prefix (`AUTH_` by default with the included TempAuth). This prefix will avoid
+prefix (``AUTH_`` by default with the included TempAuth). This prefix will avoid
 conflicts with other authentication servers that might be using the same
 Swift cluster. Otherwise, the Swift cluster will have to try all the resellers
 until one validates a token or all fail.
@@ -48,17 +48,17 @@ designations as you'll see later).
 
 Example Authentication with TempAuth:
 
-    * Token AUTH_tkabcd is given to the TempAuth middleware in a request's
+* Token AUTH_tkabcd is given to the TempAuth middleware in a request's
   X-Auth-Token header.
-    * The TempAuth middleware validates the token AUTH_tkabcd and discovers
+* The TempAuth middleware validates the token AUTH_tkabcd and discovers
   it matches the "tester" user within the "test" account for the storage
   account "AUTH_storage_xyz".
-    * The TempAuth middleware sets the REMOTE_USER to
+* The TempAuth middleware sets the REMOTE_USER to
   "test:tester,test,AUTH_storage_xyz"
-    * Now this user will have full access (via authorization procedures later)
+* Now this user will have full access (via authorization procedures later)
   to the AUTH_storage_xyz Swift storage account and access to containers in
   other storage accounts, provided the storage account begins with the same
-      `AUTH_` reseller prefix and the container has an ACL specifying at least
+  ``AUTH_`` reseller prefix and the container has an ACL specifying at least
   one of those three groups.
 
 Authorization is performed through callbacks by the Swift Proxy server to the

doc/source/development_ondisk_backends.rst

@@ -12,7 +12,7 @@ from the details of how data is laid out and stored on-disk.
 
 The APIs are documented in the reference implementations for all three
 servers. For historical reasons, the object server backend reference
-implementation module is named `diskfile`, while the account and container
+implementation module is named ``diskfile``, while the account and container
 server backend reference implementation modules are named appropriately.
 
 This API is still under development and not yet finalized.

doc/source/ops_runbook/diagnose.rst

@@ -36,10 +36,10 @@ External monitoring
 We use pingdom.com to monitor the external Swift API. We suggest the
 following:
 
-   -  Do a GET on ``/healthcheck``
+-  Do a GET on ``/healthcheck``
 
-   -  Create a container, make it public (x-container-read:
+-  Create a container, make it public (``x-container-read:
-      .r*,.rlistings), create a small file in the container; do a GET
+   .r*,.rlistings``), create a small file in the container; do a GET
    on the object
 
 Diagnose: General approach
@@ -82,11 +82,11 @@ if any servers are down. We suggest you run it regularly
 to the last report without having to wait for a long-running command
 to complete.
 
-Diagnose: Is system responding to /healthcheck?
+Diagnose: Is system responding to ``/healthcheck``?
------------------------------------------------
+---------------------------------------------------
 
 When you want to establish if a swift endpoint is running, run ``curl -k``
-against https://*[ENDPOINT]*/healthcheck.
+against ``https://$ENDPOINT/healthcheck``.
 
 .. _swift_logs:
 
@@ -209,11 +209,11 @@ Diagnose: Parted reports the backup GPT table is corrupt
 -  If a GPT table is broken, a message like the following should be
    observed when the following command is run:
 
-   .. code::
+   .. code:: console
 
       $ sudo parted -l
 
-   .. code::
+   .. code:: console
 
       Error: The backup GPT table is corrupt, but the primary appears OK,
       so that will be used.
@@ -232,40 +232,40 @@ invalid filesystem label. In such cases proceed as follows:
 
 #. Verify that the disk labels are correct:
 
-   .. code::
+   .. code:: console
 
-      FS=/dev/sd#1
+      $ FS=/dev/sd#1
 
-      sudo parted -l | grep object
+      $ sudo parted -l | grep object
 
 #. If partition labels are inconsistent then, resolve the disk label issues
    before proceeding:
 
-   .. code::
+   .. code:: console
 
-      sudo parted -s ${FS} name ${PART_NO} ${PART_NAME} #Partition Label
+      $ sudo parted -s ${FS} name ${PART_NO} ${PART_NAME} #Partition Label
-      #PART_NO is 1 for object disks and 3 for OS disks
+      $ # PART_NO is 1 for object disks and 3 for OS disks
-      #PART_NAME follows the convention seen in "sudo parted -l | grep object"
+      $ # PART_NAME follows the convention seen in "sudo parted -l | grep object"
 
 #. If the Filesystem label is missing then create it with care:
 
-   .. code::
+   .. code:: console
 
-      sudo xfs_admin -l ${FS} #Filesystem label (12 Char limit)
+      $ sudo xfs_admin -l ${FS} #Filesystem label (12 Char limit)
 
-      #Check for the existence of a FS label
+      $ # Check for the existence of a FS label
 
-      OBJNO=<3 Length Object No.>
+      $ OBJNO=<3 Length Object No.>
 
-      #I.E OBJNO for sw-stbaz3-object0007 would be 007
+      $ # I.E OBJNO for sw-stbaz3-object0007 would be 007
 
-      DISKNO=<3 Length Disk No.>
+      $ DISKNO=<3 Length Disk No.>
 
-      #I.E DISKNO for /dev/sdb would be 001, /dev/sdc would be 002 etc.
+      $ # I.E DISKNO for /dev/sdb would be 001, /dev/sdc would be 002 etc.
 
-      sudo xfs_admin -L "obj${OBJNO}dsk${DISKNO}" ${FS}
+      $ sudo xfs_admin -L "obj${OBJNO}dsk${DISKNO}" ${FS}
 
-      #Create a FS Label
+      $ # Create a FS Label
 
 Diagnose: Failed LUNs
 ---------------------
@@ -293,9 +293,9 @@ Otherwise the lun can be re-enabled as follows:
    LUN. You will come back later and grep this file for more details, but
    just generate it for now.
 
-   .. code::
+   .. code:: console
 
-      sudo hpssacli controller all diag file=/tmp/hpacu.diag ris=on xml=off zip=off
+      $ sudo hpssacli controller all diag file=/tmp/hpacu.diag ris=on xml=off zip=off
 
 Export the following variables using the below instructions before
 proceeding further.
@@ -304,16 +304,16 @@ proceeding further.
    failed drive's number and array value (example output: "array A
    logicaldrive 1..." would be exported as LDRIVE=1):
 
-   .. code::
+   .. code:: console
 
-      sudo hpssacli controller slot=1 ld all show
+      $ sudo hpssacli controller slot=1 ld all show
 
 #. Export the number of the logical drive that was retrieved from the
    previous command into the LDRIVE variable:
 
-   .. code::
+   .. code:: console
 
-      export LDRIVE=<LogicalDriveNumber>
+      $ export LDRIVE=<LogicalDriveNumber>
 
 #. Print the array value and Port:Box:Bay for all drives and take note of
    the Port:Box:Bay for the failed drive (example output: " array A
@@ -324,9 +324,9 @@ proceeding further.
    in the case of "array c"), but we will run a different command to be sure
    we are operating on the correct device.
 
-   .. code::
+   .. code:: console
 
-      sudo hpssacli controller slot=1 pd all show
+      $ sudo hpssacli controller slot=1 pd all show
 
 .. note::
 
@@ -339,24 +339,24 @@ proceeding further.
 
 #. Export the Port:Box:Bay for the failed drive into the PBOX variable:
 
-   .. code::
+   .. code:: console
 
-      export PBOX=<Port:Box:Bay>
+      $ export PBOX=<Port:Box:Bay>
 
 #. Print the physical device information and take note of the Disk Name
    (example output: "Disk Name: /dev/sdk" would be exported as
    DEV=/dev/sdk):
 
-   .. code::
+   .. code:: console
 
-      sudo hpssacli controller slot=1 ld ${LDRIVE} show detail | grep -i "Disk Name"
+      $ sudo hpssacli controller slot=1 ld ${LDRIVE} show detail | grep -i "Disk Name"
 
 #. Export the device name variable from the preceding command (example:
    /dev/sdk):
 
-   .. code::
+   .. code:: console
 
-      export DEV=<Device>
+      $ export DEV=<Device>
 
 #. Export the filesystem variable. Disks that are split between the
    operating system and data storage, typically sda and sdb, should  only
@@ -367,39 +367,39 @@ proceeding further.
    data filesystem for the device in question as the export. For example:
    /dev/sdk1.
 
-   .. code::
+   .. code:: console
 
-      export FS=<Filesystem>
+      $ export FS=<Filesystem>
 
 #. Verify the LUN is failed, and the device is not:
 
-   .. code::
+   .. code:: console
 
-      sudo hpssacli controller slot=1 ld all show
+      $ sudo hpssacli controller slot=1 ld all show
-      sudo hpssacli controller slot=1 pd all show
+      $ sudo hpssacli controller slot=1 pd all show
-      sudo hpssacli controller slot=1 ld ${LDRIVE} show detail
+      $ sudo hpssacli controller slot=1 ld ${LDRIVE} show detail
-      sudo hpssacli controller slot=1 pd ${PBOX} show detail
+      $ sudo hpssacli controller slot=1 pd ${PBOX} show detail
 
 #. Stop the swift and rsync service:
 
-   .. code::
+   .. code:: console
 
-      sudo service rsync stop
+      $ sudo service rsync stop
-      sudo swift-init shutdown all
+      $ sudo swift-init shutdown all
 
 #. Unmount the problem drive, fix the LUN and the filesystem:
 
-   .. code::
+   .. code:: console
 
-      sudo umount ${FS}
+      $ sudo umount ${FS}
 
 #. If umount fails, you should run lsof search for the mountpoint and
    kill any lingering processes before repeating the unpount:
 
-   .. code::
+   .. code:: console
 
-      sudo hpacucli controller slot=1 ld ${LDRIVE} modify reenable
+      $ sudo hpacucli controller slot=1 ld ${LDRIVE} modify reenable
-      sudo xfs_repair ${FS}
+      $ sudo xfs_repair ${FS}
 
 #. If the ``xfs_repair`` complains about possible journal data, use the
    ``xfs_repair -L`` option to zeroise the journal log.
@@ -407,21 +407,21 @@ proceeding further.
 #. Once complete test-mount the filesystem, and tidy up its lost and
    found area.
 
-   .. code::
+   .. code:: console
 
-      sudo mount ${FS} /mnt
+      $ sudo mount ${FS} /mnt
-      sudo rm -rf /mnt/lost+found/
+      $ sudo rm -rf /mnt/lost+found/
-      sudo umount /mnt
+      $ sudo umount /mnt
 
 #. Mount the filesystem and restart swift and rsync.
 
 #. Run the following to determine if a DC ticket is needed to check the
    cables on the node:
 
-   .. code::
+   .. code:: console
 
-      grep -y media.exchanged /tmp/hpacu.diag
+      $ grep -y media.exchanged /tmp/hpacu.diag
-      grep -y hot.plug.count /tmp/hpacu.diag
+      $ grep -y hot.plug.count /tmp/hpacu.diag
 
 #. If the output reports any non 0x00 values, it suggests that the cables
    should be checked. For example, log a DC ticket to check the sas cables
@@ -440,7 +440,7 @@ If the diagnostics report a message such as ``sda: drive is slow``, you
 should log onto the node and run the following command (remove ``-c 1`` option to continuously monitor
 the data):
 
-.. code::
+.. code:: console
 
    $ /usr/bin/collectl -s D -c 1
    waiting for 1 second sample...
@@ -475,7 +475,7 @@ otherwise hardware replacement is needed.
 
 Another way to look at the data is as follows:
 
-.. code::
+.. code:: console
 
    $ /opt/hp/syseng/disk-anal.pl -d
    Disk: sda  Wait: 54580 371  65  25  12   6   6   0   1   2   0  46
@@ -524,7 +524,7 @@ historical data. You can look at recent data as follows. It only looks
 at data from 13:15 to 14:15. As you can see, this is a relatively clean
 system (few if any long wait or service times):
 
-.. code::
+.. code:: console
 
    $ /opt/hp/syseng/disk-anal.pl -d -t 13:15-14:15
    Disk: sda  Wait:  3600   0   0   0   0   0   0   0   0   0   0   0
@@ -582,21 +582,21 @@ Running tests
 
 #. Prepare the ``target`` node as follows:
 
-   .. code::
+   .. code:: console
 
-      sudo iptables -I INPUT -p tcp -j ACCEPT
+      $ sudo iptables -I INPUT -p tcp -j ACCEPT
 
    Or, do:
 
-   .. code::
+   .. code:: console
 
-      sudo ufw allow 12866/tcp
+      $ sudo ufw allow 12866/tcp
 
 #. On the ``source`` node, run the following command to check
    throughput. Note the double-dash before the -P option.
    The command takes 10 seconds to complete. The ``target`` node is 192.168.245.5.
 
-   .. code::
+   .. code:: console
 
       $ netperf -H 192.168.245.5 -- -P 12866
       MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 12866 AF_INET to
@@ -609,7 +609,7 @@ Running tests
 
 #. On the ``source`` node, run the following command to check latency:
 
-   .. code::
+   .. code:: console
 
       $ netperf -H 192.168.245.5 -t TCP_RR -- -P 12866
       MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 12866
@@ -644,21 +644,21 @@ Diagnose: Remapping sectors experiencing UREs
 
 #. Set the environment variables SEC, DEV & FS, for example:
 
-   .. code::
+   .. code:: console
 
-      SEC=2930954256
+      $ SEC=2930954256
-      DEV=/dev/sdi
+      $ DEV=/dev/sdi
-      FS=/dev/sdi1
+      $ FS=/dev/sdi1
 
 #. Verify that the sector is bad:
 
-   .. code::
+   .. code:: console
 
-      sudo dd if=${DEV} of=/dev/null bs=512 count=1 skip=${SEC}
+      $ sudo dd if=${DEV} of=/dev/null bs=512 count=1 skip=${SEC}
 
 #. If the sector is bad this command will output an input/output error:
 
-   .. code::
+   .. code:: console
 
       dd: reading `/dev/sdi`: Input/output error
       0+0 records in
@@ -667,28 +667,28 @@ Diagnose: Remapping sectors experiencing UREs
 #. Prevent chef from attempting to re-mount the filesystem while the
    repair is in progress:
 
-   .. code::
+   .. code:: console
 
-      sudo mv /etc/chef/client.pem /etc/chef/xx-client.xx-pem
+      $ sudo mv /etc/chef/client.pem /etc/chef/xx-client.xx-pem
 
 #. Stop the swift and rsync service:
 
-   .. code::
+   .. code:: console
 
-      sudo service rsync stop
+      $ sudo service rsync stop
-      sudo swift-init shutdown all
+      $ sudo swift-init shutdown all
 
 #. Unmount the problem drive:
 
-   .. code::
+   .. code:: console
 
-      sudo umount ${FS}
+      $ sudo umount ${FS}
 
 #. Overwrite/remap the bad sector:
 
-   .. code::
+   .. code:: console
 
-      sudo dd_rescue -d -A -m8b -s ${SEC}b ${DEV} ${DEV}
+      $ sudo dd_rescue -d -A -m8b -s ${SEC}b ${DEV} ${DEV}
 
 #. This command should report an input/output error the first time
    it is run. Run the command a second time, if it successfully remapped
@@ -696,9 +696,9 @@ Diagnose: Remapping sectors experiencing UREs
 
 #. Verify the sector is now readable:
 
-   .. code::
+   .. code:: console
 
-      sudo dd if=${DEV} of=/dev/null bs=512 count=1 skip=${SEC}
+      $ sudo dd if=${DEV} of=/dev/null bs=512 count=1 skip=${SEC}
 
 #. If the sector is now readable this command should not report an
    input/output error.
@@ -706,24 +706,24 @@ Diagnose: Remapping sectors experiencing UREs
 #. If more than one problem sector is listed, set the SEC environment
    variable to the next sector in the list:
 
-   .. code::
+   .. code:: console
 
-      SEC=123456789
+      $ SEC=123456789
 
 #. Repeat from step 8.
 
 #. Repair the filesystem:
 
-   .. code::
+   .. code:: console
 
-      sudo xfs_repair ${FS}
+      $ sudo xfs_repair ${FS}
 
 #. If ``xfs_repair`` reports that the filesystem has valuable filesystem
    changes:
 
-   .. code::
+   .. code:: console
 
-      sudo xfs_repair ${FS}
+      $ sudo xfs_repair ${FS}
       Phase 1 - find and verify superblock...
       Phase 2 - using internal log
               - zero log...
@@ -739,11 +739,11 @@ Diagnose: Remapping sectors experiencing UREs
 #. You should attempt to mount the filesystem, and clear the lost+found
    area:
 
-   .. code::
+   .. code:: console
 
-      sudo mount $FS /mnt
+      $ sudo mount $FS /mnt
-      sudo rm -rf /mnt/lost+found/*
+      $ sudo rm -rf /mnt/lost+found/*
-      sudo umount /mnt
+      $ sudo umount /mnt
 
 #. If the filesystem fails to mount then you will need to use the
    ``xfs_repair -L`` option to force log zeroing.
@@ -752,16 +752,16 @@ Diagnose: Remapping sectors experiencing UREs
 #. If ``xfs_repair`` reports that an additional input/output error has been
    encountered, get the sector details as follows:
 
-   .. code::
+   .. code:: console
 
-      sudo grep "I/O error" /var/log/kern.log | grep sector | tail -1
+      $ sudo grep "I/O error" /var/log/kern.log | grep sector | tail -1
 
 #. If new input/output error is reported then set the SEC environment
    variable to the problem sector number:
 
-   .. code::
+   .. code:: console
 
-      SEC=234567890
+      $ SEC=234567890
 
 #. Repeat from step 8
 
@@ -806,31 +806,31 @@ errors, it may well indicate a cable, switch, or network issue.
 
 Get an overview of the interface with:
 
-.. code::
+.. code:: console
 
-   sudo ifconfig eth{n}
+   $ sudo ifconfig eth{n}
-   sudo ethtool eth{n}
+   $ sudo ethtool eth{n}
 
 The ``Link Detected:`` indicator will read ``yes`` if the nic is
 cabled.
 
 Establish the adapter type with:
 
-.. code::
+.. code:: console
 
-   sudo ethtool  -i eth{n}
+   $ sudo ethtool  -i eth{n}
 
 Gather the interface statistics with:
 
-.. code::
+.. code:: console
 
-   sudo ethtool  -S eth{n}
+   $ sudo ethtool  -S eth{n}
 
 If the nick supports self test, this can be performed with:
 
-.. code::
+.. code:: console
 
-   sudo ethtool  -t eth{n}
+   $ sudo ethtool  -t eth{n}
 
 Self tests should read ``PASS`` if the nic is operating correctly.
 
@@ -853,9 +853,9 @@ A replicator reports in its log that remaining time exceeds
 making progress. Another useful way to check this is with the
 'swift-recon -r' command on a swift proxy server:
 
-.. code::
+.. code:: console
 
-   sudo swift-recon -r
+   $ sudo swift-recon -r
    ===============================================================================
 
    --> Starting reconnaissance on 384 hosts
@@ -877,9 +877,9 @@ You can further check if the object replicator is stuck by logging on
 the object server and checking the object replicator progress with
 the following command:
 
-.. code::
+.. code:: console
 
-   #  sudo grep object-rep /var/log/swift/background.log | grep -e "Starting object replication" -e "Object replication complete" -e "partitions rep"
+   $ sudo grep object-rep /var/log/swift/background.log | grep -e "Starting object replication" -e "Object replication complete" -e "partitions rep"
    Jul 16 06:25:46 192.168.245.4 object-replicator 15344/16450 (93.28%) partitions replicated in 69018.48s (0.22/sec, 22h remaining)
    Jul 16 06:30:46 192.168.245.4object-replicator 15344/16450 (93.28%) partitions replicated in 69318.58s (0.22/sec, 22h remaining)
    Jul 16 06:35:46 192.168.245.4 object-replicator 15344/16450 (93.28%) partitions replicated in 69618.63s (0.22/sec, 23h remaining)
@@ -912,9 +912,9 @@ One of the reasons for the object replicator hanging like this is
 filesystem corruption on the drive. The following is a typical log entry
 of a corrupted filesystem detected by the object replicator:
 
-.. code::
+.. code:: console
 
-   # sudo bzgrep "Remote I/O error" /var/log/swift/background.log* |grep srv | - tail -1
+   $ sudo bzgrep "Remote I/O error" /var/log/swift/background.log* |grep srv | - tail -1
    Jul 12 03:33:30 192.168.245.4 object-replicator STDOUT: ERROR:root:Error hashing suffix#012Traceback (most recent call last):#012 File
    "/usr/lib/python2.7/dist-packages/swift/obj/replicator.py", line 199, in get_hashes#012 hashes[suffix] = hash_suffix(suffix_dir,
    reclaim_age)#012 File "/usr/lib/python2.7/dist-packages/swift/obj/replicator.py", line 84, in hash_suffix#012 path_contents =
@@ -922,9 +922,9 @@ of a corrupted filesystem detected by the object replicator:
 
 An ``ls`` of the problem file or directory usually shows something like the following:
 
-.. code::
+.. code:: console
 
-   # ls -l /srv/node/disk4/objects/1643763/b51
+   $ ls -l /srv/node/disk4/objects/1643763/b51
    ls: cannot access /srv/node/disk4/objects/1643763/b51: Remote I/O error
 
 If no entry with ``Remote I/O error`` occurs in the ``background.log`` it is
@@ -935,27 +935,27 @@ restart the object-replicator.
 
 #. Stop the object-replicator:
 
-   .. code::
+   .. code:: console
 
       # sudo swift-init object-replicator stop
 
 #. Make sure the object replicator has stopped, if it has hung, the stop
    command will not stop the hung process:
 
-   .. code::
+   .. code:: console
 
       # ps auxww | - grep swift-object-replicator
 
 #. If the previous ps shows the object-replicator is still running, kill
    the process:
 
-   .. code::
+   .. code:: console
 
       # kill -9 <pid-of-swift-object-replicator>
 
 #. Start the object-replicator:
 
-   .. code::
+   .. code:: console
 
       # sudo swift-init object-replicator start
 
@@ -964,14 +964,14 @@ to repair the problem filesystem.
 
 #. Stop swift and rsync:
 
-   .. code::
+   .. code:: console
 
       # sudo swift-init all shutdown
       # sudo service rsync stop
 
 #. Make sure all swift process have stopped:
 
-   .. code::
+   .. code:: console
 
       # ps auxww | grep swift | grep python
 
@@ -979,13 +979,13 @@ to repair the problem filesystem.
 
 #. Unmount the problem filesystem:
 
-   .. code::
+   .. code:: console
 
       # sudo umount /srv/node/disk4
 
 #. Repair the filesystem:
 
-   .. code::
+   .. code:: console
 
       # sudo xfs_repair -P /dev/sde1
 
@@ -1002,7 +1002,7 @@ The CPU load average on an object server, as shown with the
 'uptime' command, is typically under 10 when the server is
 lightly-moderately loaded:
 
-.. code::
+.. code:: console
 
    $ uptime
    07:59:26 up 99 days,  5:57,  1 user,  load average: 8.59, 8.39, 8.32
@@ -1014,7 +1014,7 @@ However, sometimes the CPU load average can increase significantly. The
 following is an example of an object server that has extremely high CPU
 load:
 
-.. code::
+.. code:: console
 
    $ uptime
    07:44:02 up 18:22,  1 user,  load average: 407.12, 406.36, 404.59
@@ -1050,9 +1050,9 @@ Further issues and resolutions
        given server.
      - Run this command:
 
-       .. code::
+       .. code:: console
 
-          sudo swift-init all start
+          $ sudo swift-init all start
 
        Examine messages in the swift log files to see if there are any
        error messages related to any of the swift processes since the time you
@@ -1080,9 +1080,9 @@ Further issues and resolutions
 
      - Restart the swift processes on the affected node:
 
-       .. code::
+       .. code:: console
 
-          % sudo swift-init all reload
+          $ sudo swift-init all reload
 
        Urgency:
                 If known performance problem: Immediate
@@ -1135,15 +1135,15 @@ Further issues and resolutions
        For example, it is running at 100 Mb/s and the NIC is a 1Ge NIC.
      - 1. Try resetting the interface with:
 
-       .. code::
+          .. code:: console
 
-          sudo ethtool -s eth0 speed 1000
+             $ sudo ethtool -s eth0 speed 1000
 
           ... and then run:
 
-       .. code::
+          .. code:: console
 
-          sudo lshw -class
+             $ sudo lshw -class
 
           See if size goes to the expected speed. Failing
           that, check hardware (NIC cable/switch port).
@@ -1183,9 +1183,11 @@ Further issues and resolutions
      - Urgency: Medium
        This may have been triggered by a recent restart of the  rsyslog daemon.
        Restart the service with:
-       .. code::
 
-          sudo swift-init <service> reload
+       .. code:: console
+
+          $ sudo swift-init <service> reload
+
    * - Object replicator: Reports the remaining time and that time is more than 100 hours.
      - Each replication cycle the object replicator writes a log message to its log
        reporting statistics about the current cycle. This includes an estimate for the
@@ -1193,9 +1195,10 @@ Further issues and resolutions
        100 hours, there is a problem with the replication process.
      - Urgency: Medium
        Restart the service with:
-       .. code::
 
-          sudo swift-init object-replicator reload
+       .. code:: console
+
+          $ sudo swift-init object-replicator reload
 
        Check that the remaining replication time is going down.
 

doc/source/ops_runbook/maintenance.rst

@@ -27,9 +27,9 @@ if you wait a while things get better.
 
 For example:
 
-.. code::
+.. code:: console
 
-   sudo swift-recon -rla
+   $ sudo swift-recon -rla
    ===============================================================================
    [2012-03-10 12:57:21] Checking async pendings on 384 hosts...
    Async stats: low: 0, high: 1, avg: 0, total: 1
@@ -52,7 +52,7 @@ system. Rules-of-thumb for 'good' recon output are:
 -  Nodes that respond are up and running Swift. If all nodes respond,
    that is a good sign. But some nodes may time out. For example:
 
-   .. code::
+   .. code:: console
 
       -> [http://<redacted>.29:6200/recon/load:] <urlopen error [Errno 111] ECONNREFUSED>
       -> [http://<redacted>.31:6200/recon/load:] <urlopen error timed out>
@@ -83,7 +83,7 @@ system. Rules-of-thumb for 'good' recon output are:
 For comparison here is the recon output for the same system above when
 two entire racks of Swift are down:
 
-.. code::
+.. code:: console
 
    [2012-03-10 16:56:33] Checking async pendings on 384 hosts...
    -> http://<redacted>.22:6200/recon/async: <urlopen error timed out>
@@ -152,9 +152,9 @@ Here is an example of noting and tracking down a problem with recon.
 
 Running reccon shows some async pendings:
 
-.. code::
+.. code:: console
 
-   bob@notso:~/swift-1.4.4/swift$ ssh -q <redacted>.132.7 sudo swift-recon -alr
+   $ ssh -q <redacted>.132.7 sudo swift-recon -alr
    ===============================================================================
    [2012-03-14 17:25:55] Checking async pendings on 384 hosts...
    Async stats: low: 0, high: 23, avg: 8, total: 3356
@@ -172,9 +172,9 @@ Why? Running recon again with -av swift (not shown here) tells us that
 the node with the highest (23) is <redacted>.72.61. Looking at the log
 files on <redacted>.72.61 we see:
 
-.. code::
+.. code:: console
 
-   souzab@<redacted>:~$ sudo tail -f /var/log/swift/background.log | - grep -i ERROR
+   $ sudo tail -f /var/log/swift/background.log | - grep -i ERROR
    Mar 14 17:28:06 <redacted> container-replicator ERROR Remote drive not mounted
    {'zone': 5, 'weight': 1952.0, 'ip': '<redacted>.204.119', 'id': 5481, 'meta': '', 'device': 'disk6', 'port': 6201}
    Mar 14 17:28:06 <redacted> container-replicator ERROR Remote drive not mounted
@@ -235,7 +235,7 @@ Procedure
    running the ring builder on a proxy node to determine which zones
    the storage nodes are in. For example:
 
-   .. code::
+   .. code:: console
 
       % sudo swift-ring-builder /etc/swift/object.builder
       /etc/swift/object.builder, build version 1467
@@ -258,7 +258,7 @@ Procedure
    builder again, this time with the ``list_parts`` option and specify
    the nodes under consideration. For example:
 
-   .. code::
+   .. code:: console
 
       % sudo swift-ring-builder /etc/swift/object.builder list_parts <redacted>.8 <redacted>.15 <redacted>.72.2
       Partition   Matches
@@ -283,7 +283,7 @@ Procedure
    small, and is proportional to the number of entries that have a 3 in
    the Matches column. For example:
 
-   .. code::
+   .. code:: console
 
       Partition   Matches
       26865          3
@@ -300,7 +300,7 @@ Procedure
 
 #. A quick way to count the number of rows with 3 matches is:
 
-   .. code::
+   .. code:: console
 
       % sudo swift-ring-builder /etc/swift/object.builder list_parts <redacted>.8 <redacted>.15 <redacted>.72.2 | grep "3$" | wc -l
 

doc/source/ops_runbook/procedures.rst

@@ -10,13 +10,13 @@ Fix broken GPT table (broken disk partition)
 -  If a GPT table is broken, a message like the following should be
    observed when the command...
 
-   .. code::
+   .. code:: console
 
       $ sudo parted -l
 
 -  ... is run.
 
-   .. code::
+   .. code:: console
 
       ...
       Error: The backup GPT table is corrupt, but the primary appears OK, so that will
@@ -25,13 +25,13 @@ Fix broken GPT table (broken disk partition)
 
 #. To fix this, firstly install the ``gdisk`` program to fix this:
 
-   .. code::
+   .. code:: console
 
       $ sudo aptitude install gdisk
 
 #. Run ``gdisk`` for the particular drive with the damaged partition:
 
-   .. code:
+   .. code: console
 
       $ sudo gdisk /dev/sd*a-l*
       GPT fdisk (gdisk) version 0.6.14
@@ -57,7 +57,7 @@ Fix broken GPT table (broken disk partition)
    and finally ``w`` (write table to disk and exit). Will also need to
    enter ``Y`` when prompted in order to confirm actions.
 
-   .. code::
+   .. code:: console
 
       Command (? for help): r
 
@@ -92,7 +92,7 @@ Fix broken GPT table (broken disk partition)
 
 #. Running the command:
 
-   .. code::
+   .. code:: console
 
       $ sudo parted /dev/sd#
 
@@ -100,7 +100,7 @@ Fix broken GPT table (broken disk partition)
 
 #. Finally, uninstall ``gdisk`` from the node:
 
-   .. code::
+   .. code:: console
 
       $ sudo aptitude remove gdisk
 
@@ -112,7 +112,7 @@ Procedure: Fix broken XFS filesystem
 #. A filesystem may be corrupt or broken if the following output is
    observed when checking its label:
 
-   .. code::
+   .. code:: console
 
       $ sudo xfs_admin -l /dev/sd#
       cache_node_purge: refcount was 1, not zero (node=0x25d5ee0)
@@ -125,7 +125,7 @@ Procedure: Fix broken XFS filesystem
 #. Run the following commands to remove the broken/corrupt filesystem and replace.
    (This example uses the filesystem ``/dev/sdb2``) Firstly need to replace the partition:
 
-   .. code::
+   .. code:: console
 
       $ sudo parted
       GNU Parted 2.3
@@ -167,7 +167,7 @@ Procedure: Fix broken XFS filesystem
 
 #. Next step is to scrub the filesystem and format:
 
-   .. code::
+   .. code:: console
 
       $ sudo dd if=/dev/zero of=/dev/sdb2 bs=$((1024*1024)) count=1
       1+0 records in
@@ -187,7 +187,7 @@ Procedure: Fix broken XFS filesystem
 
 #. Can now check to see if the filesystem is mounted using the command:
 
-   .. code::
+   .. code:: console
 
       $ mount
 
@@ -204,7 +204,7 @@ Procedure: Checking if an account is okay
 
 You must know the tenant/project ID. You can check if the account is okay as follows from a proxy.
 
-.. code::
+.. code:: console
 
    $ sudo -u swift  /opt/hp/swift/bin/swift-direct show AUTH_<project-id>
 
@@ -214,7 +214,7 @@ containers, or an error indicating that the resource could not be found.
 Alternatively, you can use ``swift-get-nodes`` to find the account database
 files. Run the following on a proxy:
 
-.. code::
+.. code:: console
 
    $ sudo swift-get-nodes /etc/swift/account.ring.gz  AUTH_<project-id>
 
@@ -239,7 +239,7 @@ Log onto one of the swift proxy servers.
 
 Use swift-direct to show this accounts usage:
 
-.. code::
+.. code:: console
 
    $ sudo -u swift /opt/hp/swift/bin/swift-direct show AUTH_<project-id>
    Status: 200
@@ -288,7 +288,7 @@ re-create the account as follows:
    servers). The output has been truncated so we can focus on the import pieces
    of data:
 
-   .. code::
+   .. code:: console
 
        $ sudo swift-get-nodes /etc/swift/account.ring.gz AUTH_4ebe3039674d4864a11fe0864ae4d905
        ...
@@ -308,7 +308,7 @@ re-create the account as follows:
 #. Before proceeding check that the account is really deleted by using curl. Execute the
    commands printed by ``swift-get-nodes``. For example:
 
-   .. code::
+   .. code:: console
 
        $ curl -I -XHEAD "http://192.168.245.5:6202/disk1/3934/AUTH_4ebe3039674d4864a11fe0864ae4d905"
        HTTP/1.1 404 Not Found
@@ -323,7 +323,7 @@ re-create the account as follows:
 #. Use the ssh commands printed by ``swift-get-nodes`` to check if database
    files exist. For example:
 
-   .. code::
+   .. code:: console
 
        $  ssh 192.168.245.5 "ls -lah ${DEVICE:-/srv/node*}/disk1/accounts/3934/052/f5ecf8b40de3e1b0adb0dbe576874052"
        total 20K
@@ -344,7 +344,7 @@ re-create the account as follows:
 
 #. Delete the database files. For example:
 
-   .. code::
+   .. code:: console
 
        $ ssh 192.168.245.5
        $ cd /srv/node/disk1/accounts/3934/052/f5ecf8b40de3e1b0adb0dbe576874052
@@ -374,9 +374,9 @@ balancers, customer's are not impacted by the misbehaving proxy.
 
 #. Shut down Swift as follows:
 
-   .. code::
+   .. code:: console
 
-      sudo swift-init proxy shutdown
+      $ sudo swift-init proxy shutdown
 
    .. note::
 
@@ -384,15 +384,15 @@ balancers, customer's are not impacted by the misbehaving proxy.
 
 #. Create the ``/etc/swift/disabled-by-file`` file. For example:
 
-   .. code::
+   .. code:: console
 
-      sudo touch /etc/swift/disabled-by-file
+      $ sudo touch /etc/swift/disabled-by-file
 
 #. Optional, restart Swift:
 
-   .. code::
+   .. code:: console
 
-      sudo swift-init proxy start
+      $ sudo swift-init proxy start
 
 It works because the healthcheck middleware looks for /etc/swift/disabled-by-file.
 If it exists, the middleware will return 503/error instead of 200/OK. This means the load balancer
@@ -403,9 +403,9 @@ Procedure: Ad-Hoc disk performance test
 
 You can get an idea whether a disk drive is performing as follows:
 
-.. code::
+.. code:: console
 
-   sudo dd bs=1M count=256 if=/dev/zero conv=fdatasync of=/srv/node/disk11/remember-to-delete-this-later
+   $ sudo dd bs=1M count=256 if=/dev/zero conv=fdatasync of=/srv/node/disk11/remember-to-delete-this-later
 
 You can expect ~600MB/sec. If you get a low number, repeat many times as
 Swift itself may also read or write to the disk, hence giving a lower

doc/source/ops_runbook/troubleshooting.rst

@@ -16,7 +16,7 @@ transactions from this user. The linux ``bzgrep`` command can be used to
 search all the proxy log files on a node including the ``.bz2`` compressed
 files. For example:
 
-.. code::
+.. code:: console
 
    $ PDSH_SSH_ARGS_APPEND="-o StrictHostKeyChecking=no" pdsh -l <yourusername> -R ssh \
      -w <redacted>.68.[4-11,132-139 4-11,132-139],<redacted>.132.[4-11,132-139] \
@@ -40,7 +40,7 @@ This shows a ``GET`` operation on the users account.
 Using the transaction ID, ``tx429fc3be354f434ab7f9c6c4206c1dc3`` you can
 search the swift object servers log files for this transaction ID:
 
-.. code::
+.. code:: console
 
    $ PDSH_SSH_ARGS_APPEND="-o StrictHostKeyChecking=no" pdsh -l <yourusername> -R ssh \
      -w <redacted>.72.[4-67|4-67],<redacted>.[4-67|4-67],<redacted>.[4-67|4-67],<redacted>.204.[4-131] \
@@ -79,7 +79,7 @@ search the swift object servers log files for this transaction ID:
 Next, use the ``swift-get-nodes`` command to determine exactly where the
 user's account data is stored:
 
-.. code::
+.. code:: console
 
    $ sudo swift-get-nodes /etc/swift/account.ring.gz AUTH_redacted-4962-4692-98fb-52ddda82a5af
    Account AUTH_redacted-4962-4692-98fb-52ddda82a5af
@@ -119,7 +119,7 @@ user's account data is stored:
 Check each of the primary servers, <redacted>.31, <redacted>.204.70  and <redacted>.72.16, for
 this users account. For example on <redacted>.72.16:
 
-.. code::
+.. code:: console
 
    $ ls -lah /srv/node/disk9/accounts/198875/696/1846d99185f8a0edaf65cfbf37439696/
    total 1.0M
@@ -131,7 +131,7 @@ this users account. For example on <redacted>.72.16:
 So this users account db, an sqlite db is present. Use sqlite to
 checkout the account:
 
-.. code::
+.. code:: console
 
    $ sudo cp /srv/node/disk9/accounts/198875/696/1846d99185f8a0edaf65cfbf37439696/1846d99185f8a0edaf65cfbf37439696.db /tmp
    $ sudo sqlite3 /tmp/1846d99185f8a0edaf65cfbf37439696.db
@@ -156,7 +156,7 @@ checkout the account:
    why the GET operations are returning 404, not found. Check the account
    delete date/time:
 
-   .. code::
+   .. code:: console
 
       $ python
 
@@ -167,7 +167,7 @@ checkout the account:
 Next try and find the ``DELETE`` operation for this account in the proxy
 server logs:
 
-.. code::
+.. code:: console
 
    $ PDSH_SSH_ARGS_APPEND="-o StrictHostKeyChecking=no" pdsh -l <yourusername> -R ssh \
      -w <redacted>.68.[4-11,132-139 4-11,132-139],<redacted>.132.[4-11,132-139|4-11,132-139] \
@@ -206,7 +206,7 @@ as follows:
 
 Examine the object in question:
 
-.. code::
+.. code:: console
 
    $ sudo -u swift /opt/hp/swift/bin/swift-direct head 132345678912345 container_name obj_name
 
@@ -219,14 +219,14 @@ name of the objects this means it is a DLO. For example,
 if ``X-Object-Manifest`` is ``container2/seg-blah``, list the contents
 of the container container2 as follows:
 
-.. code::
+.. code:: console
 
    $ sudo -u swift /opt/hp/swift/bin/swift-direct show 132345678912345 container2
 
 Pick out the objects whose names start with ``seg-blah``.
 Delete the segment objects as follows:
 
-.. code::
+.. code:: console
 
    $ sudo -u swift /opt/hp/swift/bin/swift-direct delete 132345678912345 container2 seg-blah01
    $ sudo -u swift /opt/hp/swift/bin/swift-direct delete 132345678912345 container2 seg-blah02

doc/source/policies_saio.rst

@@ -22,7 +22,9 @@ to understand and adding a bunch of new devices isn't really required
 to implement a usable set of policies.
 
 1. To define your policies, add the following to your ``/etc/swift/swift.conf``
-   file::
+   file:
+
+   .. code:: ini
 
       [storage-policy:0]
       name = gold
@@ -37,7 +39,9 @@ to implement a usable set of policies.
 
 2. To create the object ring for the silver policy (index 1), add the following
    to your ``bin/remakerings`` script and re-run it (your script may already have
-   these changes)::
+   these changes):
+
+   .. code:: shell
 
       swift-ring-builder object-1.builder create 10 2 1
       swift-ring-builder object-1.builder add r1z1-127.0.0.1:6210/sdb1 1
@@ -51,7 +55,9 @@ to implement a usable set of policies.
    and is not specified  in ``/etc/swift/swift.conf``.
 
 3. Copy ``etc/container-reconciler.conf-sample`` to
-   ``/etc/swift/container-reconciler.conf`` and fix the user option::
+   ``/etc/swift/container-reconciler.conf`` and fix the user option:
+
+   .. code:: shell
 
       cp etc/container-reconciler.conf-sample /etc/swift/container-reconciler.conf
       sed -i "s/# user.*/user = $USER/g" /etc/swift/container-reconciler.conf
@@ -68,7 +74,9 @@ Storage Policies effect placement of data in Swift.
 1. We will be using the list_endpoints middleware to confirm object locations,
    so enable that now in your ``proxy-server.conf`` file by adding it to the pipeline
    and including the filter section as shown below (be sure to restart your proxy
-   after making these changes)::
+   after making these changes):
+
+   .. code:: ini
 
       pipeline = catch_errors gatekeeper healthcheck proxy-logging cache bulk \
         slo dlo ratelimit crossdomain list-endpoints tempurl tempauth staticweb \
@@ -77,35 +85,47 @@ Storage Policies effect placement of data in Swift.
       [filter:list-endpoints]
       use = egg:swift#list_endpoints
 
-2. Check to see that your policies are reported via /info::
+2. Check to see that your policies are reported via /info:
+
+   .. code:: shell
 
       swift -A http://127.0.0.1:8080/auth/v1.0 -U test:tester -K testing info
 
-  You should see this: (only showing the policy output here)::
+   You should see this: (only showing the policy output here):
+
+   .. code:: none
 
       policies: [{'aliases': 'gold, yellow, orange', 'default': True,
           'name': 'gold'}, {'aliases': 'silver', 'name': 'silver'}]
 
 3. Now create a container without specifying a policy, it will use the
    default, 'gold' and then put a test object in it (create the file ``file0.txt``
-   with your favorite editor with some content)::
+   with your favorite editor with some content):
+
+   .. code:: shell
 
       curl -v -X PUT -H 'X-Auth-Token: <your auth token>' \
           http://127.0.0.1:8080/v1/AUTH_test/myCont0
       curl -X PUT -v -T file0.txt -H 'X-Auth-Token: <your auth token>' \
           http://127.0.0.1:8080/v1/AUTH_test/myCont0/file0.txt
 
-4. Now confirm placement of the object with the :ref:`list_endpoints` middleware::
+4. Now confirm placement of the object with the :ref:`list_endpoints` middleware:
+
+   .. code:: shell
 
       curl -X GET -v http://127.0.0.1:8080/endpoints/AUTH_test/myCont0/file0.txt
 
-  You should see this: (note placement on expected devices)::
+   You should see this: (note placement on expected devices):
+
+   .. code:: json
 
       ["http://127.0.0.1:6230/sdb3/761/AUTH_test/myCont0/file0.txt",
        "http://127.0.0.1:6210/sdb1/761/AUTH_test/myCont0/file0.txt",
        "http://127.0.0.1:6220/sdb2/761/AUTH_test/myCont0/file0.txt"]
 
-5. Create a container using policy 'silver' and put a different file in it::
+5. Create a container using policy 'silver' and put a different file in it:
+
+   .. code:: shell
 
       curl -v -X PUT -H 'X-Auth-Token: <your auth token>' -H \
           "X-Storage-Policy: silver" \
@@ -113,24 +133,32 @@ Storage Policies effect placement of data in Swift.
       curl -X PUT -v -T file1.txt -H 'X-Auth-Token: <your auth token>' \
           http://127.0.0.1:8080/v1/AUTH_test/myCont1/
 
-6. Confirm placement of the object for policy 'silver'::
+6. Confirm placement of the object for policy 'silver':
+
+   .. code:: shell
 
       curl -X GET -v http://127.0.0.1:8080/endpoints/AUTH_test/myCont1/file1.txt
 
-  You should see this: (note placement on expected devices)::
+   You should see this: (note placement on expected devices):
+
+   .. code:: json
 
       ["http://127.0.0.1:6210/sdb1/32/AUTH_test/myCont1/file1.txt",
        "http://127.0.0.1:6240/sdb4/32/AUTH_test/myCont1/file1.txt"]
 
 7. Confirm account information with HEAD, make sure that your container-updater
    service is running and has executed once since you performed the PUTs or the
-   account database won't be updated yet::
+   account database won't be updated yet:
+
+   .. code:: shell
 
       curl -i -X HEAD -H 'X-Auth-Token: <your auth token>' \
           http://127.0.0.1:8080/v1/AUTH_test
 
    You should see something like this (note that total and per policy stats
-  object sizes will vary)::
+   object sizes will vary):
+
+   .. code:: none
 
       HTTP/1.1 204 No Content
       Content-Length: 0

swift/common/middleware/crypto/decrypter.py

@@ -92,7 +92,7 @@ class BaseDecrypterContext(CryptoWSGIContext):
         the value itself, otherwise return the value unmodified.
 
         A value should either be a string that does not contain the ';'
-        character or should be of the form:
+        character or should be of the form::
 
             <base64-encoded ciphertext>;swift_meta=<crypto meta>
 

swift/common/ring/builder.py

@@ -178,7 +178,7 @@ class RingBuilder(object):
     @contextmanager
     def debug(self):
         """
-        Temporarily enables debug logging, useful in tests, e.g.
+        Temporarily enables debug logging, useful in tests, e.g.::
 
             with rb.debug():
                 rb.rebalance()

swift/common/utils.py

@@ -1285,7 +1285,7 @@ class Timestamp(object):
         """
         Get an isoformat string representation of the 'normal' part of the
         Timestamp with microsecond precision and no trailing timezone, for
-        example:
+        example::
 
             1970-01-01T00:00:00.000000
 
@@ -2518,12 +2518,12 @@ def get_hub():
     Another note about epoll: it's hard to use when forking. epoll works
     like so:
 
-       * create an epoll instance: efd = epoll_create(...)
+    * create an epoll instance: ``efd = epoll_create(...)``
 
-       * register file descriptors of interest with epoll_ctl(efd,
+    * register file descriptors of interest with
-             EPOLL_CTL_ADD, fd, ...)
+      ``epoll_ctl(efd, EPOLL_CTL_ADD, fd, ...)``
 
-       * wait for events with epoll_wait(efd, ...)
+    * wait for events with ``epoll_wait(efd, ...)``
 
     If you fork, you and all your child processes end up using the same
     epoll instance, and everyone becomes confused. It is possible to use
@@ -6437,7 +6437,7 @@ def make_db_file_path(db_path, epoch):
 def get_db_files(db_path):
     """
     Given the path to a db file, return a sorted list of all valid db files
-    that actually exist in that path's dir. A valid db filename has the form:
+    that actually exist in that path's dir. A valid db filename has the form::
 
         <hash>[_<epoch>].db
 

swift/obj/ssync_receiver.py

@@ -346,19 +346,19 @@ class Receiver(object):
 
         The process is generally:
 
-            1. Sender sends `:MISSING_CHECK: START` and begins
+        1. Sender sends ``:MISSING_CHECK: START`` and begins
            sending `hash timestamp` lines.
 
-            2. Receiver gets `:MISSING_CHECK: START` and begins
+        2. Receiver gets ``:MISSING_CHECK: START`` and begins
            reading the `hash timestamp` lines, collecting the
            hashes of those it desires.
 
-            3. Sender sends `:MISSING_CHECK: END`.
+        3. Sender sends ``:MISSING_CHECK: END``.
 
-            4. Receiver gets `:MISSING_CHECK: END`, responds with
+        4. Receiver gets ``:MISSING_CHECK: END``, responds with
-               `:MISSING_CHECK: START`, followed by the list of
+           ``:MISSING_CHECK: START``, followed by the list of
            <wanted_hash> specifiers it collected as being wanted
-               (one per line), `:MISSING_CHECK: END`, and flushes any
+           (one per line), ``:MISSING_CHECK: END``, and flushes any
            buffers.
 
            Each <wanted_hash> specifier has the form <hash>[ <parts>] where
@@ -366,9 +366,9 @@ class Receiver(object):
            indicating that only data or meta part of object respectively is
            required to be sync'd.
 
-            5. Sender gets `:MISSING_CHECK: START` and reads the list
+        5. Sender gets ``:MISSING_CHECK: START`` and reads the list
            of hashes desired by the receiver until reading
-               `:MISSING_CHECK: END`.
+           ``:MISSING_CHECK: END``.
 
         The collection and then response is so the sender doesn't
         have to read while it writes to ensure network buffers don't
@@ -413,18 +413,18 @@ class Receiver(object):
 
         The process is generally:
 
-            1. Sender sends `:UPDATES: START` and begins sending the
+        1. Sender sends ``:UPDATES: START`` and begins sending the
            PUT and DELETE subrequests.
 
-            2. Receiver gets `:UPDATES: START` and begins routing the
+        2. Receiver gets ``:UPDATES: START`` and begins routing the
            subrequests to the object server.
 
-            3. Sender sends `:UPDATES: END`.
+        3. Sender sends ``:UPDATES: END``.
 
-            4. Receiver gets `:UPDATES: END` and sends `:UPDATES:
+        4. Receiver gets ``:UPDATES: END`` and sends ``:UPDATES:
-               START` and `:UPDATES: END` (assuming no errors).
+           START`` and ``:UPDATES: END`` (assuming no errors).
 
-            5. Sender gets `:UPDATES: START` and `:UPDATES: END`.
+        5. Sender gets ``:UPDATES: START`` and ``:UPDATES: END``.
 
         If too many subrequests fail, as configured by
         replication_failure_threshold and replication_failure_ratio,

swift/obj/updater.py

@@ -219,12 +219,12 @@ class SweepStats(object):
     """
     Stats bucket for an update sweep
 
-    A measure of the rate at which updates are being rate-limited is:
+    A measure of the rate at which updates are being rate-limited is::
 
         deferrals / (deferrals + successes + failures - drains)
 
     A measure of the rate at which updates are not being sent during a sweep
-    is:
+    is::
 
         skips / (skips + successes + failures)
     """