openstack/tripleo-heat-templates
Code Issues Proposed changes
Files
2d7a9a579a911975bf52b8152e2edc8de20ce143
tripleo-heat-templates/overcloud-resource-registry-puppet.yaml
Steven Hardy ea1294fe9b Pacemaker maintenance mode for the duration of Puppet run on update 
This enables pacemaker maintenantce mode when running Puppet on stack
update. Puppet can try to restart some overcloud services, which
pacemaker tries to prevent, and this can result in a failed Puppet run.

At the end of the puppet run, certain pacemaker resources are restarted
in an additional SoftwareDeployment to make sure that any config changes
have been fully applied. This is only done on stack updates (when
UpdateIdentifier is set to something), because the assumption is that on
stack create services already come up with the correct config.

(Change I9556085424fa3008d7f596578b58e7c33a336f75 has been squashed into
this one.)

Change-Id: I4d40358c511fc1f95b78a859e943082aaea17899
Co-Authored-By: Jiri Stransky <jistr@redhat.com>
Co-Authored-By: James Slagle <jslagle@redhat.com>
2015-12-14 14:24:13 +01:00

108 lines
5.6 KiB
YAML
Raw Blame History

resource_registry:
OS::TripleO::BlockStorage: puppet/cinder-storage.yaml
OS::TripleO::BlockStorage::Net::SoftwareConfig: net-config-noop.yaml
OS::TripleO::Compute: puppet/compute.yaml
OS::TripleO::Compute::Net::SoftwareConfig: net-config-noop.yaml
OS::TripleO::SoftwareDeployment: OS::Heat::StructuredDeployment
OS::TripleO::Controller: puppet/controller.yaml
OS::TripleO::Controller::Net::SoftwareConfig: net-config-bridge.yaml
OS::TripleO::ObjectStorage: puppet/swift-storage.yaml
OS::TripleO::ObjectStorage::Net::SoftwareConfig: net-config-noop.yaml
OS::TripleO::CephStorage: puppet/ceph-storage.yaml
OS::TripleO::CephStorage::Net::SoftwareConfig: net-config-noop.yaml
OS::TripleO::ControllerPostDeployment: puppet/controller-post.yaml
# set to controller-config-pacemaker.yaml to enable pacemaker
OS::TripleO::ControllerConfig: puppet/controller-config.yaml
OS::TripleO::ComputePostDeployment: puppet/compute-post.yaml
OS::TripleO::ObjectStoragePostDeployment: puppet/swift-storage-post.yaml
OS::TripleO::BlockStoragePostDeployment: puppet/cinder-storage-post.yaml
OS::TripleO::CephStoragePostDeployment: puppet/ceph-storage-post.yaml
OS::TripleO::SwiftDevicesAndProxy::SoftwareConfig: puppet/swift-devices-and-proxy-config.yaml
OS::TripleO::CephClusterConfig::SoftwareConfig: puppet/ceph-cluster-config.yaml
OS::TripleO::AllNodes::SoftwareConfig: puppet/all-nodes-config.yaml
OS::TripleO::BootstrapNode::SoftwareConfig: puppet/bootstrap-config.yaml
# Tasks (for internal TripleO usage)
OS::TripleO::Tasks::PackageUpdate: extraconfig/tasks/yum_update.yaml
OS::TripleO::Tasks::ControllerPrePuppet: extraconfig/tasks/noop.yaml
OS::TripleO::Tasks::ControllerPostPuppet: extraconfig/tasks/noop.yaml
# This creates the "heat-admin" user for all OS images by default
# To disable, replace with firstboot/userdata_default.yaml
OS::TripleO::NodeAdminUserData: firstboot/userdata_heat_admin.yaml
# Hooks for operator extra config
# NodeUserData == Cloud-init additional user-data, e.g cloud-config
# ControllerExtraConfigPre == Controller configuration pre service deployment
# NodeExtraConfig == All nodes configuration pre service deployment
# NodeExtraConfigPost == All nodes configuration post service deployment
OS::TripleO::NodeUserData: firstboot/userdata_default.yaml
OS::TripleO::NodeTLSCAData: puppet/extraconfig/tls/no-ca.yaml
OS::TripleO::NodeTLSData: puppet/extraconfig/tls/no-tls.yaml
OS::TripleO::ControllerExtraConfigPre: puppet/extraconfig/pre_deploy/default.yaml
OS::TripleO::ComputeExtraConfigPre: puppet/extraconfig/pre_deploy/default.yaml
OS::TripleO::CephStorageExtraConfigPre: puppet/extraconfig/pre_deploy/default.yaml
OS::TripleO::NodeExtraConfig: puppet/extraconfig/pre_deploy/default.yaml
OS::TripleO::NodeExtraConfigPost: extraconfig/post_deploy/default.yaml
# "AllNodes" Extra cluster config, runs on all nodes prior to the post_deploy
# phase, e.g when puppet is applied, but after the pre_deploy phase. Useful when
# configuration with knowledge of all nodes in the cluster is required vs single
# node configuration in the pre_deploy step.
OS::TripleO::AllNodesExtraConfig: extraconfig/all_nodes/default.yaml
# TripleO overcloud networks
OS::TripleO::Network: network/networks.yaml
OS::TripleO::VipConfig: puppet/vip-config.yaml
OS::TripleO::Network::External: network/noop.yaml
OS::TripleO::Network::InternalApi: network/noop.yaml
OS::TripleO::Network::StorageMgmt: network/noop.yaml
OS::TripleO::Network::Storage: network/noop.yaml
OS::TripleO::Network::Tenant: network/noop.yaml
OS::TripleO::Network::Ports::NetVipMap: network/ports/net_ip_map.yaml
OS::TripleO::Network::Ports::NetIpMap: network/ports/net_ip_map.yaml
OS::TripleO::Network::Ports::NetIpSubnetMap: network/ports/net_ip_subnet_map.yaml
OS::TripleO::Network::Ports::NetIpListMap: network/ports/net_ip_list_map.yaml
# Port assignments for the controller role
OS::TripleO::Controller::Ports::ExternalPort: network/ports/noop.yaml
OS::TripleO::Controller::Ports::InternalApiPort: network/ports/noop.yaml
OS::TripleO::Controller::Ports::StoragePort: network/ports/noop.yaml
OS::TripleO::Controller::Ports::StorageMgmtPort: network/ports/noop.yaml
OS::TripleO::Controller::Ports::TenantPort: network/ports/noop.yaml
# Port assignments for the compute role
OS::TripleO::Compute::Ports::InternalApiPort: network/ports/noop.yaml
OS::TripleO::Compute::Ports::StoragePort: network/ports/noop.yaml
OS::TripleO::Compute::Ports::TenantPort: network/ports/noop.yaml
# Port assignments for the ceph storage role
OS::TripleO::CephStorage::Ports::StoragePort: network/ports/noop.yaml
OS::TripleO::CephStorage::Ports::StorageMgmtPort: network/ports/noop.yaml
# Port assignments for the swift storage role
OS::TripleO::SwiftStorage::Ports::InternalApiPort: network/ports/noop.yaml
OS::TripleO::SwiftStorage::Ports::StoragePort: network/ports/noop.yaml
OS::TripleO::SwiftStorage::Ports::StorageMgmtPort: network/ports/noop.yaml
# Port assignments for the block storage role
OS::TripleO::BlockStorage::Ports::InternalApiPort: network/ports/noop.yaml
OS::TripleO::BlockStorage::Ports::StoragePort: network/ports/noop.yaml
OS::TripleO::BlockStorage::Ports::StorageMgmtPort: network/ports/noop.yaml
# Port assignments for service virtual IPs for the controller role
OS::TripleO::Controller::Ports::RedisVipPort: network/ports/ctlplane_vip.yaml
# Service Endpoint Mappings
OS::TripleO::Endpoint: network/endpoints/endpoint.yaml
OS::TripleO::EndpointMap: network/endpoints/endpoint_map.yaml
# validation resources
OS::TripleO::AllNodes::Validation: all-nodes-validation.yaml
parameter_defaults:
EnablePackageInstall: false
View Git Blame Copy Permalink