swift/etc/proxy-server.conf-sample

[DEFAULT]
# bind_ip = 0.0.0.0
bind_port = 8080
# keep_idle = 600
# bind_timeout = 30
# backlog = 4096
# swift_dir = /etc/swift
# user = swift

# Enables exposing configuration settings via HTTP GET /info.
# expose_info = true

# Key to use for admin calls that are HMAC signed.  Default is empty,
# which will disable admin calls to /info.
# admin_key = secret_admin_key
#
# Allows the ability to withhold sections from showing up in the public calls
# to /info.  You can withhold subsections by separating the dict level with a
# ".".  The following would cause the sections 'container_quotas' and 'tempurl'
# to not be listed, and the key max_failed_deletes would be removed from
# bulk_delete.  Default value is 'swift.valid_api_versions' which allows all
# registered features to be listed via HTTP GET /info except
# swift.valid_api_versions information
# disallowed_sections = swift.valid_api_versions, container_quotas, tempurl

# Use an integer to override the number of pre-forked processes that will
# accept connections.  Should default to the number of effective cpu
# cores in the system.  It's worth noting that individual workers will
# use many eventlet co-routines to service multiple concurrent requests.
# workers = auto
#
# Maximum concurrent requests per worker
# max_clients = 1024
#
# Set the following two lines to enable SSL. This is for testing only.
# cert_file = /etc/swift/proxy.crt
# key_file = /etc/swift/proxy.key
#
# expiring_objects_container_divisor = 86400
# expiring_objects_account_name = expiring_objects
#
# You can specify default log routing here if you want:
# log_name = swift
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_headers = false
# log_address = /dev/log
# The following caps the length of log lines to the value given; no limit if
# set to 0, the default.
# log_max_line_length = 0
#
# This optional suffix (default is empty) that would be appended to the swift transaction
# id allows one to easily figure out from which cluster that X-Trans-Id belongs to.
# This is very useful when one is managing more than one swift cluster.
# trans_id_suffix =
#
# comma separated list of functions to call to setup custom log handlers.
# functions get passed: conf, name, log_to_console, log_route, fmt, logger,
# adapted_logger
# log_custom_handlers =
#
# If set, log_udp_host will override log_address
# log_udp_host =
# log_udp_port = 514
#
# You can enable StatsD logging here:
# log_statsd_host =
# log_statsd_port = 8125
# log_statsd_default_sample_rate = 1.0
# log_statsd_sample_rate_factor = 1.0
# log_statsd_metric_prefix =
#
# List of origin hosts that are allowed for CORS requests in addition to what
# the container has set.
# Use a comma separated list of full URL (http://foo.bar:1234,https://foo.bar)
# cors_allow_origin =

# If True (default) then CORS requests are only allowed if their Origin header
# matches an allowed origin. Otherwise, any Origin is allowed.
# strict_cors_mode = True
#
# Comma separated list of headers to expose through Access-Control-Expose-Headers,
# in addition to the defaults and any headers set in container metadata (see
# CORS documentation).
# cors_expose_headers =
#
# client_timeout = 60
# eventlet_debug = false
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =

[pipeline:main]
# This sample pipeline uses tempauth and is used for SAIO dev work and
# testing. See below for a pipeline using keystone.
pipeline = catch_errors gatekeeper healthcheck proxy-logging cache listing_formats container_sync bulk tempurl ratelimit tempauth copy container-quotas account-quotas slo dlo versioned_writes symlink proxy-logging proxy-server

# The following pipeline shows keystone integration. Comment out the one
# above and uncomment this one. Additional steps for integrating keystone are
# covered further below in the filter sections for authtoken and keystoneauth.
#pipeline = catch_errors gatekeeper healthcheck proxy-logging cache container_sync bulk tempurl ratelimit authtoken keystoneauth copy container-quotas account-quotas slo dlo versioned_writes symlink proxy-logging proxy-server

[app:proxy-server]
use = egg:swift#proxy
# You can override the default log routing for this app here:
# set log_name = proxy-server
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_address = /dev/log
#
# When deployed behind a proxy, load balancer, or SSL terminator that is
# configured to speak the human-readable (v1) PROXY protocol (see
# http://www.haproxy.org/download/1.7/doc/proxy-protocol.txt), you should set
# this option to true.  The proxy-server will populate the client connection
# information using the PROXY protocol and reject any connection missing a
# valid PROXY line with a 400.  Only v1 (human-readable) of the PROXY protocol
# is supported.
# require_proxy_protocol = false
#
# log_handoffs = true
# recheck_account_existence = 60
# recheck_container_existence = 60
# object_chunk_size = 65536
# client_chunk_size = 65536
#
# How long the proxy server will wait on responses from the a/c/o servers.
# node_timeout = 10
#
# How long the proxy server will wait for an initial response and to read a
# chunk of data from the object servers while serving GET / HEAD requests.
# Timeouts from these requests can be recovered from so setting this to
# something lower than node_timeout would provide quicker error recovery
# while allowing for a longer timeout for non-recoverable requests (PUTs).
# Defaults to node_timeout, should be overridden if node_timeout is set to a
# high number to prevent client timeouts from firing before the proxy server
# has a chance to retry.
# recoverable_node_timeout = node_timeout
#
# conn_timeout = 0.5
#
# How long to wait for requests to finish after a quorum has been established.
# post_quorum_timeout = 0.5
#
# How long without an error before a node's error count is reset. This will
# also be how long before a node is reenabled after suppression is triggered.
# error_suppression_interval = 60
#
# How many errors can accumulate before a node is temporarily ignored.
# error_suppression_limit = 10
#
# If set to 'true' any authorized user may create and delete accounts; if
# 'false' no one, even authorized, can.
# allow_account_management = false
#
# If set to 'true' authorized accounts that do not yet exist within the Swift
# cluster will be automatically created.
# account_autocreate = false
#
# If set to a positive value, trying to create a container when the account
# already has at least this maximum containers will result in a 403 Forbidden.
# Note: This is a soft limit, meaning a user might exceed the cap for
# recheck_account_existence before the 403s kick in.
# max_containers_per_account = 0
#
# This is a comma separated list of account hashes that ignore the
# max_containers_per_account cap.
# max_containers_whitelist =
#
# Comma separated list of Host headers to which the proxy will deny requests.
# deny_host_headers =
#
# Prefix used when automatically creating accounts.
# auto_create_account_prefix = .
#
# Depth of the proxy put queue.
# put_queue_depth = 10
#
# During GET and HEAD requests, storage nodes can be chosen at random
# (shuffle), by using timing measurements (timing), or by using an explicit
# region/zone match (affinity). Using timing measurements may allow for lower
# overall latency, while using affinity allows for finer control. In both the
# timing and affinity cases, equally-sorting nodes are still randomly chosen to
# spread load.
# The valid values for sorting_method are "affinity", "shuffle", or "timing".
# This option may be overridden in a per-policy configuration section.
# sorting_method = shuffle
#
# If the "timing" sorting_method is used, the timings will only be valid for
# the number of seconds configured by timing_expiry.
# timing_expiry = 300
#
# By default on a GET/HEAD swift will connect to a storage node one at a time
# in a single thread. There is smarts in the order they are hit however. If you
# turn on concurrent_gets below, then replica count threads will be used.
# With addition of the concurrency_timeout option this will allow swift to send
# out GET/HEAD requests to the storage nodes concurrently and answer with the
# first to respond. With an EC policy the parameter only affects HEAD requests.
# concurrent_gets = off
#
# This parameter controls how long to wait before firing off the next
# concurrent_get thread. A value of 0 would be fully concurrent, any other
# number will stagger the firing of the threads. This number should be
# between 0 and node_timeout. The default is what ever you set for the
# conn_timeout parameter.
# concurrency_timeout = 0.5
#
# Set to the number of nodes to contact for a normal request. You can use
# '* replicas' at the end to have it use the number given times the number of
# replicas for the ring being used for the request.
# request_node_count = 2 * replicas
#
# Specifies which backend servers to prefer on reads. Format is a comma
# separated list of affinity descriptors of the form <selection>=<priority>.
# The <selection> may be r<N> for selecting nodes in region N or r<N>z<M> for
# selecting nodes in region N, zone M. The <priority> value should be a whole
# number that represents the priority to be given to the selection; lower
# numbers are higher priority.
#
# Example: first read from region 1 zone 1, then region 1 zone 2, then
# anything in region 2, then everything else:
# read_affinity = r1z1=100, r1z2=200, r2=300
# Default is empty, meaning no preference.
# This option may be overridden in a per-policy configuration section.
# read_affinity =
#
# Specifies which backend servers to prefer on object writes. Format is a comma
# separated list of affinity descriptors of the form r<N> for region N or
# r<N>z<M> for region N, zone M. If this is set, then when handling an object
# PUT request, some number (see setting write_affinity_node_count) of local
# backend servers will be tried before any nonlocal ones.
#
# Example: try to write to regions 1 and 2 before writing to any other
# nodes:
# write_affinity = r1, r2
# Default is empty, meaning no preference.
# This option may be overridden in a per-policy configuration section.
# write_affinity =
#
# The number of local (as governed by the write_affinity setting) nodes to
# attempt to contact first on writes, before any non-local ones. The value
# should be an integer number, or use '* replicas' at the end to have it use
# the number given times the number of replicas for the ring being used for the
# request.
# This option may be overridden in a per-policy configuration section.
# write_affinity_node_count = 2 * replicas
#
# The number of local (as governed by the write_affinity setting) handoff nodes
# to attempt to contact on deletion, in addition to primary nodes.
#
# Example: in geographically distributed deployment of 2 regions, If
# replicas=3, sometimes there may be 1 primary node and 2 local handoff nodes
# in one region holding the object after uploading but before object replicated
# to the appropriate locations in other regions. In this case, include these
# handoff nodes to send request when deleting object could help make correct
# decision for the response. The default value 'auto' means Swift will
# calculate the number automatically, the default value is
# (replicas - len(local_primary_nodes)). This option may be overridden in a
# per-policy configuration section.
# write_affinity_handoff_delete_count = auto
#
# These are the headers whose values will only be shown to swift_owners. The
# exact definition of a swift_owner is up to the auth system in use, but
# usually indicates administrative responsibilities.
# swift_owner_headers = x-container-read, x-container-write, x-container-sync-key, x-container-sync-to, x-account-meta-temp-url-key, x-account-meta-temp-url-key-2, x-container-meta-temp-url-key, x-container-meta-temp-url-key-2, x-account-access-control
#
# You can set scheduling priority of processes. Niceness values range from -20
# (most favorable to the process) to 19 (least favorable to the process).
# nice_priority =
#
# You can set I/O scheduling class and priority of processes. I/O niceness
# class values are IOPRIO_CLASS_RT (realtime), IOPRIO_CLASS_BE (best-effort) and
# IOPRIO_CLASS_IDLE (idle). I/O niceness priority is a number which goes from
# 0 to 7. The higher the value, the lower the I/O priority of the process.
# Work only with ionice_class.
# ionice_class =
# ionice_priority =

# Some proxy-server configuration options may be overridden on a per-policy
# basis by including per-policy config section(s). The value of any option
# specified a per-policy section will override any value given in the
# proxy-server section for that policy only. Otherwise the value of these
# options will be that specified in the proxy-server section.
# The section name should refer to the policy index, not the policy name.
# [proxy-server:policy:<policy index>]
# sorting_method =
# read_affinity =
# write_affinity =
# write_affinity_node_count =
# write_affinity_handoff_delete_count =

[filter:tempauth]
use = egg:swift#tempauth
# You can override the default log routing for this filter here:
# set log_name = tempauth
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_headers = false
# set log_address = /dev/log
#
# The reseller prefix will verify a token begins with this prefix before even
# attempting to validate it. Also, with authorization, only Swift storage
# accounts with this prefix will be authorized by this middleware. Useful if
# multiple auth systems are in use for one Swift cluster.
# The reseller_prefix may contain a comma separated list of items. The first
# item is used for the token as mentioned above. If second and subsequent
# items exist, the middleware will handle authorization for an account with
# that prefix. For example, for prefixes "AUTH, SERVICE", a path of
# /v1/SERVICE_account is handled the same as /v1/AUTH_account. If an empty
# (blank) reseller prefix is required, it must be first in the list. Two
# single quote characters indicates an empty (blank) reseller prefix.
# reseller_prefix = AUTH

#
# The require_group parameter names a group that must be presented by
# either X-Auth-Token or X-Service-Token. Usually this parameter is
# used only with multiple reseller prefixes (e.g., SERVICE_require_group=blah).
# By default, no group is needed. Do not use .admin.
# require_group =

# The auth prefix will cause requests beginning with this prefix to be routed
# to the auth subsystem, for granting tokens, etc.
# auth_prefix = /auth/
# token_life = 86400
#
# This allows middleware higher in the WSGI pipeline to override auth
# processing, useful for middleware such as tempurl and formpost. If you know
# you're not going to use such middleware and you want a bit of extra security,
# you can set this to false.
# allow_overrides = true
#
# This specifies what scheme to return with storage URLs:
# http, https, or default (chooses based on what the server is running as)
# This can be useful with an SSL load balancer in front of a non-SSL server.
# storage_url_scheme = default
#
# Lastly, you need to list all the accounts/users you want here. The format is:
#   user_<account>_<user> = <key> [group] [group] [...] [storage_url]
# or if you want underscores in <account> or <user>, you can base64 encode them
# (with no equal signs) and use this format:
#   user64_<account_b64>_<user_b64> = <key> [group] [group] [...] [storage_url]
# There are special groups of:
#   .reseller_admin = can do anything to any account for this auth
#   .admin = can do anything within the account
# If neither of these groups are specified, the user can only access containers
# that have been explicitly allowed for them by a .admin or .reseller_admin.
# The trailing optional storage_url allows you to specify an alternate url to
# hand back to the user upon authentication. If not specified, this defaults to
# $HOST/v1/<reseller_prefix>_<account> where $HOST will do its best to resolve
# to what the requester would need to use to reach this host.
# Here are example entries, required for running the tests:
user_admin_admin = admin .admin .reseller_admin
user_test_tester = testing .admin
user_test_tester2 = testing2 .admin
user_test_tester3 = testing3
user_test2_tester2 = testing2 .admin
user_test5_tester5 = testing5 service

# To enable Keystone authentication you need to have the auth token
# middleware first to be configured. Here is an example below, please
# refer to the keystone's documentation for details about the
# different settings.
#
# You'll also need to have the keystoneauth middleware enabled and have it in
# your main pipeline, as show in the sample pipeline at the top of this file.
#
# Following parameters are known to work with keystonemiddleware v2.3.0
# (above v2.0.0), but checking the latest information in the wiki page[1]
# is recommended.
# 1. https://docs.openstack.org/keystonemiddleware/latest/middlewarearchitecture.html#configuration
#
# [filter:authtoken]
# paste.filter_factory = keystonemiddleware.auth_token:filter_factory
# www_authenticate_uri = http://keystonehost:5000
# auth_url = http://keystonehost:35357
# auth_plugin = password
# The following credentials must match the Keystone credentials for the Swift
# service and may need to be changed to match your Keystone configuration. The
# example values shown here assume a user named 'swift' with admin role on a
# project named 'service', both being in the Keystone domain with id 'default'.
# Refer to the keystonemiddleware documentation link above [1] for other
# examples.
# project_domain_id = default
# user_domain_id = default
# project_name = service
# username = swift
# password = password
#
# delay_auth_decision defaults to False, but leaving it as false will
# prevent other auth systems, staticweb, tempurl, formpost, and ACLs from
# working. This value must be explicitly set to True.
# delay_auth_decision = False
#
# cache = swift.cache
# include_service_catalog = False
#
# [filter:keystoneauth]
# use = egg:swift#keystoneauth
# The reseller_prefix option lists account namespaces that this middleware is
# responsible for. The prefix is placed before the Keystone project id.
# For example, for project 12345678, and prefix AUTH, the account is
# named AUTH_12345678 (i.e., path is /v1/AUTH_12345678/...).
# Several prefixes are allowed by specifying a comma-separated list
# as in: "reseller_prefix = AUTH, SERVICE". The empty string indicates a
# single blank/empty prefix. If an empty prefix is required in a list of
# prefixes, a value of '' (two single quote characters) indicates a
# blank/empty prefix. Except for the blank/empty prefix, an underscore ('_')
# character is appended to the value unless already present.
# reseller_prefix = AUTH
#
# The user must have at least one role named by operator_roles on a
# project in order to create, delete and modify containers and objects
# and to set and read privileged headers such as ACLs.
# If there are several reseller prefix items, you can prefix the
# parameter so it applies only to those accounts (for example
# the parameter SERVICE_operator_roles applies to the /v1/SERVICE_<project>
# path). If you omit the prefix, the option applies to all reseller
# prefix items. For the blank/empty prefix, prefix with '' (do not put
# underscore after the two single quote characters).
# operator_roles = admin, swiftoperator
#
# The reseller admin role has the ability to create and delete accounts
# reseller_admin_role = ResellerAdmin
#
# This allows middleware higher in the WSGI pipeline to override auth
# processing, useful for middleware such as tempurl and formpost. If you know
# you're not going to use such middleware and you want a bit of extra security,
# you can set this to false.
# allow_overrides = true
#
# If the service_roles parameter is present, an X-Service-Token must be
# present in the request that when validated, grants at least one role listed
# in the parameter. The X-Service-Token may be scoped to any project.
# If there are several reseller prefix items, you can prefix the
# parameter so it applies only to those accounts (for example
# the parameter SERVICE_service_roles applies to the /v1/SERVICE_<project>
# path). If you omit the prefix, the option applies to all reseller
# prefix items. For the blank/empty prefix, prefix with '' (do not put
# underscore after the two single quote characters).
# By default, no service_roles are required.
# service_roles =
#
# For backwards compatibility, keystoneauth will match names in cross-tenant
# access control lists (ACLs) when both the requesting user and the tenant
# are in the default domain i.e the domain to which existing tenants are
# migrated. The default_domain_id value configured here should be the same as
# the value used during migration of tenants to keystone domains.
# default_domain_id = default
#
# For a new installation, or an installation in which keystone projects may
# move between domains, you should disable backwards compatible name matching
# in ACLs by setting allow_names_in_acls to false:
# allow_names_in_acls = true

[filter:s3api]
use = egg:swift#s3api

# s3api setup:
#
# With either tempauth or your custom auth:
# - Put s3api just before your auth filter(s) in the pipeline
# With keystone:
# - Put s3api and s3token before keystoneauth in the pipeline
#
# Swift has no concept of the S3's resource owner; the resources
# (i.e. containers and objects) created via the Swift API have no owner
# information. This option specifies how the s3api middleware handles them
# with the S3 API.  If this option is 'false', such kinds of resources will be
# invisible and no users can access them with the S3 API.  If set to 'true',
# a resource without an owner belongs to everyone and everyone can access it
# with the S3 API.  If you care about S3 compatibility, set 'false' here.  This
# option makes sense only when the s3_acl option is set to 'true' and your
# Swift cluster has the resources created via the Swift API.
# allow_no_owner = false
#
# Set a region name of your Swift cluster.  Note that the s3api doesn't choose
# a region of the newly created bucket.  This value is used for the
# GET Bucket location API and v4 signatures calculation.
# location = us-east-1
#
# Set whether to enforce DNS-compliant bucket names. Note that S3 enforces
# these conventions in all regions except the US Standard region.
# dns_compliant_bucket_names = True
#
# Set the default maximum number of objects returned in the GET Bucket
# response.
# max_bucket_listing = 1000
#
# Set the maximum number of parts returned in the List Parts operation.
# (default: 1000 as well as S3 specification)
# If setting it larger than 10000 (swift container_listing_limit default)
# make sure you also increase the container_listing_limit in swift.conf.
# max_parts_listing = 1000
#
# Set the maximum number of objects we can delete with the Multi-Object Delete
# operation.
# max_multi_delete_objects = 1000
#
# Set the number of objects to delete at a time with the Multi-Object Delete
# operation.
# multi_delete_concurrency = 2
#
# If set to 'true', s3api uses its own metadata for ACLs
# (e.g. X-Container-Sysmeta-S3Api-Acl) to achieve the best S3 compatibility.
# If set to 'false', s3api tries to use Swift ACLs (e.g. X-Container-Read)
# instead of S3 ACLs as far as possible.
# There are some caveats that one should know about this setting. Firstly,
# if set to 'false' after being previously set to 'true' any new objects or
# containers stored while 'true' setting will be accessible to all users
# because the s3 ACLs will be ignored under s3_acl=False setting. Secondly,
# s3_acl True mode don't keep ACL consistency between both the S3 and Swift
# API. Meaning with s3_acl enabled S3 ACLs only effect objects and buckets
# via the S3 API. As this ACL information wont be available via the Swift API
# and so the ACL wont be applied.
# Note that s3_acl currently supports only keystone and tempauth.
# DON'T USE THIS for production before enough testing for your use cases.
# This stuff is still under development and it might cause something
# you don't expect.
# s3_acl = false
#
# Specify a host name of your Swift cluster.  This enables virtual-hosted style
# requests.
# storage_domain =
#
# Enable pipeline order check for SLO, s3token, authtoken, keystoneauth
# according to standard s3api/Swift construction using either tempauth or
# keystoneauth. If the order is incorrect, it raises an exception to stop
# proxy. Turn auth_pipeline_check off only when you want to bypass these
# authenticate middlewares in order to use other 3rd party (or your
# proprietary) authenticate middleware.
# auth_pipeline_check = True
#
# Enable multi-part uploads. (default: true)
# This is required to store files larger than Swift's max_file_size (by
# default, 5GiB). Note that has performance implications when deleting objects,
# as we now have to check for whether there are also segments to delete.
# allow_multipart_uploads = True
#
# Set the maximum number of parts for Upload Part operation.(default: 1000)
# When setting it to be larger than the default value in order to match the
# specification of S3, set to be larger max_manifest_segments for slo
# middleware.(specification of S3: 10000)
# max_upload_part_num = 1000
#
# Enable returning only buckets which owner are the user who requested
# GET Service operation. (default: false)
# If you want to enable the above feature, set this and s3_acl to true.
# That might cause significant performance degradation. So, only if your
# service absolutely need this feature, set this setting to true.
# If you set this to false, s3api returns all buckets.
# check_bucket_owner = false
#
# By default, Swift reports only S3 style access log.
# (e.g. PUT /bucket/object) If set force_swift_request_proxy_log
# to be 'true', Swift will become to output Swift style log
# (e.g. PUT /v1/account/container/object) in addition to S3 style log.
# Note that they will be reported twice (i.e. s3api doesn't care about
# the duplication) and Swift style log will includes also various subrequests
# to achieve S3 compatibilities when force_swift_request_proxy_log is set to
# 'true'
# force_swift_request_proxy_log = false
#
# AWS S3 document says that each part must be at least 5 MB in a multipart
# upload, except the last part.
# min_segment_size = 5242880

# You can override the default log routing for this filter here:
# log_name = s3api

[filter:s3token]
# s3token middleware authenticates with keystone using the s3 credentials
# provided in the request header. Please put s3token between s3api
# and keystoneauth if you're using keystoneauth.
use = egg:swift#s3token

# Prefix that will be prepended to the tenant to form the account
reseller_prefix = AUTH_

# By default, s3token will reject all invalid S3-style requests. Set this to
# True to delegate that decision to downstream WSGI components. This may be
# useful if there are multiple auth systems in the proxy pipeline.
delay_auth_decision = False

# Keystone server details. Note that this differs from how swift3 was
# configured: in particular, the Keystone API version must be included.
auth_uri = http://keystonehost:35357/v3

# Connect/read timeout to use when communicating with Keystone
http_timeout = 10.0

# SSL-related options
# insecure = False
# certfile =
# keyfile =

# You can override the default log routing for this filter here:
# log_name = s3token

[filter:healthcheck]
use = egg:swift#healthcheck
# An optional filesystem path, which if present, will cause the healthcheck
# URL to return "503 Service Unavailable" with a body of "DISABLED BY FILE".
# This facility may be used to temporarily remove a Swift node from a load
# balancer pool during maintenance or upgrade (remove the file to allow the
# node back into the load balancer pool).
# disable_path =

[filter:cache]
use = egg:swift#memcache
# You can override the default log routing for this filter here:
# set log_name = cache
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_headers = false
# set log_address = /dev/log
#
# If not set here, the value for memcache_servers will be read from
# memcache.conf (see memcache.conf-sample) or lacking that file, it will
# default to the value below. You can specify multiple servers separated with
# commas, as in: 10.1.2.3:11211,10.1.2.4:11211 (IPv6 addresses must
# follow rfc3986 section-3.2.2, i.e. [::1]:11211)
# memcache_servers = 127.0.0.1:11211
#
# Sets how memcache values are serialized and deserialized:
# 0 = older, insecure pickle serialization
# 1 = json serialization but pickles can still be read (still insecure)
# 2 = json serialization only (secure and the default)
# If not set here, the value for memcache_serialization_support will be read
# from /etc/swift/memcache.conf (see memcache.conf-sample).
# To avoid an instant full cache flush, existing installations should
# upgrade with 0, then set to 1 and reload, then after some time (24 hours)
# set to 2 and reload.
# In the future, the ability to use pickle serialization will be removed.
# memcache_serialization_support = 2
#
# Sets the maximum number of connections to each memcached server per worker
# memcache_max_connections = 2
#
# More options documented in memcache.conf-sample

[filter:ratelimit]
use = egg:swift#ratelimit
# You can override the default log routing for this filter here:
# set log_name = ratelimit
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_headers = false
# set log_address = /dev/log
#
# clock_accuracy should represent how accurate the proxy servers' system clocks
# are with each other. 1000 means that all the proxies' clock are accurate to
# each other within 1 millisecond.  No ratelimit should be higher than the
# clock accuracy.
# clock_accuracy = 1000
#
# max_sleep_time_seconds = 60
#
# log_sleep_time_seconds of 0 means disabled
# log_sleep_time_seconds = 0
#
# allows for slow rates (e.g. running up to 5 sec's behind) to catch up.
# rate_buffer_seconds = 5
#
# account_ratelimit of 0 means disabled
# account_ratelimit = 0

# DEPRECATED- these will continue to work but will be replaced
# by the X-Account-Sysmeta-Global-Write-Ratelimit flag.
# Please see ratelimiting docs for details.
# these are comma separated lists of account names
# account_whitelist = a,b
# account_blacklist = c,d

# with container_limit_x = r
# for containers of size x limit write requests per second to r.  The container
# rate will be linearly interpolated from the values given. With the values
# below, a container of size 5 will get a rate of 75.
# container_ratelimit_0 = 100
# container_ratelimit_10 = 50
# container_ratelimit_50 = 20

# Similarly to the above container-level write limits, the following will limit
# container GET (listing) requests.
# container_listing_ratelimit_0 = 100
# container_listing_ratelimit_10 = 50
# container_listing_ratelimit_50 = 20

[filter:read_only]
use = egg:swift#read_only
# read_only set to true means turn global read only on
# read_only = false
# allow_deletes set to true means to allow deletes
# allow_deletes = false
# Note: Put after ratelimit in the pipeline.

[filter:domain_remap]
use = egg:swift#domain_remap
# You can override the default log routing for this filter here:
# set log_name = domain_remap
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_headers = false
# set log_address = /dev/log
#
# Specify the storage_domain that match your cloud, multiple domains
# can be specified separated by a comma
# storage_domain = example.com

# Specify a root path part that will be added to the start of paths if not
# already present.
# path_root = v1

# Browsers can convert a host header to lowercase, so check that reseller
# prefix on the account is the correct case. This is done by comparing the
# items in the reseller_prefixes config option to the found prefix. If they
# match except for case, the item from reseller_prefixes will be used
# instead of the found reseller prefix. When none match, the default reseller
# prefix is used. When no default reseller prefix is configured, any request
# with an account prefix not in that list will be ignored by this middleware.
# reseller_prefixes = AUTH
# default_reseller_prefix =

# Enable legacy remapping behavior for versioned path requests:
#   c.a.example.com/v1/o -> /v1/AUTH_a/c/o
# instead of
#   c.a.example.com/v1/o -> /v1/AUTH_a/c/v1/o
# ... by default all path parts after a remapped domain are considered part of
# the object name with no special case for the path "v1"
# mangle_client_paths = False

[filter:catch_errors]
use = egg:swift#catch_errors
# You can override the default log routing for this filter here:
# set log_name = catch_errors
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_headers = false
# set log_address = /dev/log

[filter:cname_lookup]
# Note: this middleware requires python-dnspython
use = egg:swift#cname_lookup
# You can override the default log routing for this filter here:
# set log_name = cname_lookup
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_headers = false
# set log_address = /dev/log
#
# Specify the storage_domain that match your cloud, multiple domains
# can be specified separated by a comma
# storage_domain = example.com
#
# lookup_depth = 1
#
# Specify the nameservers to use to do the CNAME resolution. If unset, the
# system configuration is used. Multiple nameservers can be specified
# separated by a comma. Default port 53 can be overridden. IPv6 is accepted.
# Example: 127.0.0.1, 127.0.0.2, 127.0.0.3:5353, [::1], [::1]:5353
# nameservers =

# Note: Put staticweb just after your auth filter(s) in the pipeline
[filter:staticweb]
use = egg:swift#staticweb
# You can override the default log routing for this filter here:
# set log_name = staticweb
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_headers = false
# set log_address = /dev/log
#
# At times when it's impossible for staticweb to guess the outside
# endpoint correctly, the url_base may be used to supply the URL
# scheme and/or the host name (and port number) in order to generate
# redirects.
# Example values:
#    http://www.example.com    - redirect to www.example.com
#    https:                    - changes the schema only
#    https://                  - same, changes the schema only
#    //www.example.com:8080    - redirect www.example.com on port 8080
#                                (schema unchanged)
# url_base =

# Note: Put tempurl before dlo, slo and your auth filter(s) in the pipeline
[filter:tempurl]
use = egg:swift#tempurl
# The methods allowed with Temp URLs.
# methods = GET HEAD PUT POST DELETE
#
# The headers to remove from incoming requests. Simply a whitespace delimited
# list of header names and names can optionally end with '*' to indicate a
# prefix match. incoming_allow_headers is a list of exceptions to these
# removals.
# incoming_remove_headers = x-timestamp
#
# The headers allowed as exceptions to incoming_remove_headers. Simply a
# whitespace delimited list of header names and names can optionally end with
# '*' to indicate a prefix match.
# incoming_allow_headers =
#
# The headers to remove from outgoing responses. Simply a whitespace delimited
# list of header names and names can optionally end with '*' to indicate a
# prefix match. outgoing_allow_headers is a list of exceptions to these
# removals.
# outgoing_remove_headers = x-object-meta-*
#
# The headers allowed as exceptions to outgoing_remove_headers. Simply a
# whitespace delimited list of header names and names can optionally end with
# '*' to indicate a prefix match.
# outgoing_allow_headers = x-object-meta-public-*
#
# The digest algorithm(s) supported for generating signatures;
# whitespace-delimited.
# allowed_digests = sha1 sha256 sha512

# Note: Put formpost just before your auth filter(s) in the pipeline
[filter:formpost]
use = egg:swift#formpost

# Note: Just needs to be placed before the proxy-server in the pipeline.
[filter:name_check]
use = egg:swift#name_check
# forbidden_chars = '"`<>
# maximum_length = 255
# forbidden_regexp = /\./|/\.\./|/\.$|/\.\.$

[filter:list-endpoints]
use = egg:swift#list_endpoints
# list_endpoints_path = /endpoints/

[filter:proxy-logging]
use = egg:swift#proxy_logging
# If not set, logging directives from [DEFAULT] without "access_" will be used
# access_log_name = swift
# access_log_facility = LOG_LOCAL0
# access_log_level = INFO
# access_log_address = /dev/log
#
# If set, access_log_udp_host will override access_log_address
# access_log_udp_host =
# access_log_udp_port = 514
#
# You can use log_statsd_* from [DEFAULT] or override them here:
# access_log_statsd_host =
# access_log_statsd_port = 8125
# access_log_statsd_default_sample_rate = 1.0
# access_log_statsd_sample_rate_factor = 1.0
# access_log_statsd_metric_prefix =
# access_log_headers = false
#
# If access_log_headers is True and access_log_headers_only is set only
# these headers are logged. Multiple headers can be defined as comma separated
# list like this: access_log_headers_only = Host, X-Object-Meta-Mtime
# access_log_headers_only =
#
# By default, the X-Auth-Token is logged. To obscure the value,
# set reveal_sensitive_prefix to the number of characters to log.
# For example, if set to 12, only the first 12 characters of the
# token appear in the log. An unauthorized access of the log file
# won't allow unauthorized usage of the token. However, the first
# 12 or so characters is unique enough that you can trace/debug
# token usage. Set to 0 to suppress the token completely (replaced
# by '...' in the log).
# Note: reveal_sensitive_prefix will not affect the value
# logged with access_log_headers=True.
# reveal_sensitive_prefix = 16
#
# What HTTP methods are allowed for StatsD logging (comma-sep); request methods
# not in this list will have "BAD_METHOD" for the <verb> portion of the metric.
# log_statsd_valid_http_methods = GET,HEAD,POST,PUT,DELETE,COPY,OPTIONS
#
# Note: The double proxy-logging in the pipeline is not a mistake. The
# left-most proxy-logging is there to log requests that were handled in
# middleware and never made it through to the right-most middleware (and
# proxy server). Double logging is prevented for normal requests. See
# proxy-logging docs.
#
# Hashing algorithm for log anonymization. Must be one of algorithms supported
# by Python's hashlib.
# log_anonymization_method = MD5
#
# Salt added during log anonymization
# log_anonymization_salt = 
#
# Template used to format access logs. All words surrounded by curly brackets
# will be substituted with the appropriate values
# log_msg_template = {client_ip} {remote_addr} {end_time.datetime} {method} {path} {protocol} {status_int} {referer} {user_agent} {auth_token} {bytes_recvd} {bytes_sent} {client_etag} {transaction_id} {headers} {request_time} {source} {log_info} {start_time} {end_time} {policy_index}

# Note: Put before both ratelimit and auth in the pipeline.
[filter:bulk]
use = egg:swift#bulk
# max_containers_per_extraction = 10000
# max_failed_extractions = 1000
# max_deletes_per_request = 10000
# max_failed_deletes = 1000
#
# In order to keep a connection active during a potentially long bulk request,
# Swift may return whitespace prepended to the actual response body. This
# whitespace will be yielded no more than every yield_frequency seconds.
# yield_frequency = 10
#
# Note: The following parameter is used during a bulk delete of objects and
# their container. This would frequently fail because it is very likely
# that all replicated objects have not been deleted by the time the middleware got a
# successful response. It can be configured the number of retries. And the
# number of seconds to wait between each retry will be 1.5**retry
# delete_container_retry_count = 0
#
# To speed up the bulk delete process, multiple deletes may be executed in
# parallel. Avoid setting this too high, as it gives clients a force multiplier
# which may be used in DoS attacks. The suggested range is between 2 and 10.
# delete_concurrency = 2

# Note: Put after auth and staticweb in the pipeline.
[filter:slo]
use = egg:swift#slo
# max_manifest_segments = 1000
# max_manifest_size = 8388608
#
# Rate limiting applies only to segments smaller than this size (bytes).
# rate_limit_under_size = 1048576
#
# Start rate-limiting SLO segment serving after the Nth small segment of a
# segmented object.
# rate_limit_after_segment = 10
#
# Once segment rate-limiting kicks in for an object, limit segments served
# to N per second. 0 means no rate-limiting.
# rate_limit_segments_per_sec = 1
#
# Time limit on GET requests (seconds)
# max_get_time = 86400
#
# When creating an SLO, multiple segment validations may be executed in
# parallel. Further, multiple deletes may be executed in parallel when deleting
# with ?multipart-manifest=delete. Use this setting to limit how many
# subrequests may be executed concurrently. Avoid setting it too high, as it
# gives clients a force multiplier which may be used in DoS attacks. The
# suggested range is between 2 and 10.
# concurrency = 2
#
# This may be used to separately tune validation and delete concurrency values.
# Default is to use the concurrency value from above; all of the same caveats
# apply regarding recommended ranges.
# delete_concurrency = 2
#
# In order to keep a connection active during a potentially long PUT request,
# clients may request that Swift send whitespace ahead of the final response
# body. This whitespace will be yielded at most every yield_frequency seconds.
# yield_frequency = 10

# Note: Put after auth and staticweb in the pipeline.
# If you don't put it in the pipeline, it will be inserted for you.
[filter:dlo]
use = egg:swift#dlo
# Start rate-limiting DLO segment serving after the Nth segment of a
# segmented object.
# rate_limit_after_segment = 10
#
# Once segment rate-limiting kicks in for an object, limit segments served
# to N per second. 0 means no rate-limiting.
# rate_limit_segments_per_sec = 1
#
# Time limit on GET requests (seconds)
# max_get_time = 86400

# Note: Put after auth in the pipeline.
[filter:container-quotas]
use = egg:swift#container_quotas

# Note: Put after auth in the pipeline.
[filter:account-quotas]
use = egg:swift#account_quotas

[filter:gatekeeper]
use = egg:swift#gatekeeper
# Set this to false if you want to allow clients to set arbitrary X-Timestamps
# on uploaded objects. This may be used to preserve timestamps when migrating
# from a previous storage system, but risks allowing users to upload
# difficult-to-delete data.
# shunt_inbound_x_timestamp = true
#
# You can override the default log routing for this filter here:
# set log_name = gatekeeper
# set log_facility = LOG_LOCAL0
# set log_level = INFO
# set log_headers = false
# set log_address = /dev/log

[filter:container_sync]
use = egg:swift#container_sync
# Set this to false if you want to disallow any full URL values to be set for
# any new X-Container-Sync-To headers. This will keep any new full URLs from
# coming in, but won't change any existing values already in the cluster.
# Updating those will have to be done manually, as knowing what the true realm
# endpoint should be cannot always be guessed.
# allow_full_urls = true
# Set this to specify this clusters //realm/cluster as "current" in /info
# current = //REALM/CLUSTER

# Note: Put it at the beginning of the pipeline to profile all middleware. But
# it is safer to put this after catch_errors, gatekeeper and healthcheck.
[filter:xprofile]
use = egg:swift#xprofile
# This option enable you to switch profilers which should inherit from python
# standard profiler. Currently the supported value can be 'cProfile',
# 'eventlet.green.profile' etc.
# profile_module = eventlet.green.profile
#
# This prefix will be used to combine process ID and timestamp to name the
# profile data file.  Make sure the executing user has permission to write
# into this path (missing path segments will be created, if necessary).
# If you enable profiling in more than one type of daemon, you must override
# it with an unique value like: /var/log/swift/profile/proxy.profile
# log_filename_prefix = /tmp/log/swift/profile/default.profile
#
# the profile data will be dumped to local disk based on above naming rule
# in this interval.
# dump_interval = 5.0
#
# Be careful, this option will enable profiler to dump data into the file with
# time stamp which means there will be lots of files piled up in the directory.
# dump_timestamp = false
#
# This is the path of the URL to access the mini web UI.
# path = /__profile__
#
# Clear the data when the wsgi server shutdown.
# flush_at_shutdown = false
#
# unwind the iterator of applications
# unwind = false

# Note: Put after slo, dlo in the pipeline.
# If you don't put it in the pipeline, it will be inserted automatically.
[filter:versioned_writes]
use = egg:swift#versioned_writes
# Enables using versioned writes middleware and exposing configuration
# settings via HTTP GET /info.
# WARNING: Setting this option bypasses the "allow_versions" option
# in the container configuration file, which will be eventually
# deprecated. See documentation for more details.
# allow_versioned_writes = false

# Note: Put after auth and before dlo and slo middlewares.
# If you don't put it in the pipeline, it will be inserted for you.
[filter:copy]
use = egg:swift#copy

# Note: To enable encryption, add the following 2 dependent pieces of crypto
# middleware to the proxy-server pipeline. They should be to the right of all
# other middleware apart from the final proxy-logging middleware, and in the
# order shown in this example:
# <other middleware> keymaster encryption proxy-logging proxy-server
[filter:keymaster]
use = egg:swift#keymaster

# Sets the root secret from which encryption keys are derived. This must be set
# before first use to a value that is a base64 encoding of at least 32 bytes.
# The security of all encrypted data critically depends on this key, therefore
# it should be set to a high-entropy value. For example, a suitable value may
# be obtained by base-64 encoding a 32 byte (or longer) value generated by a
# cryptographically secure random number generator. Changing the root secret is
# likely to result in data loss.
encryption_root_secret = changeme

# Multiple root secrets may be configured using options named
# 'encryption_root_secret_<secret_id>' where 'secret_id' is a unique
# identifier. This enables the root secret to be changed from time to time.
# Only one root secret is used for object PUTs or POSTs at any moment in time.
# This is specified by the 'active_root_secret_id' option. If
# 'active_root_secret_id' is not specified then the root secret specified by
# 'encryption_root_secret' is considered to be the default. Once a root secret
# has been used as the default root secret it must remain in the config file in
# order that any objects that were encrypted with it may be subsequently
# decrypted. The secret_id used to identify the key cannot change.
# encryption_root_secret_myid = changeme
# active_root_secret_id = myid

# Sets the path from which the keymaster config options should be read. This
# allows multiple processes which need to be encryption-aware (for example,
# proxy-server and container-sync) to share the same config file, ensuring
# that the encryption keys used are the same. The format expected is similar
# to other config files, with a single [keymaster] section and a single
# encryption_root_secret option. If this option is set, the root secret
# MUST NOT be set in proxy-server.conf.
# keymaster_config_path =

# To store the encryption root secret in a remote key management system (KMS)
# such as Barbican, replace the keymaster middleware with the kms_keymaster
# middleware in the proxy-server pipeline. They should be to the right of all
# other middleware apart from the final proxy-logging middleware, and in the
# order shown in this example:
# <other middleware> kms_keymaster encryption proxy-logging proxy-server
[filter:kms_keymaster]
use = egg:swift#kms_keymaster

# Sets the path from which the keymaster config options should be read. This
# allows multiple processes which need to be encryption-aware (for example,
# proxy-server and container-sync) to share the same config file, ensuring
# that the encryption keys used are the same. The format expected is similar
# to other config files, with a single [kms_keymaster] section. See the
# keymaster.conf-sample file for details on the kms_keymaster configuration
# options.
# keymaster_config_path =

# kmip_keymaster middleware may be used to fetch an encryption root secret from
# a KMIP service. It should replace, in the same position, any other keymaster
# middleware in the proxy-server pipeline, so that the middleware order is as
# shown in this example:
# <other middleware> kmip_keymaster encryption proxy-logging proxy-server
[filter:kmip_keymaster]
use = egg:swift#kmip_keymaster

# Sets the path from which the keymaster config options should be read. This
# allows multiple processes which need to be encryption-aware (for example,
# proxy-server and container-sync) to share the same config file, ensuring
# that the encryption keys used are the same. As an added benefit the
# keymaster configuration file can have different permissions than the
# `proxy-server.conf` file. The format expected is similar
# to other config files, with a single [kmip_keymaster] section. See the
# keymaster.conf-sample file for details on the kmip_keymaster configuration
# options.
# keymaster_config_path =

[filter:encryption]
use = egg:swift#encryption

# By default all PUT or POST'ed object data and/or metadata will be encrypted.
# Encryption of new data and/or metadata may be disabled by setting
# disable_encryption to True. However, all encryption middleware should remain
# in the pipeline in order for existing encrypted data to be read.
# disable_encryption = False

# listing_formats should be just right of the first proxy-logging middleware,
# and left of most other middlewares. If it is not already present, it will
# be automatically inserted for you.
[filter:listing_formats]
use = egg:swift#listing_formats

# Note: Put after slo, dlo, versioned_writes, but before encryption in the
# pipeline.
[filter:symlink]
use = egg:swift#symlink
# Symlinks can point to other symlinks provided the number of symlinks in a
# chain does not exceed the symloop_max value. If the number of chained
# symlinks exceeds the limit symloop_max a 409 (HTTPConflict) error
# response will be produced.
# symloop_max = 2