You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
187 lines
8.7 KiB
187 lines
8.7 KiB
# List of networks, used for j2 templating of routed networks |
|
# |
|
# Supported values: |
|
# |
|
# name: Name of the network (mandatory) |
|
# name_lower: lowercase version of name used for filenames |
|
# (optional, defaults to name.lower()) |
|
# service_net_map_replace: if name_lower is set to a custom name this should be set |
|
# to original default (optional). This field is only necessary when |
|
# changing the default network names, not when adding a new custom network. |
|
# enabled: Is the network enabled (optional, defaults to true) |
|
# NOTE: False will use noop.yaml for unused legacy networks to support upgrades. |
|
# vlan: vlan for the network (optional) |
|
# vip: Enable creation of a virtual IP on this network |
|
# ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' or '2001:db8:fd00:1000::/64' |
|
# (optional, may use parameter defaults instead) |
|
# allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250'}] |
|
# gateway_ip: gateway for the network (optional, may use parameter defaults) |
|
# routes: Optional, list of networks that should be routed via network gateway. |
|
# Example: [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}] |
|
# A single /16 supernet route could be used for 255 smaller /24 subnets. |
|
# ipv6_subnet: Optional, sets default IPv6 subnet if IPv4 is already defined. |
|
# ipv6_allocation_pools: Set default IPv6 allocation pools if IPv4 allocation pools |
|
# are already defined. |
|
# ipv6_gateway: Set an IPv6 gateway if IPv4 gateway already defined. |
|
# routes_ipv6: Optional, list of networks that should be routed via network gateway. |
|
# Example: [{'destination':'fd00:fd00:fd00:3004::/64', |
|
# 'nexthop':'fd00:fd00:fd00:3000::1'}] |
|
# ipv6: If ip_subnet not defined, this specifies that the network is IPv6-only. |
|
# NOTE: IP-related values set parameter defaults in templates, may be overridden, |
|
# either by operators, or e.g in environments/network-isolation-v6.yaml where we |
|
# set some default IPv6 addresses. |
|
# compat_name: for existing stack you may need to override the default |
|
# transformation for the resource's name. |
|
# subnets: A map of additional subnets for the network (optional). The map |
|
# takes the following format: |
|
# {'<subnet name>': {'enabled': '<true|false>', |
|
# 'vlan': '<vlan-id>', |
|
# 'ip_subnet': '<IP/CIDR>', |
|
# 'allocation_pools': '<IP range list>', |
|
# 'gateway_ip': '<gateway IP>', |
|
# 'routes': '<Routes list>', |
|
# 'ipv6_subnet': '<IPv6/CIDR>', |
|
# 'ipv6_allocation_pools': '<IPv6 range list>', |
|
# 'gateway_ipv6': '<IPv6 gateway>', |
|
# 'routes_ipv6': '<Routes list>'}} |
|
# |
|
# Example: |
|
# - name Example |
|
# vip: false |
|
# ip_subnet: '10.0.2.0/24' |
|
# allocation_pools: [{'start': '10.0.2.4', 'end': '10.0.2.250'}] |
|
# gateway_ip: '10.0.2.254' |
|
# subnets: |
|
# example_siteB_rack1: |
|
# vlan: 11 |
|
# ip_subnet: '172.16.1.64/26' |
|
# allocation_pools: [{'start': '172.16.1.70', 'end': '172.16.1.110'}] |
|
# gateway_ip: '172.16.1.65' |
|
# |
|
# To support backward compatility, two versions of the network definitions will |
|
# be created, network/<network>.yaml and network/<network>_v6.yaml. Only |
|
# one of these files may be used in the deployment at a time, since the |
|
# parameters used for configuration are the same in both files. In the |
|
# future, this behavior may be changed to create only one file for custom |
|
# networks. You may specify IPv6 addresses for ip_subnet, allocation_pools, |
|
# and gateway_ip if no IPv4 addresses are used for a custom network, or set |
|
# ipv6: true, and the network/<network>.yaml file will be configured as IPv6. |
|
# |
|
# For configuring both IPv4 and IPv6 on the same interface, use two separate |
|
# networks, and then assign both IPs to the same interface in a custom NIC |
|
# configuration templates. |
|
# |
|
# The ordering of the networks below will determine the order in which NICs |
|
# are assigned in the network/config/multiple-nics templates, beginning with |
|
# NIC2, Control Plane is always NIC1. |
|
|
|
- name: External |
|
vip: true |
|
name_lower: external |
|
vlan: 100 |
|
ip_subnet: '10.0.0.0/24' |
|
allocation_pools: [{'start': '10.0.0.4', 'end': '10.0.0.250'}] |
|
gateway_ip: '10.0.0.1' |
|
ipv6_subnet: '2001:db8:fd00:1000::/64' |
|
ipv6_allocation_pools: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: '2001:db8:fd00:1000::1' |
|
- name: InternalApi |
|
name_lower: internal_api |
|
vip: true |
|
vlan: 10 |
|
ip_subnet: '172.17.0.0/24' |
|
allocation_pools: [{'start': '172.17.0.10', 'end': '172.17.0.250'}] |
|
gateway_ip: '172.17.0.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:1000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:1000::10', 'end': 'fd00:fd00:fd00:1000:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:1000::1' |
|
subnets: |
|
internal_api_leaf1: |
|
vlan: 11 |
|
ip_subnet: '172.17.1.0/24' |
|
allocation_pools: [{'start': '172.17.1.10', 'end': '172.17.1.250'}] |
|
gateway_ip: '172.17.1.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:1001::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:1001::10', 'end': 'fd00:fd00:fd00:1001:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:1001::1' |
|
- name: Storage |
|
vip: true |
|
vlan: 20 |
|
name_lower: storage |
|
ip_subnet: '172.18.0.0/24' |
|
allocation_pools: [{'start': '172.18.0.10', 'end': '172.18.0.250'}] |
|
gateway_ip: '172.18.0.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:2000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:2000::1' |
|
subnets: |
|
storage_leaf1: |
|
vlan: 21 |
|
ip_subnet: '172.18.1.0/24' |
|
allocation_pools: [{'start': '172.18.1.10', 'end': '172.18.1.250'}] |
|
gateway_ip: '172.18.1.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:2001::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2001::10', 'end': 'fd00:fd00:fd00:2001:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:2001::1' |
|
- name: StorageMgmt |
|
name_lower: storage_mgmt |
|
vip: true |
|
vlan: 30 |
|
ip_subnet: '172.19.0.0/24' |
|
allocation_pools: [{'start': '172.19.0.10', 'end': '172.19.0.250'}] |
|
gateway_ip: '172.19.0.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:3000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:3000::1' |
|
subnets: |
|
storage_mgmt_leaf1: |
|
vlan: 31 |
|
ip_subnet: '172.19.1.0/24' |
|
allocation_pools: [{'start': '172.19.1.10', 'end': '172.19.1.250'}] |
|
gateway_ip: '172.19.1.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:3001::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3001::10', 'end': 'fd00:fd00:fd00:3001:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:3001::1' |
|
- name: Tenant |
|
vip: false # Tenant network does not use VIPs |
|
name_lower: tenant |
|
vlan: 40 |
|
ip_subnet: '172.16.0.0/24' |
|
allocation_pools: [{'start': '172.16.0.10', 'end': '172.16.0.250'}] |
|
gateway_ip: '172.16.0.254' |
|
# Note that tenant tunneling is only compatible with IPv4 addressing at this time. |
|
ipv6_subnet: 'fd00:fd00:fd00:4000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:4000::1' |
|
subnets: |
|
tenant_leaf1: |
|
vlan: 41 |
|
ip_subnet: '172.16.1.0/24' |
|
allocation_pools: [{'start': '172.16.1.10', 'end': '172.16.1.250'}] |
|
gateway_ip: '172.16.1.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:4001::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4001::10', 'end': 'fd00:fd00:fd00:4001:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:4001::1' |
|
- name: Management |
|
# Management network is enabled by default for backwards-compatibility, but |
|
# is not included in any roles by default. Add to role definitions to use. |
|
enabled: true |
|
vip: false # Management network does not use VIPs |
|
name_lower: management |
|
vlan: 50 |
|
ip_subnet: '172.20.0.0/24' |
|
allocation_pools: [{'start': '172.20.0.10', 'end': '172.20.0.250'}] |
|
gateway_ip: '172.20.0.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:5000::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5000::10', 'end': 'fd00:fd00:fd00:5000:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:5000::1' |
|
subnets: |
|
management_leaf1: |
|
enabled: true |
|
vlan: 51 |
|
ip_subnet: '172.20.1.0/24' |
|
allocation_pools: [{'start': '172.20.1.10', 'end': '172.20.1.250'}] |
|
gateway_ip: '172.20.1.254' |
|
ipv6_subnet: 'fd00:fd00:fd00:5001::/64' |
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5001::10', 'end': 'fd00:fd00:fd00:5001:ffff:ffff:ffff:fffe'}] |
|
gateway_ipv6: 'fd00:fd00:fd00:5001::1'
|
|
|