38 KiB

Raw Blame History

Configuring Ceph with Custom Config Settings

This guide assumes that the undercloud is already installed and ready to deploy an overcloud and that the appropriate repositories containing Ceph packages, including ceph-ansible if applicable, have been enabled and installed as described in ../deployment/index.

Deploying an Overcloud with Ceph

TripleO can deploy and configure Ceph as if it was a composable OpenStack service and configure OpenStack services like Nova, Glance, Cinder, Cinder Backup, and Gnocchi to use it as a storage backend.

TripleO can only deploy one Ceph cluster in the overcloud per Heat stack. However, within that Heat stack it's possible to configure an overcloud to communicate with multiple Ceph clusters which are external to the overcloud. To do this, follow this document to configure the "internal" Ceph cluster which is part of the overcloud and also use the CephExternalMultiConfig parameter described in the ceph_external documentation.

Prior to Pike, TripleO deployed Ceph with puppet-ceph. With the Pike release it is possible to use TripleO to deploy Ceph with either ceph-ansible or puppet-ceph, though puppet-ceph is deprecated. To deploy Ceph in containers use ceph-ansible, for which only a containerized Ceph deployment is possible. It is not possible to deploy a containerized Ceph with puppet-ceph.

To deploy with Ceph include either of the appropriate environment files. For puppet-ceph use "environments/puppet-ceph.yaml" like the following:

openstack overcloud deploy --templates -e /usr/share/openstack-tripleo-heat-templates/environments/puppet-ceph.yaml

For ceph-ansible use "environments/ceph-ansible/ceph-ansible.yaml" like the following:

openstack overcloud deploy --templates -e /usr/share/openstack-tripleo-heat-templates/environments/ceph-ansible/ceph-ansible.yaml

When using ceph-ansible to deploy Ceph in containers, the process described in the prepare-environment-containers documentation will configure the deployment to use the appropriate Ceph docker image. However, it is also possible to override the default docker image. For example:

parameter_defaults:
  DockerCephDaemonImage: ceph/daemon:tag-stable-3.0-jewel-centos-7

In both the puppet-ceph and ceph-ansible examples above, at least one Ceph storage node is required. The following example will configure one Ceph storage nodes on servers matching the ceph-storage profile. It will also set the default pool size, the number of times that an object should be written for data protection, to one. These parameter_defaults may be saved in an environment file "~/my-ceph-settings.yaml" and added to the deploy commandline:

parameter_defaults:
  OvercloudCephStorageFlavor: ceph-storage
  CephStorageCount: 1
  CephDefaultPoolSize: 1

The values above are only appropriate for a development or POC deployment. The default pool size is three but if there are less than three Ceph OSDs, then the cluster will never reach status HEALTH_OK because it has no place to make additional copies. Thus, a POC deployment with less than three OSDs should override the default default pool size. However, a production deployment should replace both of the ones above with threes, or greater, in order to have at least three storage nodes and at least three back up copies of each object at minimum.

Configuring nova-compute ephemeral backend per role

NovaEnableRdbBackend can be configured on a per-role basis allowing compute hosts to be deployed with a subset using RBD ephemeral disk. The remaining hosts continue using the default local ephemeral disk.

Note

For best performacne images to be deployed to RBD ephemeral computes should be in RAW format while images to be deployed to local ephemeral computes should be QCOW2 format.

Generate roles_data including the provided ComputeLocalEphemeral and ComputeRBDEphemeral roles as described in the custom_roles documentation.

Configure the role counts, for example "nodes.yaml":

parameter_defaults:
  ComputeLocalEphemeralCount: 10
  ComputeRBDEphemeralCount: 10

Alternatively the "NovaEnableRbdBackend" parameter can be set as a role parameter on any Compute role, for example:

parameter_defaults:
  ComputeParameters:
    NovaEnableRbdBackend: true
  MyCustomComputeParameters:
    NovaEnableRbdBackend: false

Deploy using the per-role ceph-ansible environment file "environments/ceph-ansible/ceph-ansible-per-role.yaml":

openstack overcloud deploy --templates -r my_roles_data.yaml -e nodes.yaml -e /usr/share/openstack-tripleo-heat-templates/environments/ceph-ansible/ceph-ansible-per-role.yaml

Customizing ceph.conf with puppet-ceph

Ceph demands for more careful configuration when deployed at scale.

It is possible to override any of the configuration parameters supported by puppet-ceph at deployment time via Heat environment files. For example:

parameter_defaults:
  ExtraConfig:
    ceph::profile::params::osd_journal_size: 2048

will customize the default osd_journal_size overriding any default provided in the ceph.yaml static hieradata.

It is also possible to provide arbitrary stanza/key/value lines for ceph.conf using the special ceph::conf configuration class. For example by using:

parameter_defaults:
  ExtraConfig:
    ceph::conf::args:
      global/max_open_files:
        value: 131072
      global/my_setting:
        value: my_value

the resulting ceph.conf file should be populated with the following:

[global]
max_open_files: 131072
my_setting: my_value

To specify a set of dedicated block devices to use as Ceph OSDs use the following:

parameter_defaults:
  ExtraConfig:
    ceph::profile::params::osds:
      '/dev/sdb':
        journal: '/dev/sde'
      '/dev/sdc':
        journal: '/dev/sde'
      '/dev/sdd':
        journal: '/dev/sde'

The above will produce three OSDs which run on /dev/sdb, /dev/sdc, and /dev/sdd which all journal to /dev/sde. This same setup will be duplicated per Ceph storage node and assumes uniform hardware. If you do not have uniform hardware see node_specific_hieradata.

The parameter_defaults like the above may be saved in an environment file "~/my-ceph-settings.yaml" and added to the deploy commandline:

openstack overcloud deploy --templates -e /usr/share/openstack-tripleo-heat-templates/environments/puppet-ceph.yaml -e ~/my-ceph-settings.yaml

Customizing ceph.conf with ceph-ansible

The playbooks provided by ceph-ansible are triggered by a Mistral workflow. A new CephAnsibleExtraConfig parameter has been added to the templates and can be used to provide arbitrary config variables consumed by ceph-ansible. The pre-existing template params consumed by the TripleO Pike release to drive puppet-ceph continue to work and are translated, when possible, into their equivalent ceph-ansible variable.

For example, to encrypt the data stored on OSDs use the following:

parameter_defaults:
  CephAnsibleExtraConfig:
    dmcrypt: true

The above example may be used to change any of the defaults found in ceph-ansible/group_vars.

If a parameter to override is not an available group variable, then ceph.conf sections settings may be set directly using CephConfigOverrides like the following:

parameter_defaults:
  CephConfigOverrides:
    global:
      max_open_files: 131072
    osd:
      osd_journal_size: 40960

To change the backfill and recovery operations that Ceph uses to rebalance a cluster, use an example like the following:

parameter_defaults:
  CephConfigOverrides:
    global:
      osd_recovery_op_priority: 3
      osd_recovery_max_active: 3
      osd_max_backfills: 1

Configuring CephX Keys

TripleO will create a Ceph cluster with a CephX key file for OpenStack RBD client connections that is shared by the Nova, Cinder, Glance and Gnocchi services to read and write to their pools. Not only will the keyfile be created but the Ceph cluster will be configured to accept connections when the key file is used. The file will be named /etc/ceph/ceph.client.openstack.keyring and it will be created using the following defaults:

CephClusterName: 'ceph'
CephClientUserName: 'openstack'
CephClientKey: This value is randomly genereated per Heat stack. If it is overridden the recomendation is to set it to the output of ceph-authtool --gen-print-key.

If the above values are overridden, the keyring file will have a different name and different content. E.g. if CephClusterName was set to 'foo' and CephClientUserName was set to 'bar', then the keyring file would be called foo.client.bar.keyring and it would contain the line [client.bar].

The CephExtraKeys parameter may be used to generate additional key files containing other key values and should contain a list of maps where each map describes an each additional key. The syntax of each map must conform to what the ceph-ansible/library/ceph_key.py Ansible module accepts. The CephExtraKeys parameter should be used like this:

CephExtraKeys:
  - name: "client.glance"
    caps:
      mgr: "allow *"
      mon: "profile rbd"
      osd: "profile rbd pool=images"
    key: "AQBRgQ9eAAAAABAAv84zEilJYZPNuJ0Iwn9Ndg=="
    mode: "0600"

If the above is used, in addition to the ceph.client.openstack.keyring file, an additional file called ceph.client.glance.keyring will be created which contains:

[client.glance]
      key = AQBRgQ9eAAAAABAAv84zEilJYZPNuJ0Iwn9Ndg==
      caps mgr = "allow *"
      caps mon = "profile rbd"
      caps osd = "profile rbd pool=images"

The Ceph cluster will also allow the above key file to be used to connect to the images pool. Ceph RBD clients which are external to the overcloud could then use this CephX key to connect to the images pool used by Glance. The default Glance deployment defined in the Heat stack will continue to use the ceph.client.openstack.keyring file unless that Glance configuration itself is overridden.

Tuning Ceph OSD CPU and Memory

The group variable ceph_osd_docker_cpu_limit, which corresponds to docker run ... --cpu-quota, may be overridden depending on the hardware configuration and the system needs. Below is an example of setting custom values for this parameter:

parameter_defaults:
  CephAnsibleExtraConfig:
    ceph_osd_docker_cpu_limit: 1

Warning

Overriding the ceph_osd_docker_memory_limit variable is not recommended. Use of ceph-ansible 3.2 or newer is recommended as it will automatically tune this variable based on hardware.

ceph-ansible 3.2 and newer

As of ceph-ansible 3.2, the ceph_osd_docker_memory_limit is set by default to the max memory of the host in order to ensure Ceph does not run out of resources. While it is technically possible to override the bluestore osd_memory_target by setting it inside of the CephConfigOverrides directive, it is better to let ceph-ansible automatically tune this variable. Such tuning is also influenced by the boolean is_hci flag. When collocating Ceph OSD services on the same nodes which run Nova compute services (also known as "hyperconverged deployments"), set this variable as in the example below:

parameter_defaults:
  CephAnsibleExtraConfig:
    is_hci: true

When using filestore in hyperconverged deployments, include the "environments/tuned-ceph-filestore-hci.yaml" enviornment file to set a tuned profile <tuned> designed for Ceph filestore. Do not use this tuned profile with bluestore.

ceph-ansible 4.0 and newer

Stein's default Ceph is Nautilus, which introduced the Messenger v2 protocol. ceph-ansible 4.0 and newer added a parameter in order to:

enable or disable the v1 protocol
define the port used to bind the process

Ceph Nautilus enables both v1 and v2 protocols by default and v1 is maintained for backward compatibility. To disable v1 protocol, set the variables as in the example below:

parameter_defaults:
  CephAnsibleExtraConfig:
    mon_host_v1:
      enabled: False

Configure OSD settings with ceph-ansible

To specify which block devices will be used as Ceph OSDs, use a variation of the following:

parameter_defaults:
  CephAnsibleDisksConfig:
    devices:
      - /dev/sdb
      - /dev/sdc
      - /dev/sdd
      - /dev/nvme0n1
    osd_scenario: lvm
    osd_objectstore: bluestore

Because /dev/nvme0n1 is in a higher performing device class, e.g. it is an SSD and the other devices are spinning HDDs, the above will produce three OSDs which run on /dev/sdb, /dev/sdc, and /dev/sdd and they will use /dev/nvme0n1 as a bluestore WAL device. The ceph-volume tool does this by using the "batch" subcommand. This same setup will be duplicated per Ceph storage node and assumes uniform hardware. If you do not have uniform hardware see node_specific_hieradata. If the bluestore WAL data will reside on the same disks as the OSDs, then the above could be changed to the following:

parameter_defaults:
  CephAnsibleDisksConfig:
    devices:
      - /dev/sdb
      - /dev/sdc
      - /dev/sdd
    osd_scenario: lvm
    osd_objectstore: bluestore

The example above configures the devices list using the disk name, e.g. /dev/sdb, based on the sd driver. This method of referring to block devices is not guaranteed to be consistent on reboots so a disk normally identified by /dev/sdc may be named /dev/sdb later. Another way to refer to block devices is by-path which is persistent accross reboots. The by-path names for your disks are in the Ironic introspection data. A utility exists to generate a Heat environment file from Ironic introspection data with a devices list for each of the Ceph nodes in a deployment automatically as described in node_specific_hieradata.

Warning

osd_scenario: lvm is used above to default new deployments to bluestore as configured, by ceph-volume, and is only available with ceph-ansible 3.2, or newer, and with Luminous, or newer. The parameters to support filestore with ceph-ansible 3.2 are backwards-compatible so existing filestore deployments should not simply have their osd_objectstore or osd_scenario parameters changed without taking steps to maintain both backends.

Filestore or ceph-ansible 3.1 (or older)

Ceph Luminous supports both filestore and bluestore, but bluestore deployments require ceph-ansible 3.2, or newer, and ceph-volume. For older versions, if the osd_scenario is either collocated or non-collocated, then ceph-ansible will use the ceph-disk tool, in place of ceph-volume, to configure Ceph's filestore backend in place of bluestore. A variation of the above example which uses filestore and ceph-disk is the following:

parameter_defaults:
  CephAnsibleDisksConfig:
    devices:
      - /dev/sdb
      - /dev/sdc
      - /dev/sdd
    dedicated_devices:
      - /dev/nvme0n1
      - /dev/nvme0n1
      - /dev/nvme0n1
    osd_scenario: non-collocated
    osd_objectstore: filestore

The above will produce three OSDs which run on /dev/sdb, /dev/sdc, and /dev/sdd, and which all journal to three partitions which will be created on /dev/nvme0n1. If the journals will reside on the same disks as the OSDs, then the above should be changed to the following:

parameter_defaults:
  CephAnsibleDisksConfig:
    devices:
      - /dev/sdb
      - /dev/sdc
      - /dev/sdd
    osd_scenario: collocated
    osd_objectstore: filestore

It is unsupported to use osd_scenario: collocated or osd_scenario: non-collocated with osd_objectstore: bluestore.

Maintaining both Bluestore and Filestore Ceph Backends

For existing Ceph deployments, it is possible to scale new Ceph storage nodes which use bluestore while keeping the existing Ceph storage nodes using filestore.

In order to support both filestore and bluestore in a deployment, the nodes which use filestore must continue to use the filestore parameters like the following:

parameter_defaults:
  CephAnsibleDisksConfig:
    devices:
      - /dev/sdb
      - /dev/sdc
    dedicated_devices:
      - /dev/nvme0n1
      - /dev/nvme0n1
    osd_scenario: non-collocated
    osd_objectstore: filestore

While the nodes which will use bluestore, all of the new nodes, must use bluestore parameters like the following:

parameter_defaults:
  CephAnsibleDisksConfig:
    devices:
      - /dev/sdb
      - /dev/sdc
      - /dev/nvme0n1
    osd_scenario: lvm
    osd_objectstore: bluestore

To resolve this difference, use node_specific_hieradata to map the filestore node's machine unique UUID to the filestore parameters, so that only those nodes are passed the filestore parmaters, and then set the default Ceph parameters, e.g. those found in ~/my-ceph-settings.yaml, to the bluestore parameters.

An example of what the ~/my-node-settings.yaml file, as described in node_specific_hieradata, might look like for two nodes which will keep using filestore is the following:

parameter_defaults:
  NodeDataLookup:
    00000000-0000-0000-0000-0CC47A6EFDCC:
      devices:
        - /dev/sdb
        - /dev/sdc
      dedicated_devices:
        - /dev/nvme0n1
        - /dev/nvme0n1
      osd_scenario: non-collocated
      osd_objectstore: filestore
    00000000-0000-0000-0000-0CC47A6F13FF:
      devices:
        - /dev/sdb
        - /dev/sdc
      dedicated_devices:
        - /dev/nvme0n1
        - /dev/nvme0n1
      osd_scenario: non-collocated
      osd_objectstore: filestore

Be sure to set every existing Ceph filestore server to the filestore parameters by its machine unique UUID. If the above is not done and the default parameter is set to osd_scenario=lvm for the existing nodes which were configured with ceph-disk, then these OSDs will not start after a restart of the systemd unit or a system reboot.

The example above, makes bluestore the new default and filestore an exception per node. An alternative approach is to keep the default of filestore and ceph-disk and use node_specific_hieradata for adding new nodes which use bluestore and ceph-volume. A benefit of this is that there wouldn't be any configuration change for existing nodes. However, every scale operation with Ceph nodes would require the use of node_specific_hieradata. While the example above, of making filestore and ceph-disk the per-node exception, requires more work up front, it simplifies future scale up when completed. If the cluster will be migrated to all bluestore, through node scale down and scale up, then the amount of items in ~/my-node-settings.yaml could be reduced for each scale down and scale up operation until the full cluster uses bluestore.

Customize Ceph Placement Groups per OpenStack Pool

The number of OSDs in a Ceph deployment should proportionally affect the number of Ceph PGs per Pool as determined by Ceph's pgcalc. When the appropriate default pool size and PG number are determined, the defaults should be overridden using an example like the following:

parameter_defaults:
  CephPoolDefaultSize: 3
  CephPoolDefaultPgNum: 128

In addition to setting the default PG number for each pool created, each Ceph pool created for OpenStack can have its own PG number. TripleO supports customization of these values by using a syntax like the following:

parameter_defaults:
  CephPools:
    - {"name": backups, "pg_num": 512, "pgp_num": 512, "application": rbd}
    - {"name": volumes, "pg_num": 1024, "pgp_num": 1024, "application": rbd, "rule_name": 'replicated_rule', "erasure_profile": '', "expected_num_objects": 6000}
    - {"name": vms, "pg_num": 512, "pgp_num": 512, "application": rbd}
    - {"name": images, "pg_num": 128, "pgp_num": 128, "application": rbd}

In the above example, PG numbers for each pool differ based on the OpenStack use case from pgcalc. The example above also passes additional options as described in the ceph osd pool create documentation to the volumes pool used by Cinder. A TripleO validation (described in Validating Ceph Configuration) may be used to verify that the PG numbers satisfy Ceph's PG overdose protection check before the deployment starts.

Customizing crushmap using device classes

Since Luminous, Ceph introduces a new device classes feature with the purpose of automating one of the most common reasons crushmaps are directly edited. Device classes are a new property for OSDs visible by running ceph osd tree and observing the class column, which should default correctly to each device's hardware capability (hdd, ssd or nvme). This feature is useful because Ceph CRUSH rules can restrict placement to a specific device class. For example, they make it easy to create a "fast" pool that distributes data only over SSDs. To do this, one simply needs to specify in the pool definition which device class should be used. This is simpler than directly editing the CRUSH map itself. There is no need for the operator to specify the device class for each disk added into the cluster: with this new functionality, ceph is able to autodetect the disk type (exposed by Linux kernel), placing it in the right category. For this reason the old way of specifying which block devices will be used as Ceph OSDs is still valid:

CephAnsibleDisksConfig:
    devices:
      - /dev/sdb
      - /dev/sdc
      - /dev/sdd
    osd_scenario: lvm
    osd_objectstore: bluestore

However, if the operator would like to force a specific device to belong to a specific class, the crush_device_class property is provided and the device list defined above can be changed into:

CephAnsibleDisksConfig:
     lvm_volumes:
        - data: '/dev/sdb'
          crush_device_class: 'hdd'
        - data: '/dev/sdc'
          crush_device_class: 'sdd'
        - data: '/dev/sdd'
          crush_device_class: 'hdd'
    osd_scenario: lvm
    osd_objectstore: bluestore

Note

crush_device_class property is optional and can be omitted. Ceph is able to autodect the type of disk, so this option can be used for advanced users or to fake/force the disk type.

After the device list is defined, the next step is to set some additional parameters to properly generate the ceph-ansible variables; in TripleO there are no explicitly exposed parameters to integrate this feature, however, the ceph-ansible expected parameters can be generated through `CephAnsibleExtraConfig`:

CephAnsibleExtraConfig:
    crush_rule_config: true
    create_crush_tree: true
    crush_rules:
      - name: HDD
        root: default
        type: host
        class: hdd
        default: true
      - name: SSD
        root: default
        type: host
        class: ssd
        default: false

As seen in the example above, in order to properly generate the crushmap hierarchy used by device classes, the crush_rule_config and create_crush_tree booleans should be enabled. These booleans will trigger the ceph-ansible playbook related to the crushmap customization, and the rules associated to the device classes will be generated according to the crush_rules array. This allows the ceph cluster to build a shadow hierarchy which reflects the specified rules. Finally, as described in the customize placement group section, TripleO supports the customization of pools; in order to tie a specific pool to a device class, the rule_name option should be added as follows:

CephPools:
  - name: fastpool
    pg_num: 8
    rule_name: SSD
    application: rbd

By adding this rule, we can make sure fastpool will follow the SSD rule which is defined for the ssd device class and it can be configured and used as a second (fast) tier to manage cinder volumes.

Customizing crushmap using node specific overrides

With device classes the ceph cluster can expose different storage tiers with no need to manually edit the crushmap. However, if device classes are not sufficient, the creation of a specific crush hierarchy (e.g., host, rack, row, etc.), adding or removing extra layers (e.g., racks) on the crushmap is still valid and can be done via node_specific_hieradata. NodeDataLookup playbook is able to generate node spec overrides using the following syntax:

NodeDataLookup: {"SYSTEM_UUID": {"osd_crush_location": {"root": "$MY_ROOT", "rack": "$MY_RACK", "host": "$OVERCLOUD_NODE_HOSTNAME"}}}

Generate NodeDataLookup manually can be error-prone. For this reason TripleO provides the make_ceph_disk utility to build a JSON file to get started, then it can be modified adding the osd_crush_location properties dictionary with the syntax described above.

Override Ansible run options

TripleO runs the ceph-ansible site-docker.yml.sample playbook by default. The values in this playbook should be overridden as described in this document and the playbooks themselves should not be modified. However, it is possible to specify which playbook is run using the following parameter:

parameter_defaults:
  CephAnsiblePlaybook: /usr/share/ceph-ansible/site-docker.yml.sample

For each TripleO Ceph deployment, the above playbook's output is logged to /var/log/mistral/ceph-install-workflow.log. The default verbosity of the playbook run is 0. The example below sets the verbosity to 3:

parameter_defaults:
  CephAnsiblePlaybookVerbosity: 3

During the playbook run temporary files, like the Ansible inventory and the ceph-ansible parameters that are passed as overrides as described in this document, are stored on the undercloud in a directory that matches the pattern /tmp/ansible-mistral-action*. This directory is deleted at the end of each Mistral workflow which triggers the playbook run. However, the temporary files are not deleted when the verbosity is greater than 0. This option is helpful when debugging.

The Ansible environment variables may be overridden using an example like the following:

parameter_defaults:
  CephAnsibleEnvironmentVariables:
    ANSIBLE_SSH_RETRIES: '6'
    DEFAULT_FORKS: '25'

In the above example, the number of SSH retries is increased from the default to prevent timeouts. Ansible's fork number is automatically limited to the number of possible hosts at runtime. TripleO uses ceph-ansible to configure Ceph clients in addition to Ceph servers so when deploying a large number of compute nodes ceph-ansible may consume a lot of memory on the undercloud. Lowering the fork count will reduce the memory footprint while the Ansible playbook is running at the expense of the number of hosts configured in parallel.

Applying ceph-ansible customizations to a overcloud deployment

The desired options from the ceph-ansible examples above to customize the ceph.conf, container, OSD or Ansible options may be combined under one parameter_defaults setting and saved in an environment file "~/my-ceph-settings.yaml" and added to the deploy commandline:

openstack overcloud deploy --templates -e /usr/share/openstack-tripleo-heat-templates/environments/ceph-ansible/ceph-ansible.yaml -e ~/my-ceph-settings.yaml

Already Deployed Servers and ceph-ansible

When using ceph-ansible and deployed_server, it is necessary to run commands like the following from the undercloud before deployment:

export OVERCLOUD_HOSTS="192.168.1.8 192.168.1.42"
bash /usr/share/openstack-tripleo-heat-templates/deployed-server/scripts/enable-ssh-admin.sh

In the example above, the OVERCLOUD_HOSTS variable should be set to the IPs of the overcloud hosts which will be Ceph servers or which will host Ceph clients (e.g. Nova, Cinder, Glance, Gnocchi, Manila, etc.). The enable-ssh-admin.sh script configures a user on the overcloud nodes that Ansible uses to configure Ceph.

Note

Both puppet-ceph and ceph-ansible do not reformat the OSD disks and expect them to be clean to complete successfully. Consequently, when reusing the same nodes (or disks) for new deployments, it is necessary to clean the disks before every new attempt. One option is to enable the automated cleanup functionality in Ironic, which will zap the disks every time that a node is released. The same process can be executed manually or only for some target nodes, see cleaning instructions in the Ironic doc.

Note

The extra_config doc has a more details on the usage of the different ExtraConfig interfaces.

Note

Deployment with ceph-ansible requires that OSDs run on dedicated block devices.

Adding Ceph Dashboard to a Overcloud deployment

Starting from Ceph Nautilus the ceph dashboard component is available and fully automated by TripleO. To deploy the ceph dashboard include the ceph-dashboard.yaml environment file as in the following example:

openstack overcloud deploy --templates -e /usr/share/openstack-tripleo-heat-templates/environments/ceph-ansible/ceph-ansible.yaml -e /usr/share/openstack-tripleo-heat-templates/environments/ceph-ansible/ceph-dashboard.yaml

The command above will include the ceph dashboard related services and generates all the ceph-ansible required variables to trigger the playbook execution for both deployment and configuration of this component. When the deployment has been completed the Ceph dashboard containers, including prometheus and grafana, will be running on the controller nodes and will be accessible using the port 3100 for grafana and 9092 for prometheus; since this service is only internal and doesn’t listen on the public vip, users can reach both grafana and the exposed ceph dashboard using the controller provisioning network vip on the specified port (8444 is the default for a generic overcloud deployment). The resulting deployment will be composed by an external stack made by grafana, prometheus, alertmanager, node-exporter containers and the ceph dashboard mgr module that acts as the backend for this external stack, embedding the grafana layouts and showing the ceph cluster specific metrics coming from prometheus. The Ceph Dashboard frontend is fully integrated with the tls-everywhere framework, hence providing the tls environments files will trigger the certificate request for both grafana and the ceph dashboard: the generated crt and key files are then passed to ceph-ansible. The Ceph Dashboard admin user role is set to read-only mode by default for safe monitoring of the Ceph cluster. To permit an admin user to have elevated privileges to alter elements of the Ceph cluster with the Dashboard, the operator can change the default. For this purpose, TripleO exposes a parameter that can be used to change the Ceph Dashboard admin default mode. Log in to the undercloud as stack user and create the ceph_dashboard_admin.yaml environment file with the following content:

parameter_defaults:
   CephDashboardAdminRO: false

Run the overcloud deploy command to update the existing stack and include the environment file created with all other environment files that are already part of the existing deployment:

openstack overcloud deploy  --templates -e <existing_overcloud_environment_files> -e ceph_dashboard_admin.yml

The ceph dashboard will also work with composable networks. In order to isolate the monitoring access for security purposes, operators can take advantage of composable networks and access the dashboard through a separate network vip. By doing this, it's not necessary to access the provisioning network and separate authorization profiles may be implemented. To deploy the overcloud with the ceph dashboard composable network we need first to generate the controller specific role created for this scenario:

openstack overcloud roles generate -o /home/stack/roles_data.yaml ControllerStorageDashboard Compute BlockStorage ObjectStorage CephStorage

Finally, run the overcloud deploy command including the new generated roles_data.yaml and the network_data_dashboard.yaml file that will trigger the generation of this new network. The final overcloud command must look like the following:

openstack overcloud deploy --templates -r /home/stack/roles_data.yaml -n /usr/share/openstack-tripleo-heat-templates/network_data_dashboard.yaml -e /usr/share/openstack-tripleo-heat-templates/environments/ceph-ansible/ceph-ansible.yaml -e ~/my-ceph-settings.yaml

Validating Ceph Configuration

The tripleo-validations framework contains validations for Ceph which may be run before deployment to save time debugging possible failures.

Create an inventory on the undercloud which refers to itself:

echo "undercloud ansible_connection=local" > inventory

Set Ansible environment variables:

BASE="/usr/share/openstack-tripleo-validations"
export ANSIBLE_RETRY_FILES_ENABLED=false
export ANSIBLE_KEEP_REMOTE_FILES=1
export ANSIBLE_CALLBACK_PLUGINS="${BASE}/callback_plugins"
export ANSIBLE_ROLES_PATH="${BASE}/roles"
export ANSIBLE_LOOKUP_PLUGINS="${BASE}/lookup_plugins"
export ANSIBLE_LIBRARY="${BASE}/library"

See what Ceph validations are available:

ls $BASE/playbooks | grep ceph

Run a Ceph validation with command like the following:

ansible-playbook -i inventory $BASE/playbooks/ceph-ansible-installed.yaml

For Stein and newer it is possible to run validations using the openstack tripleo validator run command with a syntax like the following:

openstack tripleo validator run --validation ceph-ansible-installed

The ceph-ansible-installed validation warns if the ceph-ansible RPM is not installed on the undercloud. This validation is also run automatically during deployment unless validations are disabled.

Ceph Placement Group Validation

Ceph will refuse to take certain actions if they are harmful to the cluster. E.g. if the placement group numbers are not correct for the amount of available OSDs, then Ceph will refuse to create pools which are required for OpenStack. Rather than wait for the deployment to reach the point where Ceph is going to be configured only to find out that the deployment failed because the parameters were not correct, you may run a validation before deployment starts to quickly determine if Ceph will create your OpenStack pools based on the overrides which will be passed to the overcloud.

Note

Unless there are at least 8 OSDs, the TripleO defaults will cause the deployment to fail unless you modify the CephPools, CephPoolDefaultSize, or CephPoolDefaultPgNum parameters. This validation will help you find the appropriate values.

To run the ceph-pg validation, configure your environment as described in the previous section but also run the following command to switch Ansible's hash_behaviour from replace (the default) to merge. This is done to make Ansible behave the same way that TripleO Heat Templates behaves when multiple environment files are passed with the -e @file.yaml syntax:

export ANSIBLE_HASH_BEHAVIOUR=merge

Then use a command like the following:

ansible-playbook -i inventory $BASE/playbooks/ceph-pg.yaml -e @ceph.yaml -e num_osds=36

The num_osds parameter is required. This value should be the number of expected OSDs that will be in the Ceph deployment. It should be equal to the number of devices and lvm_volumes under CephAnsibleDisksConfig multiplied by the number of nodes running the CephOSD service (e.g. nodes in the CephStorage role, nodes in the ComputeHCI role, and any custom roles, etc.). This value should also be adjusted to compensate for the number of OSDs used by nodes with node-specific overrides as covered earlier in this document.

In the above example, ceph.yaml should be the same file passed to the overcloud deployment, e.g. opesntack overcloud deploy ... -e ceph.yaml, as covered earlier in this document. As many files as required may be passed using -e @file.yaml in order to get the following parameters passed to the ceph-pg validation.

CephPoolDefaultSize
CephPoolDefaultPgNum
CephPools

If the above parameters are not passed, then the TripleO defaults will be used for the parameters above.

The above example is based only on Ceph pools created for RBD. If Ceph RGW and/or Manila via NFS Ganesha is also being deployed, then simply pass the same environment files for enabling these services you would as if you were running openstack overcloud deploy. For example:

export THT=/usr/share/openstack-tripleo-heat-templates/
ansible-playbook -i inventory $BASE/playbooks/ceph-pg.yaml \
  -e @$THT/environments/ceph-ansible/ceph-rgw.yaml \
  -e @$THT/environments/ceph-ansible/ceph-mds.yaml \
  -e @$THT/environments/manila-cephfsganesha-config.yaml \
  -e @ceph.yaml -e num_osds=36

In the above example, the validation will simulate the creation of the pools required for the RBD, RGW and MDS services and the validation will fail if the placement group numbers are not correct.

38 KiB Raw Blame History Unescape Escape

Configuring Ceph with Custom Config Settings

Deploying an Overcloud with Ceph

Configuring nova-compute ephemeral backend per role

Customizing ceph.conf with puppet-ceph

Customizing ceph.conf with ceph-ansible

Configuring CephX Keys

Tuning Ceph OSD CPU and Memory

Configure OSD settings with ceph-ansible

Maintaining both Bluestore and Filestore Ceph Backends

Customize Ceph Placement Groups per OpenStack Pool

Customizing crushmap using device classes

Customizing crushmap using node specific overrides

Override Ansible run options

Applying ceph-ansible customizations to a overcloud deployment

Already Deployed Servers and ceph-ansible

Adding Ceph Dashboard to a Overcloud deployment

Validating Ceph Configuration

Ceph Placement Group Validation

38 KiB

Raw Blame History