tripleo-heat-templates/puppet/ceph-storage.yaml

388 lines
14 KiB
YAML
Raw Normal View History

heat_template_version: 2016-10-14
description: 'OpenStack ceph storage node configured by Puppet'
parameters:
OvercloudCephStorageFlavor:
description: Flavor for the Ceph Storage node.
default: baremetal
type: string
constraints:
- custom_constraint: nova.flavor
CephStorageImage:
type: string
default: overcloud-full
constraints:
- custom_constraint: glance.image
ImageUpdatePolicy:
default: 'REBUILD_PRESERVE_EPHEMERAL'
description: What policy to use when reconstructing instances. REBUILD for rebuilds, REBUILD_PRESERVE_EPHEMERAL to preserve /mnt.
type: string
KeyName:
description: Name of an existing Nova key pair to enable SSH access to the instances
type: string
default: default
constraints:
- custom_constraint: nova.keypair
ServiceNetMap:
default: {}
description: Mapping of service_name -> network name. Typically set
via parameter_defaults in the resource registry.
type: json
UpdateIdentifier:
default: ''
type: string
description: >
Setting to a previously unused value during stack-update will trigger
package update on all nodes
Hostname:
type: string
default: '' # Defaults to Heat created hostname
HostnameMap:
type: json
default: {}
description: Optional mapping to override hostnames
ExtraConfig:
default: {}
description: |
Additional hiera configuration to inject into the cluster. Note
that CephStorageExtraConfig takes precedence over ExtraConfig.
type: json
CephStorageExtraConfig:
default: {}
description: |
Role specific additional hiera configuration to inject into the cluster.
type: json
CephStorageIPs:
default: {}
type: json
NetworkDeploymentActions:
type: comma_delimited_list
description: >
Heat action when to apply network configuration changes
default: ['CREATE']
SoftwareConfigTransport:
default: POLL_SERVER_CFN
description: |
How the server should receive the metadata required for software configuration.
type: string
constraints:
- allowed_values: [POLL_SERVER_CFN, POLL_SERVER_HEAT, POLL_TEMP_URL, ZAQAR_MESSAGE]
CloudDomain:
type: string
description: >
The DNS domain used for the hosts. This should match the dhcp_domain
configured in the Undercloud neutron. Defaults to localdomain.
ServerMetadata:
default: {}
description: >
Extra properties or metadata passed to Nova for the created nodes in
the overcloud. It's accessible via the Nova metadata API.
type: json
CephStorageSchedulerHints:
type: json
description: Optional scheduler hints to pass to nova
default: {}
NodeIndex:
type: number
default: 0
ServiceConfigSettings:
type: json
default: {}
ServiceNames:
type: comma_delimited_list
default: []
MonitoringSubscriptions:
type: comma_delimited_list
default: []
ConfigCommand:
type: string
description: Command which will be run whenever configuration data changes
default: os-refresh-config --timeout 14400
resources:
CephStorage:
type: OS::TripleO::Server
metadata:
os-collect-config:
command: {get_param: ConfigCommand}
properties:
image: {get_param: CephStorageImage}
image_update_policy: {get_param: ImageUpdatePolicy}
flavor: {get_param: OvercloudCephStorageFlavor}
key_name: {get_param: KeyName}
networks:
- network: ctlplane
user_data_format: SOFTWARE_CONFIG
user_data: {get_resource: UserData}
name:
str_replace:
template: {get_param: Hostname}
params: {get_param: HostnameMap}
software_config_transport: {get_param: SoftwareConfigTransport}
metadata: {get_param: ServerMetadata}
scheduler_hints: {get_param: CephStorageSchedulerHints}
# Combine the NodeAdminUserData and NodeUserData mime archives
UserData:
type: OS::Heat::MultipartMime
properties:
parts:
- config: {get_resource: NodeAdminUserData}
type: multipart
- config: {get_resource: NodeUserData}
type: multipart
# Creates the "heat-admin" user if configured via the environment
# Should return a OS::Heat::MultipartMime reference via OS::stack_id
NodeAdminUserData:
type: OS::TripleO::NodeAdminUserData
# For optional operator additional userdata
# Should return a OS::Heat::MultipartMime reference via OS::stack_id
NodeUserData:
type: OS::TripleO::NodeUserData
ExternalPort:
type: OS::TripleO::CephStorage::Ports::ExternalPort
properties:
ControlPlaneIP: {get_attr: [CephStorage, networks, ctlplane, 0]}
IPPool: {get_param: CephStorageIPs}
NodeIndex: {get_param: NodeIndex}
InternalApiPort:
type: OS::TripleO::CephStorage::Ports::InternalApiPort
properties:
ControlPlaneIP: {get_attr: [CephStorage, networks, ctlplane, 0]}
IPPool: {get_param: CephStorageIPs}
NodeIndex: {get_param: NodeIndex}
StoragePort:
type: OS::TripleO::CephStorage::Ports::StoragePort
properties:
ControlPlaneIP: {get_attr: [CephStorage, networks, ctlplane, 0]}
IPPool: {get_param: CephStorageIPs}
NodeIndex: {get_param: NodeIndex}
StorageMgmtPort:
type: OS::TripleO::CephStorage::Ports::StorageMgmtPort
properties:
ControlPlaneIP: {get_attr: [CephStorage, networks, ctlplane, 0]}
IPPool: {get_param: CephStorageIPs}
NodeIndex: {get_param: NodeIndex}
TenantPort:
type: OS::TripleO::CephStorage::Ports::TenantPort
properties:
ControlPlaneIP: {get_attr: [CephStorage, networks, ctlplane, 0]}
IPPool: {get_param: CephStorageIPs}
NodeIndex: {get_param: NodeIndex}
ManagementPort:
type: OS::TripleO::CephStorage::Ports::ManagementPort
properties:
ControlPlaneIP: {get_attr: [CephStorage, networks, ctlplane, 0]}
IPPool: {get_param: CephStorageIPs}
NodeIndex: {get_param: NodeIndex}
NetworkConfig:
type: OS::TripleO::CephStorage::Net::SoftwareConfig
properties:
ControlPlaneIp: {get_attr: [CephStorage, networks, ctlplane, 0]}
ExternalIpSubnet: {get_attr: [ExternalPort, ip_subnet]}
InternalApiIpSubnet: {get_attr: [InternalApiPort, ip_subnet]}
StorageIpSubnet: {get_attr: [StoragePort, ip_subnet]}
StorageMgmtIpSubnet: {get_attr: [StorageMgmtPort, ip_subnet]}
TenantIpSubnet: {get_attr: [TenantPort, ip_subnet]}
ManagementIpSubnet: {get_attr: [ManagementPort, ip_subnet]}
NetIpMap:
type: OS::TripleO::Network::Ports::NetIpMap
properties:
ControlPlaneIp: {get_attr: [CephStorage, networks, ctlplane, 0]}
ExternalIp: {get_attr: [ExternalPort, ip_address]}
ExternalIpSubnet: {get_attr: [ExternalPort, ip_subnet]}
Add IPv6 Support to Isolated Networks This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2015-10-15 15:10:44 +00:00
ExternalIpUri: {get_attr: [ExternalPort, ip_address_uri]}
InternalApiIp: {get_attr: [InternalApiPort, ip_address]}
InternalApiIpSubnet: {get_attr: [InternalApiPort, ip_subnet]}
Add IPv6 Support to Isolated Networks This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2015-10-15 15:10:44 +00:00
InternalApiIpUri: {get_attr: [InternalApiPort, ip_address_uri]}
StorageIp: {get_attr: [StoragePort, ip_address]}
StorageIpSubnet: {get_attr: [StoragePort, ip_subnet]}
Add IPv6 Support to Isolated Networks This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2015-10-15 15:10:44 +00:00
StorageIpUri: {get_attr: [StoragePort, ip_address_uri]}
StorageMgmtIp: {get_attr: [StorageMgmtPort, ip_address]}
StorageMgmtIpSubnet: {get_attr: [StorageMgmtPort, ip_subnet]}
Add IPv6 Support to Isolated Networks This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2015-10-15 15:10:44 +00:00
StorageMgmtIpUri: {get_attr: [StorageMgmtPort, ip_address_uri]}
TenantIp: {get_attr: [TenantPort, ip_address]}
TenantIpSubnet: {get_attr: [TenantPort, ip_subnet]}
Add IPv6 Support to Isolated Networks This change adds a new set of network templates with IPv6 subnets that can be used instead of the existing IPv4 networks. Each network can use either the IPv4 or IPv6 template, and the Neutron subnet will be created with the specified IP version. The default addresses used for the IPv6 networks use the fd00::/8 prefix for the internal isolated networks (this range is reserved for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64 is used as an example default for the External network (2001:db8::/32 are the documentation addresses [RFC3849]), but this would ordinarily be a globally addressable subnet. These parameters may be overridden in an environment file. This change will require updates to the OpenStack Puppet Modules to support IPv6 addresses in some of the hieradata values. Many of the OPM modules already have IPv6 support to support IPv6 deployments in Packstack, but some OPM packages that apply only to Instack/TripleO deployments need to be updated. IPv6 addresses used in URLs need to be surrounded by brackets in order to differentiate IP address from port number. This change adds a new output to the network/ports resources for ip_address_uri, which is an IP address with brackets in the case of IPv6, and a raw IP address without brackets for IPv4 ports. This change also updates some URLs which are constructed in Heat. This has been tested and problems were found with Puppet not accepting IPv6 addresses. This is addressed in the latest Puppet. Additional changes were required to make this work with Ceph. IPv6 tunnel endpoints with Open vSwitch are not yet supported (although support is coming soon), so this review leaves the Tenant network as an isolated IPv4 network for the time being. Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2015-10-15 15:10:44 +00:00
TenantIpUri: {get_attr: [TenantPort, ip_address_uri]}
ManagementIp: {get_attr: [ManagementPort, ip_address]}
ManagementIpSubnet: {get_attr: [ManagementPort, ip_subnet]}
ManagementIpUri: {get_attr: [ManagementPort, ip_address_uri]}
NetworkDeployment:
type: OS::TripleO::SoftwareDeployment
properties:
name: NetworkDeployment
config: {get_resource: NetworkConfig}
server: {get_resource: CephStorage}
actions: {get_param: NetworkDeploymentActions}
CephStorageDeployment:
type: OS::Heat::StructuredDeployment
depends_on: NetworkDeployment
properties:
name: CephStorageDeployment
config: {get_resource: CephStorageConfig}
server: {get_resource: CephStorage}
input_values:
enable_package_upgrade: {get_attr: [UpdateDeployment, update_managed_packages]}
CephStorageConfig:
type: OS::Heat::StructuredConfig
properties:
group: os-apply-config
config:
hiera:
hierarchy:
- '"%{::uuid}"'
- heat_config_%{::deploy_config_name}
- ceph_extraconfig
- extraconfig
- service_names
- service_configs
- bootstrap_node # provided by allNodesConfig
- all_nodes # provided by allNodesConfig
- vip_data # provided by allNodesConfig
- '"%{::osfamily}"'
merge_behavior: deeper
datafiles:
service_names:
mapped_data:
service_names: {get_param: ServiceNames}
sensu::subscriptions: {get_param: MonitoringSubscriptions}
service_configs:
mapped_data:
map_replace:
- {get_param: ServiceConfigSettings}
- values: {get_attr: [NetIpMap, net_ip_map]}
ceph_extraconfig:
mapped_data: {get_param: CephStorageExtraConfig}
extraconfig:
mapped_data: {get_param: ExtraConfig}
ceph:
mapped_data:
tripleo::packages::enable_upgrade: {get_input: enable_package_upgrade}
# Resource for site-specific injection of root certificate
NodeTLSCAData:
depends_on: CephStorageDeployment
type: OS::TripleO::NodeTLSCAData
properties:
server: {get_resource: CephStorage}
# Hook for site-specific additional pre-deployment config, e.g extra hieradata
CephStorageExtraConfigPre:
depends_on: CephStorageDeployment
type: OS::TripleO::CephStorageExtraConfigPre
properties:
server: {get_resource: CephStorage}
# Hook for site-specific additional pre-deployment config,
# applying to all nodes, e.g node registration/unregistration
NodeExtraConfig:
depends_on: [CephStorageExtraConfigPre, NodeTLSCAData]
type: OS::TripleO::NodeExtraConfig
properties:
server: {get_resource: CephStorage}
UpdateConfig:
type: OS::TripleO::Tasks::PackageUpdate
UpdateDeployment:
type: OS::Heat::SoftwareDeployment
properties:
config: {get_resource: UpdateConfig}
server: {get_resource: CephStorage}
input_values:
update_identifier:
get_param: UpdateIdentifier
outputs:
ip_address:
description: IP address of the server in the ctlplane network
value: {get_attr: [CephStorage, networks, ctlplane, 0]}
hostname:
description: Hostname of the server
value: {get_attr: [CephStorage, name]}
hosts_entry:
value:
str_replace:
template: |
PRIMARYIP PRIMARYHOST.DOMAIN PRIMARYHOST
EXTERNALIP EXTERNALHOST.DOMAIN EXTERNALHOST
INTERNAL_APIIP INTERNAL_APIHOST.DOMAIN INTERNAL_APIHOST
STORAGEIP STORAGEHOST.DOMAIN STORAGEHOST
STORAGE_MGMTIP STORAGE_MGMTHOST.DOMAIN STORAGE_MGMTHOST
TENANTIP TENANTHOST.DOMAIN TENANTHOST
MANAGEMENTIP MANAGEMENTHOST.DOMAIN MANAGEMENTHOST
params:
PRIMARYIP: {get_attr: [NetIpMap, net_ip_map, {get_param: [ServiceNetMap, CephStorageHostnameResolveNetwork]}]}
DOMAIN: {get_param: CloudDomain}
PRIMARYHOST: {get_attr: [CephStorage, name]}
EXTERNALIP: {get_attr: [ExternalPort, ip_address]}
EXTERNALHOST:
list_join:
- '.'
- - {get_attr: [CephStorage, name]}
- external
INTERNAL_APIIP: {get_attr: [InternalApiPort, ip_address]}
INTERNAL_APIHOST:
list_join:
- '.'
- - {get_attr: [CephStorage, name]}
- internalapi
STORAGEIP: {get_attr: [StoragePort, ip_address]}
STORAGEHOST:
list_join:
- '.'
- - {get_attr: [CephStorage, name]}
- storage
STORAGE_MGMTIP: {get_attr: [StorageMgmtPort, ip_address]}
STORAGE_MGMTHOST:
list_join:
- '.'
- - {get_attr: [CephStorage, name]}
- storagemgmt
TENANTIP: {get_attr: [TenantPort, ip_address]}
TENANTHOST:
list_join:
- '.'
- - {get_attr: [CephStorage, name]}
- tenant
MANAGEMENTIP: {get_attr: [ManagementPort, ip_address]}
MANAGEMENTHOST:
list_join:
- '.'
- - {get_attr: [CephStorage, name]}
- management
nova_server_resource:
description: Heat resource handle for the ceph storage server
value:
{get_resource: CephStorage}
external_ip_address:
description: IP address of the server in the external network
value: {get_attr: [ExternalPort, ip_address]}
internal_api_ip_address:
description: IP address of the server in the internal_api network
value: {get_attr: [InternalApiPort, ip_address]}
storage_ip_address:
description: IP address of the server in the storage network
value: {get_attr: [StoragePort, ip_address]}
storage_mgmt_ip_address:
description: IP address of the server in the storage_mgmt network
value: {get_attr: [StorageMgmtPort, ip_address]}
tenant_ip_address:
description: IP address of the server in the tenant network
value: {get_attr: [TenantPort, ip_address]}
management_ip_address:
description: IP address of the server in the management network
value: {get_attr: [ManagementPort, ip_address]}