Undercloud Installation ======================= This section contains instructions on how to install the undercloud. For update or upgrade to a deployed undercloud see undercloud_upgrade_. .. _undercloud_upgrade: ../post_deployment/upgrade/undercloud.html .. _install_undercloud: Installing the Undercloud -------------------------- .. note:: Instack-undercloud was deprecated in Rocky cycle. Containerized undercloud should be installed instead. See :doc:`undercloud` for backward compatibility related information. .. note:: Please ensure all your nodes (undercloud, compute, controllers, etc) have their internal clock set to UTC in order to prevent any issue with possible file future-dated timestamp if hwclock is synced before any timezone offset is applied. #. Log in to your machine (baremetal or VM) where you want to install the undercloud as a non-root user (such as the stack user):: ssh @ .. note:: If you don't have a non-root user created yet, log in as root and create one with following commands:: sudo useradd stack sudo passwd stack # specify a password echo "stack ALL=(root) NOPASSWD:ALL" | sudo tee -a /etc/sudoers.d/stack sudo chmod 0440 /etc/sudoers.d/stack su - stack .. note:: The undercloud is intended to work correctly with SELinux enforcing. Installations with the permissive/disabled SELinux are not recommended. The ``undercloud_enable_selinux`` config option controls that setting. .. note:: vlan tagged interfaces must follow the if_name.vlan_id convention, like for example: eth0.vlan100 or bond0.vlan120. .. admonition:: Baremetal :class: baremetal Ensure that there is a FQDN hostname set and that the $HOSTNAME environment variable matches that value. The easiest way to do this is to set the ``undercloud_hostname`` option in undercloud.conf before running the install. This will allow the installer to configure all of the hostname- related settings appropriately. Alternatively the hostname settings can be configured manually, but this is strongly discouraged. The manual steps are as follows:: sudo hostnamectl set-hostname myhost.mydomain sudo hostnamectl set-hostname --transient myhost.mydomain An entry for the system's FQDN hostname is also needed in /etc/hosts. For example, if the system is named *myhost.mydomain*, /etc/hosts should have an entry like:: 127.0.0.1 myhost.mydomain myhost #. Enable needed repositories: .. admonition:: RHEL :class: rhel Enable optional repo for RHEL7:: sudo yum install -y yum-utils sudo yum-config-manager --enable rhelosp-rhel-7-server-opt .. include:: ../repositories.rst #. Install the TripleO CLI, which will pull in all other necessary packages as dependencies:: sudo dnf install -y python*-tripleoclient .. admonition:: RHEL7 / CentOS For RHEL or CentOS 7 the command would be:: sudo yum install -y python-tripleoclient .. admonition:: Ceph :class: ceph If you intend to deploy Ceph in the overcloud, or configure the overcloud to use an external Ceph cluster, and are running Pike or newer, then install ceph-ansible on the undercloud:: sudo dnf install -y ceph-ansible .. admonition:: TLS :class: tls If you intend to deploy *TLS-everywhere* in the overcloud and are deploying Train with python3 or Ussuri+, install the following packages:: sudo yum install -y python3-ipalib python3-ipaclient krb5-devel If you're deploying Train with python2, install the corresponding python2 version of the above packages:: sudo yum install -y python-ipalib python-ipaclient krb5-devel if you intend to use Novajoin to implement *TLS-everywhere* install the following package:: sudo yum install -y python-novajoin You can find more information about deploying with TLS in the :doc:`../features/tls-introduction` documentation. #. Prepare the configuration file:: cp /usr/share/python-tripleoclient/undercloud.conf.sample ~/undercloud.conf It is backwards compatible with non-containerized instack underclouds. .. admonition:: Stable Branch :class: stable For a non-containerized undercloud, copy in the sample configuration file and edit it to reflect your environment:: cp /usr/share/instack-undercloud/undercloud.conf.sample ~/undercloud.conf .. note:: There is a tool available that can help with writing a basic ``undercloud.conf``: `Undercloud Configuration Wizard `_ It takes some basic information about the intended overcloud environment and generates sane values for a number of the important options. #. (OPTIONAL) Generate configuration for preparing container images As part of the undercloud install, an image registry is configured on port `8787`. This is used to increase reliability of overcloud image pulls, and minimise overall network transfers. The undercloud registry will be populated with images required by the undercloud by generating the following `containers-prepare-parameter.yaml` file and including it in ``undercloud.conf: container_images_file=$HOME/containers-prepare-parameter.yaml``:: openstack tripleo container image prepare default \ --local-push-destination \ --output-env-file ~/containers-prepare-parameter.yaml .. note:: This command is available since Rocky. See :ref:`prepare-environment-containers` for details on using `containers-prepare-parameter.yaml` to control what can be done during the container images prepare phase of an undercloud install. Additionally, ``docker_insecure_registries`` and ``docker_registry_mirror`` parameters allow to customize container registries via the ``undercloud.conf`` file. #. (OPTIONAL) Override heat parameters and environment files used for undercloud deployment. Similarly to overcloud deployments, see :ref:`override-heat-templates` and :ref:`custom-template-location`, the ``undercloud.conf: custom_env_files`` and ``undercloud.conf: templates`` configuration parameters allow to use a custom heat templates location and override or specify additional information for Heat resources used for undercloud deployment. Additionally, the ``undercloud.conf: roles_file`` parameter brings in the ultimate flexibility of :ref:`custom_roles` and :ref:`composable_services`. This allows you to deploy an undercloud composed of highly customized containerized services, with the same workflow that TripleO uses for overcloud deployments. .. note:: The CLI and configuration interface used to deploy a containerized undercloud is the same as that used by 'legacy' non-containerized underclouds. As noted above however mechanism by which the undercloud is actually deployed is completely changed and what is more, for the first time aligns with the overcloud deployment. See the command ``openstack tripleo deploy --standalone`` help for details. It normally should not be used directly for undercloud installations. #. Run the command to install the undercloud: .. admonition:: SSL :class: optional To deploy an undercloud with SSL, see :doc:`../features/ssl`. .. admonition:: Validations :class: validations :doc:`../post_deployment/validations/index` will be installed and configured during undercloud installation. You can set ``enable_validations = false`` in ``undercloud.conf`` to prevent that. To deploy an undercloud:: openstack undercloud install .. note:: The undercloud is containerized by default as of Rocky. .. note:: It's possible to enable verbose logging with ``--verbose`` option. .. note:: To install a deprecated instack undercloud, you'll need to deploy with ``--use-heat=False`` option. Since Rocky, we will run all the OpenStack services in a moby container runtime unless the default settings are overwritten. This command requires 2 services to be running at all times. The first one is a basic keystone service, which is currently executed by `tripleoclient` itself, the second one is `heat-all` which executes the templates and installs the services. The latter can be run on baremetal or in a container (tripleoclient will run it in a container by default). Once the install has completed, you should take note of the files ``stackrc`` and ``undercloud-passwords.conf``. You can source ``stackrc`` to interact with the undercloud via the OpenStack command-line client. The ``undercloud-passwords.conf`` file contains the passwords used for each service in the undercloud. These passwords will be automatically reused if the undercloud is reinstalled on the same system, so it is not necessary to copy them to ``undercloud.conf``. .. note:: Heat installer configuration, logs and state is ephemeral for undercloud deployments. Generated artifacts for consequent deployments get overwritten or removed (when ``undercloud.conf: cleanup = true``). Although, you can still find them stored in compressed files. Miscellaneous undercloud deployment artifacts, like processed heat templates and compressed files, can be found in ``undercloud.conf: output_dir`` locations like ``~/tripleo-heat-installer-templates``. There is also a compressed file created and placed into the output dir, named as ``undercloud-install-.tar.bzip2``, where TS represents a timestamp. Downloaded ansible playbooks and inventory files (see :ref:`config_download`) used for undercloud deployment are stored in the tempdir ``~/undercloud-ansible-`` by default. .. note:: In order to obtain the ansible command used for the installation of the Undercloud in the artifacts directory, it is necessary to pass the option ``--reproduce-command`` in the Undercloud deployment command. .. note:: Any passwords set in ``undercloud.conf`` will take precedence over the ones in ``undercloud-passwords.conf``. .. note:: The undercloud installation command can be rerun to reapply changes from ``undercloud.conf`` to the undercloud. Note that this should be done with caution if an overcloud has already been deployed or is in progress as some configuration changes could affect the overcloud. These changes include but are not limited to: #. Package repository changes on the undercloud, followed by running the installation command could update the undercloud such that further management operations are not possible on the overcloud until the overcloud update or upgrade procedure is followed. #. Reconfiguration of the undercloud container registry if the overcloud is using the undercloud as the source for container images. #. Networking configuration changes on the undercloud which may affect the overcloud's ability to connect to the undercloud for instance metadata services. .. note:: If running ``docker`` commands as a stack user after an undercloud install fail with a permission error, log out and log in again. The stack user does get added to the docker group during install, but that change gets reflected only after a new login. Cleaning the Undercloud ----------------------- This procedure isn't cleaning everything that TripleO generates, but enough so an Undercloud could be re-deployed. .. note:: This procedure has been tested on Train and onward. There is no guarantee that it works before this version, due to container commands and new directories. #. Log in to your machine (baremetal or VM) where you want to cleanup the undercloud as a non-root user (such as the stack user):: ssh @ #. Cleanup the containers and their images:: sudo podman rm -af sudo podman rmi -af #. Remove directories generated by TripleO:: sudo rm -rf \ /var/lib/tripleo-config \ /var/lib/config-data \ /var/lib/container-config-scripts \ /var/lib/container-puppet \ /var/lib/heat-config \ /var/lib/image-service \ /var/lib/mysql #. Cleanup systemd:: sudo rm -rf /etc/systemd/system/tripleo* sudo systemctl daemon-reload