tripleo-heat-templates/net-config-bond.j2.yaml
Harald Jensås 7a52a6986e Drop EC2MetadataIp parameter and its uses
Since https://review.opendev.org/656581 is merged (and the revert,
reverting the revert ...) there is no metadata service running.

This change removes all things related to setting up routes
to the metadata service, i.e the EC2MetadataIp. As well as NAT
firewall redirect rule used only on the undercloud but disabled
by default.

Blueprint: nova-less-deploy
Change-Id: Ic4ea74b45c566048e32dde82d2bf00498f932af6
2019-07-05 14:05:59 +02:00

110 lines
4.0 KiB
YAML

heat_template_version: rocky
description: >
Software Config to drive os-net-config with 2 bonded nics on a bridge.
parameters:
BondInterfaceOvsOptions:
default: ''
description: The ovs_options or bonding_options string for the bond
interface. Set things like lacp=active and/or bond_mode=balance-slb
for OVS bonds or like mode=4 for Linux bonds using this option.
type: string
constraints:
- allowed_pattern: ^((?!balance.tcp).)*$
description: The balance-tcp bond mode is known to cause packet loss and
should not be used in BondInterfaceOvsOptions.
ControlPlaneIp:
default: ''
description: IP address/subnet on the ctlplane network
type: string
ControlPlaneSubnetCidr:
default: ''
description: >
The subnet CIDR of the control plane network. (The parameter is
automatically resolved from the ctlplane subnet's cidr attribute.)
type: string
ControlPlaneDefaultRoute:
default: ''
description: The default route of the control plane network. (The parameter
is automatically resolved from the ctlplane subnet's gateway_ip attribute.)
type: string
ControlPlaneStaticRoutes:
default: []
description: >
Routes for the ctlplane network traffic.
JSON route e.g. [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
Unless the default is changed, the parameter is automatically resolved
from the subnet host_routes attribute.
type: json
ControlPlaneMtu:
default: 1500
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the network.
(The parameter is automatically resolved from the ctlplane network's mtu attribute.)
type: number
DnsServers: # Override this via parameter_defaults
default: []
description: >
DNS servers to use for the Overcloud (2 max for some implementations).
If not set the nameservers configured in the ctlplane subnet's
dns_nameservers attribute will be used.
type: comma_delimited_list
DnsSearchDomains: # Override this via parameter_defaults
default: []
description: A list of DNS search domains to be added (in order) to resolv.conf.
type: comma_delimited_list
{%- for network in networks %}
{{network.name}}IpSubnet:
default: ''
description: IP address/subnet on the {{network.name_lower}} network
type: string
{{network.name}}Mtu:
default: {{network.mtu|default('1500')}}
description: The maximum transmission unit (MTU) size(in bytes) that is
guaranteed to pass through the data path of the segments in the
{{network.name}} network.
type: number
{{network.name}}InterfaceDefaultRoute:
default: ''
description: default route for the {{network.name_lower}} network
type: string
{{network.name}}NetworkVlanID:
default: {{network.vlan|default(1)}}
description: Vlan ID for the {{network.name_lower}} network traffic.
type: number
{%- endfor %}
resources:
OsNetConfigImpl:
type: OS::Heat::SoftwareConfig
properties:
group: script
config:
str_replace:
template:
get_file: network/scripts/run-os-net-config.sh
params:
$network_config:
network_config:
- type: ovs_bridge
name: bridge_name
use_dhcp: true
dns_servers:
get_param: DnsServers
domain:
get_param: DnsSearchDomains
members:
- type: ovs_bond
name: bond1
use_dhcp: true
ovs_options:
get_param: BondInterfaceOvsOptions
members:
- type: interface
name: nic1
- type: interface
name: nic2
outputs:
OS::stack_id:
description: The OsNetConfigImpl resource.
value:
get_resource: OsNetConfigImpl