tripleo-heat-templates/net-config-noop.j2.yaml
Rabi Mishra 0d51947872 Network config with ansible for ci jobs using multi-nics
OVB jobs use a different multi-nic nic config. Generate that with
ansible.

Depends-On: https://review.opendev.org/754491
Change-Id: I5ea2615e773ee7656e85f172695ad08cd0312c56
2020-10-02 12:23:17 +05:30

83 lines
2.9 KiB
YAML

heat_template_version: rocky
description: >
Software Config to no-op for os-net-config. Using this will allow you
to use the parameter driven (init-neutron-ovs) configuration instead.
parameters:
ControlPlaneIp:
default: ''
description: IP address/subnet on the ctlplane network
type: string
ControlPlaneSubnetCidr:
default: ''
description: >
The subnet CIDR of the control plane network. (The parameter is
automatically resolved from the ctlplane subnet's cidr attribute.)
type: string
ControlPlaneDefaultRoute:
default: ''
description: The default route of the control plane network. (The parameter
is automatically resolved from the ctlplane subnet's gateway_ip attribute.)
type: string
ControlPlaneStaticRoutes:
default: []
description: >
Routes for the ctlplane network traffic.
JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
Unless the default is changed, the parameter is automatically resolved
from the subnet host_routes attribute.
type: json
ControlPlaneMtu:
default: 1500
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the network.
(The parameter is automatically resolved from the ctlplane network's mtu attribute.)
type: number
DnsServers: # Override this via parameter_defaults
default: []
description: >
DNS servers to use for the Overcloud (2 max for some implementations).
If not set the nameservers configured in the ctlplane subnet's
dns_nameservers attribute will be used.
type: comma_delimited_list
{%- for network in networks %}
{{network.name}}IpSubnet:
default: ''
description: IP address/subnet on the {{network.name_lower}} network
type: string
{{network.name}}InterfaceRoutes:
default: []
description: >
Routes for the {{network.name_lower}} network traffic.
JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
Unless the default is changed, the parameter is automatically resolved
from the subnet host_routes attribute.
type: json
{{network.name}}Mtu:
default: {{network.mtu|default('1500')}}
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the
{{network.name}} network.
type: number
{{network.name}}InterfaceDefaultRoute:
default: ''
description: default route for the {{network.name_lower}} network
type: string
{{network.name}}NetworkVlanID:
default: {{network.vlan|default(1)}}
description: Vlan ID for the {{network.name_lower}} network traffic.
type: number
{%- endfor %}
resources:
OsNetConfigImpl:
type: OS::Heat::Value
properties:
value: {}
outputs:
config:
description: The OsNetConfigImpl resource.
value: {get_attr: [OsNetConfigImpl, value]}