Correct how the image_serve validation works

It now detects the correct vhost name directly in the httpd
configuration, allowing to avoid some "404" in case we use the IP
directly.

Change-Id: Ieee084c8f232e9bd66abae5596ce69986642f718
(cherry picked from commit cb3658c816)

ansible-role-requirements.yml

@@ -0,0 +1,21 @@
+---
+# Copyright 2019 Red Hat, Inc.
+# All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+- name: tripleo-ansible
+  scm: git
+  src: https://opendev.org/openstack/tripleo-ansible
+  version: master
+  trackbranch: master

roles/image_serve/defaults/main.yaml

@@ -1,2 +1,3 @@
 ---
 container_registry_port: 8787
+container_registry_httpd_config: "/etc/httpd/conf.d/image-serve.conf"

roles/image_serve/molecule/default/converge.yml

@@ -35,8 +35,28 @@
           debug:
             msg: "Detected faulty port!"
 
+    - name: Run validation for wrong config file
+      block:
+        - name: Run validation for wrong config file
+          include_role:
+            name: image_serve
+          vars:
+            container_registry_httpd_config: /fake-image-serve.conf
+      rescue:
+        - name: Clear host errors
+          meta: clear_host_errors
+
+        - name: Status message
+          debug:
+            msg: "Detected wrong config file!"
+
     - name: Ensure we detect faulty tree
       block:
+        - name: Stopping httpd
+          systemd:
+            name: httpd
+            state: stopped
+
         - name: run validation for 404
           include_role:
             name: image_serve

roles/image_serve/molecule/default/molecule.yml

@@ -7,9 +7,12 @@ log: true
 platforms:
   - name: centos7
     hostname: centos7
+    etc_hosts:
+      undercloud.ctlplane.mydomain.tld: "127.0.0.1"
     image: centos:7
     override_command: true
-    command: python -m SimpleHTTPServer 8787
+    command: /sbin/init
+    privileged: true
     pkg_extras: python-setuptools python-enum34 python-netaddr epel-release ruby PyYAML
     volumes:
       - /etc/ci/mirror_info.sh:/etc/ci/mirror_info.sh:ro
@@ -21,9 +24,12 @@ platforms:
 
   - name: centos8
     hostname: centos8
+    etc_hosts:
+      undercloud.ctlplane.mydomain.tld: "127.0.0.1"
     image: centos:8
     override_command: true
-    command: python3 -m http.server 8787
+    command: /sbin/init
+    privileged: true
     pkg_extras: python*-setuptools python*-enum34 python*-netaddr ruby epel-release python*-PyYAML
     volumes:
       - /etc/ci/mirror_info.sh:/etc/ci/mirror_info.sh:ro
@@ -35,7 +41,8 @@ provisioner:
   log: true
   env:
     ANSIBLE_STDOUT_CALLBACK: yaml
-    ANSIBLE_LIBRARY: "../../../../library"
+    ANSIBLE_LIBRARY: ../../../../library
+    ANSIBLE_ROLES_PATH: ../../../../roles/roles.galaxy/tripleo-ansible/tripleo-ansible/tripleo_ansible/roles
 
 scenario:
   test_sequence:

roles/image_serve/molecule/default/prepare.yml

@@ -17,38 +17,9 @@
 
 - name: Prepare
   hosts: all
-  gather_facts: false
-
   tasks:
-    - name: install hiera
-      package:
-        name: hiera
-
-    - name: create hiera tree
-      file:
-        path: /etc/puppet
-        state: directory
-
-    - name: populate hiera.yaml
-      copy:
-        dest: /etc/puppet/hiera.yaml
-        content: |
-          :backends:
-            - yaml
-          :yaml:
-            :datadir: "/etc/puppet/"
-          :hierarchy:
-            - "common"
-
-    - name: populate hiera content
-      copy:
-        dest: /etc/puppet/common.yaml
-        content: |
-          tripleo_undercloud_conf_file: /undercloud.conf
-
-    - name: populate undercloud.conf
-      copy:
-        dest: /undercloud.conf
-        content: |
-          [DEFAULT]
-          local_ip = 127.0.0.1
+    - name: Container registry installation
+      include_role:
+        name: tripleo_image_serve
+      vars:
+        tripleo_container_registry_host: undercloud.ctlplane.mydomain.tld

roles/image_serve/tasks/main.yaml

@@ -1,33 +1,29 @@
 ---
-- name: Get the path of tripleo undercloud config file
-  become: true
-  hiera:
-    name: "tripleo_undercloud_conf_file"
+- name: Ensure we have the httpd config
+  stat:
+    path: "{{ container_registry_httpd_config }}"
+  register: registry_config
 
-- name: Get local_ip value from the undercloud.conf file
-  become: true
-  validations_read_ini:
-    path: "{{ tripleo_undercloud_conf_file }}"
-    section: DEFAULT
-    key: local_ip
-    ignore_missing_file: true
-  register: local_ip
+- name: Fail early if no httpd config is present
+  when: not registry_config.stat.exists
+  fail:
+    msg: "Unable to find vhost config {{ container_registry_httpd_config }}. Exiting now."
 
-- name: Set container registry host
-  set_fact:
-    container_registry_host: >-
-      {{ local_ip.value|default('0.0.0.0', true)|ipaddr('address') }}
+- name: Extract vhost name from httpd config
+  command: |
+    awk -F '[ >:]*' '/VirtualHost/ {print $2; exit}' {{ container_registry_httpd_config }}
+  register: virthost_name
 
 - name: Ensure port is open
   wait_for:
     port: "{{ container_registry_port }}"
-    host: "{{ container_registry_host }}"
+    host: "{{ virthost_name.stdout }}"
     timeout: 10
 
 - name: Ensure registry does answer
   uri:
     method: HEAD
-    url: "http://{{ container_registry_host }}:{{ container_registry_port }}/v2/index.json"
+    url: "http://{{ virthost_name.stdout }}:{{ container_registry_port }}/v2/index.json"
     status_code:
       - 200
       - 204

zuul.d/playbooks/pre.yml

@@ -28,5 +28,15 @@
         requirements: "{{ ansible_user_dir }}/{{ zuul.project.src_dir }}/molecule-requirements.txt"
         virtualenv: "{{ ansible_user_dir }}/test-python"
         virtualenv_site_packages: true
+
+  tasks:
+    - name: Get Ansible Galaxy roles
+      command: >-
+        {{ ansible_user_dir }}/test-python/bin/ansible-galaxy install
+        -fr
+        {{ ansible_user_dir }}/{{ zuul.project.src_dir }}/ansible-role-requirements.yml
+      environment:
+        ANSIBLE_ROLES_PATH: "{{ ansible_user_dir }}/{{ zuul.project.src_dir }}/roles/roles.galaxy"
+
   roles:
     - role: ensure-docker

zuul.d/playbooks/run.yml

@@ -3,17 +3,32 @@
 - hosts: all
   environment:
     ANSIBLE_LOG_PATH: "{{ ansible_user_dir }}/zuul-output/logs/ansible-execution.log"
+  pre_tasks:
+
+    - name: Set project path fact
+      set_fact:
+        tripleo_validations_project_path: "{{ ansible_user_dir }}/{{ zuul.projects['opendev.org/openstack/tripleo-validations'].src_dir }}"
+
+    - name: Set role path fact
+      set_fact:
+        tripleo_validations_roles_paths:
+          - "{{ tripleo_validations_project_path }}/roles/roles.galaxy/tripleo-ansible/tripleo_ansible/roles"
+          - "{{ tripleo_validations_project_path }}/roles/roles.galaxy/tripleo-ansible/tripleo-ansible/tripleo_ansible/roles"
+          - "{{ tripleo_validations_project_path }}/roles"
+          - "/usr/share/ansible/roles"
+
   tasks:
     - name: Run role test job
       shell: |-
         . {{ ansible_user_dir }}/test-python/bin/activate
-        . {{ ansible_user_dir }}/{{ zuul.project.src_dir }}/ansible-test-env.rc
+        . {{ tripleo_validations_project_path }}/ansible-test-env.rc
         pytest --color=no \
                --html={{ ansible_user_dir }}/zuul-output/logs/reports.html \
                --self-contained-html \
                --ansible-args='{{ tripleo_job_ansible_args | default("") }}' \
-               {{ ansible_user_dir }}/{{ zuul.project.src_dir }}/tests/test_molecule.py
+               {{ tripleo_validations_project_path }}/tests/test_molecule.py
       args:
-        chdir: "{{ ansible_user_dir }}/{{ zuul.project.src_dir }}/roles/{{ tripleo_validations_role_name }}"
+        chdir: "{{ tripleo_validations_project_path }}/roles/{{ tripleo_validations_role_name }}"
         executable: /bin/bash
-      changed_when: false
+      environment:
+        ANSIBLE_ROLE_PATH: "{{ tripleo_validations_roles_paths | join(':') }}"