RETIRED, Heat templates for deploying OpenStack
Go to file
Dan Sneddon 321e605a0a Add IPv6 Support to Isolated Networks
This change adds a new set of network templates with IPv6 subnets
that can be used instead of the existing IPv4 networks. Each network
can use either the IPv4 or IPv6 template, and the Neutron subnet will
be created with the specified IP version.

The default addresses used for the IPv6 networks use the fd00::/8
prefix for the internal isolated networks (this range is reserved
for private use similar to 10.0.0.0/8), and 2001:db8:fd00:1000::/64
is used as an example default for the External network
(2001:db8::/32 are the documentation addresses [RFC3849]), but this
would ordinarily be a globally addressable subnet. These
parameters may be overridden in an environment file.

This change will require updates to the OpenStack Puppet
Modules to support IPv6 addresses in some of the hieradata values.
Many of the OPM modules already have IPv6 support to support IPv6
deployments in Packstack, but some OPM packages that apply only to
Instack/TripleO deployments need to be updated.

IPv6 addresses used in URLs need to be surrounded by brackets in
order to differentiate IP address from port number. This change
adds a new output to the network/ports resources for
ip_address_uri, which is an IP address with brackets in the case
of IPv6, and a raw IP address without brackets for IPv4 ports.
This change also updates some URLs which are constructed in Heat.

This has been tested and problems were found with Puppet not
accepting IPv6 addresses. This is addressed in the latest Puppet.
Additional changes were required to make this work with Ceph.

IPv6 tunnel endpoints with Open vSwitch are not yet supported
(although support is coming soon), so this review leaves the
Tenant network as an isolated IPv4 network for the time being.

Change-Id: Ie7a742bdf1db533edda2998a53d28528f80ef8e2
2016-03-04 14:34:59 +01:00
docker Merge "Remove DNS hack." 2016-02-16 11:13:40 +00:00
environments Add IPv6 Support to Isolated Networks 2016-03-04 14:34:59 +01:00
extraconfig Merge "Deploy Aodh services, replacing Ceilometer Alarm" 2016-03-03 20:40:03 +00:00
firstboot Update typos 2015-11-24 19:20:35 +05:30
network Add IPv6 Support to Isolated Networks 2016-03-04 14:34:59 +01:00
puppet Add IPv6 Support to Isolated Networks 2016-03-04 14:34:59 +01:00
tools Update yaml-validate.py to accept files or directories 2016-01-28 19:04:25 +00:00
validation-scripts Use set -e for validation-scripts/all-nodes.sh 2016-02-29 08:18:14 -05:00
.gitignore Rename overcloud-without-mergepy to overcloud. 2015-12-03 16:01:33 -05:00
.gitreview Update stackforge references to openstack 2013-08-17 22:57:57 -04:00
Gemfile Add Puppet 4.x lint checks 2015-11-05 15:44:18 +01:00
LICENSE Add license file 2014-01-20 11:58:20 +01:00
MANIFEST.in Add release configuration. 2013-10-22 17:49:35 +01:00
README.rst Drop os-apply-config. No longer maintained. 2015-12-03 16:01:41 -05:00
Rakefile Make puppet manifests compliant with Puppet 4.x 2015-11-05 15:52:28 +01:00
all-nodes-validation.yaml network validation to ping test each interface 2015-07-24 16:36:57 -04:00
babel.cfg Add release configuration. 2013-10-22 17:49:35 +01:00
bootstrap-config.yaml Remove NO_SIGNAL from ControllerBootstrapNodeDeployment 2015-06-03 16:30:53 +02:00
capabilities-map.yaml Update the path to the Docker file 2016-02-15 12:51:47 +00:00
net-config-bond.yaml Add Management Network For System Administration. 2015-12-18 13:05:54 -06:00
net-config-bridge.yaml Add Management Network For System Administration. 2015-12-18 13:05:54 -06:00
net-config-linux-bridge.yaml Adding ManagementIpSubnet to linux bridge net conf 2016-01-05 10:38:15 +00:00
net-config-noop.yaml Add Management Network For System Administration. 2015-12-18 13:05:54 -06:00
net-config-static-bridge.yaml Add DnsServers param to network config templates 2015-09-30 17:05:37 -04:00
overcloud-resource-registry-puppet.yaml Merge "Introduce update/upgrade workflow" 2016-02-25 11:00:49 +00:00
overcloud-without-mergepy.yaml Rename overcloud-without-mergepy to overcloud. 2015-12-03 16:01:33 -05:00
overcloud.yaml Add IPv6 Support to Isolated Networks 2016-03-04 14:34:59 +01:00
requirements.txt Add release configuration. 2013-10-22 17:49:35 +01:00
setup.cfg Drop deprecated templates/Makefile/merge.py 2015-11-25 15:00:13 -05:00
setup.py Add release configuration. 2013-10-22 17:49:35 +01:00
test-requirements.txt Add release configuration. 2013-10-22 17:49:35 +01:00
tox.ini Rename tox env to pep8 2016-02-11 12:29:36 -06:00

README.rst

tripleo-heat-templates

Heat templates to deploy OpenStack using OpenStack.

Features

The ability to deploy a multi-node, role based OpenStack deployment using OpenStack Heat. Notable features include:

  • Choice of deployment/configuration tooling: puppet, (soon) docker
  • Role based deployment: roles for the controller, compute, ceph, swift, and cinder storage
  • physical network configuration: support for isolated networks, bonding, and standard ctlplane networking

Directories

A description of the directory layout in TripleO Heat Templates.

  • environments: contains heat environment files that can be used with -e

    on the command like to enable features, etc.

  • extraconfig: templates used to enable 'extra' functionality. Includes

    functionality for distro specific registration and upgrades.

  • firstboot: example first_boot scripts that can be used when initially

    creating instances.

  • network: heat templates to help create isolated networks and ports
  • puppet: templates mostly driven by configuration with puppet. To use these

    templates you can use the overcloud-resource-registry-puppet.yaml.

  • validation-scripts: validation scripts useful to all deployment

    configurations