Add docker proxy configuration for kubernetes

Current config_controller for containerization pulls kubernetes
images from public container registry. This requires controller
to access internet. If a host network is behind a proxy, there
is no chance to setup docker proxy configuration during config_
controller, therefore, kubernetes images are not accessible.

Docker proxy configuration questions were added to require users
input http/https proxy and no proxy settings. The docker proxy
configurations are added to service_parameter table in sysinv.

http-proxy.conf is the proxy info file required by docker daemon,
generated by docker puppet manifest. It consists of the user
input docker proxy configuration.

Tests:
AIO-SX: public k8s images accessible
AIO-DX: public k8s images accessible
AIO-SX without k8s config: config_controller successfully

Story: 2004710
Task: 28741

Change-Id: Ie273ad77338cdec496c5d05bf3e05baa83166626
Signed-off-by: Mingyuan Qi <mingyuan.qi@intel.com>

configutilities/configutilities/configutilities/__init__.py

@@ -26,6 +26,8 @@ from configutilities.common.utils import is_mtu_valid  # noqa: F401
 from configutilities.common.utils import validate_network_str  # noqa: F401
 from configutilities.common.utils import validate_address_str  # noqa: F401
 from configutilities.common.utils import validate_address  # noqa: F401
+from configutilities.common.utils import is_valid_url  # noqa: F401
+from configutilities.common.utils import is_valid_domain_or_ip  # noqa: F401
 from configutilities.common.utils import ip_version_to_string  # noqa: F401
 from configutilities.common.utils import lag_mode_to_str  # noqa: F401
 from configutilities.common.utils import validate_openstack_password  # noqa: F401

configutilities/configutilities/configutilities/common/utils.py

@@ -11,6 +11,8 @@ import six
 from netaddr import IPNetwork
 from netaddr import IPAddress
 from netaddr import AddrFormatError
+from netaddr import valid_ipv4
+from netaddr import valid_ipv6
 
 from configutilities.common.exceptions import ValidateFail
 
@@ -131,6 +133,65 @@ def is_valid_by_path(filename):
     return "/dev/disk/by-path" in filename and "-part" not in filename
 
 
+def is_valid_url(url_str):
+    # Django URL validation patterns
+    r = re.compile(
+        r'^(?:http|ftp)s?://'  # http:// or https://
+        r'(?:(?:[A-Z0-9](?:[A-Z0-9-]{0,61}[A-Z0-9])?\.)'  # domain...
+        r'+(?:[A-Z]{2,6}\.?|[A-Z0-9-]{2,}\.?)|'
+        r'localhost|'  # localhost...
+        r'\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})'  # ...or ip
+        r'(?::\d+)?'  # optional port
+        r'(?:/?|[/?]\S+)$', re.IGNORECASE)
+
+    url = r.match(url_str)
+    if url:
+        return True
+    else:
+        return False
+
+
+def is_valid_domain(url_str):
+    r = re.compile(
+        r'^(?:(?:[A-Z0-9](?:[A-Z0-9-]{0,61}[A-Z0-9])?\.)'  # domain...
+        r'+(?:[A-Z]{2,6}\.?|[A-Z0-9-]{2,}\.?)|'
+        r'[A-Za-z0-9-_]*)'  # localhost, hostname
+        r'(?::\d+)?'  # optional port
+        r'(?:/?|[/?]\S+)$', re.IGNORECASE)
+
+    url = r.match(url_str)
+    if url:
+        return True
+    else:
+        return False
+
+
+def is_valid_ipv4(address):
+    """Verify that address represents a valid IPv4 address."""
+    try:
+        return valid_ipv4(address)
+    except Exception:
+        return False
+
+
+def is_valid_ipv6(address):
+    try:
+        return valid_ipv6(address)
+    except Exception:
+        return False
+
+
+def is_valid_domain_or_ip(url_str):
+    if is_valid_domain(url_str):
+        return True
+    elif is_valid_ipv4(url_str):
+        return True
+    elif is_valid_ipv6(url_str):
+        return True
+    else:
+        return False
+
+
 def validate_address_str(ip_address_str, network):
     """Determine whether an address is valid."""
     try:

configutilities/configutilities/configutilities/common/validator.py

@@ -24,6 +24,8 @@ from configutilities.common.utils import get_service
 from configutilities.common.utils import get_optional
 from configutilities.common.utils import validate_address_str
 from configutilities.common.utils import validate_nameserver_address_str
+from configutilities.common.utils import is_valid_url
+from configutilities.common.utils import is_valid_domain_or_ip
 from configutilities.common.exceptions import ConfigFail
 from configutilities.common.exceptions import ValidateFail
 
@@ -965,6 +967,48 @@ class ConfigValidator(object):
                         "Invalid DNS NAMESERVER value of %s.\nReason: %s" %
                         (dns_address_str, e))
 
+    def validate_docker_proxy(self):
+        if not self.conf.has_section('DOCKER_PROXY'):
+            return
+        if self.cgcs_conf is not None:
+            self.cgcs_conf.add_section('cDOCKER_PROXY')
+        # check http_proxy
+        if self.conf.has_option('DOCKER_PROXY', 'DOCKER_HTTP_PROXY'):
+            docker_http_proxy_str = self.conf.get(
+                'DOCKER_PROXY', 'DOCKER_HTTP_PROXY')
+            if is_valid_url(docker_http_proxy_str):
+                if self.cgcs_conf is not None:
+                    self.cgcs_conf.set('cDOCKER_PROXY', 'DOCKER_HTTP_PROXY',
+                                       docker_http_proxy_str)
+            else:
+                raise ConfigFail(
+                    "Invalid DOCKER_HTTP_PROXY value of %s." %
+                    docker_http_proxy_str)
+        # check https_proxy
+        if self.conf.has_option('DOCKER_PROXY', 'DOCKER_HTTPS_PROXY'):
+            docker_https_proxy_str = self.conf.get(
+                'DOCKER_PROXY', 'DOCKER_HTTPS_PROXY')
+            if is_valid_url(docker_https_proxy_str):
+                if self.cgcs_conf is not None:
+                    self.cgcs_conf.set('cDOCKER_PROXY', 'DOCKER_HTTPS_PROXY',
+                                       docker_https_proxy_str)
+            else:
+                raise ConfigFail(
+                    "Invalid DOCKER_HTTPS_PROXY value of %s." %
+                    docker_https_proxy_str)
+        # check no_proxy
+        if self.conf.has_option('DOCKER_PROXY', 'DOCKER_NO_PROXY'):
+            docker_no_proxy_list_str = self.conf.get(
+                'DOCKER_PROXY', 'DOCKER_NO_PROXY').split(',')
+            for no_proxy_str in docker_no_proxy_list_str:
+                if not is_valid_domain_or_ip(no_proxy_str):
+                    raise ConfigFail(
+                        "Invalid DOCKER_NO_PROXY value of %s." %
+                        no_proxy_str)
+            if self.cgcs_conf is not None:
+                self.cgcs_conf.set('cDOCKER_PROXY', 'DOCKER_NO_PROXY',
+                                   docker_no_proxy_list_str)
+
     def validate_ntp(self):
         if self.conf.has_section('NTP'):
             raise ConfigFail("NTP Configuration is no longer supported")
@@ -1421,6 +1465,8 @@ def validate(system_config, config_type=REGION_CONFIG, cgcs_config=None,
     # Neutron configuration - leave blank to use defaults
     # DNS configuration
     validator.validate_dns()
+    # Docker Proxy configuration
+    validator.validate_docker_proxy()
     # NTP configuration
     validator.validate_ntp()
     # Network configuration

controllerconfig/controllerconfig/controllerconfig/configassistant.py

@@ -29,6 +29,8 @@ from configutilities import validate_address_str
 from configutilities import validate_address
 from configutilities import ip_version_to_string
 from configutilities import validate_nameserver_address_str
+from configutilities import is_valid_url
+from configutilities import is_valid_domain_or_ip
 from configutilities import validate_openstack_password
 from configutilities import DEFAULT_DOMAIN_NAME
 from netaddr import IPNetwork
@@ -462,6 +464,12 @@ class ConfigAssistant():
         self.cluster_pod_subnet = IPNetwork("172.16.0.0/16")
         self.cluster_service_subnet = IPNetwork("10.96.0.0/12")
 
+        # Docker Proxy config
+        self.enable_docker_proxy = False
+        self.docker_http_proxy = ""
+        self.docker_https_proxy = ""
+        self.docker_no_proxy = ""
+
         # SDN config
         self.enable_sdn = False
 
@@ -2729,6 +2737,118 @@ class ConfigAssistant():
                     print("Invalid address - please enter a valid IPv4 "
                           "address")
 
+    def input_docker_proxy_config(self):
+        """Allow user to input docker proxy config."""
+
+        print("\nDocker Proxy:")
+        print("-------------------------\n")
+        print(textwrap.fill(
+              "Docker proxy is needed if host OAM network is behind a proxy.",
+              80))
+        print('')
+        while True:
+            user_input = input(
+                "Configure docker proxy [y/N]: ")
+            if user_input.lower() == 'q':
+                raise UserQuit
+            elif user_input.lower() == 'y':
+                while True:
+                    user_input = input(
+                        "HTTP proxy (http://example.proxy:port): ")
+                    if user_input.lower() == 'q':
+                        raise UserQuit
+                    if user_input:
+                        if is_valid_url(user_input):
+                            self.docker_http_proxy = user_input
+                            break
+                        else:
+                            print("Please input a valid url")
+                            continue
+                    else:
+                        self.docker_http_proxy = ""
+                        break
+
+                while True:
+                    user_input = input(
+                        "HTTPS proxy (https://example.proxy:port): ")
+                    if user_input.lower() == 'q':
+                        raise UserQuit
+                    if user_input:
+                        if is_valid_url(user_input):
+                            self.docker_https_proxy = user_input
+                            break
+                        else:
+                            print("Please input a valid url")
+                            continue
+                    else:
+                        self.docker_https_proxy = ""
+                        break
+
+                if not self.docker_http_proxy and not self.docker_https_proxy:
+                    print("At least one proxy required")
+                    continue
+                else:
+                    self.enable_docker_proxy = True
+
+                while True:
+                    # TODO: Current Docker version 18.03.1-ce utilizes go-lang
+                    # net library for proxy setting. The go-lang net lib
+                    # doesn't support CIDR notation until this commit:
+                    #
+                    # https://github.com/golang/net/commit/
+                    #     c21de06aaf072cea07f3a65d6970e5c7d8b6cd6d
+                    #
+                    # After docker upgrades to a version that CIDR notation
+                    # supported pre_set_no_proxy will be simplified to subnets
+                    if self.system_mode == \
+                            sysinv_constants.SYSTEM_MODE_SIMPLEX:
+                        pre_set_no_proxy = "localhost,127.0.0.1," + \
+                            str(self.controller_floating_address) + "," + \
+                            str(self.controller_address_0) + "," + \
+                            str(self.controller_address_1) + "," + \
+                            str(self.external_oam_address_0)
+                    else:
+                        pre_set_no_proxy = "localhost,127.0.0.1," + \
+                            str(self.controller_floating_address) + "," + \
+                            str(self.controller_address_0) + "," + \
+                            str(self.controller_address_1) + "," + \
+                            str(self.external_oam_floating_address) + "," + \
+                            str(self.external_oam_address_0) + "," + \
+                            str(self.external_oam_address_1)
+
+                    user_input = input(
+                        "Additional NO proxy besides '" +
+                        pre_set_no_proxy +
+                        "'\n(Comma-separated addresses, " +
+                        "wildcard/subnet not allowed)\n:")
+                    if user_input.lower() == 'q':
+                        raise UserQuit
+                    if user_input:
+                        input_addr_list = user_input.split(",")
+                        valid_address = True
+                        for input_addr in input_addr_list:
+                            if not is_valid_domain_or_ip(input_addr):
+                                print("Input address '%s' is invalid" %
+                                      input_addr)
+                                valid_address = False
+                                break
+                        if valid_address:
+                            self.docker_no_proxy = pre_set_no_proxy + \
+                                "," + user_input
+                            break
+                        else:
+                            continue
+                    else:
+                        self.docker_no_proxy = pre_set_no_proxy
+                        break
+                break
+            elif user_input.lower() in ('n', ''):
+                self.enable_docker_proxy = False
+                break
+            else:
+                print("Invalid choice")
+                continue
+
     def input_authentication_config(self):
         """Allow user to input authentication config and perform validation.
         """
@@ -2814,6 +2934,8 @@ class ConfigAssistant():
         self.input_external_oam_config()
         if self.kubernetes:
             self.input_dns_config()
+            # Docker proxy is only used in kubernetes config
+            self.input_docker_proxy_config()
         self.input_authentication_config()
 
     def is_valid_management_multicast_subnet(self, ip_subnet):
@@ -3159,6 +3281,22 @@ class ConfigAssistant():
                                 self.nameserver_addresses[x] = \
                                     IPAddress(cvalue)
 
+                # Docker Proxy Configuration
+                if config.has_section('cDOCKER_PROXY'):
+                    self.enable_docker_proxy = True
+                    if config.has_option('cDOCKER_PROXY',
+                                         'DOCKER_HTTP_PROXY'):
+                        self.docker_http_proxy = config.get(
+                            'cDOCKER_PROXY', 'DOCKER_HTTP_PROXY')
+                    if config.has_option('cDOCKER_PROXY',
+                                         'DOCKER_HTTPS_PROXY'):
+                        self.docker_https_proxy = config.get(
+                            'cDOCKER_PROXY', 'DOCKER_HTTPS_PROXY')
+                    if config.has_option('cDOCKER_PROXY',
+                                         'DOCKER_NO_PROXY'):
+                        self.docker_no_proxy = config.get(
+                            'cDOCKER_PROXY', 'DOCKER_NO_PROXY')
+
             # SDN Network configuration
             if config.has_option('cSDN', 'ENABLE_SDN'):
                 raise ConfigFail("The option ENABLE_SDN is no longer "
@@ -3602,6 +3740,15 @@ class ConfigAssistant():
                     dns_config = True
             if not dns_config:
                 print("External DNS servers not configured")
+            if self.enable_docker_proxy:
+                print("\nDocker Proxy Configuraton")
+                print("----------------------")
+                if self.docker_http_proxy:
+                    print("Docker HTTP proxy: " + self.docker_http_proxy)
+                if self.docker_https_proxy:
+                    print("Docker HTTPS proxy: " + self.docker_https_proxy)
+                if self.docker_no_proxy:
+                    print("Docker NO proxy: " + self.docker_no_proxy)
 
         if self.region_config:
             print("\nRegion Configuration")
@@ -3899,6 +4046,23 @@ class ConfigAssistant():
                         else:
                             f.write("NAMESERVER_" + str(x + 1) + "=NC" + "\n")
 
+                    # Docker proxy configuration
+                    if self.enable_docker_proxy:
+                        f.write("\n[cDOCKER_PROXY]")
+                        f.write("\n# Docker Proxy Configuration\n")
+                        if self.docker_http_proxy:
+                            f.write(
+                                "DOCKER_HTTP_PROXY=" +
+                                str(self.docker_http_proxy) + "\n")
+                        if self.docker_https_proxy:
+                            f.write(
+                                "DOCKER_HTTPS_PROXY=" +
+                                str(self.docker_https_proxy) + "\n")
+                        if self.docker_no_proxy:
+                            f.write(
+                                "DOCKER_NO_PROXY=" +
+                                str(self.docker_no_proxy) + "\n")
+
                 # Network configuration
                 f.write("\n[cNETWORK]")
                 f.write("\n# Data Network Configuration\n")
@@ -5302,6 +5466,24 @@ class ConfigAssistant():
         patch = sysinv.dict_to_patch(values)
         client.sysinv.idns.update(dns_record.uuid, patch)
 
+    def _populate_docker_config(self, client):
+        parameter = {}
+        if self.docker_http_proxy:
+            parameter['http_proxy'] = self.docker_http_proxy
+        if self.docker_https_proxy:
+            parameter['https_proxy'] = self.docker_https_proxy
+        if self.docker_no_proxy:
+            parameter['no_proxy'] = self.docker_no_proxy
+
+        if parameter:
+            client.sysinv.service_parameter.create(
+                sysinv_constants.SERVICE_TYPE_DOCKER,
+                sysinv_constants.SERVICE_PARAM_SECTION_DOCKER_PROXY,
+                None,
+                None,
+                parameter
+            )
+
     def populate_initial_config(self):
         """Populate initial system inventory configuration"""
         try:
@@ -5311,6 +5493,8 @@ class ConfigAssistant():
                 self._populate_network_config(client)
                 if self.kubernetes:
                     self._populate_dns_config(client)
+                    if self.enable_docker_proxy:
+                        self._populate_docker_config(client)
                 controller = self._populate_controller_config(client)
                 # ceph_mon config requires controller host to be created
                 self._inventory_config_complete_wait(client, controller)

controllerconfig/controllerconfig/controllerconfig/tests/files/cgcs_config.kubernetes

@@ -73,6 +73,12 @@ NAMESERVER_1=1.2.3.4
 NAMESERVER_2=5.6.7.8
 NAMESERVER_3=NC
 
+[cDOCKER_PROXY]
+# Docker Proxy Configuration
+DOCKER_HTTP_PROXY=http://proxy.com:123
+DOCKER_HTTPS_PROXY=https://proxy.com:123
+DOCKER_NO_PROXY=localhost,127.0.0.1,192.168.204.2
+
 [cNETWORK]
 # Data Network Configuration
 VSWITCH_TYPE=ovs-dpdk

controllerconfig/controllerconfig/controllerconfig/tests/files/system_config.kubernetes

@@ -49,6 +49,12 @@ LOGICAL_INTERFACE=LOGICAL_INTERFACE_2
 NAMESERVER_1=1.2.3.4
 NAMESERVER_2=5.6.7.8
 
+[DOCKER_PROXY]
+# Docker Proxy Configuration
+DOCKER_HTTP_PROXY=http://proxy.com:123
+DOCKER_HTTPS_PROXY=https://proxy.com:123
+DOCKER_NO_PROXY=localhost,127.0.0.1,192.168.204.2
+
 ;[PXEBOOT_NETWORK]
 ;PXEBOOT_CIDR=192.168.203.0/24
 

controllerconfig/controllerconfig/controllerconfig/tests/test_system_config.py

@@ -647,3 +647,10 @@ def test_kubernetes():
     cr.create_cgcs_config_file(None, system_config, None, None, None, 0,
                                validate_only=True)
     validate(system_config, DEFAULT_CONFIG, None, False)
+
+    # Test absence of optional docker proxy configuration
+    system_config = cr.parse_system_config(systemfile)
+    system_config.remove_section('DOCKER_PROXY')
+    cr.create_cgcs_config_file(None, system_config, None, None, None, 0,
+                               validate_only=True)
+    validate(system_config, DEFAULT_CONFIG, None, False)

puppet-manifests/src/modules/platform/manifests/docker.pp

@@ -1,5 +1,8 @@
 class platform::docker::params (
-  $package_name    = 'docker-ce',
+  $package_name = 'docker-ce',
+  $http_proxy   = undef,
+  $https_proxy  = undef,
+  $no_proxy     = undef,
 ) { }
 
 class platform::docker::config
@@ -9,6 +12,22 @@ class platform::docker::config
 
   if $::platform::kubernetes::params::enabled {
 
+    if $http_proxy or $https_proxy {
+      file { '/etc/systemd/system/docker.service.d':
+        ensure => 'directory',
+        owner  => 'root',
+        group  => 'root',
+        mode   => '0755',
+      }
+      -> file { '/etc/systemd/system/docker.service.d/http-proxy.conf':
+        ensure  => present,
+        owner   => 'root',
+        group   => 'root',
+        mode    => '0644',
+        content => template('platform/dockerproxy.conf.erb'),
+      }
+    }
+
     Class['::platform::filesystem::docker'] ~> Class[$name]
 
     service { 'docker':

puppet-manifests/src/modules/platform/templates/dockerproxy.conf.erb

@@ -0,0 +1,8 @@
+[Service]
+<%- if @http_proxy -%>
+Environment="HTTP_PROXY=<%= @http_proxy %>"
+<%- end -%>
+<%- if @https_proxy -%>
+Environment="HTTPS_PROXY=<%= @https_proxy %>"
+<%- end -%>
+Environment="NO_PROXY=<%= @no_proxy %>"

sysinv/sysinv/sysinv/sysinv/common/constants.py

@@ -874,6 +874,7 @@ SERVICE_TYPE_PANKO = 'panko'
 SERVICE_TYPE_AODH = 'aodh'
 SERVICE_TYPE_GLANCE = 'glance'
 SERVICE_TYPE_BARBICAN = 'barbican'
+SERVICE_TYPE_DOCKER = 'docker'
 
 SERVICE_PARAM_SECTION_MURANO_RABBITMQ = 'rabbitmq'
 SERVICE_PARAM_SECTION_MURANO_ENGINE = 'engine'
@@ -1064,6 +1065,13 @@ SERVICE_PARAM_AODH_DATABASE_ALARM_HISTORY_TIME_TO_LIVE_DEFAULT = PM_TTL_DEFAULT
 SERVICE_PARAM_SECTION_SWIFT_CONFIG = 'config'
 SERVICE_PARAM_NAME_SWIFT_SERVICE_ENABLED = 'service_enabled'
 SERVICE_PARAM_NAME_SWIFT_FS_SIZE_MB = 'fs_size_mb'
+
+# docker parameters
+SERVICE_PARAM_SECTION_DOCKER_PROXY = 'proxy'
+SERVICE_PARAM_NAME_DOCKER_HTTP_PROXY = 'http_proxy'
+SERVICE_PARAM_NAME_DOCKER_HTTPS_PROXY = 'https_proxy'
+SERVICE_PARAM_NAME_DOCKER_NO_PROXY = 'no_proxy'
+
 # default filesystem size to 25 MB
 SERVICE_PARAM_SWIFT_FS_SIZE_MB_DEFAULT = 25
 

sysinv/sysinv/sysinv/sysinv/common/service_parameter.py

@@ -648,6 +648,25 @@ def _validate_swift_enabled(name, value):
             "Swift API is already supported by Ceph Object Gateway."))
 
 
+def _validate_docker_proxy_address(name, value):
+    """Check if proxy value is valid"""
+    if not cutils.is_url(value):
+        raise wsme.exc.ClientSideError(_(
+            "Parameter '%s' must be a valid address." % name))
+
+
+def _validate_docker_no_proxy_address(name, value):
+    """Check if no proxy value is valid"""
+    values = value.split(',')
+    for item in values:
+        # will extend to more cases if CIDR notation is supported
+        if not cutils.is_valid_domain(item):
+            if not cutils.is_valid_ip(item):
+                raise wsme.exc.ClientSideError(_(
+                    "Parameter '%s' includes an invalid address '%s'." %
+                    (name, item)))
+
+
 # LDAP Identity Service Parameters (mandatory)
 SERVICE_PARAM_IDENTITY_LDAP_URL = 'url'
 
@@ -1476,6 +1495,27 @@ SWIFT_CONFIG_PARAMETER_DATA_FORMAT = {
     constants.SERVICE_PARAM_NAME_SWIFT_SERVICE_ENABLED: SERVICE_PARAMETER_DATA_FORMAT_BOOLEAN,
 }
 
+DOCKER_PROXY_PARAMETER_OPTIONAL = [
+    constants.SERVICE_PARAM_NAME_DOCKER_HTTP_PROXY,
+    constants.SERVICE_PARAM_NAME_DOCKER_HTTPS_PROXY,
+    constants.SERVICE_PARAM_NAME_DOCKER_NO_PROXY,
+]
+
+DOCKER_PROXY_PARAMETER_VALIDATOR = {
+    constants.SERVICE_PARAM_NAME_DOCKER_HTTP_PROXY: _validate_docker_proxy_address,
+    constants.SERVICE_PARAM_NAME_DOCKER_HTTPS_PROXY: _validate_docker_proxy_address,
+    constants.SERVICE_PARAM_NAME_DOCKER_NO_PROXY: _validate_docker_no_proxy_address,
+}
+
+DOCKER_PROXY_PARAMETER_RESOURCE = {
+    constants.SERVICE_PARAM_NAME_DOCKER_HTTP_PROXY:
+        'platform::docker::params::http_proxy',
+    constants.SERVICE_PARAM_NAME_DOCKER_HTTPS_PROXY:
+        'platform::docker::params::https_proxy',
+    constants.SERVICE_PARAM_NAME_DOCKER_NO_PROXY:
+        'platform::docker::params::no_proxy',
+}
+
 # Service Parameter Schema
 SERVICE_PARAM_MANDATORY = 'mandatory'
 SERVICE_PARAM_OPTIONAL = 'optional'
@@ -1652,6 +1692,13 @@ SERVICE_PARAMETER_SCHEMA = {
             SERVICE_PARAM_DATA_FORMAT: SWIFT_CONFIG_PARAMETER_DATA_FORMAT,
         },
     },
+    constants.SERVICE_TYPE_DOCKER: {
+        constants.SERVICE_PARAM_SECTION_DOCKER_PROXY: {
+            SERVICE_PARAM_OPTIONAL: DOCKER_PROXY_PARAMETER_OPTIONAL,
+            SERVICE_PARAM_VALIDATOR: DOCKER_PROXY_PARAMETER_VALIDATOR,
+            SERVICE_PARAM_RESOURCE: DOCKER_PROXY_PARAMETER_RESOURCE,
+        },
+    },
 }
 
 SERVICE_PARAMETER_MAX_LENGTH = 255

sysinv/sysinv/sysinv/sysinv/common/utils.py

@@ -1797,6 +1797,21 @@ def is_url(url_str):
         return False
 
 
+def is_valid_domain(url_str):
+    r = re.compile(
+        r'^(?:(?:[A-Z0-9](?:[A-Z0-9-]{0,61}[A-Z0-9])?\.)'  # domain...
+        r'+(?:[A-Z]{2,6}\.?|[A-Z0-9-]{2,}\.?)|'
+        r'[A-Za-z0-9-_]*)'  # localhost, hostname
+        r'(?::\d+)?'  # optional port
+        r'(?:/?|[/?]\S+)$', re.IGNORECASE)
+
+    url = r.match(url_str)
+    if url:
+        return True
+    else:
+        return False
+
+
 def verify_checksum(path):
     """ Find and validate the checksum file in a given directory. """
     rc = True