Use already Deployed/Installed servers
This patch provides a set of templates that enables tripleo-heat-templates to be used with a set of already deployed, installed, and running servers. In this method, Nova and Ironic are not used to deploy any servers. This approach is attractive for POC deployments where dedicated provisioning networks are not available, or other server install methods are dictated for various reasons. There are also assumptions that currently have to be made about the software installed on the already deployed servers. Effectively, they must match the standard TripleO overcloud-full image. Co-Authored-By: Steve Hardy <shardy@redhat.com> Change-Id: I4ab1531f69c73457653f1cca3fe30cc32a04c129
This commit is contained in:
James Slagle
parent
7bc8a86a76
commit
c3d595c49a
|
|
@ -0,0 +1,129 @@
|
||||||
|
TripleO with Deployed Servers
|
||||||
|
=============================
|
||||||
|
|
||||||
|
The deployed-server set of templates can be used to deploy TripleO via
|
||||||
|
tripleo-heat-templates to servers that are already installed with a base
|
||||||
|
operating system.
|
||||||
|
|
||||||
|
When OS::TripleO::Server is mapped to the deployed-server.yaml template via the
|
||||||
|
provided deployed-server-environment.yaml resource registry, Nova and Ironic
|
||||||
|
are not used to create any server instances. Heat continues to create the
|
||||||
|
SoftwareDeployment resources, and they are made available to the already
|
||||||
|
deployed and running servers.
|
||||||
|
|
||||||
|
Template Usage
|
||||||
|
--------------
|
||||||
|
To use these templates pass the included environment file to the deployment
|
||||||
|
command::
|
||||||
|
|
||||||
|
-e deployed-server/deployed-server-environment.yaml
|
||||||
|
|
||||||
|
Deployed Server configuration
|
||||||
|
-----------------------------
|
||||||
|
It is currently assumed that the deployed servers being used have the required
|
||||||
|
set of software and packages already installed on them. These exact
|
||||||
|
requirements must match how such a server would look if it were deployed the
|
||||||
|
standard way via Ironic using the TripleO overcloud-full image.
|
||||||
|
|
||||||
|
An easy way to help get this setup for development is to use an overcloud-full
|
||||||
|
image from an already existing TripleO setup. Create the vm's for the already
|
||||||
|
deployed server, and use the overcloud-full image as their disk.
|
||||||
|
|
||||||
|
Each server must have a fqdn set that resolves to an IP address on a routable
|
||||||
|
network (e.g., the hostname should not resolve to 127.0.0.1). The hostname
|
||||||
|
will be detected on each server via the hostnamectl --static command.
|
||||||
|
|
||||||
|
Each server also must have a route to the configured IP address on the
|
||||||
|
undercloud where the OpenStack services are listening. This is the value for
|
||||||
|
local_ip in the undercloud.conf.
|
||||||
|
|
||||||
|
It's recommended that each server have at least 2 nic's. One used for external
|
||||||
|
management such as ssh, and one used for the OpenStack deployment itself. Since
|
||||||
|
the overcloud deployment will reconfigure networking on the configured nic to
|
||||||
|
be used by OpenStack, the external management nic is needed as a fallback so
|
||||||
|
that all connectivity is not lost in case of a configuration error. Be sure to
|
||||||
|
use correct nic config templates as needed, since the nodes will not receive
|
||||||
|
dhcp from the undercloud neutron-dhcp-agent service.
|
||||||
|
|
||||||
|
For example, the net-config-static-bridge.yaml template could be used for
|
||||||
|
controllers, and the net-config-static.yaml template could be used for computes
|
||||||
|
by specifying:
|
||||||
|
|
||||||
|
resource_registry:
|
||||||
|
OS::TripleO::Controller::Net::SoftwareConfig: /home/stack/deployed-server/tripleo-heat-templates/net-config-static-bridge.yaml
|
||||||
|
OS::TripleO::Compute::Net::SoftwareConfig: /home/stack/deployed-server/tripleo-heat-templates/net-config-static.yaml
|
||||||
|
|
||||||
|
In a setup where the first nic on the servers is used for external management,
|
||||||
|
set the nic's to be used for OpenStack to nic2:
|
||||||
|
|
||||||
|
parameter_defaults:
|
||||||
|
NeutronPublicInterface: nic2
|
||||||
|
HypervisorNeutronPublicInterface: nic2
|
||||||
|
|
||||||
|
The above nic config templates also require a route to the ctlplane network to
|
||||||
|
be defined. Define the needed parameters as necessary for your environment, for
|
||||||
|
example:
|
||||||
|
|
||||||
|
parameter_defaults:
|
||||||
|
ControlPlaneDefaultRoute: 192.168.122.130
|
||||||
|
ControlPlaneSubnetCidr: "24"
|
||||||
|
EC2MetadataIp: "192.0.2.1"
|
||||||
|
|
||||||
|
In this example, 192.168.122.130 is the external management IP of an
|
||||||
|
undercloud, thus it is the default route for the configured local_ip value of
|
||||||
|
192.0.2.1.
|
||||||
|
|
||||||
|
|
||||||
|
os-collect-config
|
||||||
|
-----------------
|
||||||
|
os-collect-config on each deployed server must be manually configured to poll
|
||||||
|
the Heat API for the available SoftwareDeployments. An example configuration
|
||||||
|
for /etc/os-collect-config.conf looks like:
|
||||||
|
|
||||||
|
[DEFAULT]
|
||||||
|
collectors=heat
|
||||||
|
command=os-refresh-config
|
||||||
|
|
||||||
|
[heat]
|
||||||
|
# you can get these values from stackrc on the undercloud
|
||||||
|
user_id=<a user that can connect to heat> # note this must be the ID, not the username
|
||||||
|
password=<a password>
|
||||||
|
auth_url=<keystone url>
|
||||||
|
project_id=<project_id> # note, this must be the ID, not project name
|
||||||
|
stack_id=<stack_id>
|
||||||
|
resource_name=<resource_name>
|
||||||
|
|
||||||
|
Note that the stack_id value is the id of the nested stack containing the
|
||||||
|
resource (identified by resource_name) implemented by the deployed-server.yaml
|
||||||
|
templates.
|
||||||
|
|
||||||
|
Once the configuration for os-collect-config has been defined, the service
|
||||||
|
needs to be restarted. Once restarted, it will start polling Heat and applying
|
||||||
|
the SoftwareDeployments.
|
||||||
|
|
||||||
|
A sample script at deployed-server/scripts/get-occ-config.sh is included that
|
||||||
|
will automatically generate the os-collect-config configuration needed on each
|
||||||
|
server, ssh to each server, copy the configuration, and restart the
|
||||||
|
os-collect-config service.
|
||||||
|
|
||||||
|
.. warning::
|
||||||
|
The get-occ-config.sh script is not intended for production use, as it
|
||||||
|
copies admin credentials to each of the deployed nodes.
|
||||||
|
|
||||||
|
The script can only be used once the stack id's of the nested deployed-server
|
||||||
|
stacks have been created via Heat. This usually only takes a couple of minutes
|
||||||
|
once the deployment command has been started. Once the following output is seen
|
||||||
|
from the deployment command, the script should be ready to run:
|
||||||
|
|
||||||
|
[Controller]: CREATE_IN_PROGRESS state changed
|
||||||
|
[NovaCompute]: CREATE_IN_PROGRESS state changed
|
||||||
|
|
||||||
|
The user running the script must be able to ssh as root to each server. Define
|
||||||
|
the hostnames of the deployed servers you intend to use for each role type::
|
||||||
|
|
||||||
|
export controller_hosts="controller0 controller1 controller2"
|
||||||
|
export compute_hosts="compute0"
|
||||||
|
|
||||||
|
Then run the script on the undercloud with a stackrc file sourced, and
|
||||||
|
the script will copy the needed os-collect-config.conf configuration to each
|
||||||
|
server and restart the os-collect-config service.
|
||||||
|
|
@ -0,0 +1,22 @@
|
||||||
|
heat_template_version: 2014-10-16
|
||||||
|
parameters:
|
||||||
|
user_data_format:
|
||||||
|
type: string
|
||||||
|
default: SOFTWARE_CONFIG
|
||||||
|
|
||||||
|
resources:
|
||||||
|
# We just need something which returns a unique ID, but we can't
|
||||||
|
# use RandomString because RefId returns the value, not the physical
|
||||||
|
# resource ID, SoftwareConfig should work as it returns a UUID
|
||||||
|
deployed-server-config:
|
||||||
|
type: OS::Heat::SoftwareConfig
|
||||||
|
|
||||||
|
outputs:
|
||||||
|
# FIXME(shardy) this is needed because TemplateResource returns an
|
||||||
|
# ARN not a UUID, which overflows the Deployment server_id column..
|
||||||
|
user_data_format:
|
||||||
|
value: SOFTWARE_CONFIG
|
||||||
|
OS::stack_id:
|
||||||
|
value: {get_resource: deployed-server-config}
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,122 @@
|
||||||
|
heat_template_version: 2014-10-16
|
||||||
|
parameters:
|
||||||
|
image:
|
||||||
|
type: string
|
||||||
|
default: unused
|
||||||
|
flavor:
|
||||||
|
type: string
|
||||||
|
default: unused
|
||||||
|
key_name:
|
||||||
|
type: string
|
||||||
|
default: unused
|
||||||
|
security_groups:
|
||||||
|
type: json
|
||||||
|
default: []
|
||||||
|
# Require this so we can validate the parent passes the
|
||||||
|
# correct value
|
||||||
|
user_data_format:
|
||||||
|
type: string
|
||||||
|
user_data:
|
||||||
|
type: string
|
||||||
|
default: ''
|
||||||
|
name:
|
||||||
|
type: string
|
||||||
|
default: ''
|
||||||
|
image_update_policy:
|
||||||
|
type: string
|
||||||
|
default: ''
|
||||||
|
networks:
|
||||||
|
type: comma_delimited_list
|
||||||
|
default: ''
|
||||||
|
metadata:
|
||||||
|
type: json
|
||||||
|
default: {}
|
||||||
|
software_config_transport:
|
||||||
|
default: POLL_SERVER_CFN
|
||||||
|
type: string
|
||||||
|
scheduler_hints:
|
||||||
|
type: json
|
||||||
|
description: Optional scheduler hints to pass to nova
|
||||||
|
default: {}
|
||||||
|
|
||||||
|
resources:
|
||||||
|
# We just need something which returns a unique ID, but we can't
|
||||||
|
# use RandomString because RefId returns the value, not the physical
|
||||||
|
# resource ID, SoftwareConfig should work as it returns a UUID
|
||||||
|
deployed-server:
|
||||||
|
type: OS::TripleO::DeployedServerConfig
|
||||||
|
properties:
|
||||||
|
user_data_format: SOFTWARE_CONFIG
|
||||||
|
|
||||||
|
InstanceIdConfig:
|
||||||
|
type: OS::Heat::StructuredConfig
|
||||||
|
properties:
|
||||||
|
group: os-apply-config
|
||||||
|
config:
|
||||||
|
instance-id: {get_attr: [deployed-server, "OS::stack_id"]}
|
||||||
|
|
||||||
|
InstanceIdDeployment:
|
||||||
|
type: OS::Heat::StructuredDeployment
|
||||||
|
properties:
|
||||||
|
config: {get_resource: InstanceIdConfig}
|
||||||
|
server: {get_resource: deployed-server}
|
||||||
|
|
||||||
|
HostsEntryConfig:
|
||||||
|
type: OS::Heat::SoftwareConfig
|
||||||
|
properties:
|
||||||
|
group: script
|
||||||
|
config: |
|
||||||
|
#!/bin/bash
|
||||||
|
set -eux
|
||||||
|
mkdir -p $heat_outputs_path
|
||||||
|
host=$(hostnamectl --static)
|
||||||
|
echo -n "$host " > $heat_outputs_path.hosts_entry
|
||||||
|
host_ip=$(python -c "import socket; print socket.gethostbyname(\"$host\")")
|
||||||
|
echo -n "$host_ip " >> $heat_outputs_path.hosts_entry
|
||||||
|
echo >> $heat_outputs_path.hosts_entry
|
||||||
|
cat $heat_outputs_path.hosts_entry
|
||||||
|
echo -n $host_ip > $heat_outputs_path.ip_address
|
||||||
|
cat $heat_outputs_path.ip_address
|
||||||
|
echo -n $host > $heat_outputs_path.hostname
|
||||||
|
cat $heat_outputs_path.hostname
|
||||||
|
outputs:
|
||||||
|
- name: hosts_entry
|
||||||
|
description: hosts_entry
|
||||||
|
- name: ip_address
|
||||||
|
description: ip_address
|
||||||
|
- name: hostname
|
||||||
|
description: hostname
|
||||||
|
|
||||||
|
HostsEntryDeployment:
|
||||||
|
type: OS::Heat::SoftwareDeployment
|
||||||
|
properties:
|
||||||
|
config: {get_resource: HostsEntryConfig}
|
||||||
|
server: {get_resource: deployed-server}
|
||||||
|
|
||||||
|
ControlPlanePort:
|
||||||
|
type: OS::Neutron::Port
|
||||||
|
properties:
|
||||||
|
network: ctlplane
|
||||||
|
name:
|
||||||
|
list_join:
|
||||||
|
- '-'
|
||||||
|
- - {get_attr: [HostsEntryDeployment, hostname]}
|
||||||
|
- ctlplane
|
||||||
|
- port
|
||||||
|
replacement_policy: AUTO
|
||||||
|
|
||||||
|
outputs:
|
||||||
|
# FIXME(shardy) this is needed because TemplateResource returns an
|
||||||
|
# ARN not a UUID, which overflows the Deployment server_id column..
|
||||||
|
OS::stack_id:
|
||||||
|
value: {get_attr: [deployed-server, "OS::stack_id"]}
|
||||||
|
networks:
|
||||||
|
value:
|
||||||
|
ctlplane:
|
||||||
|
- {get_attr: [ControlPlanePort, fixed_ips, 0, ip_address]}
|
||||||
|
name:
|
||||||
|
value: {get_attr: [HostsEntryDeployment, hostname]}
|
||||||
|
hosts_entry:
|
||||||
|
value: {get_attr: [HostsEntryDeployment, hosts_entry]}
|
||||||
|
ip_address:
|
||||||
|
value: {get_attr: [HostsEntryDeployment, ip_address]}
|
||||||
|
|
@ -0,0 +1,113 @@
|
||||||
|
#!/bin/bash
|
||||||
|
|
||||||
|
set -eux
|
||||||
|
|
||||||
|
SLEEP_TIME=5
|
||||||
|
|
||||||
|
CONTROLLER_HOSTS=${CONTROLLER_HOSTS:-""}
|
||||||
|
COMPUTE_HOSTS=${COMPUTE_HOSTS:-""}
|
||||||
|
BLOCKSTORAGE_HOSTS=${BLOCKSTORAGE_HOSTS:-""}
|
||||||
|
OBJECTSTORAGE_HOSTS=${OBJECTSTORAGE_HOSTS:-""}
|
||||||
|
CEPHSTORAGE_HOSTS=${CEPHSTORAGE_HOSTS:-""}
|
||||||
|
SUBNODES_SSH_KEY=${SUBNODES_SSH_KEY:-"~/.ssh/id_rsa"}
|
||||||
|
SSH_OPTIONS="-o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=Verbose -o PasswordAuthentication=no -o ConnectionAttempts=32"
|
||||||
|
|
||||||
|
read -a Controller_hosts_a <<< $CONTROLLER_HOSTS
|
||||||
|
read -a Compute_hosts_a <<< $COMPUTE_HOSTS
|
||||||
|
read -a BlockStorage_hosts_a <<< $BLOCKSTORAGE_HOSTS
|
||||||
|
read -a ObjectStorage_hosts_a <<< $OBJECTSTORAGE_HOSTS
|
||||||
|
read -a CephStorage_hosts_a <<< $CEPHSTORAGE_HOSTS
|
||||||
|
|
||||||
|
roles="Controller Compute BlockStorage ObjectStorage CephStorage"
|
||||||
|
admin_user_id=$(openstack user show admin -c id -f value)
|
||||||
|
admin_project_id=$(openstack project show admin -c id -f value)
|
||||||
|
|
||||||
|
function check_stack {
|
||||||
|
local stack_to_check=$1
|
||||||
|
|
||||||
|
if [ "$stack_to_check" = "|" ]; then
|
||||||
|
echo Stack not created
|
||||||
|
return 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo Checking if $1 stack is created
|
||||||
|
set +e
|
||||||
|
heat resource-list $stack_to_check
|
||||||
|
rc=$?
|
||||||
|
set -e
|
||||||
|
|
||||||
|
if [ ! "$rc" = "0" ]; then
|
||||||
|
echo Stack $1 not yet created
|
||||||
|
fi
|
||||||
|
|
||||||
|
return $rc
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
for role in $roles; do
|
||||||
|
while ! check_stack overcloud; do
|
||||||
|
sleep $SLEEP_TIME
|
||||||
|
done
|
||||||
|
|
||||||
|
rg_stack=$(heat resource-list overcloud | grep " $role " | awk '{print $4}')
|
||||||
|
while ! check_stack $rg_stack; do
|
||||||
|
sleep $SLEEP_TIME
|
||||||
|
rg_stack=$(heat resource-list overcloud | grep " $role " | awk '{print $4}')
|
||||||
|
done
|
||||||
|
|
||||||
|
stacks=$(heat resource-list $rg_stack | grep OS::TripleO::$role | awk '{print $4}')
|
||||||
|
|
||||||
|
i=0
|
||||||
|
|
||||||
|
for stack in $stacks; do
|
||||||
|
server_resource_name=$role
|
||||||
|
if [ "$server_resource_name" = "Compute" ]; then
|
||||||
|
server_resource_name="NovaCompute"
|
||||||
|
fi
|
||||||
|
|
||||||
|
server_stack=$(heat resource-list $stack | grep " $server_resource_name " | awk '{print $4}')
|
||||||
|
while ! check_stack $server_stack; do
|
||||||
|
sleep $SLEEP_TIME
|
||||||
|
server_stack=$(heat resource-list $stack | grep " $server_resource_name " | awk '{print $4}')
|
||||||
|
done
|
||||||
|
|
||||||
|
deployed_server_stack=$(heat resource-list $server_stack | grep "deployed-server" | awk '{print $4}')
|
||||||
|
|
||||||
|
echo "======================"
|
||||||
|
echo "$role$i os-collect-config.conf configuration:"
|
||||||
|
|
||||||
|
config="
|
||||||
|
[DEFAULT]
|
||||||
|
collectors=heat
|
||||||
|
command=os-refresh-config
|
||||||
|
polling_interval=30
|
||||||
|
|
||||||
|
[heat]
|
||||||
|
user_id=$admin_user_id
|
||||||
|
password=$OS_PASSWORD
|
||||||
|
auth_url=$OS_AUTH_URL
|
||||||
|
project_id=$admin_project_id
|
||||||
|
stack_id=$deployed_server_stack
|
||||||
|
resource_name=deployed-server-config"
|
||||||
|
|
||||||
|
echo "$config"
|
||||||
|
echo "======================"
|
||||||
|
echo
|
||||||
|
|
||||||
|
|
||||||
|
host=
|
||||||
|
eval host=\${${role}_hosts_a[i]}
|
||||||
|
if [ -n "$host" ]; then
|
||||||
|
# Delete the os-collect-config.conf template so our file won't get
|
||||||
|
# overwritten
|
||||||
|
ssh $SSH_OPTIONS -i $SUBNODES_SSH_KEY $host sudo /bin/rm -f /usr/libexec/os-apply-config/templates/etc/os-collect-config.conf
|
||||||
|
ssh $SSH_OPTIONS -i $SUBNODES_SSH_KEY $host "echo \"$config\" > os-collect-config.conf"
|
||||||
|
ssh $SSH_OPTIONS -i $SUBNODES_SSH_KEY $host sudo cp os-collect-config.conf /etc/os-collect-config.conf
|
||||||
|
ssh $SSH_OPTIONS -i $SUBNODES_SSH_KEY $host sudo systemctl restart os-collect-config
|
||||||
|
fi
|
||||||
|
|
||||||
|
let i+=1
|
||||||
|
|
||||||
|
done
|
||||||
|
|
||||||
|
done
|
||||||
|
|
@ -0,0 +1,3 @@
|
||||||
|
resource_registry:
|
||||||
|
OS::TripleO::Server: ../deployed-server/deployed-server.yaml
|
||||||
|
OS::TripleO::DeployedServerConfig: ../deployed-server/deployed-server-config.yaml
|
||||||
|
|
@ -0,0 +1,99 @@
|
||||||
|
heat_template_version: 2015-04-30
|
||||||
|
|
||||||
|
description: >
|
||||||
|
Software Config to drive os-net-config for a simple bridge configured
|
||||||
|
with a static IP address for the ctlplane network.
|
||||||
|
|
||||||
|
parameters:
|
||||||
|
ControlPlaneIp:
|
||||||
|
default: ''
|
||||||
|
description: IP address/subnet on the ctlplane network
|
||||||
|
type: string
|
||||||
|
ExternalIpSubnet:
|
||||||
|
default: ''
|
||||||
|
description: IP address/subnet on the external network
|
||||||
|
type: string
|
||||||
|
InternalApiIpSubnet:
|
||||||
|
default: ''
|
||||||
|
description: IP address/subnet on the internal API network
|
||||||
|
type: string
|
||||||
|
StorageIpSubnet:
|
||||||
|
default: ''
|
||||||
|
description: IP address/subnet on the storage network
|
||||||
|
type: string
|
||||||
|
StorageMgmtIpSubnet:
|
||||||
|
default: ''
|
||||||
|
description: IP address/subnet on the storage mgmt network
|
||||||
|
type: string
|
||||||
|
TenantIpSubnet:
|
||||||
|
default: ''
|
||||||
|
description: IP address/subnet on the tenant network
|
||||||
|
type: string
|
||||||
|
ManagementIpSubnet:
|
||||||
|
default: ''
|
||||||
|
description: IP address/subnet on the management network
|
||||||
|
type: string
|
||||||
|
ControlPlaneSubnetCidr: # Override this via parameter_defaults
|
||||||
|
default: '24'
|
||||||
|
description: The subnet CIDR of the control plane network.
|
||||||
|
type: string
|
||||||
|
ControlPlaneDefaultRoute: # Override this via parameter_defaults
|
||||||
|
description: The default route of the control plane network.
|
||||||
|
type: string
|
||||||
|
DnsServers: # Override this via parameter_defaults
|
||||||
|
default: []
|
||||||
|
description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf.
|
||||||
|
type: comma_delimited_list
|
||||||
|
EC2MetadataIp: # Override this via parameter_defaults
|
||||||
|
description: The IP address of the EC2 metadata server.
|
||||||
|
type: string
|
||||||
|
|
||||||
|
resources:
|
||||||
|
OsNetConfigImpl:
|
||||||
|
type: OS::Heat::StructuredConfig
|
||||||
|
properties:
|
||||||
|
group: os-apply-config
|
||||||
|
config:
|
||||||
|
os_net_config:
|
||||||
|
network_config:
|
||||||
|
-
|
||||||
|
type: ovs_bridge
|
||||||
|
name: {get_input: bridge_name}
|
||||||
|
use_dhcp: true
|
||||||
|
members:
|
||||||
|
-
|
||||||
|
type: interface
|
||||||
|
name: {get_input: interface_name}
|
||||||
|
# force the MAC address of the bridge to this interface
|
||||||
|
primary: true
|
||||||
|
-
|
||||||
|
type: interface
|
||||||
|
# would like to do the following, but can't b/c of:
|
||||||
|
# https://bugs.launchpad.net/heat/+bug/1344284
|
||||||
|
# name:
|
||||||
|
# list_join:
|
||||||
|
# - '/'
|
||||||
|
# - - {get_input: bridge_name}
|
||||||
|
# - ':0'
|
||||||
|
# So, just hardcode to br-ex:0 for now, br-ex is hardcoded in
|
||||||
|
# controller.yaml anyway.
|
||||||
|
name: br-ex:0
|
||||||
|
addresses:
|
||||||
|
-
|
||||||
|
ip_netmask:
|
||||||
|
list_join:
|
||||||
|
- '/'
|
||||||
|
- - {get_param: ControlPlaneIp}
|
||||||
|
- {get_param: ControlPlaneSubnetCidr}
|
||||||
|
routes:
|
||||||
|
-
|
||||||
|
ip_netmask: 169.254.169.254/32
|
||||||
|
next_hop: {get_param: EC2MetadataIp}
|
||||||
|
-
|
||||||
|
default: true
|
||||||
|
next_hop: {get_param: ControlPlaneDefaultRoute}
|
||||||
|
|
||||||
|
outputs:
|
||||||
|
OS::stack_id:
|
||||||
|
description: The OsNetConfigImpl resource.
|
||||||
|
value: {get_resource: OsNetConfigImpl}
|
||||||
|
|
@ -28,6 +28,9 @@ resource_registry:
|
||||||
OS::TripleO::Tasks::ControllerPrePuppet: OS::Heat::None
|
OS::TripleO::Tasks::ControllerPrePuppet: OS::Heat::None
|
||||||
OS::TripleO::Tasks::ControllerPostPuppet: OS::Heat::None
|
OS::TripleO::Tasks::ControllerPostPuppet: OS::Heat::None
|
||||||
|
|
||||||
|
|
||||||
|
OS::TripleO::Server: OS::Nova::Server
|
||||||
|
|
||||||
# This creates the "heat-admin" user for all OS images by default
|
# This creates the "heat-admin" user for all OS images by default
|
||||||
# To disable, replace with firstboot/userdata_default.yaml
|
# To disable, replace with firstboot/userdata_default.yaml
|
||||||
OS::TripleO::NodeAdminUserData: firstboot/userdata_heat_admin.yaml
|
OS::TripleO::NodeAdminUserData: firstboot/userdata_heat_admin.yaml
|
||||||
|
|
|
||||||
|
|
@ -98,7 +98,7 @@ parameters:
|
||||||
|
|
||||||
resources:
|
resources:
|
||||||
CephStorage:
|
CephStorage:
|
||||||
type: OS::Nova::Server
|
type: OS::TripleO::Server
|
||||||
metadata:
|
metadata:
|
||||||
os-collect-config:
|
os-collect-config:
|
||||||
command: {get_param: ConfigCommand}
|
command: {get_param: ConfigCommand}
|
||||||
|
|
|
||||||
|
|
@ -98,7 +98,7 @@ parameters:
|
||||||
|
|
||||||
resources:
|
resources:
|
||||||
BlockStorage:
|
BlockStorage:
|
||||||
type: OS::Nova::Server
|
type: OS::TripleO::Server
|
||||||
metadata:
|
metadata:
|
||||||
os-collect-config:
|
os-collect-config:
|
||||||
command: {get_param: ConfigCommand}
|
command: {get_param: ConfigCommand}
|
||||||
|
|
|
||||||
|
|
@ -324,7 +324,7 @@ parameters:
|
||||||
resources:
|
resources:
|
||||||
|
|
||||||
NovaCompute:
|
NovaCompute:
|
||||||
type: OS::Nova::Server
|
type: OS::TripleO::Server
|
||||||
metadata:
|
metadata:
|
||||||
os-collect-config:
|
os-collect-config:
|
||||||
command: {get_param: ConfigCommand}
|
command: {get_param: ConfigCommand}
|
||||||
|
|
|
||||||
|
|
@ -404,7 +404,7 @@ parameter_groups:
|
||||||
resources:
|
resources:
|
||||||
|
|
||||||
Controller:
|
Controller:
|
||||||
type: OS::Nova::Server
|
type: OS::TripleO::Server
|
||||||
metadata:
|
metadata:
|
||||||
os-collect-config:
|
os-collect-config:
|
||||||
command: {get_param: ConfigCommand}
|
command: {get_param: ConfigCommand}
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue