diff --git a/doc/source/index.rst b/doc/source/index.rst
index 0719a3476..321a257e1 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -41,6 +41,7 @@ Getting Started
    :maxdepth: 1
 
    install/getting_started.rst
+   install/deploy_openwrt.rst
 
 Feature Documentation
 =====================
diff --git a/doc/source/install/deploy_openwrt.rst b/doc/source/install/deploy_openwrt.rst
new file mode 100644
index 000000000..09b1daf99
--- /dev/null
+++ b/doc/source/install/deploy_openwrt.rst
@@ -0,0 +1,180 @@
+..
+      Copyright 2014-2015 OpenStack Foundation
+      All Rights Reserved.
+
+      Licensed under the Apache License, Version 2.0 (the "License"); you may
+      not use this file except in compliance with the License. You may obtain
+      a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+      Unless required by applicable law or agreed to in writing, software
+      distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+      WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+      License for the specific language governing permissions and limitations
+      under the License.
+
+========================
+Deploying OpenWRT as VNF
+========================
+
+Once tacker is installed successfully, follow the steps given below to get
+started with deploying OpenWRT as VNF.
+
+1. Ensure Glance already contains OpenWRT image. Normally, Tacker tries
+to add OpenWRT image to Glance while installing via devstack. By running
+**glance image-list** to check OpenWRT image if exists. If not, download
+the image from
+`OpenWRT official site
+<https://downloads.openwrt.org/chaos_calmer/15.05.1/x86/generic/>`_.
+And upload this image into Glance by using the command below:
+
+.. code-block:: console
+
+    glance image-create --name OpenWRT \
+                        --disk-format qcow2 \
+                        --container-format bare \
+                        --progress < openwrt-x86-kvm_guest-combined-ext4.img
+
+..
+
+2. Create a yaml template named tosca-vnfd-openwrt-with-firewall-rules.yaml
+which contains basic configuration of OpenWRT and some firewall rules of
+OpenWRT. All contents of the template file shows below:
+
+.. code-block:: ini
+
+   tosca_definitions_version: tosca_simple_profile_for_nfv_1_0_0
+
+   description: OpenWRT with services
+
+   metadata:
+     template_name: OpenWRT
+
+   topology_template:
+     node_templates:
+       VDU1:
+         type: tosca.nodes.nfv.VDU.Tacker
+         capabilities:
+           nfv_compute:
+             properties:
+               num_cpus: 1
+               mem_size: 512 MB
+               disk_size: 1 GB
+         properties:
+           image: OpenWRT
+           config:
+             firewall: |
+               package firewall
+
+               config defaults
+                   option syn_flood '1'
+                   option input 'ACCEPT'
+                   option output 'ACCEPT'
+                   option forward 'REJECT'
+
+               config zone
+                   option name 'lan'
+                   list network 'lan'
+                   option input 'ACCEPT'
+                   option output 'ACCEPT'
+                   option forward 'ACCEPT'
+
+               config zone
+                   option name 'wan'
+                   list network 'wan'
+                   list network 'wan6'
+                   option input 'REJECT'
+                   option output 'ACCEPT'
+                   option forward 'REJECT'
+                   option masq '1'
+                   option mtu_fix '1'
+
+               config forwarding
+                   option src 'lan'
+                   option dest 'wan'
+
+               config rule
+                   option name 'Allow-DHCP-Renew'
+                   option src 'wan'
+                   option proto 'udp'
+                   option dest_port '68'
+                   option target 'ACCEPT'
+                   option family 'ipv4'
+
+               config rule
+                   option name 'Allow-Ping'
+                   option src 'wan'
+                   option proto 'icmp'
+                   option icmp_type 'echo-request'
+                   option family 'ipv4'
+                   option target 'ACCEPT'
+           mgmt_driver: openwrt
+           monitoring_policy:
+             name: ping
+             parameters:
+               count: 3
+               interval: 10
+             actions:
+               failure: respawn
+
+       CP1:
+         type: tosca.nodes.nfv.CP.Tacker
+         properties:
+           management: true
+           anti_spoofing_protection: false
+         requirements:
+           - virtualLink:
+               node: VL1
+           - virtualBinding:
+               node: VDU1
+
+       VL1:
+         type: tosca.nodes.nfv.VL
+         properties:
+           network_name: net_mgmt
+           vendor: Tacker
+
+..
+
+The above template file comes from two files. One is `tosca-vnfd-openwrt.yaml
+<https://github.com/openstack/tacker/blob/master/samples/tosca-templates/
+vnfd/tosca-vnfd-openwrt.yaml>`_ and other one is
+`tosca-config-openwrt-with-firewall.yaml
+<https://github.com/openstack/tacker/blob/master/samples/tosca-templates/
+vnfd/tosca-config-openwrt-with-firewall.yaml>`_.
+In this template file, we specify the **mgmt_driver: openwrt** which means
+this VNFD is managed by `openwrt driver
+<https://github.com/openstack/tacker/blob/master/tacker/
+vnfm/mgmt_drivers/openwrt/openwrt.py>`_. This driver can inject firewall rules
+which defined in VNFD into OpenWRT instance by using SSH protocol. We can
+run **cat /etc/config/firewall** to confirm the firewall rules if inject
+succeed.
+
+3.Create a sample vnfd:
+
+.. code-block:: console
+
+    tacker vnfd-create \
+                       --vnfd-file tosca-vnfd-openwrt-with-firewall-rules.yaml \
+                       <VNFD_NAME>
+..
+
+4.Create a VNF:
+
+.. code-block:: console
+
+    tacker vnf-create --vnfd-name <VNFD_NAME> <NAME>
+..
+
+This VNF will contains all the firewall rules that VNFD contains
+by using 'cat /etc/config/firewall' in VNF.
+
+
+5.Check the status:
+
+.. code-block:: console
+
+    tacker vnf-list
+    tacker vnf-show <VNF_ID>
+..