Adapt watcher documentation for new standards

This patch set makes the following changes:

 * Add index file to each subdirectory of doc/source
 * Update doc/source/index.rst with new links
 * Move content of install-guide to the doc/source/install
 * Minor changes

Depends-On: Ifc5512c0e2373cf3387e0e0498268eab092e52bb
Change-Id: Iecb4f60efb015a56b9b37331859848b287112842

doc/source/admin/index.rst

@@ -0,0 +1,10 @@
+.. toctree::
+   :maxdepth: 2
+
+   apache-mod-wsgi
+   conf-files
+   configuration
+   gmr
+   policy
+   ways-to-install
+   ../strategies/index

doc/source/admin/ways-to-install.rst

@@ -4,12 +4,13 @@
 
           https://creativecommons.org/licenses/by/3.0/
 
-==================
-Installing Watcher
-==================
+=======================
+Ways to install Watcher
+=======================
 
-This document describes how to install Watcher in order to use it. If you are
-intending to develop on or with Watcher, please read :doc:`../dev/environment`.
+This document describes some ways to install Watcher in order to use it.
+If you are intending to develop on or with Watcher,
+please read :doc:`../dev/environment`.
 
 Prerequisites
 -------------

doc/source/contributor/index.rst

@@ -0,0 +1,8 @@
+.. toctree::
+   :maxdepth: 1
+
+  environment
+  devstack
+  notifications
+  testing
+  rally_link

doc/source/contributor/plugin/index.rst

@@ -0,0 +1,11 @@
+.. toctree::
+   :maxdepth: 1
+
+   base-setup
+   action-plugin
+   cdmc-plugin
+   goal-plugin
+   planner-plugin
+   scoring-engine-plugin
+   strategy-plugin
+   plugins

doc/source/index.rst

@@ -43,7 +43,7 @@ Introduction
 
   glossary
   architecture
-  dev/contributing
+  contributor/contributing
 
 
 Getting Started
@@ -52,14 +52,14 @@ Getting Started
 .. toctree::
   :maxdepth: 1
 
-  dev/environment
-  dev/devstack
-  deploy/configuration
-  deploy/conf-files
-  deploy/apache-mod-wsgi
-  dev/notifications
-  dev/testing
-  dev/rally_link
+  contributor/index
+
+Installation
+------------
+.. toctree::
+  :maxdepth: 2
+
+  install/index
 
 API References
 --------------
@@ -67,7 +67,7 @@ API References
 .. toctree::
   :maxdepth: 1
 
-  webapi/v1
+  webapi/index
 
 Plugins
 -------
@@ -75,30 +75,23 @@ Plugins
 .. toctree::
   :maxdepth: 1
 
-  dev/plugin/base-setup
-  dev/plugin/goal-plugin
-  dev/plugin/scoring-engine-plugin
-  dev/plugin/strategy-plugin
-  dev/plugin/cdmc-plugin
-  dev/plugin/action-plugin
-  dev/plugin/planner-plugin
-  dev/plugins
-
+  contributor/plugin/index
 
 Admin Guide
 ===========
 
-Introduction
-------------
-
 .. toctree::
   :maxdepth: 1
 
-  deploy/installation
-  deploy/user-guide
-  deploy/policy
-  deploy/gmr
-  strategies/strategies
+  admin/index
+
+User Guide
+==========
+
+.. toctree::
+  :maxdepth: 2
+
+  user/index
 
 Watcher Manual Pages
 ====================
@@ -107,7 +100,7 @@ Watcher Manual Pages
    :glob:
    :maxdepth: 1
 
-   man/*
+   man/index
 
 .. # NOTE(mriedem): This is the section where we hide things that we don't
    # actually want in the table of contents but sphinx build would fail if

doc/source/install/common_prerequisites.rst

@@ -15,13 +15,13 @@ you must create a database, service credentials, and API endpoints.
 
    * Create the ``watcher`` database:
 
-     .. code-block:: none
+     .. code-block:: console
 
         CREATE DATABASE watcher CHARACTER SET utf8;
 
    * Grant proper access to the ``watcher`` database:
 
-     .. code-block:: none
+     .. code-block:: console
 
         GRANT ALL PRIVILEGES ON watcher.* TO 'watcher'@'localhost' \
           IDENTIFIED BY 'WATCHER_DBPASS';
@@ -32,7 +32,7 @@ you must create a database, service credentials, and API endpoints.
 
    * Exit the database access client.
 
-     .. code-block:: none
+     .. code-block:: console
 
         exit;
 

doc/source/install/index.rst

@@ -23,14 +23,14 @@ of data center operating costs, increased system performance
 via intelligent virtual machine migration, increased energy
 efficiency—and more!
 
-watcher also supports a pluggable architecture by which custom
+Watcher also supports a pluggable architecture by which custom
 optimization algorithms, data metrics and data profilers can be
 developed and inserted into the Watcher framework.
 
-check the documentation for watcher optimization strategies at
+Check the documentation for watcher optimization strategies at
 https://docs.openstack.org/developer/watcher/strategies
 
-check watcher glossary at
+Check watcher glossary at
 https://docs.openstack.org/developer/watcher/glossary.html
 
 

doc/source/install/install-obs.rst

@@ -4,8 +4,9 @@
 Install and configure for openSUSE and SUSE Linux Enterprise
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-This section describes how to install and configure the Infrastructure Optimization service
-for openSUSE Leap 42.1 and SUSE Linux Enterprise Server 12 SP1.
+This section describes how to install and configure the Infrastructure
+Optimization service for openSUSE Leap 42.1 and
+SUSE Linux Enterprise Server 12 SP1.
 
 .. include:: common_prerequisites.rst
 

doc/source/install/install-rdo.rst

@@ -4,8 +4,8 @@ Install and configure for Red Hat Enterprise Linux and CentOS
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 
-This section describes how to install and configure the Infrastructure Optimization service
-for Red Hat Enterprise Linux 7 and CentOS 7.
+This section describes how to install and configure the Infrastructure
+Optimization service for Red Hat Enterprise Linux 7 and CentOS 7.
 
 .. include:: common_prerequisites.rst
 

doc/source/install/install-ubuntu.rst

@@ -3,8 +3,8 @@
 Install and configure for Ubuntu
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-This section describes how to install and configure the Infrastructure Optimization
-service for Ubuntu 14.04 (LTS).
+This section describes how to install and configure the Infrastructure
+Optimization service for Ubuntu 14.04 (LTS).
 
 .. include:: common_prerequisites.rst
 

doc/source/install/install.rst

@@ -3,8 +3,8 @@
 Install and configure
 ~~~~~~~~~~~~~~~~~~~~~
 
-This section describes how to install and configure the
-Infrastructure Optimization service, code-named watcher, on the controller node.
+This section describes how to install and configure the Infrastructure
+Optimization service, code-named watcher, on the controller node.
 
 This section assumes that you already have a working OpenStack
 environment with at least the following components installed:

doc/source/man/index.rst

@@ -0,0 +1,10 @@
+.. toctree::
+   :glob:
+   :maxdepth: 1
+
+   footer.rst
+   general-options
+   watcher-api
+   watcher-applier
+   watcher-db-manage
+   watcher-decision-engine

doc/source/strategies/basic-server-consolidation.rst

@@ -57,7 +57,7 @@ Planner
 
 Default Watcher's planner:
 
-    .. watcher-term:: watcher.decision_engine.planner.default.DefaultPlanner
+    .. watcher-term:: watcher.decision_engine.planner.weight.WeightPlanner
 
 Configuration
 -------------

doc/source/strategies/outlet_temp_control.rst

@@ -61,7 +61,7 @@ Planner
 
 Default Watcher's planner:
 
-    .. watcher-term:: watcher.decision_engine.planner.default.DefaultPlanner
+    .. watcher-term:: watcher.decision_engine.planner.weight.WeightPlanner
 
 Configuration
 -------------

doc/source/strategies/uniform_airflow.rst

@@ -59,7 +59,7 @@ Planner
 
 Default Watcher's planner:
 
-    .. watcher-term:: watcher.decision_engine.planner.default.DefaultPlanner
+    .. watcher-term:: watcher.decision_engine.planner.weight.WeightPlanner
 
 Configuration
 -------------

doc/source/strategies/vm_workload_consolidation.rst

@@ -67,7 +67,7 @@ Planner
 
 Default Watcher's planner:
 
-    .. watcher-term:: watcher.decision_engine.planner.default.DefaultPlanner
+    .. watcher-term:: watcher.decision_engine.planner.weight.WeightPlanner
 
 
 Configuration

doc/source/strategies/workload-stabilization.rst

@@ -58,7 +58,7 @@ Planner
 
 Default Watcher's planner:
 
-    .. watcher-term:: watcher.decision_engine.planner.default.DefaultPlanner
+    .. watcher-term:: watcher.decision_engine.planner.weight.WeightPlanner
 
 Configuration
 -------------

doc/source/strategies/workload_balance.rst

@@ -56,7 +56,7 @@ Planner
 
 Default Watcher's planner:
 
-    .. watcher-term:: watcher.decision_engine.planner.default.DefaultPlanner
+    .. watcher-term:: watcher.decision_engine.planner.weight.WeightPlanner
 
 Configuration
 -------------

doc/source/user/index.rst

@@ -0,0 +1,4 @@
+.. toctree::
+   :maxdepth: 2
+
+   user-guide

doc/source/webapi/index.rst

@@ -0,0 +1,4 @@
+.. toctree::
+   :maxdepth: 1
+
+   v1

doc/source/webapi/v1.rst

@@ -20,6 +20,17 @@ Goals
 .. autotype:: watcher.api.controllers.v1.goal.Goal
    :members:
 
+Strategies
+==========
+
+.. rest-controller:: watcher.api.controllers.v1.strategy:StrategiesController
+   :webprefix: /v1/strategies
+
+.. autotype:: watcher.api.controllers.v1.strategy.StrategyCollection
+   :members:
+
+.. autotype:: watcher.api.controllers.v1.strategy.Strategy
+   :members:
 
 Audit Templates
 ===============

install-guide/source/conf.py

@@ -1,301 +0,0 @@
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-# implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-import os
-# import sys
-
-
-import openstackdocstheme
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-# sys.path.insert(0, os.path.abspath('.'))
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-# needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-# TODO(ajaeger): enable PDF building, for example add 'rst2pdf.pdfbuilder'
-# extensions =
-
-# Add any paths that contain templates here, relative to this directory.
-# templates_path = ['_templates']
-
-# The suffix of source filenames.
-source_suffix = '.rst'
-
-# The encoding of source files.
-# source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = u'Installation Guide for Infrastructure Optimization Service'
-bug_tag = u'install-guide'
-copyright = u'2016, OpenStack contributors'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '0.1'
-# The full version, including alpha/beta/rc tags.
-release = '0.1'
-
-# A few variables have to be set for the log-a-bug feature.
-#   giturl: The location of conf.py on Git. Must be set manually.
-#   gitsha: The SHA checksum of the bug description. Automatically extracted
-#           from git log.
-#   bug_tag: Tag for categorizing the bug. Must be set manually.
-# These variables are passed to the logabug code via html_context.
-giturl = u'http://git.openstack.org/cgit/openstack/watcher/tree/install-guide/source'  # noqa
-git_cmd = "/usr/bin/git log | head -n1 | cut -f2 -d' '"
-gitsha = os.popen(git_cmd).read().strip('\n')
-html_context = {"gitsha": gitsha, "bug_tag": bug_tag,
-                "giturl": giturl,
-                "bug_project": "watcher"}
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-# language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-# today = ''
-# Else, today_fmt is used as the format for a strftime call.
-# today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = ["common_prerequisites.rst", "common_configure.rst"]
-
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-# default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-# add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-# add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-# show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-# modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-# keep_warnings = False
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-html_theme = 'openstackdocs'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-# html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-html_theme_path = [openstackdocstheme.get_html_theme_path()]
-
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-# html_title = None
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-# html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-# html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-# html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-# html_static_path = []
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-# html_extra_path = []
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-# So that we can enable "log-a-bug" links from each output HTML page, this
-# variable must be set to a format that includes year, month, day, hours and
-# minutes.
-html_last_updated_fmt = '%Y-%m-%d %H:%M'
-
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-# html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-# html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-# html_additional_pages = {}
-
-# If false, no module index is generated.
-# html_domain_indices = True
-
-# If false, no index is generated.
-html_use_index = False
-
-# If true, the index is split into individual pages for each letter.
-# html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-html_show_sourcelink = False
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-# html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-# html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-# html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-# html_file_suffix = None
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'install-guide'
-
-# If true, publish source files
-html_copy_source = False
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-    # The paper size ('letterpaper' or 'a4paper').
-    # 'papersize': 'letterpaper',
-
-    # The font size ('10pt', '11pt' or '12pt').
-    # 'pointsize': '10pt',
-
-    # Additional stuff for the LaTeX preamble.
-    # 'preamble': '',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-    ('index', 'InstallGuide.tex', u'Install Guide',
-     u'OpenStack contributors', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-# latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-# latex_use_parts = False
-
-# If true, show page references after internal links.
-# latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-# latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-# latex_appendices = []
-
-# If false, no module index is generated.
-# latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('index', 'installguide', u'Install Guide',
-     [u'OpenStack contributors'], 1)
-]
-
-# If true, show URL addresses after external links.
-# man_show_urls = False
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-    ('index', 'InstallGuide', u'Install Guide',
-     u'OpenStack contributors', 'InstallGuide',
-     'This guide shows OpenStack end users how to install '
-     'an OpenStack cloud.', 'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-# texinfo_appendices = []
-
-# If false, no module index is generated.
-# texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-# texinfo_show_urls = 'footnote'
-
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-# texinfo_no_detailmenu = False
-
-# -- Options for Internationalization output ------------------------------
-locale_dirs = ['locale/']
-
-# -- Options for PDF output --------------------------------------------------
-
-pdf_documents = [
-    ('index', u'InstallGuide', u'Install Guide',
-     u'OpenStack contributors')
-]