This change adds a sample network-environment.yaml file to the
environments. This sample includes pointers to NIC config files,
as well as default network subnets and allocation pools.
This is meant to be a demonstration of the default settings for
a virtual deployment. In a real deployment, the operator would
customize the settings here and point to custom NIC config
templates.
Change-Id: I0288c0680effea06b5f805a0d955e8bbf6152ba6
By configuring the Cinder 'host' setting via the appropriate class
param instead of cinder_config we don't risk to override it if the
user is to pass additional config settings using cinder_config in
ExtraConfig.
Change-Id: Idf33d87e08355b5b4369ccb0001db8d4c3b4c20f
This change adds puppet hieradata settings which disable IPv6
autoconfiguration and accept_ra by default on all interfaces.
When IPv6 is used, the interfaces are individually enabled and
configured with static IP addresses.
The networking on the compute host needs to be completely
separate from the tenant networking, in order to safeguard the
compute host and isolate tenant traffic. This change disables
IPv6 autoconfiguration and acceptance of RAs by default on
interfaces unless specifically enabled.
Without these settings, IPv6 is enabled on all interfaces, as well
as autoconfiguration and accept_ra, so when the compute host
creates a bridge interface for the router (qbr-<ID>), the
compute node will automatically assign an IPv6 address and will
install a default IPv6 route on the bridge interface when it
receives the RAs from the Neutron router.
The change to turn off autoconfiguration means that interfaces
will not self-assign an IPv6 address, and the change to not accept
RAs is a security hardening feature. This requires that a
static gateway address be declared in the network environment
in the parameter ExternalNetworkDefaultRoute. Alternately, sysctl
can be modified to change the accept_ra behavior for specific
interfaces.
Change-Id: I8a8d311a14b41baf6e7e1b8ce26a63abc2eaabef
Closes-bug: 1544296
This change adds the TripleO Heat Parameters and Puppet hieradata
to support setting the MTU for Neutron tenant networks. A new
parameter, NeutronTenantMtu is introduced, and this gets used for
the NeutronDnsmasqOptions and in Puppet hieradata.
NeutronTenantMtu is also used in the Puppet hieradata for both the
compute and control nodes. Two values are set:
nova::compute::network_device_mtu
which sets /etc/nova/nova.conf: network_device_mtu = <NeutronTenantMtu>
neutron::network_device_mtu
which sets in /etc/neutron/neutron.conf:
network_device_mtu = <NeutronTenantMtu>
finally, the NeutronDnsmasqOptions parameter becomes a str_format
that maps the NeutronTenantMtu onto the DHCP options,
so a default of 'dhcp-option-force=26,%MTU%' would be formatted to
'dhcp-option-force=26,1300' if NeutronTenantMtu were 1300.
This will set dnsmasq to serve an MTU via DHCP that matches the
NeutronTenantMtu:
/etc/neutron/dnsmasq-neutron.conf:dhcp-option-force=26,1300
Typically, you would change all three of these settings to use small
or jumbo frames in VMs. When using tunneling, NeutronTenantMtu
should be set at least 50 bytes smaller than the physical network
MTU in order to make room for tunneling overhead.
Note that this change does not support setting the MTU on veth
interfaces if veth patches are used to br-int instead of OVS
patches.
Change-Id: I38840e082ee01dc3b6fc78e1dd97f53fa4e63039
Currently the permissions for the CA file that is injected (if the
environment is set), doesn't permit users that don't belong to the group
that owns the file to read it. This is too restrictive and isn't
necessary, as the certificate should be public.
This is useful in the case where we want a service that can't read the
certificate chain (or bundle) to be able to read that CA certificate.
This is the case for the MariaDB version that is being used in CentOS
7.1 for example.
Change-Id: I6ff59326a5570670c031b448fb0ffd8dfbd8b025
We were incorrectly wiring the rbd user to the relevant glance
module parameter, making it was impossible to customize the
rbd user when using an external Ceph.
Change-Id: Ibe4eaedf986a9077f869c6530381e69ee0281f5b
Changed the heat-docker-agents namespace to use the namespacing
specified in the environment file, which reduces modifications required
on the user when using a local registry.
Changed the start agents script to handle using a local registry both
with a namespace and without.
Change-Id: I16cc96b7ecddeeda07de45f50ffc6a880dabbba6
This hieradata key, neutron::agents::ml2::ovs:bridge_mappings was
missing a : before bridge_mappings causing the value to be blank in
/etc/neutron/plugins/ml2/openvswitch_agent.ini even if a value had been
specified.
Change-Id: I377565d3fb821be1bb2dc7d92ec1ad25a4a3b1f1
This enables the creation of the nova_api database that is now
mandatory since https://review.openstack.org/#/c/245828/
Change-Id: Ia8242f23864ebb14ccf858a77ba754059e9c2d4a
Related-Bug: #1539793
For both HA & non-HA scenarios, switch puppet-keystone configuration to
be run in a WSGI process instead of eventlet.
WSGI is the way to go for scaling Keystone, moreover, eventlet won't be
support in next OpenStack releases.
Co-Authored-By: Dan Prince <dprince@redhat.com>
Depends-On: I22a348c298ff44f616b2e898f4872eddea040239
Change-Id: I862b4a68f43347564ec3c0ddc4ec9e1d1c755cf2
Signed-off-by: Jason Guiditta <jguiditt@redhat.com>
During high load, the default limit of the kernel connection tracking
table (65536) is often too low, resuling in error messages such as:
kernel: nf_conntrack: table full, dropping packet
This patch increases the limit to 500,000.
Since the nf_conntrack kernel module is not always loaded by default, it also
adds a mechanism to load kernel modules via hieradata using the kmod puppet
module. In order to express the needed dependency in puppet that kernel modules
are loaded before sysctl settings are applied, the Exec resources tagged with
'kmod::load' are specified in a resource collector to express that that Exec
resources with the tag should run before Sysctl resources.
Depends-On: I59cc2280ebae315af38fb5008e6ee0073195ae51
Change-Id: Iffa0a77852729786b69945c1e72bc90ad57ce3bb
Updated the setting for the dell storage center
api port to the right variable name ::dell_sc_api_port
Change-Id: I67a7533469947355629b6cb54b79759e21e0ec55
This change will set a common value for 'host' across all
controllers. We missed to do so for the NFS backend previously.
It will still be possible to set a different per-backend 'host'
value by providing it via ExtraData.
Change-Id: I00fd05660a15be3611e1a394650be6ab713670f9
The maximum payload size of the return signal from a Heat software
deployment is 1MB, and the output of yum starts breaking this limit at
~1000 packages to update - which is not an atypical number. To prevent
this, pass the -q (quiet) option to reduce the amount of output to a
manageable level.
Change-Id: I517271e8465885421a78b73c5af756816c37a977
Resolves-rhbz: #1304878
Closes-Bug: #1543034
When we utilise images for deployment, the iSCSI initiator name
is not unique, leading to problems with live migration. This
patch simply updates the iSCSI initiator name to a unique ID
randomly generated by iscsi-iname.
https://bugzilla.redhat.com/show_bug.cgi?id=1244328
Change-Id: I170e7f45f67fa8ce70436f24807d1ed7808f2c32
Dan Sneddon