You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
66 lines
3.3 KiB
66 lines
3.3 KiB
# NOTE: This file is deprecated, and is included for backwards-compatibility |
|
# for use in upgrades. For new deployments, set ipv6: true for isolated |
|
# networks using IPv6 (Tenant network should use IPv4 for tunneling), |
|
# and set the default_route_networks to "['ControlPlane', 'External']" |
|
# on the Controller role to use ControlPlane for IPv4 and External for IPv6 |
|
# default routes, and include network-environment.yaml instead of this file. |
|
resource_registry: |
|
# Network Interface templates to use (these files must exist). You can |
|
# override these by including one of the net-*.yaml environment files, |
|
# such as net-bond-with-vlans-v6.yaml, or modifying the list here. |
|
{%- for role in roles %} |
|
# Port assignments for the {{role.name}} |
|
OS::TripleO::{{role.name}}::Net::SoftwareConfig: |
|
../network/config/single-nic-vlans/{{role.deprecated_nic_config_name|default(role.name.lower() ~ ".yaml")}} |
|
{%- endfor %} |
|
|
|
parameter_defaults: |
|
# This section is where deployment-specific configuration is done |
|
# CIDR subnet mask length for provisioning network |
|
ControlPlaneSubnetCidr: '24' |
|
# Gateway router for the provisioning network (or Undercloud IP) |
|
ControlPlaneDefaultRoute: 192.168.24.254 |
|
EC2MetadataIp: 192.168.24.1 # Generally the IP of the Undercloud |
|
# Customize the IP subnets to match the local environment |
|
{%- for network in networks if network.enabled|default(true) %} |
|
{%- if network.name != 'Tenant' %} |
|
{{network.name}}NetCidr: '{{network.ipv6_subnet}}' |
|
{%- else %} |
|
# Tenant tunneling network is IPv4 until IPv6 is fully supported |
|
{{network.name}}NetCidr: '{{network.ip_subnet}}' |
|
{%- endif %} |
|
{%- endfor %} |
|
# Customize the VLAN IDs to match the local environment |
|
{%- for network in networks if network.enabled|default(true) %} |
|
{%- if network.vlan is defined %} |
|
{{network.name}}NetworkVlanID: {{network.vlan}} |
|
{%- endif %} |
|
{%- endfor %} |
|
# Customize the IP ranges on each network to use for static IPs and VIPs |
|
{%- for network in networks if network.enabled|default(true) %} |
|
{%- if network.name == 'External' %} |
|
# Leave room if the external network is also used for floating IPs |
|
{%- endif %} |
|
{%- if network.name != 'Tenant' %} |
|
{{network.name}}AllocationPools: {{network.ipv6_allocation_pools}} |
|
{%- else %} |
|
# Tenant tunneling network should be IPv4 |
|
{{network.name}}AllocationPools: {{network.ip_allocation_pools}} |
|
{%- endif %} |
|
{%- endfor %} |
|
# Gateway routers for routable networks |
|
{%- for network in networks if network.enabled|default(true) and network.gateway_ipv6|default(false) %} |
|
{{network.name}}InterfaceDefaultRoute: '{{network.gateway_ipv6}}' |
|
{%- endfor %} |
|
{#- FIXME: These global parameters should be defined in a YAML file, e.g. network_data.yaml. #} |
|
# Define the DNS servers (maximum 2) for the overcloud nodes |
|
DnsServers: ["8.8.8.8","8.8.4.4"] |
|
# List of Neutron network types for tenant networks (will be used in order) |
|
NeutronNetworkType: 'vxlan,vlan' |
|
# The tunnel type for the tenant network (vxlan or gre). Set to '' to disable tunneling. |
|
NeutronTunnelTypes: 'vxlan' |
|
# Neutron VLAN ranges per network, for example 'datacentre:1:499,tenant:500:1000': |
|
NeutronNetworkVLANRanges: 'datacentre:1:1000' |
|
# Customize bonding options, e.g. "mode=4 lacp_rate=1 updelay=1000 miimon=100" |
|
# for Linux bonds w/LACP, or "bond_mode=active-backup" for OVS active/backup. |
|
BondInterfaceOvsOptions: "bond_mode=active-backup"
|
|
|