openstack
/
tripleo-ci
Code Issues Proposed changes
tripleo-ci/scripts/tripleo.sh

1064 lines
40 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
# Copyright 2015 Red Hat, Inc.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
##############################################################################
# tripleo.sh is a script to automate a TripleO setup. It's goals are to be
# used in aiding:
#
# - developer setups
# - CI
# - documentation generation (hopefully)
#
# It's not a new CLI, or end user facing wrapper around existing TripleO
# CLI's.
#
# tripleo.sh should never contain any "business" logic in it that is
# necessary for a successful deployment. It should instead just mirror the
# steps that we document for TripleO end users.
#
##############################################################################
set -eu
set -o pipefail
SCRIPT_NAME=${SCRIPT_NAME:-$(basename $0)}
function show_options {
echo "Usage: $SCRIPT_NAME [options]"
echo
echo "Automates TripleO setup steps."
echo
echo "$SCRIPT_NAME is also configurable via environment variables, most of"
echo "which are not exposed via cli args for simplicity. See the source"
echo "for the set of environment variables that can be overridden."
echo
echo "Note that cli args always take precedence over environment"
echo "variables."
echo
echo "Options:"
echo " --repo-setup -- Perform repository setup."
echo " --delorean-setup -- Install local delorean build environment."
echo " --delorean-build -- Build a delorean package locally"
echo " --multinode-setup -- Perform multinode setup."
echo " --bootstrap-subnodes -- Perform bootstrap setup on subnodes."
echo " --undercloud -- Install the undercloud."
echo " --overcloud-images -- Build and load overcloud images."
echo " --register-nodes -- Register and configure nodes."
echo " --introspect-nodes -- Introspect nodes."
echo " --undercloud-upgrade -- Upgrade a deployed undercloud."
echo " --overcloud-deploy -- Deploy an overcloud."
echo " --overcloud-update -- Update a deployed overcloud."
echo " --overcloud-delete -- Delete the overcloud."
echo " --use-containers -- Use a containerized compute node."
echo " --enable-check -- Enable checks on update."
echo " --overcloud-pingtest -- Run a tenant vm, attach and ping floating IP."
echo " --skip-pingtest-cleanup -- For debuging purposes, do not delete the created resources when performing a pingtest."
echo " --run-tempest -- Run tempest tests."
echo " --all, -a -- Run all of the above commands."
echo " -x -- enable tracing"
echo " --help, -h -- Print this help message."
echo
exit 1
}
if [ ${#@} = 0 ]; then
show_options
exit 1
fi
TEMP=$(getopt -o ,h \
-l,help,repo-setup,delorean-setup,delorean-build,multinode-setup,bootstrap-subnodes,undercloud,overcloud-images,register-nodes,introspect-nodes,overcloud-deploy,overcloud-update,overcloud-delete,use-containers,overcloud-pingtest,undercloud-upgrade,skip-pingtest-cleanup,all,enable-check,run-tempest \
-o,x,h,a \
-n $SCRIPT_NAME -- "$@")
if [ $? != 0 ]; then
show_options
exit 1
fi
# Note the quotes around `$TEMP': they are essential!
eval set -- "$TEMP"
ALL=${ALL:-""}
CONTAINER_ARGS=${CONTAINER_ARGS:-"-e /usr/share/openstack-tripleo-heat-templates/environments/docker.yaml -e /usr/share/openstack-tripleo-heat-templates/environments/docker-network.yaml --libvirt-type=qemu"}
STABLE_RELEASE=${STABLE_RELEASE:-}
DELOREAN_REPO_FILE=${DELOREAN_REPO_FILE:-"delorean.repo"}
DELOREAN_REPO_URL=${DELOREAN_REPO_URL:-"\
http://trunk.rdoproject.org/centos7/current-tripleo/"}
DELOREAN_STABLE_REPO_URL=${DELOREAN_STABLE_REPO_URL:-"\
https://trunk.rdoproject.org/centos7-$STABLE_RELEASE/current/"}
ATOMIC_URL=${ATOMIC_URL:-"https://download.fedoraproject.org/pub/alt/atomic/stable/Cloud-Images/x86_64/Images/Fedora-Cloud-Atomic-23-20160308.x86_64.qcow2"}
INSTACKENV_JSON_PATH=${INSTACKENV_JSON_PATH:-"$HOME/instackenv.json"}
INTROSPECT_NODES=${INTROSPECT_NODES:-""}
REGISTER_NODES=${REGISTER_NODES:-""}
OVERCLOUD_DEPLOY=${OVERCLOUD_DEPLOY:-""}
OVERCLOUD_DELETE=${OVERCLOUD_DELETE:-""}
OVERCLOUD_DELETE_TIMEOUT=${OVERCLOUD_DELETE_TIMEOUT:-"300"}
OVERCLOUD_DEPLOY_ARGS=${OVERCLOUD_DEPLOY_ARGS:-""}
OVERCLOUD_VALIDATE_ARGS=${OVERCLOUD_VALIDATE_ARGS-"--validation-errors-fatal --validation-warnings-fatal"}
OVERCLOUD_UPDATE=${OVERCLOUD_UPDATE:-""}
OVERCLOUD_UPDATE_RM_FILES=${OVERCLOUD_UPDATE_RM_FILES:-"1"}
OVERCLOUD_UPDATE_ARGS=${OVERCLOUD_UPDATE_ARGS:-"$OVERCLOUD_DEPLOY_ARGS $OVERCLOUD_VALIDATE_ARGS"}
OVERCLOUD_UPDATE_CHECK=${OVERCLOUD_UPDATE_CHECK:-}
OVERCLOUD_IMAGES_PATH=${OVERCLOUD_IMAGES_PATH:-"$HOME"}
OVERCLOUD_IMAGES=${OVERCLOUD_IMAGES:-""}
OVERCLOUD_IMAGES_ARGS=${OVERCLOUD_IMAGES_ARGS='--all'}
OVERCLOUD_NAME=${OVERCLOUD_NAME:-"overcloud"}
UNDERCLOUD_UPGRADE=${UNDERCLOUD_UPGRADE:-""}
UPGRADE_VERSION=${UPGRADE_VERSION:-"master"}
SKIP_PINGTEST_CLEANUP=${SKIP_PINGTEST_CLEANUP:-""}
OVERCLOUD_PINGTEST=${OVERCLOUD_PINGTEST:-""}
PINGTEST_TEMPLATE=${PINGTEST_TEMPLATE:-"tenantvm_floatingip"}
UNDERCLOUD_SANITY_CHECK=${UNDERCLOUD_SANITY_CHECK:-""}
REPO_SETUP=${REPO_SETUP:-""}
REPO_PREFIX=${REPO_PREFIX:-"/etc/yum.repos.d/"}
OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF=${OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF:-"\
$REPO_PREFIX/delorean.repo \
$REPO_PREFIX/delorean-current.repo \
$REPO_PREFIX/delorean-deps.repo"}
# Use Ceph/Jewel for all but liberty/mitaka
if [[ "${STABLE_RELEASE}" =~ ^(liberty|mitaka)$ ]] ; then
OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF=${OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF}"\
$REPO_PREFIX/CentOS-Ceph-Hammer.repo"
else
OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF=${OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF}"\
$REPO_PREFIX/CentOS-Ceph-Jewel.repo"
fi
DELOREAN_SETUP=${DELOREAN_SETUP:-""}
DELOREAN_BUILD=${DELOREAN_BUILD:-""}
MULTINODE_SETUP=${MULTINODE_SETUP:-""}
BOOTSTRAP_SUBNODES=${BOOTSTRAP_SUBNODES:-""}
STDERR=/dev/null
UNDERCLOUD=${UNDERCLOUD:-""}
UNDERCLOUD_CONF=${UNDERCLOUD_CONF:-"/usr/share/instack-undercloud/undercloud.conf.sample"}
TRIPLEO_ROOT=${TRIPLEO_ROOT:-$HOME/tripleo}
USE_CONTAINERS=${USE_CONTAINERS:-""}
TEMPEST_RUN=${TEMPEST_RUN:-""}
TEMPEST_ARGS=${TEMPEST_ARGS:-"--parallel --subunit"}
TEMPEST_ADD_CONFIG=${TEMPEST_ADD_CONFIG:-}
TEMPEST_REGEX=${TEMPEST_REGEX:-"^(?=(.*smoke))(?!(tempest.api.orchestration.stacks|tempest.scenario.test_volume_boot_pattern|tempest.api.telemetry))"}
TEMPEST_PINNED="95854ce727846110f3fc2946f3ed48f0ad189a2f"
SSH_OPTIONS=${SSH_OPTIONS:-'-o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=Verbose -o PasswordAuthentication=no -o ConnectionAttempts=32'}
export SCRIPTS_DIR=$(dirname ${BASH_SOURCE[0]:-$0})
OPSTOOLS_REPO_ENABLED=${OPSTOOLS_REPO_ENABLED:-"0"}
OPSTOOLS_REPO_URL=${OPSTOOLS_REPO_URL:-"https://raw.githubusercontent.com/centos-opstools/opstools-repo/master/opstools.repo"}
# TODO: remove this when Image create in openstackclient supports the v2 API
export OS_IMAGE_API_VERSION=1
# Temporary workarounds
while true ; do
case "$1" in
--all|-a ) ALL="1"; shift 1;;
--use-containers) USE_CONTAINERS="1"; shift 1;;
--enable-check) OVERCLOUD_UPDATE_CHECK="1"; shift 1;;
--introspect-nodes) INTROSPECT_NODES="1"; shift 1;;
--register-nodes) REGISTER_NODES="1"; shift 1;;
--overcloud-deploy) OVERCLOUD_DEPLOY="1"; shift 1;;
--overcloud-update) OVERCLOUD_UPDATE="1"; shift 1;;
--overcloud-delete) OVERCLOUD_DELETE="1"; shift 1;;
--overcloud-images) OVERCLOUD_IMAGES="1"; shift 1;;
--overcloud-pingtest) OVERCLOUD_PINGTEST="1"; shift 1;;
--skip-pingtest-cleanup) SKIP_PINGTEST_CLEANUP="1"; shift 1;;
--run-tempest) TEMPEST_RUN="1"; shift 1;;
--repo-setup) REPO_SETUP="1"; shift 1;;
--delorean-setup) DELOREAN_SETUP="1"; shift 1;;
--delorean-build) DELOREAN_BUILD="1"; shift 1;;
--undercloud) UNDERCLOUD="1"; shift 1;;
--undercloud-upgrade) UNDERCLOUD_UPGRADE="1"; shift 1;;
--multinode-setup) MULTINODE_SETUP="1"; shift 1;;
--bootstrap-subnodes) BOOTSTRAP_SUBNODES="1"; shift 1;;
-x) set -x; STDERR=/dev/stderr; shift 1;;
-h | --help) show_options 0;;
--) shift ; break ;;
*) echo "Error: unsupported option $1." ; exit 1 ;;
esac
done
##Begin TODO ccamacho: Remove when Liberty EOL: 2016-11-17
function openstack {
if [ "$1" == "stack" ] ; then
if [ -z "$STABLE_RELEASE" ]; then
/usr/bin/openstack $@
else
heat stack-${@:2:$#}
fi
else
/usr/bin/openstack $@
fi
}
##End TODO
function log {
echo "#################"
echo -n "$SCRIPT_NAME -- "
echo $@
echo "#################"
}
function source_rc {
if [ $1 = "stackrc" ] ; then cloud="Undercloud"; else cloud="Overcloud"; fi
echo "You must source a $1 file for the $cloud."
echo "Attempting to source $HOME/$1"
source $HOME/$1
echo "Done"
}
function stackrc_check {
source_rc "stackrc"
}
function overcloudrc_check {
source_rc "overcloudrc"
}
function repo_setup {
log "Repository setup"
sudo yum clean metadata
# sets $TRIPLEO_OS_FAMILY and $TRIPLEO_OS_DISTRO
source $(dirname ${BASH_SOURCE[0]:-$0})/set-os-type
if [ "$TRIPLEO_OS_DISTRO" = "centos" ]; then
# Enable Storage/SIG Ceph repo
if [[ "${STABLE_RELEASE}" =~ ^(liberty|mitaka)$ ]] ; then
rpm -q centos-release-ceph-hammer || sudo yum -y install --enablerepo=extras centos-release-ceph-hammer
sudo sed -i -e 's%gpgcheck=.*%gpgcheck=0%' $REPO_PREFIX/CentOS-Ceph-Hammer.repo
else
# TODO(gfidente): Replace with centos-release-ceph-jewel as above, when available
sudo yum-config-manager --add-repo https://raw.githubusercontent.com/CentOS-Storage-SIG/centos-release-ceph-jewel/master/CentOS-Ceph-Jewel.repo
sudo yum-config-manager --disable centos-ceph-jewel
sudo yum-config-manager --enable centos-ceph-jewel-test
sudo sed -i -e 's%gpgcheck=.*%gpgcheck=0%' $REPO_PREFIX/CentOS-Ceph-Jewel.repo
fi
fi
if [ -z "$STABLE_RELEASE" ]; then
# Enable the Delorean Deps repository
sudo curl -Lo $REPO_PREFIX/delorean-deps.repo http://trunk.rdoproject.org/centos7/delorean-deps.repo
sudo sed -i -e 's%priority=.*%priority=30%' $REPO_PREFIX/delorean-deps.repo
# Enable last known good RDO Trunk Delorean repository
sudo curl -Lo $REPO_PREFIX/delorean.repo $DELOREAN_REPO_URL/$DELOREAN_REPO_FILE
sudo sed -i -e 's%priority=.*%priority=20%' $REPO_PREFIX/delorean.repo
# Enable latest RDO Trunk Delorean repository
sudo curl -Lo $REPO_PREFIX/delorean-current.repo http://trunk.rdoproject.org/centos7/current/delorean.repo
sudo sed -i -e 's%priority=.*%priority=10%' $REPO_PREFIX/delorean-current.repo
sudo sed -i 's/\[delorean\]/\[delorean-current\]/' $REPO_PREFIX/delorean-current.repo
sudo /bin/bash -c "cat <<-EOF>>$REPO_PREFIX/delorean-current.repo
includepkgs=diskimage-builder,instack,instack-undercloud,os-apply-config,os-cloud-config,os-collect-config,os-net-config,os-refresh-config,python-tripleoclient,openstack-tripleo-common,openstack-tripleo-heat-templates,openstack-tripleo-image-elements,openstack-tripleo,openstack-tripleo-puppet-elements,openstack-puppet-modules,openstack-tripleo-ui,puppet-*
EOF"
else
# Enable the Delorean Deps repository
sudo curl -Lo $REPO_PREFIX/delorean-deps.repo http://trunk.rdoproject.org/centos7-$STABLE_RELEASE/delorean-deps.repo
sudo sed -i -e 's%priority=.*%priority=30%' $REPO_PREFIX/delorean-deps.repo
# Enable delorean current for the stable version
sudo curl -Lo $REPO_PREFIX/delorean.repo $DELOREAN_STABLE_REPO_URL/$DELOREAN_REPO_FILE
sudo sed -i -e 's%priority=.*%priority=20%' $REPO_PREFIX/delorean.repo
# Create empty delorean-current for dib image building
sudo sh -c "> $REPO_PREFIX/delorean-current.repo"
fi
# Install the yum-plugin-priorities package so that the Delorean repository
# takes precedence over the main RDO repositories.
sudo yum -y install yum-plugin-priorities
# Make sure EPEL is uninstalled.
if rpm --quiet -q epel-release; then
sudo rpm -e epel-release
fi
log "Repository setup - DONE."
}
function delorean_setup {
log "Delorean setup"
# Install delorean as per combination of toci-instack and delorean docs
sudo yum install -y createrepo git mock rpm-build yum-plugin-priorities yum-utils gcc
# NOTE(pabelanger): Check if virtualenv is already install, if not install
# from packages.
if ! command -v virtualenv ; then
sudo yum install -y python-virtualenv
fi
# Workaround until https://review.openstack.org/#/c/311734/ is merged and a new image is built
sudo yum install -y libffi-devel openssl-devel
# Add the current user to the mock group
sudo usermod -G mock -a $(id -nu)
mkdir -p $TRIPLEO_ROOT
[ -d $TRIPLEO_ROOT/delorean ] || git clone https://github.com/openstack-packages/delorean.git $TRIPLEO_ROOT/delorean
pushd $TRIPLEO_ROOT/delorean
sudo rm -rf data commits.sqlite
mkdir -p data
sed -i -e "s%reponame=.*%reponame=delorean-ci%" projects.ini
sed -i -e "s%target=.*%target=centos%" projects.ini
# Remove the rpm install test to speed up delorean (our ci test will to this)
# TODO: add an option for this in delorean
sed -i -e 's%--postinstall%%' scripts/build_rpm.sh
virtualenv venv
# NOTE(pabelanger): We need to update setuptools to the latest version for
# CentOS 7. Also, pytz is not declared as a dependency so we need to
# manually add it. Lastly, use pip install . to use wheel AFS pypi mirrors.
./venv/bin/pip install -U setuptools
./venv/bin/pip install pytz
./venv/bin/pip install .
popd
log "Delorean setup - DONE."
}
function delorean_build {
log "Delorean build"
export PATH=/sbin:/usr/sbin:$PATH
source $(dirname ${BASH_SOURCE[0]:-$0})/common_functions.sh
pushd $TRIPLEO_ROOT/delorean
if [ -z "$STABLE_RELEASE" ]; then
sed -i -e "s%baseurl=.*%baseurl=https://trunk.rdoproject.org/centos7%" projects.ini
sed -i -e "s%distro=.*%distro=rpm-master%" projects.ini
sed -i -e "s%source=.*%source=master%" projects.ini
else
sed -i -e "s%baseurl=.*%baseurl=https://trunk.rdoproject.org/centos7-$STABLE_RELEASE%" projects.ini
sed -i -e "s%distro=.*%distro=rpm-$STABLE_RELEASE%" projects.ini
sed -i -e "s%source=.*%source=stable/$STABLE_RELEASE%" projects.ini
fi
sudo rm -rf data commits.sqlite
mkdir -p data
# build packages
# loop through each of the projects listed in DELOREAN_BUILD_REFS, if it is a project we
# are capable of building an rpm for then build it.
# e.g. DELOREAN_BUILD_REFS="openstack/cinder openstack/heat etc.."
for PROJ in $DELOREAN_BUILD_REFS ; do
log "Building $PROJ"
PROJ=$(filterref $PROJ)
# Clone the repo if it doesn't yet exist
if [ ! -d $TRIPLEO_ROOT/$PROJ ]; then
git clone https://git.openstack.org/openstack/$PROJ.git $TRIPLEO_ROOT/$PROJ
if [ ! -z "$STABLE_RELEASE" ]; then
pushd $TRIPLEO_ROOT/$PROJ
git checkout -b stable/$STABLE_RELEASE origin/stable/$STABLE_RELEASE
popd
fi
fi
# Work around inconsistency where map-project-name expects oslo-*
MAPPED_NAME=$(echo $PROJ | sed "s/oslo./oslo-/")
MAPPED_PROJ=$(./venv/bin/python scripts/map-project-name $MAPPED_NAME || true)
[ -e data/$MAPPED_PROJ ] && continue
cp -r $TRIPLEO_ROOT/$PROJ data/$MAPPED_PROJ
pushd data/$MAPPED_PROJ
GITHASH=$(git rev-parse HEAD)
# Set the branches delorean reads to the same git hash as PROJ has left for us
for BRANCH in master origin/master stable/liberty origin/stable/liberty stable/mitaka origin/stable/mitaka; do
git checkout -b $BRANCH || git checkout $BRANCH
git reset --hard $GITHASH
done
popd
set +e
while true; do
DELOREANCMD="./venv/bin/dlrn --config-file projects.ini --head-only --package-name $MAPPED_PROJ --local --use-public --build-env http_proxy=${http_proxy:-} --info-repo rdoinfo"
# Using sudo to su a command as ourselves to run the command with a new login
# to ensure the addition to the mock group has taken effect.
sudo su $(id -nu) -c "$DELOREANCMD"
EXITCODE=$?
# delorean exits with 2 if the error is a network glitch, we can retry
if [ "$EXITCODE" == "2" ] ; then
continue
elif [ "$EXITCODE" == "0" ] ; then
break
fi
set -e
exit 1
done
set -e
done
popd
log "Delorean build - DONE."
}
function undercloud {
log "Undercloud install"
sudo yum install -y python-tripleoclient
if [ ! -f ~/undercloud.conf ]; then
cp -b -f $UNDERCLOUD_CONF ~/undercloud.conf
else
log "~/undercloud.conf already exists, not overwriting"
fi
# Hostname check, add to /etc/hosts if needed
if ! grep -E "^127.0.0.1\s*$HOSTNAME" /etc/hosts; then
sudo /bin/bash -c "echo \"127.0.0.1 $HOSTNAME\" >> /etc/hosts"
fi
openstack undercloud install
log "Undercloud install - DONE."
}
function overcloud_images {
log "Overcloud images"
log "Overcloud images saved in $OVERCLOUD_IMAGES_PATH"
if [[ "${STABLE_RELEASE}" =~ ^(liberty)$ ]] ; then
export FS_TYPE=ext4
fi
# (slagle) TODO: This needs to be fixed in python-tripleoclient or
# diskimage-builder!
# Ensure yum-plugin-priorities is installed
echo -e '#!/bin/bash\nyum install -y yum-plugin-priorities' | sudo tee /usr/share/diskimage-builder/elements/yum/pre-install.d/99-tmphacks
sudo chmod +x /usr/share/diskimage-builder/elements/yum/pre-install.d/99-tmphacks
# To install the undercloud instack-undercloud is run as root,
# as a result all of the git repositories get cached to
# ~root/.cache/image-create/source-repositories, lets not clone them again
if [ -d ~root/.cache/image-create/source-repositories ] && \
[ ! -d ~/.cache/image-create/source-repositories ] ; then
sudo cp -r ~root/.cache/image-create/source-repositories ~/.cache/image-create/source-repositories
sudo chown -R $(id -u) ~/.cache/image-create/source-repositories
fi
# Enable OpsTools repository
if [[ "$OPSTOOLS_REPO_ENABLED" == "1" ]]; then
sudo curl -Lo $TRIPLEO_ROOT/opstools.repo $OPSTOOLS_REPO_URL
export DIB_YUM_REPO_CONF="$OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF \
$TRIPLEO_ROOT/opstools.repo"
else
export DIB_YUM_REPO_CONF=$OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF
fi
log "Overcloud images saved in $OVERCLOUD_IMAGES_PATH"
pushd $OVERCLOUD_IMAGES_PATH
log "OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF=$OVERCLOUD_IMAGES_DIB_YUM_REPO_CONF"
openstack overcloud image build $OVERCLOUD_IMAGES_ARGS 2>&1 | \
tee -a overcloud-image-build.log
stackrc_check
openstack overcloud image upload --update-existing
popd
log "Overcloud images - DONE."
}
function register_nodes {
log "Register nodes"
if [ ! -f $INSTACKENV_JSON_PATH ]; then
echo Could not find instackenv.json at $INSTACKENV_JSON_PATH
echo Specify the path to instackenv.json with '$INSTACKENV_JSON_PATH'
exit 1
fi
stackrc_check
openstack baremetal import --json $INSTACKENV_JSON_PATH
ironic node-list
if [[ "${STABLE_RELEASE}" =~ ^(liberty|mitaka)$ ]] ; then
# This step is a part of the import command from Newton on
openstack baremetal configure boot
fi
log "Register nodes - DONE."
}
function introspect_nodes {
log "Introspect nodes"
stackrc_check
openstack baremetal introspection bulk start
log "Introspect nodes - DONE."
}
function overcloud_deploy {
log "Overcloud deploy"
# Force use of --templates
if [[ ! $OVERCLOUD_DEPLOY_ARGS =~ --templates ]]; then
OVERCLOUD_DEPLOY_ARGS="$OVERCLOUD_DEPLOY_ARGS --templates"
fi
stackrc_check
OVERCLOUD_DEPLOY_ARGS="$OVERCLOUD_DEPLOY_ARGS $OVERCLOUD_VALIDATE_ARGS"
if [[ $USE_CONTAINERS == 1 ]]; then
if ! glance image-list | grep -q atomic-image; then
wget --progress=dot:mega $ATOMIC_URL
glance image-create --name atomic-image --file `basename $ATOMIC_URL` --disk-format qcow2 --container-format bare
fi
#TODO: When container job is changed to network-isolation remove this
neutron subnet-update $(neutron net-list | grep ctlplane | cut -d ' ' -f 6) --dns-nameserver 8.8.8.8
OVERCLOUD_DEPLOY_ARGS="$OVERCLOUD_DEPLOY_ARGS $CONTAINER_ARGS"
fi
log "Overcloud create started."
exitval=0
openstack overcloud deploy $OVERCLOUD_DEPLOY_ARGS || exitval=1
if [ $exitval -eq 1 ];
then
log "Overcloud create - FAILED!"
exit 1
fi
log "Overcloud create - DONE."
}
function undercloud_upgrade {
log "Undercloud upgrade"
# Remove all Delorean repositories
sudo rm -f /etc/yum.repos.d/delorean*
# Setup repositories
repo_setup
# NOTE(emilien):
# If we don't stop OpenStack services before the upgrade, Puppet run will hang forever.
# This thing might be an ugly workaround but we need to to upgrade the undercloud.
# The question is: where to do it? in tripleoclient? or instack-undercloud?
sudo systemctl stop openstack-*
sudo systemctl stop neutron-*
# tripleo cli needs to be updated first
sudo yum -y update python-tripleoclient
# Upgrade the undercloud
openstack undercloud upgrade
log "Undercloud upgrade - Done."
}
function overcloud_update {
# Force use of --templates
if [[ ! $OVERCLOUD_UPDATE_ARGS =~ --templates ]]; then
OVERCLOUD_UPDATE_ARGS="$OVERCLOUD_UPDATE_ARGS --templates"
fi
stackrc_check
if heat stack-show "$OVERCLOUD_NAME" | grep "stack_status " | egrep "(CREATE|UPDATE)_COMPLETE"; then
FILE_PREFIX=$(date "+overcloud-update-resources-%s")
BEFORE_FILE="/tmp/${FILE_PREFIX}-before.txt"
AFTER_FILE="/tmp/${FILE_PREFIX}-after.txt"
# This is an update, so if enabled, compare the before/after resource lists
if [ ! -z "$OVERCLOUD_UPDATE_CHECK" ]; then
heat resource-list -n5 overcloud | awk '{print $2, $4, $6}' | sort > $BEFORE_FILE
fi
log "Overcloud update started."
exitval=0
openstack overcloud deploy $OVERCLOUD_UPDATE_ARGS || exitval=1
if [ $exitval -eq 1 ];
then
log "Overcloud update - FAILED!"
exit 1
fi
log "Overcloud update - DONE."
if [ ! -z "$OVERCLOUD_UPDATE_CHECK" ]; then
heat resource-list -n5 overcloud | awk '{print $2, $4, $6}' | sort > $AFTER_FILE
diff_rsrc=$(diff $BEFORE_FILE $AFTER_FILE)
if [ ! -z "$diff_rsrc" ]; then
log "Overcloud update - Completed but unexpected resource differences: $diff_rsrc"
exit 1
fi
fi
log "Overcloud update - DONE."
if [[ $OVERCLOUD_UPDATE_RM_FILES == 1 ]]; then
rm -f $BEFORE_FILE $AFTER_FILE
fi
else
log "Overcloud FAILED - No stack $OVERCLOUD_NAME."
exit 1
fi
}
function overcloud_delete {
log "Overcloud delete"
stackrc_check
# We delete the stack via heat, then wait for it to be deleted
# This should be fairly quick, but we poll for OVERCLOUD_DELETE_TIMEOUT
# NOTE(bnemec): We can't use the openstack function here because we need
# different behavior from what it does - we want to use the openstack
# command on everything except Liberty, and in Liberty we just
# call 'heat stack-delete --yes', on the versions that it's supported,
# or 'heat stack-delete' in the versions that don't support that flag.
# Note, we need the ID, not the name, as stack-show will only return
# soft-deleted stacks by ID (not name, as it may be reused)
OVERCLOUD_ID=$(openstack stack list | grep "$OVERCLOUD_NAME" | awk '{print $2}')
if [ "$STABLE_RELEASE" != "liberty" ]; then
wait_command="openstack stack show $OVERCLOUD_ID"
/usr/bin/openstack stack delete --yes "$OVERCLOUD_NAME"
else
wait_command="heat stack-show $OVERCLOUD_ID"
if heat stack-delete --help | grep -q "\-\-yes"; then
heat stack-delete --yes "$OVERCLOUD_NAME"
else
heat stack-delete "$OVERCLOUD_NAME"
fi
fi
if $(tripleo wait_for -w $OVERCLOUD_DELETE_TIMEOUT -d 10 -s "DELETE_COMPLETE" -- "$wait_command"); then
log "Overcloud $OVERCLOUD_ID DELETE_COMPLETE"
else
log "Overcloud $OVERCLOUD_ID delete failed or timed out:"
openstack stack show $OVERCLOUD_ID
exit 1
fi
}
function cleanup_pingtest {
log "Overcloud pingtest; cleaning environment"
overcloudrc_check
# NOTE(bnemec): We can't use the openstack function here because we need
# different behavior from what it does - we want to use the openstack
# command on everything except Liberty, and in Liberty we just
# call 'heat stack-delete --yes', on the versions that it's supported,
# or 'heat stack-delete' in the versions that don't support that flag.
if [ "$STABLE_RELEASE" != "liberty" ]; then
wait_command="openstack stack show tenant-stack"
/usr/bin/openstack stack delete --yes tenant-stack || true
else
wait_command="heat stack-show tenant-stack"
if heat stack-delete --help | grep -q "\-\-yes"; then
heat stack-delete --yes tenant-stack || true
else
heat stack-delete tenant-stack || true
fi
fi
if tripleo wait_for -w 300 -d 10 -s "Stack not found" -- "$wait_command"; then
log "Overcloud pingtest - deleted the tenant-stack heat stack"
else
log "Overcloud pingtest - time out waiting to delete tenant heat stack, please check manually"
fi
log "Overcloud pingtest - cleaning all 'pingtest_*' images"
openstack image list | grep pingtest | awk '{print $2}' | xargs -r -n1 openstack image delete || true
log "Overcloud pingtest - cleaning demo network 'nova'"
neutron net-delete nova || true
}
function overcloud_pingtest {
log "Overcloud pingtest"
exitval=0
overcloudrc_check
cleanup_pingtest
# NOTE(bnemec): We have to use the split cirros image here to avoid
# https://bugs.launchpad.net/cirros/+bug/1312199 With the separate
# kernel and ramdisk Nova will add the necessary kernel param for us.
IMAGE_PATH=$OVERCLOUD_IMAGES_PATH/cirros.img
INITRAMFS_PATH=$OVERCLOUD_IMAGES_PATH/cirros.initramfs
KERNEL_PATH=$OVERCLOUD_IMAGES_PATH/cirros.kernel
if [ ! -e $IMAGE_PATH -o ! -e $INITRAMFS_PATH -o ! -e $KERNEL_PATH ]; then
log "Overcloud pingtest, trying to download Cirros image"
curl -L -o $IMAGE_PATH http://download.cirros-cloud.net/0.3.4/cirros-0.3.4-x86_64-disk.img
curl -L -o $INITRAMFS_PATH http://download.cirros-cloud.net/0.3.4/cirros-0.3.4-x86_64-initramfs
curl -L -o $KERNEL_PATH http://download.cirros-cloud.net/0.3.4/cirros-0.3.4-x86_64-kernel
fi
log "Overcloud pingtest, uploading demo tenant image to glance"
ramdisk_id=$(openstack image create pingtest_initramfs --public --container-format ari --disk-format ari --file $INITRAMFS_PATH | grep ' id ' | awk '{print $4}')
kernel_id=$(openstack image create pingtest_kernel --public --container-format aki --disk-format aki --file $KERNEL_PATH | grep ' id ' | awk '{print $4}')
openstack image create pingtest_image --public --container-format ami --disk-format ami --property kernel_id=$kernel_id --property ramdisk_id=$ramdisk_id --file $IMAGE_PATH
log "Overcloud pingtest, creating external network"
neutron net-create nova --shared --router:external=True --provider:network_type flat \
--provider:physical_network datacentre
FLOATING_IP_CIDR=${FLOATING_IP_CIDR:-"192.0.2.0/24"}
FLOATING_IP_START=${FLOATING_IP_START:-"192.0.2.50"}
FLOATING_IP_END=${FLOATING_IP_END:-"192.0.2.64"}
EXTERNAL_NETWORK_GATEWAY=${EXTERNAL_NETWORK_GATEWAY:-"192.0.2.1"}
TENANT_STACK_DEPLOY_ARGS=${TENANT_STACK_DEPLOY_ARGS:-""}
neutron subnet-create --name ext-subnet --allocation-pool start=$FLOATING_IP_START,end=$FLOATING_IP_END --disable-dhcp --gateway $EXTERNAL_NETWORK_GATEWAY nova $FLOATING_IP_CIDR
TENANT_PINGTEST_TEMPLATE=/usr/share/tripleo-ci/$PINGTEST_TEMPLATE.yaml
if [ ! -e $TENANT_PINGTEST_TEMPLATE ]; then
TENANT_PINGTEST_TEMPLATE=$(dirname `readlink -f -- $0`)/../templates/$PINGTEST_TEMPLATE.yaml
fi
log "Overcloud pingtest, creating tenant-stack heat stack:"
heat stack-create -f $TENANT_PINGTEST_TEMPLATE $TENANT_STACK_DEPLOY_ARGS tenant-stack || exitval=1
# No point in waiting if the previous command failed.
if [ ${exitval} -eq 0 ]; then
# TODO(beagles): While the '-f' flag will short-circuit fail us, we'll
# likely have to wait for service operations to timeout before the
# stack gets marked as failed anyways. A CI oriented configuration for
# some key services *might* work for 'fail faster', but where things
# can be so slow already it might just cause more pain.
#
if tripleo wait_for -w 1200 -d 10 -s "CREATE_COMPLETE" -f "CREATE_FAILED" -- "heat stack-list | grep tenant-stack"; then
log "Overcloud pingtest, heat stack CREATE_COMPLETE";
vm1_ip=`heat output-show tenant-stack server1_public_ip -F raw`
# On new Heat clients the above command returns a big long string.
# If the resulting value is longer than an IP address we need the alternate command.
if [ ${#vm1_ip} -gt 15 ]; then
vm1_ip=`heat output-show tenant-stack server1_public_ip -F raw -v`
fi
log "Overcloud pingtest, trying to ping the floating IPs $vm1_ip"
if tripleo wait_for -w 360 -d 10 -s "bytes from $vm1_ip" -- "ping -c 1 $vm1_ip" ; then
ping -c 1 $vm1_ip
log "Overcloud pingtest, SUCCESS"
else
ping -c 1 $vm1_ip || :
nova show Server1 || :
nova service-list || :
neutron agent-list || :
nova console-log Server1 || :
log "Overcloud pingtest, FAIL"
exitval=1
fi
else
heat stack-show tenant-stack || :
heat event-list tenant-stack || :
heat resource-list -n 5 tenant-stack || :
log "Overcloud pingtest, failed to create heat stack, trying cleanup"
exitval=1
fi
else
log "Overcloud pingtest, stack create command failed immediately"
fi
if [ "$SKIP_PINGTEST_CLEANUP" != 1 ]; then
cleanup_pingtest
else
log "Overcloud pingtest, the resources created by the pingtest will remain until a new pingtest is executed."
fi
if [ $exitval -eq 0 ]; then
log "Overcloud pingtest SUCCEEDED"
else
log "Overcloud pingtest FAILED"
fi
exit $exitval
}
function clean_tempest {
neutron net-delete nova || echo "Cleaning tempest: no networks were created"
}
function tempest_run {
log "Running tempest"
overcloudrc_check
clean_tempest
root_dir=$(realpath $(dirname ${BASH_SOURCE[0]:-$0}))
[[ ! -e $HOME/tempest ]] && git clone https://github.com/openstack/tempest $HOME/tempest
pushd $HOME/tempest
git checkout $TEMPEST_PINNED
FLOATING_IP_CIDR=${FLOATING_IP_CIDR:-"192.0.2.0/24"};
FLOATING_IP_START=${FLOATING_IP_START:-"192.0.2.50"};
FLOATING_IP_END=${FLOATING_IP_END:-"192.0.2.64"};
export EXTERNAL_NETWORK_GATEWAY=${EXTERNAL_NETWORK_GATEWAY:-"192.0.2.1"};
neutron net-create nova --shared --router:external=True --provider:network_type flat --provider:physical_network datacentre;
neutron subnet-create --name ext-subnet --allocation-pool start=$FLOATING_IP_START,end=$FLOATING_IP_END --disable-dhcp --gateway $EXTERNAL_NETWORK_GATEWAY nova $FLOATING_IP_CIDR;
sudo yum install -y libffi-devel openssl-devel python-virtualenv
virtualenv --no-site-packages .venv
$HOME/tempest/tools/with_venv.sh pip install -U pip setuptools
$HOME/tempest/tools/with_venv.sh pip install junitxml httplib2 -r test-requirements.txt -r requirements.txt
cp $root_dir/config_tempest.py $HOME/tempest/tools/
cp $root_dir/api_discovery.py $HOME/tempest/tempest/common/
cp $root_dir/default-overrides.conf $HOME/tempest/etc/
sudo mkdir -p /var/log/tempest/ ||:
sudo mkdir -p /etc/tempest/ ||:
sudo chown $USER:$USER -R /var/log/tempest/
$HOME/tempest/tools/with_venv.sh python $HOME/tempest/tools/config_tempest.py \
--out etc/tempest.conf \
--debug \
--create \
--deployer-input ~/tempest-deployer-input.conf \
identity.uri $OS_AUTH_URL \
compute.allow_tenant_isolation true \
identity.admin_password $OS_PASSWORD \
compute.build_timeout 500 \
compute.image_ssh_user cirros \
orchestration.stack_owner_role _member_ \
compute.ssh_user cirros \
network.build_timeout 500 \
volume.build_timeout 500 \
DEFAULT.log_file "/var/log/tempest/tempest.log" \
scenario.ssh_user cirros $TEMPEST_ADD_CONFIG
sudo cp $HOME/tempest/etc/tempest.conf /etc/tempest/tempest.conf
[[ ! -e $HOME/tempest/.testrepository ]] && $HOME/tempest/tools/with_venv.sh testr init
$HOME/tempest/tools/with_venv.sh testr run \
$TEMPEST_ARGS \
$TEMPEST_REGEX | \
tee >( $HOME/tempest/tools/with_venv.sh subunit2junitxml --output-to=/var/log/tempest/tempest.xml ) | \
$HOME/tempest/tools/with_venv.sh subunit-trace --no-failure-debug -f 2>&1 | \
tee /var/log/tempest/tempest_console.log && exitval=0 || exitval=$?
$HOME/tempest/tools/with_venv.sh subunit2html $HOME/tempest/.testrepository/$(ls -t $HOME/tempest/.testrepository/ | grep -e "[0-9]" | head -1) /var/log/tempest/tempest.html
exit ${exitval}
}
function clone {
local repo=$1
log "$0 requires $repo to be cloned at \$TRIPLEO_ROOT ($TRIPLEO_ROOT)"
if [ ! -d $TRIPLEO_ROOT/$(basename $repo) ]; then
echo "$repo not found at $TRIPLEO_ROOT/$repo, git cloning."
pushd $TRIPLEO_ROOT
git clone https://git.openstack.org/$repo
popd
else
echo "$repo found at $TRIPLEO_ROOT/$repo, nothing to do."
fi
}
function multinode_setup {
log "Multinode Setup"
clone openstack-dev/devstack
clone openstack-infra/devstack-gate
# $BASE is expected by devstack/functions-common
# which is sourced by devstack-gate/functions.sh
# It should be the parent directory of the "new" directory where
# zuul-cloner has checked out the repositories
log "Sourcing devstack-gate/functions.sh"
export BASE=${BASE:-"/opt/stack"}
set +u
source $TRIPLEO_ROOT/devstack-gate/functions.sh
set -u
PUB_BRIDGE_NAME=${PUB_BRIDGE_NAME:-"br-ex"}
local primary_node
primary_node=$(cat /etc/nodepool/primary_node_private)
local sub_nodes
sub_nodes=$(cat /etc/nodepool/sub_nodes_private)
for ip in $sub_nodes; do
# Do repo setup so openvswitch package is available on subnodes. Will
# be installed by ovs_vxlan_bridge function below.
log "Running --repo-setup on $ip"
ssh $SSH_OPTIONS -t -i /etc/nodepool/id_rsa $ip \
$TRIPLEO_ROOT/tripleo-ci/scripts/tripleo.sh --repo-setup
done
# Create OVS vxlan bridges
# If br-ctlplane already exists on this node, we need to bring it down
# first, then bring it back up after calling ovs_vxlan_bridge. This ensures
# that the route added to br-ex by ovs_vxlan_bridge will be preferred over
# the br-ctlplane route. If it's not preferred, multinode connectivity
# across the vxlan bridge will not work.
if [ -f /etc/sysconfig/network-scripts/ifcfg-br-ctlplane ]; then
sudo ifdown br-ctlplane
fi
set +u
log "Running ovs_vxlan_bridge"
ovs_vxlan_bridge $PUB_BRIDGE_NAME $primary_node "True" 2 192.0.2 24 $sub_nodes
set -u
log "Setting $PUB_BRIDGE_NAME up on $primary_node"
sudo ip link set dev $PUB_BRIDGE_NAME up
if [ -f /etc/sysconfig/network-scripts/ifcfg-br-ctlplane ]; then
sudo ifup br-ctlplane
fi
# Restart neutron-openvswitch-agent if it's enabled, since it may have
# terminated when br-ctlplane was down
if [ $(sudo systemctl is-enabled neutron-openvswitch-agent) = 'enabled' ]; then
sudo systemctl reset-failed neutron-openvswitch-agent
sudo systemctl restart neutron-openvswitch-agent
fi
local ping_command="ping -c 6 -W 3 192.0.2.2"
for ip in $sub_nodes; do
log "Setting $PUB_BRIDGE_NAME up on $ip"
ssh $SSH_OPTIONS -t -i /etc/nodepool/id_rsa $ip \
sudo ip link set dev $PUB_BRIDGE_NAME up
log "Pinging from $ip"
if ! remote_command $ip $ping_command; then
log "Pinging from $ip failed, restarting openvswitch"
remote_command $ip sudo systemctl restart openvswitch
if ! remote_command $ip $ping_command; then
log "Pinging from $ip still failed after restarting openvswitch"
exit 1
fi
fi
done
log "Multinode Setup - DONE".
}
function undercloud_sanity_check {
set -x
stackrc_check
openstack user list
openstack catalog list
nova service-list
glance image-list
neutron subnet-list
neutron net-list
neutron agent-list
ironic node-list
openstack stack list
set +x
}
function bootstrap_subnodes {
log "Bootstrap subnodes"
local sub_nodes
sub_nodes=$(cat /etc/nodepool/sub_nodes_private)
for ip in $sub_nodes; do
log "Bootstrapping $ip"
log "Running --repo-setup on $ip"
# Do repo setup
ssh $SSH_OPTIONS -t -i /etc/nodepool/id_rsa $ip \
$TRIPLEO_ROOT/tripleo-ci/scripts/tripleo.sh --repo-setup
# Run overcloud full bootstrap script
log "Running bootstrap-overcloud-full.sh on $ip"
ssh $SSH_OPTIONS -t -i /etc/nodepool/id_rsa $ip \
$TRIPLEO_ROOT/tripleo-ci/scripts/bootstrap-overcloud-full.sh
done
log "Bootstrap subnodes - DONE".
}
if [ "$REPO_SETUP" = 1 ]; then
repo_setup
fi
if [ "$DELOREAN_SETUP" = 1 ]; then
delorean_setup
fi
if [ "$DELOREAN_BUILD" = 1 ]; then
export DELOREAN_BUILD_REFS="${DELOREAN_BUILD_REFS:-$@}"
if [ -z "$DELOREAN_BUILD_REFS" ]; then
echo "Usage: $0 --delorean-build openstack/heat openstack/nova"
exit 1
fi
delorean_build
fi
if [ "$UNDERCLOUD" = 1 ]; then
undercloud
if [ "$UNDERCLOUD_SANITY_CHECK" = 1 ]; then
undercloud_sanity_check
fi
fi
if [ "$OVERCLOUD_IMAGES" = 1 ]; then
overcloud_images
fi
if [ "$REGISTER_NODES" = 1 ]; then
register_nodes
fi
if [ "$INTROSPECT_NODES" = 1 ]; then
introspect_nodes
fi
if [ "$OVERCLOUD_DEPLOY" = 1 ]; then
overcloud_deploy
fi
if [ "$OVERCLOUD_UPDATE" = 1 ]; then
overcloud_update
fi
if [ "$OVERCLOUD_DELETE" = 1 ]; then
overcloud_delete
fi
if [[ "$USE_CONTAINERS" == 1 && "$OVERCLOUD_DEPLOY" != 1 ]]; then
echo "Error: --overcloud-deploy flag is required with the flag --use-containers"
exit 1
fi
if [ "$OVERCLOUD_PINGTEST" = 1 ]; then
overcloud_pingtest
fi
if [ "$TEMPEST_RUN" = 1 ]; then
tempest_run
fi
if [ "$UNDERCLOUD_UPGRADE" = 1 ]; then
undercloud_upgrade
fi
if [ "$MULTINODE_SETUP" = 1 ]; then
multinode_setup
fi
if [ "$BOOTSTRAP_SUBNODES" = 1 ]; then
bootstrap_subnodes
fi
if [ "$ALL" = 1 ]; then
repo_setup
undercloud
overcloud_images
register_nodes
introspect_nodes
overcloud_deploy
fi
View Git Blame Copy Permalink