heat_template_version: rocky description: > Software Config to no-op for os-net-config. Using this will allow you to use the parameter driven (init-neutron-ovs) configuration instead. parameters: ControlPlaneIp: default: '' description: IP address/subnet on the ctlplane network type: string ControlPlaneSubnetCidr: default: '' description: > The subnet CIDR of the control plane network. (The parameter is automatically resolved from the ctlplane subnet's cidr attribute.) type: string ControlPlaneDefaultRoute: default: '' description: The default route of the control plane network. (The parameter is automatically resolved from the ctlplane subnet's gateway_ip attribute.) type: string DnsServers: # Override this via parameter_defaults default: [] description: > DNS servers to use for the Overcloud (2 max for some implementations). If not set the nameservers configured in the ctlplane subnet's dns_nameservers attribute will be used. type: comma_delimited_list EC2MetadataIp: # Here for compatability, not used. default: '' description: The IP address of the EC2 metadata server. (The parameter is automatically resolved from the ctlplane subnet's host_routes attribute.) type: string {%- for network in networks %} {{network.name}}IpSubnet: default: '' description: IP address/subnet on the {{network.name_lower}} network type: string {{network.name}}InterfaceRoutes: default: [] description: > Routes for the {{network.name_lower}} network traffic. JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}] Unless the default is changed, the parameter is automatically resolved from the subnet host_routes attribute. type: json {%- endfor %} resources: OsNetConfigImpl: type: OS::Heat::StructuredConfig properties: group: apply-config config: {} outputs: OS::stack_id: description: The OsNetConfigImpl resource. value: {get_resource: OsNetConfigImpl}