---
version: '2.0'
name: tripleo.baremetal.v1
description: TripleO Baremetal Workflows

workflows:

  set_node_state:
    input:
      - node_uuid
      - state_action
      - target_state

    tags:
      - tripleo-common-managed

    tasks:

      set_provision_state:
        on-success: wait_for_provision_state
        action: ironic.node_set_provision_state node_uuid=<% $.node_uuid %> state=<% $.state_action %>

      wait_for_provision_state:
        action: ironic.node_get node_id=<% $.node_uuid %>
        timeout: 1200 #20 minutes
        retry:
          delay: 3
          count: 400
          continue-on: <% task(wait_for_provision_state).result.provision_state != $.target_state %>

  set_power_state:
    input:
      - node_uuid
      - state_action
      - target_state

    tags:
      - tripleo-common-managed

    tasks:

      set_provision_state:
        on-success: wait_for_power_state
        action: ironic.node_set_power_state node_id=<% $.node_uuid %> state=<% $.state_action %>

      wait_for_power_state:
        action: ironic.node_get node_id=<% $.node_uuid %>
        timeout: 120 #2 minutes
        retry:
          delay: 6
          count: 20
          continue-on: <% task(wait_for_power_state).result.power_state != $.target_state %>

  manual_cleaning:
    input:
      - node_uuid
      - clean_steps
      - timeout: 7200  # 2 hours (cleaning can take really long)
      - retry_delay: 10
      - retry_count: 720
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      set_provision_state:
        on-success: wait_for_provision_state
        on-error: set_provision_state_failed
        action: ironic.node_set_provision_state node_uuid=<% $.node_uuid %> state='clean' cleansteps=<% $.clean_steps %>

      set_provision_state_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(set_provision_state).result %>

      wait_for_provision_state:
        on-success: send_message
        action: ironic.node_get node_id=<% $.node_uuid %>
        timeout: <% $.timeout %>
        retry:
          delay: <% $.retry_delay %>
          count: <% $.retry_count %>
          continue-on: <% task(wait_for_provision_state).result.provision_state != 'manageable' %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.manual_cleaning
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  validate_nodes:
    description: Validate nodes JSON

    input:
     - nodes_json
     - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      validate_nodes:
        action: tripleo.baremetal.validate_nodes
        on-success: send_message
        on-error: validation_failed
        input:
           nodes_json: <% $.nodes_json %>

      validation_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(validate_nodes).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.validate_nodes
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  register_or_update:
    description: Take nodes JSON and create nodes in a "manageable" state

    input:
     - nodes_json
     - remove: False
     - queue_name: tripleo
     - kernel_name: null
     - ramdisk_name: null
     - instance_boot_option: local
     - initial_state: manageable

    tags:
      - tripleo-common-managed

    tasks:

      validate_input:
        workflow: tripleo.baremetal.v1.validate_nodes
        on-success: register_or_update_nodes
        on-error: validation_failed
        input:
          nodes_json: <% $.nodes_json %>
          queue_name: <% $.queue_name %>

      validation_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(validate_input).result %>
          registered_nodes: []

      register_or_update_nodes:
        action: tripleo.baremetal.register_or_update_nodes
        on-success:
          - set_nodes_managed: <% $.initial_state != "enroll" %>
          - send_message: <% $.initial_state = "enroll" %>
        on-error: set_status_failed_register_or_update_nodes
        input:
           nodes_json: <% $.nodes_json %>
           remove: <% $.remove %>
           kernel_name: <% $.kernel_name %>
           ramdisk_name: <% $.ramdisk_name %>
           instance_boot_option: <% $.instance_boot_option %>
        publish:
          registered_nodes: <% task(register_or_update_nodes).result %>
          new_nodes: <% task(register_or_update_nodes).result.where($.provision_state = 'enroll') %>

      set_status_failed_register_or_update_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(register_or_update_nodes).result %>
          registered_nodes: []

      set_nodes_managed:
        on-success:
          - set_nodes_available: <% $.initial_state = "available" %>
          - send_message: <% $.initial_state != "available" %>
        on-error: set_status_failed_nodes_managed
        workflow: tripleo.baremetal.v1.manage
        input:
          node_uuids: <% $.new_nodes.uuid %>
          queue_name: <% $.queue_name %>
        publish:
          status: SUCCESS
          message: Nodes set to managed.

      set_status_failed_nodes_managed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(set_nodes_managed).result %>

      set_nodes_available:
        on-success: send_message
        on-error: set_status_failed_nodes_available
        workflow: tripleo.baremetal.v1.provide node_uuids=<% $.new_nodes.uuid %> queue_name=<% $.queue_name %>
        publish:
          status: SUCCESS
          message: Nodes set to available.

      set_status_failed_nodes_available:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(set_nodes_available).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.register_or_update
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
                registered_nodes: <% $.registered_nodes or [] %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  provide:
    description: Take a list of nodes and move them to "available"

    input:
      - node_uuids
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      set_nodes_available:
        on-success: cell_v2_discover_hosts
        on-error: set_status_failed_nodes_available
        with-items: uuid in <% $.node_uuids %>
        workflow: tripleo.baremetal.v1.set_node_state
        input:
          node_uuid: <% $.uuid %>
          queue_name: <% $.queue_name %>
          state_action: 'provide'
          target_state: 'available'

      set_status_failed_nodes_available:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(set_nodes_available).result %>

      cell_v2_discover_hosts:
        on-success: try_power_off
        on-error: cell_v2_discover_hosts_failed
        workflow: tripleo.baremetal.v1.cellv2_discovery
        input:
          node_uuids: <% $.node_uuids %>
          queue_name: <% $.queue_name %>
        timeout: 900 #15 minutes
        retry:
          delay: 30
          count: 30

      cell_v2_discover_hosts_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(cell_v2_discover_hosts).result %>

      try_power_off:
        on-success: send_message
        on-error: power_off_failed
        with-items: uuid in <% $.node_uuids %>
        workflow: tripleo.baremetal.v1.set_power_state
        input:
          node_uuid: <% $.uuid %>
          queue_name: <% $.queue_name %>
          state_action: 'off'
          target_state: 'power off'
        publish:
          status: SUCCESS
          message: 'Successfully set nodes state to available.'

      power_off_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(try_power_off).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.provide
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  provide_manageable_nodes:
    description: Provide all nodes in a 'manageable' state.

    input:
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      get_manageable_nodes:
        action: ironic.node_list maintenance=False associated=False
        on-success: provide_manageable
        on-error: set_status_failed_get_manageable_nodes
        publish:
          managed_nodes: <% task(get_manageable_nodes).result.where($.provision_state = 'manageable').uuid %>

      set_status_failed_get_manageable_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_manageable_nodes).result %>

      provide_manageable:
        on-success: send_message
        workflow: tripleo.baremetal.v1.provide
        input:
          node_uuids: <% $.managed_nodes %>
          queue_name: <% $.queue_name %>
        publish:
          status: SUCCESS

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.provide_manageable_nodes
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  manage:
    description: Set a list of nodes to 'manageable' state

    input:
      - node_uuids
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      set_nodes_manageable:
        on-success: send_message
        on-error: set_status_failed_nodes_manageable
        with-items: uuid in <% $.node_uuids %>
        workflow: tripleo.baremetal.v1.set_node_state
        input:
          node_uuid: <% $.uuid %>
          state_action: 'manage'
          target_state: 'manageable'

      set_status_failed_nodes_manageable:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(set_nodes_manageable).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.manage
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  _introspect:
    description: >
        An internal workflow. The tripleo.baremetal.v1.introspect workflow
        should be used for introspection.

    input:
      - node_uuid
      - timeout
      - queue_name

    output:
      result: <% task(start_introspection).result %>

    tags:
      - tripleo-common-managed

    tasks:
      start_introspection:
        action: baremetal_introspection.introspect uuid=<% $.node_uuid %>
        on-success: wait_for_introspection_to_finish
        on-error: set_status_failed_start_introspection

      set_status_failed_start_introspection:
        publish:
          status: FAILED
          message: <% task(start_introspection).result %>
          introspected_nodes: []
        on-success: send_message

      wait_for_introspection_to_finish:
        action: baremetal_introspection.wait_for_finish
        input:
          uuids: <% [$.node_uuid] %>
          # The interval is 10 seconds, so divide to make the overall timeout
          # in seconds correct.
          max_retries: <% $.timeout / 10 %>
          retry_interval: 10
        publish:
          introspected_node: <% task().result.values().first() %>
          status: <% bool(task().result.values().first().error) and "FAILED" or "SUCCESS" %>
        publish-on-error:
          status: FAILED
          message: <% task().result %>
        on-success: wait_for_introspection_to_finish_success
        on-error: wait_for_introspection_to_finish_error

      wait_for_introspection_to_finish_success:
        publish:
          message: <% "Introspection of node {0} completed. Status:{1}. Errors:{2}".format($.introspected_node.uuid, $.status, $.introspected_node.error) %>
        on-success: send_message

      wait_for_introspection_to_finish_error:
        publish:
          message: <% "Introspection of node {0} timed out.".format($.node_uuid) %>
        on-success: send_message

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1._introspect
              payload:
                status: <% $.status %>
                message: <% $.message %>
                introspected_node: <% $.get('introspected_node') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  introspect:
    description: >
        Take a list of nodes and move them through introspection.

        By default each node will attempt introspection up to 3 times (two
        retries plus the initial attemp) if it fails. This behaviour can be
        modified by changing the max_retry_attempts input.

        The workflow will assume the node has timed out after 20 minutes (1200
        seconds). This can be changed by passing the node_timeout input in
        seconds.

    input:
      - node_uuids
      - run_validations: False
      - queue_name: tripleo
      - concurrency: 20
      - max_retry_attempts: 2
      - node_timeout: 1200

    tags:
      - tripleo-common-managed

    task-defaults:
      on-error: unhandled_error

    tasks:
      initialize:
        publish:
          introspection_attempt: 1
        on-complete:
          - run_validations: <% $.run_validations %>
          - introspect_nodes: <% not $.run_validations %>

      run_validations:
        workflow: tripleo.validations.v1.run_groups
        input:
          group_names:
            - 'pre-introspection'
          queue_name: <% $.queue_name %>
        on-success: introspect_nodes
        on-error: set_validations_failed

      set_validations_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(run_validations).result %>

      introspect_nodes:
        with-items: uuid in <% $.node_uuids %>
        concurrency: <% $.concurrency %>
        workflow: _introspect
        input:
          node_uuid: <% $.uuid %>
          queue_name: <% $.queue_name %>
          timeout: <% $.node_timeout %>
        # on-error is triggered if one or more nodes failed introspection. We
        # still go to get_introspection_status as it will collect the result
        # for each node. Unless we hit the retry limit.
        on-error:
         - get_introspection_status: <% $.introspection_attempt <= $.max_retry_attempts %>
         - max_retry_attempts_reached: <% $.introspection_attempt > $.max_retry_attempts %>
        on-success: get_introspection_status

      get_introspection_status:
        with-items: uuid in <% $.node_uuids %>
        action: baremetal_introspection.get_status
        input:
          uuid: <% $.uuid%>
        publish:
          introspected_nodes: <% task().result.toDict($.uuid, $) %>
          # Currently there is no way for us to ignore user introspection
          # aborts. This means we will retry aborted nodes until the Ironic API
          # gives us more details (error code or a boolean to show aborts etc.)
          # If a node hasn't finished, we consider it to be failed.
          # TODO(d0ugal): When possible, don't retry introspection of nodes
          #               that a user manually aborted.
          failed_introspection: <% task().result.where($.finished = true and $.error != null) + task().result.where($.finished = false) %>
        on-error: increase_attempt_counter
        on-success:
          - successful_introspection: <% $.failed_introspection.len() = 0 %>
          - increase_attempt_counter: <% $.failed_introspection.len() > 0 %>

      increase_attempt_counter:
        publish:
          introspection_attempt: <% $.introspection_attempt + 1 %>
        on-complete:
          retry_failed_nodes

      retry_failed_nodes:
        publish:
          status: RUNNING
          message: <% 'Retrying {0} nodes that failed introspection. Attempt {1} of {2} '.format($.failed_introspection.len(), $.introspection_attempt, $.max_retry_attempts + 1) %>
          # We are about to retry, update the tracking stats.
          node_uuids: <% $.failed_introspection.select($.uuid) %>
        on-success:
          - send_message
          - introspect_nodes

      max_retry_attempts_reached:
        publish:
          status: FAILED
          message: <% 'Retry limit reached with {0} nodes still failing introspection'.format($.failed_introspection.len()) %>
        on-complete: send_message

      successful_introspection:
        publish:
          status: SUCCESS
          message: 'Successfully introspected nodes.'
        on-complete: send_message

      unhandled_error:
        publish:
          status: FAILED
          message: "Unhandled workflow error"
        on-complete: send_message

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.introspect
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
                introspected_nodes: <% $.get('introspected_nodes', []) %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  introspect_manageable_nodes:
    description: Introspect all nodes in a 'manageable' state.

    input:
      - run_validations: False
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      get_manageable_nodes:
        action: ironic.node_list maintenance=False associated=False
        on-success: introspect_manageable
        on-error: set_status_failed_get_manageable_nodes
        publish:
          managed_nodes: <% task(get_manageable_nodes).result.where($.provision_state = 'manageable').uuid %>

      set_status_failed_get_manageable_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_manageable_nodes).result %>

      introspect_manageable:
        on-success: send_message
        on-error: set_status_introspect_manageable
        workflow: tripleo.baremetal.v1.introspect
        input:
          node_uuids: <% $.managed_nodes %>
          run_validations: <% $.run_validations %>
          queue_name: <% $.queue_name %>
        publish:
          introspected_nodes: <% task(introspect_manageable).result.introspected_nodes %>
          message: 'Nodes introspected successfully.'

      set_status_introspect_manageable:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(introspect_manageable).result %>
          introspected_nodes: []

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.introspect_manageable_nodes
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
                introspected_nodes: <% $.get('introspected_nodes', []) %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  configure:
    description: Take a list of manageable nodes and update their boot configuration.

    input:
      - node_uuids
      - queue_name: tripleo
      - kernel_name: bm-deploy-kernel
      - ramdisk_name: bm-deploy-ramdisk
      - instance_boot_option: null
      - root_device: null
      - root_device_minimum_size: 4
      - overwrite_root_device_hints: False

    tags:
      - tripleo-common-managed

    tasks:

      configure_boot:
        on-success: configure_root_device
        on-error: set_status_failed_configure_boot
        with-items: node_uuid in <% $.node_uuids %>
        action: tripleo.baremetal.configure_boot node_uuid=<% $.node_uuid %> kernel_name=<% $.kernel_name %> ramdisk_name=<% $.ramdisk_name %> instance_boot_option=<% $.instance_boot_option %>

      configure_root_device:
        on-success: send_message
        on-error: set_status_failed_configure_root_device
        with-items: node_uuid in <% $.node_uuids %>
        action: tripleo.baremetal.configure_root_device node_uuid=<% $.node_uuid %> root_device=<% $.root_device %> minimum_size=<% $.root_device_minimum_size %> overwrite=<% $.overwrite_root_device_hints %>
        publish:
          status: SUCCESS
          message: 'Successfully configured the nodes.'

      set_status_failed_configure_boot:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(configure_boot).result %>

      set_status_failed_configure_root_device:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(configure_root_device).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.configure
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  configure_manageable_nodes:
    description: Update the boot configuration of all nodes in 'manageable' state.

    input:
      - queue_name: tripleo
      - kernel_name: 'bm-deploy-kernel'
      - ramdisk_name: 'bm-deploy-ramdisk'
      - instance_boot_option: null
      - root_device: null
      - root_device_minimum_size: 4
      - overwrite_root_device_hints: False

    tags:
      - tripleo-common-managed

    tasks:

      get_manageable_nodes:
        action: ironic.node_list maintenance=False associated=False
        on-success: configure_manageable
        on-error: set_status_failed_get_manageable_nodes
        publish:
          managed_nodes: <% task(get_manageable_nodes).result.where($.provision_state = 'manageable').uuid %>

      configure_manageable:
        on-success: send_message
        on-error: set_status_failed_configure_manageable
        workflow: tripleo.baremetal.v1.configure
        input:
          node_uuids: <% $.managed_nodes %>
          queue_name: <% $.queue_name %>
          kernel_name: <% $.kernel_name %>
          ramdisk_name: <% $.ramdisk_name %>
          instance_boot_option: <% $.instance_boot_option %>
          root_device: <% $.root_device %>
          root_device_minimum_size: <% $.root_device_minimum_size %>
          overwrite_root_device_hints: <% $.overwrite_root_device_hints %>
        publish:
          message: 'Manageable nodes configured successfully.'

      set_status_failed_configure_manageable:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(configure_manageable).result %>

      set_status_failed_get_manageable_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_manageable_nodes).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.configure_manageable_nodes
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  tag_node:
    description: Tag a node with a role
    input:
      - node_uuid
      - role: null
      - queue_name: tripleo

    task-defaults:
      on-error: send_message

    tags:
      - tripleo-common-managed

    tasks:

      update_node:
        on-success: send_message
        action: tripleo.baremetal.update_node_capability node_uuid=<% $.node_uuid %> capability='profile' value=<% $.role %>
        publish:
          message: <% task(update_node).result %>
          status: SUCCESS

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.tag_node
              payload:
                status: <% $.get('status', 'FAILED') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  tag_nodes:
    description: Runs the tag_node workflow in a loop
    input:
      - tag_node_uuids
      - untag_node_uuids
      - role
      - plan: overcloud
      - queue_name: tripleo

    task-defaults:
      on-error: send_message

    tags:
      - tripleo-common-managed

    tasks:

      tag_nodes:
        with-items: node_uuid in <% $.tag_node_uuids %>
        workflow: tripleo.baremetal.v1.tag_node
        input:
          node_uuid: <% $.node_uuid %>
          queue_name: <% $.queue_name %>
          role: <% $.role %>
        concurrency: 1
        on-success: untag_nodes

      untag_nodes:
        with-items: node_uuid in <% $.untag_node_uuids %>
        workflow: tripleo.baremetal.v1.tag_node
        input:
          node_uuid: <% $.node_uuid %>
          queue_name: <% $.queue_name %>
        concurrency: 1
        on-success: update_role_parameters

      update_role_parameters:
        on-success: send_message
        action: tripleo.parameters.update_role role=<% $.role %> container=<% $.plan %>
        publish:
          message: <% task(update_role_parameters).result %>
          status: SUCCESS

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.tag_nodes
              payload:
                status: <% $.get('status', 'FAILED') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  nodes_with_hint:
    description: Find nodes matching a hint regex
    input:
      - hint_regex
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:
      get_nodes:
        with-items: provision_state in <% ['available', 'active'] %>
        action: ironic.node_list maintenance=false provision_state=<% $.provision_state %> detail=true
        on-success: get_matching_nodes
        on-error: set_status_failed_get_nodes

      get_matching_nodes:
        with-items: node in <% task(get_nodes).result.flatten() %>
        action: tripleo.baremetal.get_node_hint node=<% $.node %>
        on-success: send_message
        on-error: set_status_failed_get_matching_nodes
        publish:
          matching_nodes: <% let(hint_regex => $.hint_regex) -> task().result.where($.hint and $.hint.matches($hint_regex)).uuid %>

      set_status_failed_get_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_nodes).result %>

      set_status_failed_get_matching_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_matching_nodes).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.nodes_with_hint
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
                matching_nodes: <% $.matching_nodes or [] %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  nodes_with_profile:
    description: Find nodes with a specific profile
    input:
      - profile
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:
      get_active_nodes:
        action: ironic.node_list maintenance=false provision_state='active' detail=true
        on-success: get_available_nodes
        on-error: set_status_failed_get_active_nodes

      get_available_nodes:
        action: ironic.node_list maintenance=false provision_state='available' detail=true
        on-success: get_matching_nodes
        on-error: set_status_failed_get_available_nodes

      get_matching_nodes:
        with-items: node in <% task(get_available_nodes).result + task(get_active_nodes).result %>
        action: tripleo.baremetal.get_profile node=<% $.node %>
        on-success: send_message
        on-error: set_status_failed_get_matching_nodes
        publish:
          matching_nodes: <% let(input_profile_name => $.profile) -> task(get_matching_nodes).result.where($.profile = $input_profile_name).uuid %>

      set_status_failed_get_active_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_active_nodes).result %>

      set_status_failed_get_available_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_available_nodes).result %>

      set_status_failed_get_matching_nodes:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_matching_nodes).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.nodes_with_profile
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
                matching_nodes: <% $.matching_nodes or [] %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  create_raid_configuration:
    description: Create and apply RAID configuration for given nodes
    input:
      - node_uuids
      - configuration
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      set_configuration:
        with-items: node_uuid in <% $.node_uuids %>
        action: ironic.node_set_target_raid_config node_ident=<% $.node_uuid %> target_raid_config=<% $.configuration %>
        on-success: apply_configuration
        on-error: set_configuration_failed

      set_configuration_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(set_configuration).result %>

      apply_configuration:
        with-items: node_uuid in <% $.node_uuids %>
        workflow: tripleo.baremetal.v1.manual_cleaning
        input:
          node_uuid: <% $.node_uuid %>
          clean_steps:
            - interface: raid
              step: delete_configuration
            - interface: raid
              step: create_configuration
          timeout: 1800  # building RAID should be fast than general cleaning
          retry_count: 180
          retry_delay: 10
        on-success: send_message
        on-error: apply_configuration_failed
        publish:
          message: <% task(apply_configuration).result %>
          status: SUCCESS

      apply_configuration_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(apply_configuration).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.create_raid_configuration
              payload:
                status: <% $.get('status', 'FAILED') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>


  cellv2_discovery:
    description: Run cell_v2 host discovery

    input:
      - node_uuids
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      cell_v2_discover_hosts:
        on-success: wait_for_nova_resources
        on-error: cell_v2_discover_hosts_failed
        action: tripleo.baremetal.cell_v2_discover_hosts

      cell_v2_discover_hosts_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(cell_v2_discover_hosts).result %>

      wait_for_nova_resources:
        on-success: send_message
        on-error: wait_for_nova_resources_failed
        with-items: node_uuid in <% $.node_uuids %>
        action: nova.hypervisors_find hypervisor_hostname=<% $.node_uuid %>

      wait_for_nova_resources_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(wait_for_nova_resources).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.cellv2_discovery
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>


  discover_nodes:
    description: Run nodes discovery over the given IP range

    input:
      - ip_addresses
      - credentials
      - ports: [623]
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      get_all_nodes:
        action: ironic.node_list
        input:
          fields: ["uuid", "driver", "driver_info"]
          limit: 0
        on-success: get_candidate_nodes
        on-error: get_all_nodes_failed
        publish:
          existing_nodes: <% task(get_all_nodes).result %>

      get_all_nodes_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_all_nodes).result %>

      get_candidate_nodes:
        action: tripleo.baremetal.get_candidate_nodes
        input:
          ip_addresses: <% $.ip_addresses %>
          credentials: <% $.credentials %>
          ports: <% $.ports %>
          existing_nodes: <% $.existing_nodes %>
        on-success: probe_nodes
        on-error: get_candidate_nodes_failed
        publish:
          candidates: <% task(get_candidate_nodes).result %>

      get_candidate_nodes_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(get_candidate_nodes).result %>

      probe_nodes:
        action: tripleo.baremetal.probe_node
        on-success: send_message
        on-error: probe_nodes_failed
        input:
          ip: <% $.node.ip %>
          port: <% $.node.port %>
          username: <% $.node.username %>
          password: <% $.node.password %>
        with-items:
          - node in <% $.candidates %>
        publish:
          nodes_json: <% task(probe_nodes).result.where($ != null) %>

      probe_nodes_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(probe_nodes).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.discover_nodes
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
                nodes_json: <% $.get('nodes_json', []) %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>

  discover_and_enroll_nodes:
    description: Run nodes discovery over the given IP range and enroll nodes

    input:
      - ip_addresses
      - credentials
      - ports: [623]
      - kernel_name: null
      - ramdisk_name: null
      - instance_boot_option: local
      - initial_state: manageable
      - queue_name: tripleo

    tags:
      - tripleo-common-managed

    tasks:

      discover_nodes:
        workflow: tripleo.baremetal.v1.discover_nodes
        input:
          ip_addresses: <% $.ip_addresses %>
          ports: <% $.ports %>
          credentials: <% $.credentials %>
          queue_name: <% $.queue_name %>
        on-success: enroll_nodes
        on-error: discover_nodes_failed
        publish:
          nodes_json: <% task(discover_nodes).result.nodes_json %>

      discover_nodes_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(discover_nodes).result %>

      enroll_nodes:
        workflow: tripleo.baremetal.v1.register_or_update
        input:
          nodes_json: <% $.nodes_json %>
          kernel_name: <% $.kernel_name %>
          ramdisk_name: <% $.ramdisk_name %>
          instance_boot_option: <% $.instance_boot_option %>
          initial_state: <% $.initial_state %>
        on-success: send_message
        on-error: enroll_nodes_failed
        publish:
          registered_nodes: <% task(enroll_nodes).result.registered_nodes %>

      enroll_nodes_failed:
        on-success: send_message
        publish:
          status: FAILED
          message: <% task(enroll_nodes).result %>

      send_message:
        action: zaqar.queue_post
        retry: count=5 delay=1
        input:
          queue_name: <% $.queue_name %>
          messages:
            body:
              type: tripleo.baremetal.v1.discover_and_enroll_nodes
              payload:
                status: <% $.get('status', 'SUCCESS') %>
                message: <% $.get('message', '') %>
                execution: <% execution() %>
                registered_nodes: <% $.get('registered_nodes', []) %>
        on-success:
          - fail: <% $.get('status') = "FAILED" %>