95 lines
3.0 KiB
INI
95 lines
3.0 KiB
INI
[ml2_cisco]
|
|
|
|
# (StrOpt) A short prefix to prepend to the VLAN number when creating a
|
|
# VLAN interface. For example, if an interface is being created for
|
|
# VLAN 2001 it will be named 'q-2001' using the default prefix.
|
|
#
|
|
# vlan_name_prefix = q-
|
|
# Example: vlan_name_prefix = vnet-
|
|
|
|
# (BoolOpt) A flag to enable round robin scheduling of routers for SVI.
|
|
# svi_round_robin = False
|
|
|
|
#
|
|
# (StrOpt) The name of the physical_network managed via the Cisco Nexus Switch.
|
|
# This string value must be present in the ml2_conf.ini network_vlan_ranges
|
|
# variable.
|
|
#
|
|
# managed_physical_network =
|
|
# Example: managed_physical_network = physnet1
|
|
|
|
# Cisco Nexus Switch configurations.
|
|
# Each switch to be managed by Openstack Neutron must be configured here.
|
|
#
|
|
# Cisco Nexus Switch Format.
|
|
# [ml2_mech_cisco_nexus:<IP address of switch>]
|
|
# <hostname>=<intf_type:port> (1)
|
|
# ssh_port=<ssh port> (2)
|
|
# username=<credential username> (3)
|
|
# password=<credential password> (4)
|
|
#
|
|
# (1) For each host connected to a port on the switch, specify the hostname
|
|
# and the Nexus physical port (interface) it is connected to.
|
|
# Valid intf_type's are 'ethernet' and 'port-channel'.
|
|
# The default setting for <intf_type:> is 'ethernet' and need not be
|
|
# added to this setting.
|
|
# (2) The TCP port for connecting via SSH to manage the switch. This is
|
|
# port number 22 unless the switch has been configured otherwise.
|
|
# (3) The username for logging into the switch to manage it.
|
|
# (4) The password for logging into the switch to manage it.
|
|
#
|
|
# Example:
|
|
# [ml2_mech_cisco_nexus:1.1.1.1]
|
|
# compute1=1/1
|
|
# compute2=ethernet:1/2
|
|
# compute3=port-channel:1
|
|
# ssh_port=22
|
|
# username=admin
|
|
# password=mySecretPassword
|
|
|
|
[ml2_cisco_apic]
|
|
|
|
# Hostname for the APIC controller
|
|
# apic_host=1.1.1.1
|
|
|
|
# Username for the APIC controller
|
|
# apic_username=user
|
|
|
|
# Password for the APIC controller
|
|
# apic_password=password
|
|
|
|
# Port for the APIC Controller
|
|
# apic_port=80
|
|
|
|
# Names for APIC objects used by Neutron
|
|
# Note: When deploying multiple clouds against one APIC,
|
|
# these names must be unique between the clouds.
|
|
# apic_vmm_domain=openstack
|
|
# apic_vlan_ns_name=openstack_ns
|
|
# apic_node_profile=openstack_profile
|
|
# apic_entity_profile=openstack_entity
|
|
# apic_function_profile=openstack_function
|
|
|
|
# The following flag will cause all the node profiles on the APIC to
|
|
# be cleared when neutron-server starts. This is typically used only
|
|
# for test environments that require clean-slate startup conditions.
|
|
# apic_clear_node_profiles=False
|
|
|
|
# Specify your network topology.
|
|
# This section indicates how your compute nodes are connected to the fabric's
|
|
# switches and ports. The format is as follows:
|
|
#
|
|
# [switch:<swich_id_from_the_apic>]
|
|
# <compute_host>,<compute_host>=<switchport_the_host(s)_are_connected_to>
|
|
#
|
|
# You can have multiple sections, one for each switch in your fabric that is
|
|
# participating in Openstack. e.g.
|
|
#
|
|
# [switch:17]
|
|
# ubuntu,ubuntu1=1/10
|
|
# ubuntu2,ubuntu3=1/11
|
|
#
|
|
# [switch:18]
|
|
# ubuntu5,ubuntu6=1/1
|
|
# ubuntu7,ubuntu8=1/2
|