Heat templates for deploying OpenStack
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 

66 lines
3.3 KiB

# NOTE: This file is deprecated, and is included for backwards-compatibility
# for use in upgrades. For new deployments, set ipv6: true for isolated
# networks using IPv6 (Tenant network should use IPv4 for tunneling),
# and set the default_route_networks to "['ControlPlane', 'External']"
# on the Controller role to use ControlPlane for IPv4 and External for IPv6
# default routes, and include network-environment.yaml instead of this file.
resource_registry:
# Network Interface templates to use (these files must exist). You can
# override these by including one of the net-*.yaml environment files,
# such as net-bond-with-vlans-v6.yaml, or modifying the list here.
{%- for role in roles %}
# Port assignments for the {{role.name}}
OS::TripleO::{{role.name}}::Net::SoftwareConfig:
../network/config/single-nic-vlans/{{role.deprecated_nic_config_name|default(role.name.lower() ~ ".yaml")}}
{%- endfor %}
parameter_defaults:
# This section is where deployment-specific configuration is done
# CIDR subnet mask length for provisioning network
ControlPlaneSubnetCidr: '24'
# Gateway router for the provisioning network (or Undercloud IP)
ControlPlaneDefaultRoute: 192.168.24.254
EC2MetadataIp: 192.168.24.1 # Generally the IP of the Undercloud
# Customize the IP subnets to match the local environment
{%- for network in networks if network.enabled|default(true) %}
{%- if network.name != 'Tenant' %}
{{network.name}}NetCidr: '{{network.ipv6_subnet}}'
{%- else %}
# Tenant tunneling network is IPv4 until IPv6 is fully supported
{{network.name}}NetCidr: '{{network.ip_subnet}}'
{%- endif %}
{%- endfor %}
# Customize the VLAN IDs to match the local environment
{%- for network in networks if network.enabled|default(true) %}
{%- if network.vlan is defined %}
{{network.name}}NetworkVlanID: {{network.vlan}}
{%- endif %}
{%- endfor %}
# Customize the IP ranges on each network to use for static IPs and VIPs
{%- for network in networks if network.enabled|default(true) %}
{%- if network.name == 'External' %}
# Leave room if the external network is also used for floating IPs
{%- endif %}
{%- if network.name != 'Tenant' %}
{{network.name}}AllocationPools: {{network.ipv6_allocation_pools}}
{%- else %}
# Tenant tunneling network should be IPv4
{{network.name}}AllocationPools: {{network.ip_allocation_pools}}
{%- endif %}
{%- endfor %}
# Gateway routers for routable networks
{%- for network in networks if network.enabled|default(true) and network.gateway_ipv6|default(false) %}
{{network.name}}InterfaceDefaultRoute: '{{network.gateway_ipv6}}'
{%- endfor %}
{#- FIXME: These global parameters should be defined in a YAML file, e.g. network_data.yaml. #}
# Define the DNS servers (maximum 2) for the overcloud nodes
DnsServers: ["8.8.8.8","8.8.4.4"]
# List of Neutron network types for tenant networks (will be used in order)
NeutronNetworkType: 'vxlan,vlan'
# The tunnel type for the tenant network (vxlan or gre). Set to '' to disable tunneling.
NeutronTunnelTypes: 'vxlan'
# Neutron VLAN ranges per network, for example 'datacentre:1:499,tenant:500:1000':
NeutronNetworkVLANRanges: 'datacentre:1:1000'
# Customize bonding options, e.g. "mode=4 lacp_rate=1 updelay=1000 miimon=100"
# for Linux bonds w/LACP, or "bond_mode=active-backup" for OVS active/backup.
BondInterfaceOvsOptions: "bond_mode=active-backup"