Remove ipv6 specific network templates

This change renders the IPv6 versions of the isolated
networks using j2. To allow for backward compatibility,
there will be 2 versions of the network definitions,
<network>.yaml and <network>_v6.yaml. If the ip_subnet
contains an IPv6 address, or if ipv6: true is set on the
network definition in network_data.yaml, then the
<network>.yaml version will contain an IPv6 definition,
otherwise the <network>.yaml will be IPv4, and the
<network>_v6.yaml will be IPv6.

In a future follow-up patch, we will probably only
create the required versions of the networks, either
IPv4, IPv6, not both.

The ipv6_subnet, ipv6_allocation_pools, and ipv6_gateway
settings in the network_data.yaml definition file are
used for the <network>_v6.yaml network definition.
Note that these subnet/cidr/gateway definitions only set
the defaults, which can be overridden with parameters
set in an environment file.

Since the parameters for IP and subnet range are the
same (e.g. InternalApiNetCidr applies to both IPv4/v6),
only one version can be used at a time. If an operator
wishes to use dual-stack IPv4/IPv6, then two different
networks should be created, and both networks can be
applied to a single interface.

Note that the workflow for the operator is the same as
before this change, but a new example template has been
added to environments/network-environment-v6.yaml.

Change-Id: I0e674e4b1e43786717ae6416571dde3a0e11a5cc
Partially-Implements: blueprint composable-networks
Closes-bug: 1714115
(cherry picked from commit dd299f08bd)
This commit is contained in:
Dan Sneddon 2017-08-30 11:26:52 -07:00 committed by Emilien Macchi
parent a3ee4adaee
commit d88a8dc52a
12 changed files with 216 additions and 473 deletions

View File

@ -0,0 +1,60 @@
#This file is an example of an environment file for defining the isolated
#networks and related parameters.
resource_registry:
# Network Interface templates to use (these files must exist)
OS::TripleO::BlockStorage::Net::SoftwareConfig:
../network/config/single-nic-vlans/cinder-storage.yaml
OS::TripleO::Compute::Net::SoftwareConfig:
../network/config/single-nic-vlans/compute.yaml
OS::TripleO::Controller::Net::SoftwareConfig:
../network/config/single-nic-vlans/controller.yaml
OS::TripleO::ObjectStorage::Net::SoftwareConfig:
../network/config/single-nic-vlans/swift-storage.yaml
OS::TripleO::CephStorage::Net::SoftwareConfig:
../network/config/single-nic-vlans/ceph-storage.yaml
parameter_defaults:
# This section is where deployment-specific configuration is done
# CIDR subnet mask length for provisioning network
ControlPlaneSubnetCidr: '24'
# Gateway router for the provisioning network (or Undercloud IP)
ControlPlaneDefaultRoute: 192.168.24.254
EC2MetadataIp: 192.168.24.1 # Generally the IP of the Undercloud
# Customize the IP subnets to match the local environment
InternalApiNetCidr: 'fd00:fd00:fd00:2000::/64'
StorageNetCidr: 'fd00:fd00:fd00:3000::/64'
StorageMgmtNetCidr: 'fd00:fd00:fd00:4000::/64'
# Tenant tunneling network is IPv4 until IPv6 is fully supported
TenantNetCidr: 172.16.0.0/24
ExternalNetCidr: '2001:db8:fd00:1000::/64'
# Customize the VLAN IDs to match the local environment
InternalApiNetworkVlanID: 20
StorageNetworkVlanID: 30
StorageMgmtNetworkVlanID: 40
TenantNetworkVlanID: 50
ExternalNetworkVlanID: 10
# Customize the IP ranges on each network to use for static IPs and VIPs
InternalApiAllocationPools: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}]
StorageAllocationPools: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}]
StorageMgmtAllocationPools: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}]
TenantAllocationPools: [{'start': '172.16.0.10', 'end': '172.16.0.200'}]
# Leave room if the external network is also used for floating IPs
ExternalAllocationPools: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}]
# Gateway router for the external network
ExternalInterfaceDefaultRoute: '2001:db8:fd00:1000::1'
# Uncomment if using the Management Network (see network-management-v6.yaml)
# ManagementNetCidr: 'fd00:fd00:fd00:6000::/64'
# ManagementAllocationPools: [{'start': 'fd00:fd00:fd00:6000::10', 'end': 'fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe'}]
# Use either this parameter or ControlPlaneDefaultRoute in the NIC templates
# ManagementInterfaceDefaultRoute: 'fd00:fd00:fd00:6000::1'
# Define the DNS servers (maximum 2) for the overcloud nodes
DnsServers: ["8.8.8.8","8.8.4.4"]
# List of Neutron network types for tenant networks (will be used in order)
NeutronNetworkType: 'vxlan,vlan'
# The tunnel type for the tenant network (vxlan or gre). Set to '' to disable tunneling.
NeutronTunnelTypes: 'vxlan'
# Neutron VLAN ranges per network, for example 'datacentre:1:499,tenant:500:1000':
NeutronNetworkVLANRanges: 'datacentre:1:1000'
# Customize bonding options, e.g. "mode=4 lacp_rate=1 updelay=1000 miimon=100"
# for Linux bonds w/LACP, or "bond_mode=active-backup" for OVS active/backup.
BondInterfaceOvsOptions: "bond_mode=active-backup"

View File

@ -5,9 +5,4 @@
# name:
# - puppet/cephstorage-role.yaml
name:
- network/internal_api_v6.yaml
- network/external_v6.yaml
- network/storage_v6.yaml
- network/storage_mgmt_v6.yaml
- network/tenant_v6.yaml
- network/management_v6.yaml
- None

View File

@ -1,76 +0,0 @@
heat_template_version: pike
description: >
External network. Public traffic, Neutron l3router for floating IPs/SNAT, etc.
parameters:
# the defaults here work for static IP assignment (IPAM) only
ExternalNetCidr:
# OpenStack uses the EUI-64 address format, which requires a /64 prefix
default: '2001:db8:fd00:1000::/64'
description: Cidr for the external network.
type: string
ExternalNetValueSpecs:
default: {'provider:physical_network': 'external', 'provider:network_type': 'flat'}
description: Value specs for the external network.
type: json
ExternalNetAdminStateUp:
default: false
description: The admin state of the network.
type: boolean
ExternalNetShared:
default: false
description: Whether this network is shared across all tenants.
type: boolean
ExternalNetName:
default: external
description: The name of the external network.
type: string
ExternalSubnetName:
default: external_subnet
description: The name of the external subnet in Neutron.
type: string
ExternalAllocationPools:
default: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}]
description: Ip allocation pool range for the external network.
type: json
IPv6AddressMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 address mode
type: string
IPv6RAMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 router advertisement mode
type: string
ExternalInterfaceDefaultRoute:
default: '2001:db8:fd00:1000::1'
description: default route for the external network
type: string
resources:
ExternalNetwork:
type: OS::Neutron::Net
properties:
admin_state_up: {get_param: ExternalNetAdminStateUp}
name: {get_param: ExternalNetName}
shared: {get_param: ExternalNetShared}
value_specs: {get_param: ExternalNetValueSpecs}
ExternalSubnet:
type: OS::Neutron::Subnet
properties:
ip_version: 6
ipv6_address_mode: {get_param: IPv6AddressMode}
ipv6_ra_mode: {get_param: IPv6RAMode}
cidr: {get_param: ExternalNetCidr}
name: {get_param: ExternalSubnetName}
network: {get_resource: ExternalNetwork}
allocation_pools: {get_param: ExternalAllocationPools}
gateway_ip: {get_param: ExternalInterfaceDefaultRoute}
outputs:
OS::stack_id:
description: Neutron external network
value: {get_resource: ExternalNetwork}
subnet_cidr:
value: {get_attr: [ExternalSubnet, cidr]}

View File

@ -1,72 +0,0 @@
heat_template_version: pike
description: >
Internal API network. Used for most APIs, Database, RPC.
parameters:
# the defaults here work for static IP assignment (IPAM) only
InternalApiNetCidr:
# OpenStack uses the EUI-64 address format, which requires a /64 prefix
default: 'fd00:fd00:fd00:2000::/64'
description: Cidr for the internal_api network.
type: string
InternalApiNetValueSpecs:
default: {'provider:physical_network': 'internal_api', 'provider:network_type': 'flat'}
description: Value specs for the internal_api network.
type: json
InternalApiNetAdminStateUp:
default: false
description: The admin state of the network.
type: boolean
InternalApiNetShared:
default: false
description: Whether this network is shared across all tenants.
type: boolean
InternalApiNetName:
default: internal_api
description: The name of the internal_api network.
type: string
InternalApiSubnetName:
default: internal_api_subnet
description: The name of the internal_api subnet in Neutron.
type: string
InternalApiAllocationPools:
default: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}]
description: Ip allocation pool range for the internal_api network.
type: json
IPv6AddressMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 address mode
type: string
IPv6RAMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 router advertisement mode
type: string
resources:
InternalApiNetwork:
type: OS::Neutron::Net
properties:
admin_state_up: {get_param: InternalApiNetAdminStateUp}
name: {get_param: InternalApiNetName}
shared: {get_param: InternalApiNetShared}
value_specs: {get_param: InternalApiNetValueSpecs}
InternalApiSubnet:
type: OS::Neutron::Subnet
properties:
ip_version: 6
ipv6_address_mode: {get_param: IPv6AddressMode}
ipv6_ra_mode: {get_param: IPv6RAMode}
cidr: {get_param: InternalApiNetCidr}
name: {get_param: InternalApiSubnetName}
network: {get_resource: InternalApiNetwork}
allocation_pools: {get_param: InternalApiAllocationPools}
gateway_ip: null
outputs:
OS::stack_id:
description: Neutron internal network
value: {get_resource: InternalApiNetwork}
subnet_cidr:
value: {get_attr: [InternalApiSubnet, cidr]}

105
network/network.j2 Normal file
View File

@ -0,0 +1,105 @@
heat_template_version: pike
description: >
{{network.name}} network definition (automatically generated).
parameters:
# the defaults here work for static IP assignment (IPAM) only
{{network.name}}NetCidr:
{%- if network.ipv6 or ipv6_override %}
default: "{{network.ipv6_subnet|default(network.ip_subnet|default(""))}}"
{%- else %}
default: "{{network.ip_subnet|default("")}}"
{%- endif %}
description: Cidr for the {{network.name_lower}} network.
type: string
{{network.name}}NetValueSpecs:
default: {'provider:physical_network': '{{network.name_lower}}', 'provider:network_type': 'flat'}
description: Value specs for the {{network.name_lower}} network.
type: json
{%- if not ":" in network.ip_subnet and not network.ipv6 and not ipv6_override %}
{{network.name}}NetEnableDHCP:
default: false
description: Whether to enable DHCP on the associated subnet (IPv4 only).
type: boolean
{%- endif %}
{{network.name}}NetAdminStateUp:
default: false
description: The admin state of the network.
type: boolean
{{network.name}}NetShared:
default: false
description: Whether this network is shared across all tenants.
type: boolean
{{network.name}}NetName:
default: {{network.name_lower}}
description: The name of the {{network.name_lower}} network.
type: string
{{network.name}}SubnetName:
default: {{network.name_lower}}_subnet
description: The name of the {{network.name_lower}} subnet in Neutron.
type: string
{{network.name}}AllocationPools:
{%- if ":" in network.ip_subnet or network.ipv6 or ipv6_override %}
default: {{network.ipv6_allocation_pools|default(network.allocation_pools|default([]))}}
{%- else %}
default: {{network.allocation_pools|default([])}}
{%- endif %}
description: Ip allocation pool range for the {{network.name_lower}} network.
type: json
{%- if ":" in network.ip_subnet or network.ipv6 or ipv6_override %}
IPv6AddressMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 address mode
type: string
IPv6RAMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 router advertisement mode
type: string
{%- endif %}
{{network.name}}InterfaceDefaultRoute:
{%- if network.ipv6 or ipv6_override %}
default: "{{network.gateway_ipv6|default(network.gateway_ip|default(''))}}"
{%- else %}
default: "{{network.gateway_ip|default('')}}"
{%- endif %}
description: default route for the {{network.name_lower}} network
type: string
{%- if network.vlan %}
{{network.name}}NetworkVlanID:
default: {{network.vlan}}
description: Vlan ID for the {{network.name}} network traffic.
type: number
{%- endif %}
resources:
{{network.name}}Network:
type: OS::Neutron::Net
properties:
admin_state_up: {get_param: {{network.name}}NetAdminStateUp}
name: {get_param: {{network.name}}NetName}
shared: {get_param: {{network.name}}NetShared}
value_specs: {get_param: {{network.name}}NetValueSpecs}
{{network.name}}Subnet:
type: OS::Neutron::Subnet
properties:
{%- if ":" in network.ip_subnet or network.ipv6 or ipv6_override %}
ip_version: 6
ipv6_address_mode: {get_param: IPv6AddressMode}
ipv6_ra_mode: {get_param: IPv6RAMode}
{%- else %}
enable_dhcp: {get_param: {{network.name}}NetEnableDHCP}
{%- endif %}
cidr: {get_param: {{network.name}}NetCidr}
name: {get_param: {{network.name}}SubnetName}
network: {get_resource: {{network.name}}Network}
allocation_pools: {get_param: {{network.name}}AllocationPools}
gateway_ip: {get_param: {{network.name}}InterfaceDefaultRoute}
outputs:
OS::stack_id:
description: {{network.name_lower}} network
value: {get_resource: {{network.name}}Network}
subnet_cidr:
value: {get_attr: [{{network.name}}Subnet, cidr]}

View File

@ -1,91 +1 @@
heat_template_version: pike
description: >
{{network.name}} network definition (automatically generated).
parameters:
# the defaults here work for static IP assignment (IPAM) only
{{network.name}}NetCidr:
default: {{network.ip_subnet|default("")}}
description: Cidr for the {{network.name_lower}} network.
type: string
{{network.name}}NetValueSpecs:
default: {'provider:physical_network': '{{network.name_lower}}', 'provider:network_type': 'flat'}
description: Value specs for the {{network.name_lower}} network.
type: json
{{network.name}}NetAdminStateUp:
default: false
description: The admin state of the network.
type: boolean
{{network.name}}NetEnableDHCP:
default: false
description: Whether to enable DHCP on the associated subnet.
type: boolean
{{network.name}}NetShared:
default: false
description: Whether this network is shared across all tenants.
type: boolean
{{network.name}}NetName:
default: {{network.name_lower}}
description: The name of the {{network.name_lower}} network.
type: string
{{network.name}}SubnetName:
default: {{network.name_lower}}_subnet
description: The name of the {{network.name_lower}} subnet in Neutron.
type: string
{{network.name}}AllocationPools:
default: {{network.allocation_pools|default([])}}
description: Ip allocation pool range for the {{network.name_lower}} network.
type: json
{{network.name}}InterfaceDefaultRoute:
default: {{network.gateway_ip|default('""')}}
description: default route for the {{network.name_lower}} network
type: string
{%- if network.vlan %}
{{network.name}}NetworkVlanID:
default: {{network.vlan}}
description: Vlan ID for the {{network.name}} network traffic.
type: number
{%- endif %}
{%- if network.ipv6 %}
IPv6AddressMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 address mode
type: string
IPv6RAMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 router advertisement mode
type: string
{%- endif %}
resources:
{{network.name}}Network:
type: OS::Neutron::Net
properties:
admin_state_up: {get_param: {{network.name}}NetAdminStateUp}
name: {get_param: {{network.name}}NetName}
shared: {get_param: {{network.name}}NetShared}
value_specs: {get_param: {{network.name}}NetValueSpecs}
{{network.name}}Subnet:
type: OS::Neutron::Subnet
properties:
cidr: {get_param: {{network.name}}NetCidr}
name: {get_param: {{network.name}}SubnetName}
network: {get_resource: {{network.name}}Network}
allocation_pools: {get_param: {{network.name}}AllocationPools}
gateway_ip: {get_param: {{network.name}}InterfaceDefaultRoute}
{%- if network.ipv6 %}
ip_version: 6
ipv6_address_mode: {get_param: IPv6AddressMode}
ipv6_ra_mode: {get_param: IPv6RAMode}
{%- else %}
enable_dhcp: {get_param: {{network.name}}NetEnableDHCP}
{%- endif %}
outputs:
OS::stack_id:
description: {{network.name_lower}} network
value: {get_resource: {{network.name}}Network}
subnet_cidr:
value: {get_attr: [{{network.name}}Subnet, cidr]}
{% include 'network.j2' %}

View File

@ -0,0 +1,2 @@
{% set ipv6_override = true -%}
{% include 'network.j2' %}

View File

@ -1,72 +0,0 @@
heat_template_version: pike
description: >
Storage management network. Storage replication, etc.
parameters:
# the defaults here work for static IP assignment (IPAM) only
StorageMgmtNetCidr:
# OpenStack uses the EUI-64 address format, which requires a /64 prefix
default: 'fd00:fd00:fd00:4000::/64'
description: Cidr for the storage_mgmt network.
type: string
StorageMgmtNetValueSpecs:
default: {'provider:physical_network': 'storage_mgmt', 'provider:network_type': 'flat'}
description: Value specs for the storage_mgmt network.
type: json
StorageMgmtNetAdminStateUp:
default: false
description: The admin state of the network.
type: boolean
StorageMgmtNetShared:
default: false
description: Whether this network is shared across all tenants.
type: boolean
StorageMgmtNetName:
default: storage_mgmt
description: The name of the storage_mgmt network.
type: string
StorageMgmtSubnetName:
default: storage_mgmt_subnet
description: The name of the storage_mgmt subnet in Neutron.
type: string
StorageMgmtAllocationPools:
default: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}]
description: Ip allocation pool range for the storage_mgmt network.
type: json
IPv6AddressMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 address mode
type: string
IPv6RAMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 router advertisement mode
type: string
resources:
StorageMgmtNetwork:
type: OS::Neutron::Net
properties:
admin_state_up: {get_param: StorageMgmtNetAdminStateUp}
name: {get_param: StorageMgmtNetName}
shared: {get_param: StorageMgmtNetShared}
value_specs: {get_param: StorageMgmtNetValueSpecs}
StorageMgmtSubnet:
type: OS::Neutron::Subnet
properties:
ip_version: 6
ipv6_address_mode: {get_param: IPv6AddressMode}
ipv6_ra_mode: {get_param: IPv6RAMode}
cidr: {get_param: StorageMgmtNetCidr}
name: {get_param: StorageMgmtSubnetName}
network: {get_resource: StorageMgmtNetwork}
allocation_pools: {get_param: StorageMgmtAllocationPools}
gateway_ip: null
outputs:
OS::stack_id:
description: Neutron storage management network
value: {get_resource: StorageMgmtNetwork}
subnet_cidr:
value: {get_attr: [StorageMgmtSubnet, cidr]}

View File

@ -1,72 +0,0 @@
heat_template_version: pike
description: >
Storage network.
parameters:
# the defaults here work for static IP assignment (IPAM) only
StorageNetCidr:
# OpenStack uses the EUI-64 address format, which requires a /64 prefix
default: 'fd00:fd00:fd00:3000::/64'
description: Cidr for the storage network.
type: string
StorageNetValueSpecs:
default: {'provider:physical_network': 'storage', 'provider:network_type': 'flat'}
description: Value specs for the storage network.
type: json
StorageNetAdminStateUp:
default: false
description: The admin state of the network.
type: boolean
StorageNetShared:
default: false
description: Whether this network is shared across all tenants.
type: boolean
StorageNetName:
default: storage
description: The name of the storage network.
type: string
StorageSubnetName:
default: storage_subnet
description: The name of the storage subnet in Neutron.
type: string
StorageAllocationPools:
default: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}]
description: Ip allocation pool range for the storage network.
type: json
IPv6AddressMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 address mode
type: string
IPv6RAMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 router advertisement mode
type: string
resources:
StorageNetwork:
type: OS::Neutron::Net
properties:
admin_state_up: {get_param: StorageNetAdminStateUp}
name: {get_param: StorageNetName}
shared: {get_param: StorageNetShared}
value_specs: {get_param: StorageNetValueSpecs}
StorageSubnet:
type: OS::Neutron::Subnet
properties:
ip_version: 6
ipv6_address_mode: {get_param: IPv6AddressMode}
ipv6_ra_mode: {get_param: IPv6RAMode}
cidr: {get_param: StorageNetCidr}
name: {get_param: StorageSubnetName}
network: {get_resource: StorageNetwork}
allocation_pools: {get_param: StorageAllocationPools}
gateway_ip: null
outputs:
OS::stack_id:
description: Neutron storage network
value: {get_resource: StorageNetwork}
subnet_cidr:
value: {get_attr: [StorageSubnet, cidr]}

View File

@ -1,72 +0,0 @@
heat_template_version: pike
description: >
Tenant IPv6 network.
parameters:
# the defaults here work for static IP assignment (IPAM) only
TenantNetCidr:
# OpenStack uses the EUI-64 address format, which requires a /64 prefix
default: 'fd00:fd00:fd00:5000::/64'
description: Cidr for the tenant network.
type: string
TenantNetValueSpecs:
default: {'provider:physical_network': 'tenant', 'provider:network_type': 'flat'}
description: Value specs for the tenant network.
type: json
TenantNetAdminStateUp:
default: false
description: The admin state of the network.
type: boolean
TenantNetShared:
default: false
description: Whether this network is shared across all tenants.
type: boolean
TenantNetName:
default: tenant
description: The name of the tenant network.
type: string
TenantSubnetName:
default: tenant_subnet
description: The name of the tenant subnet in Neutron.
type: string
TenantAllocationPools:
default: [{'start': 'fd00:fd00:fd00:5000::10', 'end': 'fd00:fd00:fd00:5000:ffff:ffff:ffff:fffe'}]
description: Ip allocation pool range for the tenant network.
type: json
IPv6AddressMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 address mode
type: string
IPv6RAMode:
default: dhcpv6-stateful
description: Neutron subnet IPv6 router advertisement mode
type: string
resources:
TenantNetwork:
type: OS::Neutron::Net
properties:
admin_state_up: {get_param: TenantNetAdminStateUp}
name: {get_param: TenantNetName}
shared: {get_param: TenantNetShared}
value_specs: {get_param: TenantNetValueSpecs}
TenantSubnet:
type: OS::Neutron::Subnet
properties:
ip_version: 6
ipv6_address_mode: {get_param: IPv6AddressMode}
ipv6_ra_mode: {get_param: IPv6RAMode}
cidr: {get_param: TenantNetCidr}
name: {get_param: TenantSubnetName}
network: {get_resource: TenantNetwork}
allocation_pools: {get_param: TenantAllocationPools}
gateway_ip: null
outputs:
OS::stack_id:
description: Neutron tenant network
value: {get_resource: TenantNetwork}
subnet_cidr:
value: {get_attr: [TenantSubnet, cidr]}

View File

@ -6,19 +6,22 @@
# name_lower: lowercase version of name used for filenames
# (optional, defaults to name.lower())
# enabled: Is the network enabled (optional, defaults to true)
# ipv6: Does this network use IPv6 IPs? (optional, defaults to false)
# (optional, may use parameter defaults in environment to set)
# vlan: vlan for the network (optional)
# vip: Enable creation of a virtual IP on this network
# [TODO] (dsneddon@redhat.com) - Enable dynamic creation of VIP ports,
# to support VIPs on non-default networks.
# See https://bugs.launchpad.net/tripleo/+bug/1667104
# ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' (optional, may use parameter defaults)
# allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250}]
# ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' or '2001:db8:fd00:1000::/64'
# (optional, may use parameter defaults instead)
# allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250'}]
# gateway_ip: gateway for the network (optional, may use parameter defaults)
# NOTE: IP-related values set parameter defaults in templates, may be overridden.
# compat_name: for existing stack you may need to override the default transformation
# for the resource's name.
# ipv6_subnet: Optional, sets default IPv6 subnet if IPv4 is already defined.
# ipv6_allocation_pools: Set default IPv6 allocation pools if IPv4 allocation pools
# are already defined.
# ipv6_gateway: Set an IPv6 gateway if IPv4 gateway already defined.
# ipv6: If ip_subnet not defined, this specifies that the network is IPv6-only.
# NOTE: IP-related values set parameter defaults in templates, may be overridden,
# either by operators, or e.g in environments/network-isolation-v6.yaml where we
# set some default IPv6 addresses.
# compat_name: for existing stack you may need to override the default
# transformation for the resource's name.
#
# Example:
# - name Example
@ -27,8 +30,17 @@
# allocation_pools: [{'start': '10.0.2.4', 'end': '10.0.2.250'}]
# gateway_ip: '10.0.2.254'
#
# TODO (dsneddon) remove existing templates from j2_excludes.yaml
# and generate all templates dynamically.
# To support backward compatility, two versions of the network definitions will
# be created, network/<network>.yaml and network/<network>_v6.yaml. Only
# one of these files may be used in the deployment at a time, since the
# parameters used for configuration are the same in both files. In the
# future, this behavior may be changed to create only one file for custom
# networks. You may specify IPv6 addresses for ip_subnet, allocation_pools,
# and gateway_ip if no IPv4 addresses are used for a custom network, or set
# ipv6: true, and the network/<network>.yaml file will be configured as IPv6.
#
# For configuring both IPv4 and IPv6 on the same interface, use two separate
# networks, and then assign both IPs in the custom NIC configuration templates.
- name: External
vip: true
@ -36,27 +48,38 @@
ip_subnet: '10.0.0.0/24'
allocation_pools: [{'start': '10.0.0.4', 'end': '10.0.0.250'}]
gateway_ip: '10.0.0.1'
ipv6_subnet: '2001:db8:fd00:1000::/64'
ipv6_allocation_pools: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}]
gateway_ipv6: '2001:db8:fd00:1000::1'
- name: InternalApi
name_lower: internal_api
vip: true
ip_subnet: '172.16.2.0/24'
allocation_pools: [{'start': '172.16.2.4', 'end': '172.16.2.250'}]
ipv6_subnet: 'fd00:fd00:fd00:2000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}]
compat_name: Internal
- name: Storage
vip: true
name_lower: storage
ip_subnet: '172.16.1.0/24'
allocation_pools: [{'start': '172.16.1.4', 'end': '172.16.1.250'}]
ipv6_subnet: 'fd00:fd00:fd00:3000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}]
- name: StorageMgmt
name_lower: storage_mgmt
vip: true
ip_subnet: '172.16.3.0/24'
allocation_pools: [{'start': '172.16.3.4', 'end': '172.16.3.250'}]
ipv6_subnet: 'fd00:fd00:fd00:4000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}]
- name: Tenant
vip: false # Tenant network does not use VIPs
name_lower: tenant
ip_subnet: '172.16.0.0/24'
allocation_pools: [{'start': '172.16.0.4', 'end': '172.16.0.250'}]
ipv6_subnet: 'fd00:fd00:fd00:5000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5000::10', 'end': 'fd00:fd00:fd00:5000:ffff:ffff:ffff:fffe'}]
- name: Management
# Management network is disabled by default
enabled: false
@ -64,3 +87,5 @@
name_lower: management
ip_subnet: '10.0.1.0/24'
allocation_pools: [{'start': '10.0.1.4', 'end': '10.0.1.250'}]
ipv6_subnet: 'fd00:fd00:fd00:6000::/64'
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:6000::10', 'end': 'fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe'}]

View File

@ -0,0 +1,10 @@
---
other:
- |
Network templates are now rendered with jinja2 based on network_data.yaml.
The only required parameter for each network is the name, optional params
will populate the defaults in the network template. Network templates
will be generated for both IPv4 and IPv6 versions of the networks, setting
ipv6: true on the network will generate only IPv6 templates. An example for
overriding default IP addresses for IPv6 has been added in
environments/network-environment-v6.yaml.