tripleo-heat-templates/environments/designate-config-ha.yaml
Ben Nemec 3abb38ae14 Split designate envs
Because the designate parameters will always need to be edited for
a deployment, a copy of the environment must be made.  However,
because there were resource_registry entries in the previous
enable-designate environments those relative paths would become
invalid if the file was moved.  Splitting the resource_registry
entries from the user-configured parameters should eliminate this
problem.

Change-Id: I8817a36e20e7a75b340a0d6cb0abf09e57b1fd63
2018-10-11 15:15:16 +00:00

128 lines
4.6 KiB
YAML

# *******************************************************************
# This file was created automatically by the sample environment
# generator. Developers should use `tox -e genconfig` to update it.
# Users are recommended to make changes to a copy of the file instead
# of the original, if any customizations are needed.
# *******************************************************************
# title: Configure Designate Parameters for HA
# description: |
# Sample configuration parameters for Designate that are appropriate
# for an HA deployment. Requires the enable-designate environment.
parameter_defaults:
# The content for Designate's pools.yaml
# Mandatory. This parameter must be set by the user.
# Type: string
DesignatePools: |
- name: default
# The name is immutable. There will be no option to change the name after
# creation and the only way will to change it will be to delete it
# (and all zones associated with it) and recreate it.
description: Default Pool
attributes: {}
# List out the NS records for zones hosted within this pool
# This should be a record that is created outside of designate, that
# points to the public IP of the controller node.
ns_records:
- hostname: ns1-1.example.org.
priority: 1
- hostname: ns1-2.example.org.
priority: 2
- hostname: ns1-3.example.org.
priority: 3
# List out the nameservers for this pool. These are the actual BIND servers.
# We use these to verify changes have propagated to all nameservers.
nameservers:
- host: 10.0.0.51
port: 53
- host: 10.0.0.52
port: 53
- host: 10.0.0.53
port: 53
# List out the targets for this pool. For BIND there will be one
# entry for each BIND server, as we have to run rndc command on each server
targets:
- type: bind9
description: BIND9 Server 1
# List out the designate-mdns servers from which BIND servers should
# request zone transfers (AXFRs) from.
# This should be the IP of the controller node.
# If you have multiple controllers you can add multiple masters
# by running designate-mdns on them, and adding them here.
masters:
- host: 10.0.0.51
port: 5354
- host: 10.0.0.52
port: 5354
- host: 10.0.0.53
port: 5354
# BIND Configuration options
options:
host: 10.0.0.51
port: 53
rndc_host: 172.17.0.251
rndc_port: 953
rndc_key_file: /etc/rndc.key
- type: bind9
description: BIND9 Server 2
# List out the designate-mdns servers from which BIND servers should
# request zone transfers (AXFRs) from.
# This should be the IP of the controller node.
# If you have multiple controllers you can add multiple masters
# by running designate-mdns on them, and adding them here.
masters:
- host: 10.0.0.51
port: 5354
- host: 10.0.0.52
port: 5354
- host: 10.0.0.53
port: 5354
# BIND Configuration options
options:
host: 10.0.0.52
port: 53
rndc_host: 172.17.0.252
rndc_port: 953
rndc_key_file: /etc/rndc.key
- type: bind9
description: BIND9 Server 3
# List out the designate-mdns servers from which BIND servers should
# request zone transfers (AXFRs) from.
# This should be the IP of the controller node.
# If you have multiple controllers you can add multiple masters
# by running designate-mdns on them, and adding them here.
masters:
- host: 10.0.0.51
port: 5354
- host: 10.0.0.52
port: 5354
- host: 10.0.0.53
port: 5354
# BIND Configuration options
options:
host: 10.0.0.53
port: 53
rndc_host: 172.17.0.253
rndc_port: 953
rndc_key_file: /etc/rndc.key
# If True, enable the internal Neutron DNS server that provides name
# resolution between VMs. This parameter has no effect if
# NeutronDhcpAgentDnsmasqDnsServers is set.
# Type: boolean
NeutronEnableInternalDNS: True
# Comma-separated list of extensions enabled for the Neutron plugin.
# Type: comma_delimited_list
NeutronPluginExtensions: qos,port_security,dns