diff --git a/environments/net-bond-with-vlans-v6.yaml b/environments/net-bond-with-vlans-v6.yaml new file mode 100644 index 0000000000..73dda3d932 --- /dev/null +++ b/environments/net-bond-with-vlans-v6.yaml @@ -0,0 +1,20 @@ +# This template configures each role to use a pair of bonded nics (nic2 and +# nic3) and configures an IP address on each relevant isolated network +# for each role, with IPv6 on the External network. This template assumes +# use of network-isolation-v6.yaml. +# +# FIXME: if/when we add functionality to heatclient to include heat +# environment files we should think about using it here to automatically +# include network-isolation-v6.yaml. +resource_registry: + OS::TripleO::BlockStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/cinder-storage.yaml + OS::TripleO::Compute::Net::SoftwareConfig: ../network/config/bond-with-vlans/compute.yaml + OS::TripleO::Controller::Net::SoftwareConfig: ../network/config/bond-with-vlans/controller-v6.yaml + OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/swift-storage.yaml + OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/ceph-storage.yaml + +parameter_defaults: + # This sets 'external_network_bridge' in l3_agent.ini to an empty string + # so that external networks act like provider bridge networks (they + # will plug into br-int instead of br-ex) + NeutronExternalNetworkBridge: "''" diff --git a/environments/net-bond-with-vlans.yaml b/environments/net-bond-with-vlans.yaml index 9600fc7e2e..de8f8f749b 100644 --- a/environments/net-bond-with-vlans.yaml +++ b/environments/net-bond-with-vlans.yaml @@ -12,10 +12,6 @@ resource_registry: OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/swift-storage.yaml OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/ceph-storage.yaml -# We use parameter_defaults instead of parameters here because Tuskar munges -# the names of top level and role level parameters with the role name and a -# version. Using parameter_defaults makes it such that if the parameter name is -# not defined in the template, we don't get an error. parameter_defaults: # This sets 'external_network_bridge' in l3_agent.ini to an empty string # so that external networks act like provider bridge networks (they diff --git a/environments/net-multiple-nics-v6.yaml b/environments/net-multiple-nics-v6.yaml new file mode 100644 index 0000000000..a2bb0bba42 --- /dev/null +++ b/environments/net-multiple-nics-v6.yaml @@ -0,0 +1,13 @@ +# This template configures each role to use a separate NIC for +# each isolated network with IPv6 on the External network. +# This template assumes use of network-isolation.yaml. +# +# FIXME: if/when we add functionality to heatclient to include heat +# environment files we should think about using it here to automatically +# include network-isolation-v6.yaml. +resource_registry: + OS::TripleO::BlockStorage::Net::SoftwareConfig: ../network/config/multiple-nics/cinder-storage.yaml + OS::TripleO::Compute::Net::SoftwareConfig: ../network/config/multiple-nics/compute.yaml + OS::TripleO::Controller::Net::SoftwareConfig: ../network/config/multiple-nics/controller-v6.yaml + OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/multiple-nics/swift-storage.yaml + OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/multiple-nics/ceph-storage.yaml diff --git a/environments/net-single-nic-linux-bridge-with-vlans.yaml b/environments/net-single-nic-linux-bridge-with-vlans.yaml index d5f2ed62f7..fd80bb9bc2 100644 --- a/environments/net-single-nic-linux-bridge-with-vlans.yaml +++ b/environments/net-single-nic-linux-bridge-with-vlans.yaml @@ -12,10 +12,6 @@ resource_registry: OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/single-nic-linux-bridge-vlans/swift-storage.yaml OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/single-nic-linux-bridge-vlans/ceph-storage.yaml -# We use parameter_defaults instead of parameters here because Tuskar munges -# the names of top level and role level parameters with the role name and a -# version. Using parameter_defaults makes it such that if the parameter name is -# not defined in the template, we don't get an error. parameter_defaults: # This sets 'external_network_bridge' in l3_agent.ini to an empty string # so that external networks act like provider bridge networks (they diff --git a/environments/net-single-nic-with-vlans-v6.yaml b/environments/net-single-nic-with-vlans-v6.yaml new file mode 100644 index 0000000000..8210bad3d1 --- /dev/null +++ b/environments/net-single-nic-with-vlans-v6.yaml @@ -0,0 +1,19 @@ +# This template configures each role to use Vlans on a single nic for +# each isolated network with IPv6 on the External network. +# This template assumes use of network-isolation.yaml. +# +# FIXME: if/when we add functionality to heatclient to include heat +# environment files we should think about using it here to automatically +# include network-isolation-v6.yaml. +resource_registry: + OS::TripleO::BlockStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/cinder-storage.yaml + OS::TripleO::Compute::Net::SoftwareConfig: ../network/config/single-nic-vlans/compute.yaml + OS::TripleO::Controller::Net::SoftwareConfig: ../network/config/single-nic-vlans/controller-v6.yaml + OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/swift-storage.yaml + OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/ceph-storage.yaml + +parameter_defaults: + # This sets 'external_network_bridge' in l3_agent.ini to an empty string + # so that external networks act like provider bridge networks (they + # will plug into br-int instead of br-ex) + NeutronExternalNetworkBridge: "''" diff --git a/environments/net-single-nic-with-vlans.yaml b/environments/net-single-nic-with-vlans.yaml index bdfeadd3f3..a61bc6e187 100644 --- a/environments/net-single-nic-with-vlans.yaml +++ b/environments/net-single-nic-with-vlans.yaml @@ -12,10 +12,6 @@ resource_registry: OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/swift-storage.yaml OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/ceph-storage.yaml -# We use parameter_defaults instead of parameters here because Tuskar munges -# the names of top level and role level parameters with the role name and a -# version. Using parameter_defaults makes it such that if the parameter name is -# not defined in the template, we don't get an error. parameter_defaults: # This sets 'external_network_bridge' in l3_agent.ini to an empty string # so that external networks act like provider bridge networks (they diff --git a/network/config/bond-with-vlans/controller-v6.yaml b/network/config/bond-with-vlans/controller-v6.yaml new file mode 100644 index 0000000000..7869ebfc81 --- /dev/null +++ b/network/config/bond-with-vlans/controller-v6.yaml @@ -0,0 +1,180 @@ +heat_template_version: 2015-04-30 + +description: > + Software Config to drive os-net-config with 2 bonded nics on a bridge + with VLANs attached for the controller role with IPv6 on the External + network. The IPv6 default route is on the External network, and the + IPv4 default route is on the Control Plane. + +parameters: + ControlPlaneIp: + default: '' + description: IP address/subnet on the ctlplane network + type: string + ExternalIpSubnet: + default: '' + description: IP address/subnet on the external network + type: string + InternalApiIpSubnet: + default: '' + description: IP address/subnet on the internal API network + type: string + StorageIpSubnet: + default: '' + description: IP address/subnet on the storage network + type: string + StorageMgmtIpSubnet: + default: '' + description: IP address/subnet on the storage mgmt network + type: string + TenantIpSubnet: + default: '' + description: IP address/subnet on the tenant network + type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + BondInterfaceOvsOptions: + default: 'bond_mode=active-backup' + description: The ovs_options string for the bond interface. Set things like + lacp=active and/or bond_mode=balance-slb using this option. + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number + InternalApiNetworkVlanID: + default: 20 + description: Vlan ID for the internal_api network traffic. + type: number + StorageNetworkVlanID: + default: 30 + description: Vlan ID for the storage network traffic. + type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string + ControlPlaneSubnetCidr: # Override this via parameter_defaults + default: '24' + description: The subnet CIDR of the control plane network. + type: string + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string + DnsServers: # Override this via parameter_defaults + default: [] + description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. + type: comma_delimited_list + EC2MetadataIp: # Override this via parameter_defaults + description: The IP address of the EC2 metadata server. + type: string + +resources: + OsNetConfigImpl: + type: OS::Heat::StructuredConfig + properties: + group: os-apply-config + config: + os_net_config: + network_config: + - + type: interface + name: nic1 + use_dhcp: false + addresses: + - + ip_netmask: + list_join: + - '/' + - - {get_param: ControlPlaneIp} + - {get_param: ControlPlaneSubnetCidr} + routes: + - + ip_netmask: 169.254.169.254/32 + next_hop: {get_param: EC2MetadataIp} + - + default: true + next_hop: {get_param: ControlPlaneDefaultRoute} + - + type: ovs_bridge + name: {get_input: bridge_name} + dns_servers: {get_param: DnsServers} + members: + - + type: ovs_bond + name: bond1 + ovs_options: {get_param: BondInterfaceOvsOptions} + members: + - + type: interface + name: nic2 + primary: true + - + type: interface + name: nic3 + - + type: vlan + device: bond1 + vlan_id: {get_param: ExternalNetworkVlanID} + addresses: + - + ip_netmask: {get_param: ExternalIpSubnet} + routes: + - + default: true + next_hop: {get_param: ExternalInterfaceDefaultRoute} + - + type: vlan + device: bond1 + vlan_id: {get_param: InternalApiNetworkVlanID} + addresses: + - + ip_netmask: {get_param: InternalApiIpSubnet} + - + type: vlan + device: bond1 + vlan_id: {get_param: StorageNetworkVlanID} + addresses: + - + ip_netmask: {get_param: StorageIpSubnet} + - + type: vlan + device: bond1 + vlan_id: {get_param: StorageMgmtNetworkVlanID} + addresses: + - + ip_netmask: {get_param: StorageMgmtIpSubnet} + - + type: vlan + device: bond1 + vlan_id: {get_param: TenantNetworkVlanID} + addresses: + - + ip_netmask: {get_param: TenantIpSubnet} + # Uncomment when including environments/network-management.yaml + #- + # type: vlan + # device: bond1 + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + +outputs: + OS::stack_id: + description: The OsNetConfigImpl resource. + value: {get_resource: OsNetConfigImpl} diff --git a/network/config/multiple-nics/controller-v6.yaml b/network/config/multiple-nics/controller-v6.yaml new file mode 100644 index 0000000000..b69879fbc7 --- /dev/null +++ b/network/config/multiple-nics/controller-v6.yaml @@ -0,0 +1,174 @@ +heat_template_version: 2015-04-30 + +description: > + Software Config to drive os-net-config to configure multiple interfaces + for the controller role with IPv6 on the External network. The IPv6 + default route is on the External network, and the IPv4 default route + is on the Control Plane. + +parameters: + ControlPlaneIp: + default: '' + description: IP address/subnet on the ctlplane network + type: string + ExternalIpSubnet: + default: '' + description: IP address/subnet on the external network + type: string + InternalApiIpSubnet: + default: '' + description: IP address/subnet on the internal API network + type: string + StorageIpSubnet: + default: '' + description: IP address/subnet on the storage network + type: string + StorageMgmtIpSubnet: + default: '' + description: IP address/subnet on the storage mgmt network + type: string + TenantIpSubnet: + default: '' + description: IP address/subnet on the tenant network + type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number + InternalApiNetworkVlanID: + default: 20 + description: Vlan ID for the internal_api network traffic. + type: number + StorageNetworkVlanID: + default: 30 + description: Vlan ID for the storage network traffic. + type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string + ControlPlaneSubnetCidr: # Override this via parameter_defaults + default: '24' + description: The subnet CIDR of the control plane network. + type: string + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string + DnsServers: # Override this via parameter_defaults + default: [] + description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. + type: comma_delimited_list + EC2MetadataIp: # Override this via parameter_defaults + description: The IP address of the EC2 metadata server. + type: string + +resources: + OsNetConfigImpl: + type: OS::Heat::StructuredConfig + properties: + group: os-apply-config + config: + os_net_config: + network_config: + - + type: interface + name: nic1 + use_dhcp: false + dns_servers: {get_param: DnsServers} + addresses: + - + ip_netmask: + list_join: + - '/' + - - {get_param: ControlPlaneIp} + - {get_param: ControlPlaneSubnetCidr} + routes: + - + ip_netmask: 169.254.169.254/32 + next_hop: {get_param: EC2MetadataIp} + - + default: true + next_hop: {get_param: ControlPlaneDefaultRoute} + - + type: interface + name: nic2 + use_dhcp: false + addresses: + - + ip_netmask: {get_param: StorageIpSubnet} + - + type: interface + name: nic3 + use_dhcp: false + addresses: + - + ip_netmask: {get_param: StorageMgmtIpSubnet} + - + type: interface + name: nic4 + use_dhcp: false + addresses: + - + ip_netmask: {get_param: InternalApiIpSubnet} + - + # Create a bridge which can also be used for VLAN-mode bridge mapping + type: ovs_bridge + name: br-tenant + use_dhcp: false + addresses: + - + ip_netmask: {get_param: TenantIpSubnet} + members: + - + type: interface + name: nic5 + use_dhcp: false + # force the MAC address of the bridge to this interface + primary: true + - + type: ovs_bridge + name: {get_input: bridge_name} + dns_servers: {get_param: DnsServers} + use_dhcp: false + addresses: + - + ip_netmask: {get_param: ExternalIpSubnet} + routes: + - + default: true + next_hop: {get_param: ExternalInterfaceDefaultRoute} + members: + - + type: interface + name: nic6 + # force the MAC address of the bridge to this interface + primary: true + # Uncomment when including environments/network-management.yaml + #- + # type: interface + # name: nic7 + # use_dhcp: false + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + +outputs: + OS::stack_id: + description: The OsNetConfigImpl resource. + value: {get_resource: OsNetConfigImpl} diff --git a/network/config/single-nic-vlans/controller-v6.yaml b/network/config/single-nic-vlans/controller-v6.yaml new file mode 100644 index 0000000000..472e539d4f --- /dev/null +++ b/network/config/single-nic-vlans/controller-v6.yaml @@ -0,0 +1,158 @@ +heat_template_version: 2015-04-30 + +description: > + Software Config to drive os-net-config to configure VLANs for the + controller role with IPv6 on the External network. The IPv6 default + route is on the External network, and the IPv4 default route is on + the Control Plane. + +parameters: + ControlPlaneIp: + default: '' + description: IP address/subnet on the ctlplane network + type: string + ExternalIpSubnet: + default: '' + description: IP address/subnet on the external network + type: string + InternalApiIpSubnet: + default: '' + description: IP address/subnet on the internal API network + type: string + StorageIpSubnet: + default: '' + description: IP address/subnet on the storage network + type: string + StorageMgmtIpSubnet: + default: '' + description: IP address/subnet on the storage mgmt network + type: string + TenantIpSubnet: + default: '' + description: IP address/subnet on the tenant network + type: string + ManagementIpSubnet: # Only populated when including environments/network-management.yaml + default: '' + description: IP address/subnet on the management network + type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number + InternalApiNetworkVlanID: + default: 20 + description: Vlan ID for the internal_api network traffic. + type: number + StorageNetworkVlanID: + default: 30 + description: Vlan ID for the storage network traffic. + type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number + TenantNetworkVlanID: + default: 50 + description: Vlan ID for the tenant network traffic. + type: number + ManagementNetworkVlanID: + default: 60 + description: Vlan ID for the management network traffic. + type: number + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string + ControlPlaneSubnetCidr: # Override this via parameter_defaults + default: '24' + description: The subnet CIDR of the control plane network. + type: string + ControlPlaneDefaultRoute: # Override this via parameter_defaults + description: The default route of the control plane network. + type: string + DnsServers: # Override this via parameter_defaults + default: [] + description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. + type: comma_delimited_list + EC2MetadataIp: # Override this via parameter_defaults + description: The IP address of the EC2 metadata server. + type: string + +resources: + OsNetConfigImpl: + type: OS::Heat::StructuredConfig + properties: + group: os-apply-config + config: + os_net_config: + network_config: + - + type: ovs_bridge + name: {get_input: bridge_name} + use_dhcp: false + dns_servers: {get_param: DnsServers} + addresses: + - + ip_netmask: + list_join: + - '/' + - - {get_param: ControlPlaneIp} + - {get_param: ControlPlaneSubnetCidr} + routes: + - + ip_netmask: 169.254.169.254/32 + next_hop: {get_param: EC2MetadataIp} + - + default: true + next_hop: {get_param: ControlPlaneDefaultRoute} + members: + - + type: interface + name: nic1 + # force the MAC address of the bridge to this interface + primary: true + - + type: vlan + vlan_id: {get_param: ExternalNetworkVlanID} + addresses: + - + ip_netmask: {get_param: ExternalIpSubnet} + routes: + - + default: true + next_hop: {get_param: ExternalInterfaceDefaultRoute} + - + type: vlan + vlan_id: {get_param: InternalApiNetworkVlanID} + addresses: + - + ip_netmask: {get_param: InternalApiIpSubnet} + - + type: vlan + vlan_id: {get_param: StorageNetworkVlanID} + addresses: + - + ip_netmask: {get_param: StorageIpSubnet} + - + type: vlan + vlan_id: {get_param: StorageMgmtNetworkVlanID} + addresses: + - + ip_netmask: {get_param: StorageMgmtIpSubnet} + - + type: vlan + vlan_id: {get_param: TenantNetworkVlanID} + addresses: + - + ip_netmask: {get_param: TenantIpSubnet} + #- # Uncomment when including environments/network-management.yaml + # type: vlan + # vlan_id: {get_param: ManagementNetworkVlanID} + # addresses: + # - + # ip_netmask: {get_param: ManagementIpSubnet} + +outputs: + OS::stack_id: + description: The OsNetConfigImpl resource. + value: {get_resource: OsNetConfigImpl} diff --git a/network/config/single-nic-vlans/controller.yaml b/network/config/single-nic-vlans/controller.yaml index 3b22b36b3a..a5a0745d4e 100644 --- a/network/config/single-nic-vlans/controller.yaml +++ b/network/config/single-nic-vlans/controller.yaml @@ -111,7 +111,7 @@ resources: ip_netmask: {get_param: ExternalIpSubnet} routes: - - ip_netmask: 0.0.0.0/0 + default: true next_hop: {get_param: ExternalInterfaceDefaultRoute} - type: vlan