91985cfbce
Render composable network L3 routed subnets in network-environment yaml files. Partial: blueprint tripleo-routed-networks-templates Change-Id: I4ba234ede5b7f243ba41e8fec8f78e1f1cc261c8
188 lines
8.7 KiB
YAML
188 lines
8.7 KiB
YAML
# List of networks, used for j2 templating of routed networks
|
|
#
|
|
# Supported values:
|
|
#
|
|
# name: Name of the network (mandatory)
|
|
# name_lower: lowercase version of name used for filenames
|
|
# (optional, defaults to name.lower())
|
|
# service_net_map_replace: if name_lower is set to a custom name this should be set
|
|
# to original default (optional). This field is only necessary when
|
|
# changing the default network names, not when adding a new custom network.
|
|
# enabled: Is the network enabled (optional, defaults to true)
|
|
# NOTE: False will use noop.yaml for unused legacy networks to support upgrades.
|
|
# vlan: vlan for the network (optional)
|
|
# vip: Enable creation of a virtual IP on this network
|
|
# ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' or '2001:db8:fd00:1000::/64'
|
|
# (optional, may use parameter defaults instead)
|
|
# allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250'}]
|
|
# gateway_ip: gateway for the network (optional, may use parameter defaults)
|
|
# routes: Optional, list of networks that should be routed via network gateway.
|
|
# Example: [{'destination':'10.0.0.0/16', 'nexthop':'10.0.0.1'}]
|
|
# A single /16 supernet route could be used for 255 smaller /24 subnets.
|
|
# ipv6_subnet: Optional, sets default IPv6 subnet if IPv4 is already defined.
|
|
# ipv6_allocation_pools: Set default IPv6 allocation pools if IPv4 allocation pools
|
|
# are already defined.
|
|
# ipv6_gateway: Set an IPv6 gateway if IPv4 gateway already defined.
|
|
# routes_ipv6: Optional, list of networks that should be routed via network gateway.
|
|
# Example: [{'destination':'fd00:fd00:fd00:3004::/64',
|
|
# 'nexthop':'fd00:fd00:fd00:3000::1'}]
|
|
# ipv6: If ip_subnet not defined, this specifies that the network is IPv6-only.
|
|
# NOTE: IP-related values set parameter defaults in templates, may be overridden,
|
|
# either by operators, or e.g in environments/network-isolation-v6.yaml where we
|
|
# set some default IPv6 addresses.
|
|
# compat_name: for existing stack you may need to override the default
|
|
# transformation for the resource's name.
|
|
# subnets: A map of additional subnets for the network (optional). The map
|
|
# takes the following format:
|
|
# {'<subnet name>': {'enabled': '<true|false>',
|
|
# 'vlan': '<vlan-id>',
|
|
# 'ip_subnet': '<IP/CIDR>',
|
|
# 'allocation_pools': '<IP range list>',
|
|
# 'gateway_ip': '<gateway IP>',
|
|
# 'routes': '<Routes list>',
|
|
# 'ipv6_subnet': '<IPv6/CIDR>',
|
|
# 'ipv6_allocation_pools': '<IPv6 range list>',
|
|
# 'gateway_ipv6': '<IPv6 gateway>',
|
|
# 'routes_ipv6': '<Routes list>'}}
|
|
#
|
|
# Example:
|
|
# - name Example
|
|
# vip: false
|
|
# ip_subnet: '10.0.2.0/24'
|
|
# allocation_pools: [{'start': '10.0.2.4', 'end': '10.0.2.250'}]
|
|
# gateway_ip: '10.0.2.254'
|
|
# subnets:
|
|
# example_siteB_rack1:
|
|
# vlan: 11
|
|
# ip_subnet: '172.16.1.64/26'
|
|
# allocation_pools: [{'start': '172.16.1.70', 'end': '172.16.1.110'}]
|
|
# gateway_ip: '172.16.1.65'
|
|
#
|
|
# To support backward compatility, two versions of the network definitions will
|
|
# be created, network/<network>.yaml and network/<network>_v6.yaml. Only
|
|
# one of these files may be used in the deployment at a time, since the
|
|
# parameters used for configuration are the same in both files. In the
|
|
# future, this behavior may be changed to create only one file for custom
|
|
# networks. You may specify IPv6 addresses for ip_subnet, allocation_pools,
|
|
# and gateway_ip if no IPv4 addresses are used for a custom network, or set
|
|
# ipv6: true, and the network/<network>.yaml file will be configured as IPv6.
|
|
#
|
|
# For configuring both IPv4 and IPv6 on the same interface, use two separate
|
|
# networks, and then assign both IPs to the same interface in a custom NIC
|
|
# configuration templates.
|
|
#
|
|
# The ordering of the networks below will determine the order in which NICs
|
|
# are assigned in the network/config/multiple-nics templates, beginning with
|
|
# NIC2, Control Plane is always NIC1.
|
|
|
|
- name: External
|
|
vip: true
|
|
name_lower: external
|
|
vlan: 100
|
|
ip_subnet: '10.0.0.0/24'
|
|
allocation_pools: [{'start': '10.0.0.4', 'end': '10.0.0.250'}]
|
|
gateway_ip: '10.0.0.1'
|
|
ipv6_subnet: '2001:db8:fd00:1000::/64'
|
|
ipv6_allocation_pools: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: '2001:db8:fd00:1000::1'
|
|
- name: InternalApi
|
|
name_lower: internal_api
|
|
vip: true
|
|
vlan: 10
|
|
ip_subnet: '172.17.0.0/24'
|
|
allocation_pools: [{'start': '172.17.0.10', 'end': '172.17.0.250'}]
|
|
gateway_ip: '172.17.0.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:1000::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:1000::10', 'end': 'fd00:fd00:fd00:1000:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:1000::1'
|
|
subnets:
|
|
internal_api_leaf1:
|
|
vlan: 11
|
|
ip_subnet: '172.17.1.0/24'
|
|
allocation_pools: [{'start': '172.17.1.10', 'end': '172.17.1.250'}]
|
|
gateway_ip: '172.17.1.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:1001::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:1001::10', 'end': 'fd00:fd00:fd00:1001:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:1001::1'
|
|
- name: Storage
|
|
vip: true
|
|
vlan: 20
|
|
name_lower: storage
|
|
ip_subnet: '172.18.0.0/24'
|
|
allocation_pools: [{'start': '172.18.0.10', 'end': '172.18.0.250'}]
|
|
gateway_ip: '172.18.0.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:2000::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:2000::1'
|
|
subnets:
|
|
storage_leaf1:
|
|
vlan: 21
|
|
ip_subnet: '172.18.1.0/24'
|
|
allocation_pools: [{'start': '172.18.1.10', 'end': '172.18.1.250'}]
|
|
gateway_ip: '172.18.1.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:2001::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2001::10', 'end': 'fd00:fd00:fd00:2001:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:2001::1'
|
|
- name: StorageMgmt
|
|
name_lower: storage_mgmt
|
|
vip: true
|
|
vlan: 30
|
|
ip_subnet: '172.19.0.0/24'
|
|
allocation_pools: [{'start': '172.19.0.10', 'end': '172.19.0.250'}]
|
|
gateway_ip: '172.19.0.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:3000::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:3000::1'
|
|
subnets:
|
|
storage_mgmt_leaf1:
|
|
vlan: 31
|
|
ip_subnet: '172.19.1.0/24'
|
|
allocation_pools: [{'start': '172.19.1.10', 'end': '172.19.1.250'}]
|
|
gateway_ip: '172.19.1.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:3001::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3001::10', 'end': 'fd00:fd00:fd00:3001:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:3001::1'
|
|
- name: Tenant
|
|
vip: false # Tenant network does not use VIPs
|
|
name_lower: tenant
|
|
vlan: 40
|
|
ip_subnet: '172.16.0.0/24'
|
|
allocation_pools: [{'start': '172.16.0.10', 'end': '172.16.0.250'}]
|
|
gateway_ip: '172.16.0.254'
|
|
# Note that tenant tunneling is only compatible with IPv4 addressing at this time.
|
|
ipv6_subnet: 'fd00:fd00:fd00:4000::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:4000::1'
|
|
subnets:
|
|
tenant_leaf1:
|
|
vlan: 41
|
|
ip_subnet: '172.16.1.0/24'
|
|
allocation_pools: [{'start': '172.16.1.10', 'end': '172.16.1.250'}]
|
|
gateway_ip: '172.16.1.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:4001::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4001::10', 'end': 'fd00:fd00:fd00:4001:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:4001::1'
|
|
- name: Management
|
|
# Management network is enabled by default for backwards-compatibility, but
|
|
# is not included in any roles by default. Add to role definitions to use.
|
|
enabled: true
|
|
vip: false # Management network does not use VIPs
|
|
name_lower: management
|
|
vlan: 50
|
|
ip_subnet: '172.20.0.0/24'
|
|
allocation_pools: [{'start': '172.20.0.10', 'end': '172.20.0.250'}]
|
|
gateway_ip: '172.20.0.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:5000::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5000::10', 'end': 'fd00:fd00:fd00:5000:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:5000::1'
|
|
subnets:
|
|
management_leaf1:
|
|
enabled: true
|
|
vlan: 51
|
|
ip_subnet: '172.20.1.0/24'
|
|
allocation_pools: [{'start': '172.20.1.10', 'end': '172.20.1.250'}]
|
|
gateway_ip: '172.20.1.254'
|
|
ipv6_subnet: 'fd00:fd00:fd00:5001::/64'
|
|
ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5001::10', 'end': 'fd00:fd00:fd00:5001:ffff:ffff:ffff:fffe'}]
|
|
gateway_ipv6: 'fd00:fd00:fd00:5001::1'
|