You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
128 lines
5.7 KiB
128 lines
5.7 KiB
# List of networks, used for j2 templating of enabled networks |
|
# |
|
# Supported values: |
|
# |
|
# name: Name of the network (mandatory) |
|
# name_lower: lowercase version of name used for filenames |
|
# (optional, defaults to name.lower()) |
|
# enabled: Is the network enabled (optional, defaults to true) |
|
# NOTE: False will use noop.yaml for unused legacy networks to support upgrades. |
|
# vlan: vlan for the network (optional) |
|
# vip: Enable creation of a virtual IP on this network. Only for networks attached |
|
# to the roles running high-availability clustering (Controller by default). |
|
# ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' or '2001:db8:fd00:1000::/64' |
|
# (optional, may use parameter defaults instead) |
|
# allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250'}] |
|
# gateway_ip: gateway for the network (optional, may use parameter defaults) |
|
# routes: Optional, list of networks that should be routed via network gateway. |
|
# Example: [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}] |
|
# A single /16 supernet route could be used for 255 smaller /24 subnets. |
|
# ipv6_subnet: Optional, sets default IPv6 subnet if IPv4 is already defined. |
|
# ipv6_allocation_pools: Set default IPv6 allocation pools if IPv4 allocation pools |
|
# are already defined. |
|
# gateway_ipv6: Set an IPv6 gateway if IPv4 gateway already defined. |
|
# ipv6: If ip_subnet not defined, this specifies that the network is IPv6-only. |
|
# NOTE: IP-related values set parameter defaults in templates, may be overridden, |
|
# either by operators, or e.g in environments/network-isolation-v6.yaml where we |
|
# set some default IPv6 addresses. |
|
# compat_name: for existing stack you may need to override the default |
|
# transformation for the resource's name. |
|
# mtu: Set the maximum transmission unit (MTU) that is guaranteed to pass |
|
# through the data path of the segments in the network. |
|
# (optional, defaults to 1500) |
|
# |
|
# Example: |
|
# - name Example |
|
# vip: false |
|
# ip_subnet: '10.0.2.0/24' |
|
# allocation_pools: [{'start': '10.0.2.4', 'end': '10.0.2.250'}] |
|
# gateway_ip: '10.0.2.254' |
|
# |
|
# To support backward compatibility, two versions of the network definitions |
|
# will be created, network/<network>.yaml and network/<network>_v6.yaml. Only |
|
# one of these files may be used in the deployment at a time, since the |
|
# parameters used for configuration are the same in both files. In the |
|
# future, this behavior may be changed to create only one file for custom |
|
# networks. You may specify IPv6 addresses for ip_subnet, allocation_pools, |
|
# and gateway_ip if no IPv4 addresses are used for a custom network, or set |
|
# ipv6: true, and the network/<network>.yaml file will be configured as IPv6. |
|
# |
|
# For configuring both IPv4 and IPv6 on the same interface, use two separate |
|
# networks, and then assign both IPs to the same interface in a custom NIC |
|
# configuration templates. |
|
# |
|
# The ordering of the networks below will determine the order in which NICs |
|
# are assigned in the network/config/multiple-nics templates, beginning with |
|
# NIC2, Control Plane is always NIC1. |
|
|
|
- name: Storage |
|
vip: true |
|
vlan: 30 |
|
name_lower: storage |
|
ip_subnet: '172.16.1.0/24' |
|
allocation_pools: [{'start': '172.16.1.4', 'end': '172.16.1.250'}] |
|
ipv6_subnet: 'fd00:fd00:fd00:3000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}] |
|
mtu: 1500 |
|
- name: StorageMgmt |
|
name_lower: storage_mgmt |
|
vip: true |
|
vlan: 40 |
|
ip_subnet: '172.16.3.0/24' |
|
allocation_pools: [{'start': '172.16.3.4', 'end': '172.16.3.250'}] |
|
ipv6_subnet: 'fd00:fd00:fd00:4000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}] |
|
mtu: 1500 |
|
- name: InternalApi |
|
name_lower: internal_api |
|
vip: true |
|
vlan: 20 |
|
ip_subnet: '172.16.2.0/24' |
|
allocation_pools: [{'start': '172.16.2.4', 'end': '172.16.2.250'}] |
|
ipv6_subnet: 'fd00:fd00:fd00:2000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}] |
|
mtu: 1500 |
|
- name: Tenant |
|
vip: false # Tenant network does not use VIPs |
|
name_lower: tenant |
|
vlan: 50 |
|
ip_subnet: '172.16.0.0/24' |
|
allocation_pools: [{'start': '172.16.0.4', 'end': '172.16.0.250'}] |
|
ipv6_subnet: 'fd00:fd00:fd00:5000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5000::10', 'end': 'fd00:fd00:fd00:5000:ffff:ffff:ffff:fffe'}] |
|
mtu: 1500 |
|
- name: External |
|
vip: true |
|
name_lower: external |
|
vlan: 10 |
|
ip_subnet: '10.0.0.0/24' |
|
allocation_pools: [{'start': '10.0.0.4', 'end': '10.0.0.250'}] |
|
gateway_ip: '10.0.0.1' |
|
ipv6_subnet: '2001:db8:fd00:1000::/64' |
|
ipv6_allocation_pools: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: '2001:db8:fd00:1000::1' |
|
mtu: 1500 |
|
- name: Management |
|
# Management network is enabled by default for backwards-compatibility, but |
|
# is not included in any roles by default. Add to role definitions to use. |
|
enabled: true |
|
vip: false # Management network does not use VIPs |
|
name_lower: management |
|
vlan: 60 |
|
ip_subnet: '10.0.1.0/24' |
|
allocation_pools: [{'start': '10.0.1.4', 'end': '10.0.1.250'}] |
|
gateway_ip: '10.0.1.1' |
|
gateway_ipv6: 'fd00:fd00:fd00:6000::1' |
|
ipv6_subnet: 'fd00:fd00:fd00:6000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:6000::10', 'end': 'fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe'}] |
|
mtu: 1500 |
|
- name: StorageDashboard |
|
enabled: true |
|
vip: true |
|
name_lower: storage_dashboard |
|
vlan: 70 |
|
ip_subnet: '172.16.5.0/24' |
|
allocation_pools: [{'start': '172.16.5.4', 'end': '172.16.5.250'}] |
|
ipv6_subnet: 'fd00:fd00:fd00:8000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:8000::10', 'end': 'fd00:fd00:fd00:8000:ffff:ffff:ffff:fffe'}] |
|
mtu: 1500
|
|
|