From 5857cab7830b23da4a5486e3a4d929b27184638c Mon Sep 17 00:00:00 2001 From: Sheel Rana Date: Mon, 28 Sep 2020 04:38:00 +0900 Subject: [PATCH] Updated install/index.rst contents Aligned install/index.rst file contents - For better readability/understanding. - VIM installation with kolla-ansible is not proper for now. As a quick fix, replacing it with general openstack insallation guide: https://docs.openstack.org/install-guide/index.html Change-Id: Icd57954cf0af7916b2c044a250eb136b451ad226 --- doc/source/install/index.rst | 41 +-- .../install/openstack_vim_installation.rst | 234 ------------------ 2 files changed, 22 insertions(+), 253 deletions(-) delete mode 100644 doc/source/install/openstack_vim_installation.rst diff --git a/doc/source/install/index.rst b/doc/source/install/index.rst index 5f09003b7..4ba004d4d 100644 --- a/doc/source/install/index.rst +++ b/doc/source/install/index.rst @@ -21,31 +21,34 @@ Tacker Installation Guide Installation ------------ -For Tacker to work, the system consists of two parts, one is tacker system -and another is VIM systems. Tacker system can be installed -(here just some ways are listed): +For Tacker to work, the system consists of two parts: -* via DevStack, which is usually used by developers -* via Tacker source code manually -* via Kolla installation +* Tacker system +* VIM systems +Refer following installation procedures for both of these systems: -.. toctree:: - :maxdepth: 1 +#. Tacker Installation - devstack.rst - manual_installation.rst - kolla.rst + Tacker can be installed using following methods: + (here just some ways are listed) -Target VIM installation ------------------------ + .. toctree:: + :maxdepth: 1 -Most of time, the target VIM existed for Tacker to manage. This section shows -us how to prepare a target VIM for Tacker. + Install via Devstack + Manual Installation + Install via Kolla Ansible -.. toctree:: - :maxdepth: 1 +#. Target VIM Installation - openstack_vim_installation.rst - kubernetes_vim_installation.rst + Most of the time, the target VIM already exists for Tacker to manage. + In case the target VIM does not exist, this section shows how to prepare a + target VIM for Tacker to manage. + + .. toctree:: + :maxdepth: 1 + + Openstack VIM Installation + Kubernetes VIM Installation diff --git a/doc/source/install/openstack_vim_installation.rst b/doc/source/install/openstack_vim_installation.rst deleted file mode 100644 index 6425c73eb..000000000 --- a/doc/source/install/openstack_vim_installation.rst +++ /dev/null @@ -1,234 +0,0 @@ -.. - Copyright 2014-2017 OpenStack Foundation - All Rights Reserved. - - Licensed under the Apache License, Version 2.0 (the "License"); you may - not use this file except in compliance with the License. You may obtain - a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the - License for the specific language governing permissions and limitations - under the License. - - -========================== -OpenStack VIM Installation -========================== - -This document describes how to install a simple OpenStack which can be -a Tacker VIM. Since the kolla-ansible provides a good and stable way to deploy -an OpenStack environment, this document adopts it to finish this task. - -The target OpenStack consists of three nodes. Besides the OpenStack role, the -first one plays kolla-ansible deploy role, which will run a local registry, -and be used to run kolla-ansible tool. - -The basic information and the topology of these nodes is like this: - -.. image:: ../_images/openstack_nodes.png - :scale: 50 % - - -Prepare kolla-ansible ---------------------- - -About how to prepare Docker and kolla-ansible environment, -please refer to -https://docs.openstack.org/kolla-ansible/latest/user/quickstart.html - - -Set up local kolla-ansible docker registry ------------------------------------------- - -Kolla-ansible is publishing the packaged Docker images at -http://tarballs.openstack.org/kolla/images/. This document will use -``centos-source-registry-pike.tar.gz``. - -Download this file and extract: - -.. code-block:: console - - # wget http://tarballs.openstack.org/kolla/images/centos-source-registry-pike.tar.gz - # tar xzvf centos-source-registry-pike.tar.gz -C /opt/registry/ - -Start Docker registry container: - -.. code-block:: console - - # docker run -d -v /opt/registry:/var/lib/registry -p 4000:5000 --restart=always --name registry registry:2 - -Set Docker to access local registry via insecure channel: - -.. code-block:: console - - # cat /usr/lib/systemd/system/docker.service | grep insecure - ExecStart=/usr/bin/dockerd --insecure-registry 10.1.0.6:4000 - # systemctl daemon-reload - # systemctl restart docker - -.. note:: - - The way to set up Docker to access insecure registry depends on operating - system and Docker version, above way is just an example. - -Verify the local registry contains the needed images: - -.. code-block:: console - - # curl -k localhost:4000/v2/_catalog - # curl -k localhost:4000/v2/lokolla/centos-source-fluentd/tags/list - {"name":"lokolla/centos-source-fluentd","tags":["5.0.1"]} - - -Install OpenStack ------------------ - -#. Edit kolla ansible's configuration file ``/etc/kolla/globals.yml``: - - .. code-block:: ini - - --- - kolla_install_type: "source" - openstack_release: "5.0.1" - kolla_internal_vip_address: "10.1.0.5" - docker_registry: "10.1.0.6:4000" - docker_namespace: "lokolla" - api_interface: "eth0" - tunnel_interface: "eth1" - neutron_external_interface: "eth2" - enable_glance: "yes" - enable_haproxy: "yes" - enable_keystone: "yes" - enable_mariadb: "yes" - enable_memcached: "yes" - enable_neutron: "yes" - enable_nova: "yes" - enable_rabbitmq: "yes" - enable_aodh: "yes" - enable_ceilometer: "yes" - enable_gnocchi: "yes" - enable_heat: "yes" - enable_horizon: "yes" - enable_neutron_sfc: "yes" - - .. note:: - - If nodes are using different network interface names to connect each - other, please define them in inventory file. - - "10.1.0.5" is an un-used ip address, will be used as VIP address, - realized by keepalived container. - - -#. Run kolla-genpwd to generate system passwords: - - .. code-block:: console - - $ sudo cp etc/kolla/passwords.yml /etc/kolla/passwords.yml - $ sudo kolla-genpwd - - .. note:: - - If the pypi version is used to install kolla-ansible the skeleton - passwords file may be under - ``/usr/share/kolla-ansible/etc_examples/kolla``. - - - With this command, ``/etc/kolla/passwords.yml`` will be populated with - generated passwords. - - -#. Editor inventory: - - First copy the sample multinode inventory file from kolla-ansible: - - .. code-block:: console - - # cp inventory/multinode ~/ - - Then edit it to contain all of the OpenStack nodes. - - .. code-block:: ini - - [all_vim_nodes] - 10.1.0.8 - 10.1.0.7 - 10.1.0.6 - - [control:children] - all_vim_nodes - - [network:children] - all_vim_nodes - - [compute:children] - all_vim_nodes - - [monitoring:children] - all_vim_nodes - - [storage:children] - #if the tacker needs volume feature, put related nodes here - -#. Run kolla ansible deploy to install OpenStack system: - - .. code-block:: console - - # kolla-ansible deploy -i ~/multinode - -#. Run kolla ansible post-deploy to generate tacker access environment file: - - .. code-block:: console - - # kolla-ansible post-deploy - - With this command, the ``admin-openrc.sh`` will be generated at - ``/etc/kolla/admin-openrc.sh``. - - -Prepare OpenStack ------------------ - -After installation, OpenStack administrator needs to: - -* Initialized the flavors that the platform will support. Most - Tacker sample TOSCA templates will ask Tacker to create Flavor - on demand. If not, the specified flavor in templates must exist - in OpenStack. - -* Upload related images. Tacker repo's sample TOSCA templates are - referring to cirros image named ``cirros-0.4.0-x86_64-disk``, so - this image should uploaded into OpenStack before Tacker uses it. - -In additions, following steps are needed: - -#. Create projects and users which can be used by Tacker: - - This is a simple task for any OpenStack administrator, but one thing to pay - attention to is that the user must have ``admin`` and ``heat_stack_owner`` - roles on the user's project. - - .. image:: ../_images/openstack_role.png - :scale: 50 % - - -#. Create Neutron networks: - - Most sample TOSCA templates assume there are three Neutron networks in - target OpenStack that the VIM user can use: - - * ``net_mgmt``, which is a network Tacker system can access to. Some Tacker - features, such as monitor policies, need Tacker to access started VNF - virtual machines. For Tacker to access VNF via ``net_mgmt``, ``net_mgmt`` - can be a provider network. - - * ``net0`` and ``net1``, which are two business networks which VNFs will - use. How to connected them depends on the VNFs' business. - - So create these three networks accordingly. For commands to create Neutron - networks, please refer to - https://docs.openstack.org/python-openstackclient/latest/cli/command-objects/network.html