Recent commit https://opendev.org/starlingx/config/commit/634d4916
introducing changes for dual-stack networking made a change
to the DB api's address_get_by_name to return a list of IPv4 and
IPv6 addresses rather than a singular address. As such, the list
can be empty if there are no addresses associated with a
particular name, rather than throwing an AddressNotFoundByName
exception.
Currently, the interface_network code depends on the
AddressNotFoundByName exception to determine whether a new
address needs to be allocated for a dynamic network.
This can cause an issue for worker, storage nodes when one of
their interfaces is associated with certain networks (such as
the storage network).
The symptom of this may be an interface which is 'DOWN' after
unlock, as it's interface configuration file is marked for a
'static' address, with no address present (because it wasn't
allocated).
This commit fixes the issue by simply checking that the list
returned by address_get_by_name is empty.
Test Plan:
- Fresh install of a Standard system.
- Ensure named addresses are present in the DB for all
nodes (mgmt, cluster-host, oam for controllers)
- Create a new address pool and storage network and
assign it to a worker node interface.
- Unlock the worker node and ensure the address is
present on the interface and it is in 'UP' state.
Story: 2011027
Task: 49627
Change-Id: I9763f7c71797d9b321e7bf9e1b6db759378af632
Signed-off-by: Steven Webster <steven.webster@windriver.com>
As of now, the script only verifies the validity of leaf certificates
and, if expired, will regenerate them based on K8s/etcd Root CAs.
It doesn't account for the possibility of Root CAs being expired.
It will generate leaf certificates based on Root CAs, even if said
Root CAs are expired.
This change fixes that behaviour by first checking validity of
Root CAs and only allowing leaf certificate renewal if RCAs are
valid.
Test plan:
PASS: Cause Root CAs to expire, run kube-cert-rotation.sh script
and verify that it fails with an error saying Root CAs are
expired and leaf certificates are not renewed.
PASS: Ensure to have valid Root CAs, cause leaf certificates
to expire, run kube-cert-rotation.sh and verify that the
script executes normally and is able to renew
the leaf certificates.
Closes-Bug: 2059708
Signed-off-by: Rei Oliveira <Reinildes.JoseMateusOliveira@windriver.com>
Change-Id: I98dfd8d1417754f3c723d8ddd52a856785ffc83b
This commit introduces a new configuration for swanctl.conf file
where cacerts references two system-local-ca files. The two files
represents the last (system-local-ca-0.crt) and the current
(system-local-ca-1.crt) certificates associated with system-local-ca.
The main goal of this implementation is to maintain SAs in all nodes
during the update of system-local-ca certificate.
Test plan:
PASS: In a DX system with available enabled active status with IPsec
server being executed from controller-0. Run "ipsec-client
pxecontroller --opcode 1" in worker-0. Observe that certificates,
keys and swanctl.conf files are created in worker-0 node. Observe
that a security association is established between the hosts via
"sudo swanctl --list-sas" command.
PASS: In a DX system with available enabled active status with IPsec
server being executed from controller-0. Run "ipsec-client
pxecontroller --opcode 2" in controller-1. Observe the previously
created CertificateRequest was deleted and generated a new one for
controller-1's node. The new certificate is sent to IPsec Client
and stored with the swanctl rekey command executed sucessfully.
Story: 2010940
Task: 49777
Change-Id: I638932a602ed9423d20ed448e5aada499ef65d77
Signed-off-by: Manoel Benedito Neto <Manoel.BeneditoNeto@windriver.com>
This is incremental fix of bug:2053149.
Upon network boot (first boot) of worker node, agent manager is
supposed to report ports/devices, without waiting for worker manifest,
as that would never run on first boot. Without this, after system
restore, it will be unable to unlock compute node due to sriov config
update.
kickstart records first boot as "/etc/platform/.first_boot". Agent
manager deletes this file. In case agent manager get crashed, it will
start again. This time, agent manager don't see .first_boot file, and
don't know this is still first boot and it won't report inventory for
the worker node.
This commit fixes this issue by creating volatile file
"/var/run/.first_boot" before deleting "/etc/platform/.first_boot", and
agent relies on both files to figure out it is first boot or not. This
present same logic for multiple crash/restart of agent manager.
TEST PLAN:
PASS: AIO-DX bootstrap has no issues. lock/unlock has no issues.
PASS: Network-boot worker node, before doing unlock, restart agent
manager (sysinv-agent), check sysinv.log to see ports are reported.
Closes-Bug: 2053149
Change-Id: Iace5576575388a6ed3403590dbeec545c25fc0e0
Signed-off-by: Tara Nath Subedi <tara.subedi@windriver.com>
This removes the skip_update_config parameter from the
_config_apply_runtime_manifest() call when upgrading Kubernetes
control-plane. This parameter was unintentially set to True,
so this configuration step did not persist. This caused
generation of 250.001 config-out-of-date alarms during kube
upgrade.
The review that introduced the bug:
https://review.opendev.org/c/starlingx/config/+/911100
TEST PLAN:
- watch /var/log/nfv-vim.log for each orchestrated upgrade
PASS: orchestrated k8s upgrade (no faults)
- AIO-SX, AIO-DX, Standard
PASS: orchestrated k8s upgrade, with fault insertion during
control-plane upgrade first attempt
- AIO-SX
- AIO-DX (both controller-0, controller-1)
- Standard (both controller-0, controller-1)
PASS: orchestrated k8s upgrade, with fault insertion during
control-plane upgrade first and second attempt, trigger abort
- AIO-SX
- AIO-DX (first controller)
Closes-Bug: 2056326
Change-Id: I629c8133312faa5c95d06960b15d3e516e48e4cb
Signed-off-by: Jim Gauld <James.Gauld@windriver.com>
User unable to take subcloud backup when there
is a stale backup in progress alarm
Example:
When user tries to take subcloud backup in
Distributed cloud env if there is stale
210.001 alarm present in subcloud then user
can not trigger the subsequent subcloud backup
This Fix helps to identify the 210.001 alarms
and clear them if they are pending more than 1
hour
TEST PLAN:
PASS: DC-libvirt setup with 2 controllers
and 2 subclouds
PASS: verified stale 210.001 getting removed
Closes-Bug: 2058516
Change-Id: Iedcc5e41cd4245c538d331d9aa8c2b6cc445acce
Signed-off-by: rummadis <ramu.ummadishetty@windriver.com>
Add mtce user to endpoint reconfiguration script to improve bootstrap
execution time. The related puppet class and tasks will be removed in
commit:
https://review.opendev.org/c/starlingx/stx-puppet/+/912319.
Test Plan:
PASS: Deploy a subcloud without the changes and record its bootstrap
execution time. Deploy another subcloud with the proposed changes.
Verify successful subcloud deployment and the bootstrap execution
time is 80s faster.
PASS: Verify a successful AIO-SX deployment.
PASS: Verify a successful AIO-DX controller deployment.
PASS: Verify a successful DC environment deployment.
Story: 2011035
Task: 49695
Change-Id: I2075026bd378ef3b30978a6d420fbb2253ba290c
Signed-off-by: Gustavo Pereira <gustavo.lyrapereira@windriver.com>
An issue was found when config_applied for a host assumed
the default value, which is the string "install" (refer to [1]),
returning a type error in runtime_config_get trying to compare
string "install" with a column "id" with type int.
This commit fixes runtime_config_get method by inverting the
logic: if the id passed is an int then compare with id, if it
is not then assume it is a string and compare with config_uuid
column.
[1] 15aefdc468/sysinv/sysinv/sysinv/sysinv/agent/manager.py (L116)
Test Plan
PASS: set config_applied="install" for a host, force inventory
report and observe no more database errors on sysinv.log
PASS: install/bootstrap/unlock AIO-DX
Story: 2010676
Task: 49745
Signed-off-by: Heitor Matsui <heitorvieira.matsui@windriver.com>
Change-Id: I9c687a1eb67c62291f1d2aa9cef1d6fbe993d0fa
This commit exposes the Kubernetes API extensions in order to allow
StarlingX Applications to manage CRDs using API calls.
Test Plan:
PASS: AIO-SX host-lock and host-unlock run successfully.
PASS: Exposed resources have been called from an Application and
run accordingly.
Story: 2011069
Task: 49756
Change-Id: I7d04d3e779dae9ebf95403c8afb93fe6d048993b
Signed-off-by: Guilherme Santos <guilherme.santos@windriver.com>
Max_cpu_mhz_personality is the attribute of the host which
can be configured in host where turbo freq is enabled.In case
of host whose role is both controller and worker, the personality
for the attribute was not taken care to include such scenario.
Made the changes in the sysinv conductor to update the host
personalities based on the function that node operates, which
handles the scenario when the host acts as both controller and
worker node.
TEST PLAN:
PASS: Build and deploy ISO on Simplex
PASS: Check whether the max cpu freq set on a simplex
Below are the commands:
system host-show <host_id> | grep is_max_cpu_configurable
system service-parameter-list --name cpu_max_freq_min_percentage
system service-parameter-modify platform config cpu_max_freq_min_percentage=<>
system host-update <host_id> max_cpu_mhz_configured=<value in mhz>
After above commands check whether cpu is set using below command:
sudo turbostat
Closes-Bug: 2058476
Change-Id: I08a5d1400834afca6a0eeaaa8813ac8d71a9db15
Signed-off-by: Poornima Y N <Poornima.Y.N@windriver.com>
Add FM user to endpoint reconfiguration script, following
the migration of FM bootstrap from puppet to Ansible:
https://review.opendev.org/c/starlingx/ansible-playbooks/+/913251
Openstack related operations (user, service and
endpoint configuration) are now handled exclusively
by sysinv config_endpoints
Test Plan:
1. PASS: Verify full DC system deployment - System Controller + 3
Subclouds install/bootstrap (virtual lab)
2. PASS: Verify Openstack FM user created
3. PASS: Verify Admin role for the FM user set in the services project
4. PASS: Verify Openstack FM service created
5. PASS: Verify admin, internal and public endpoints configured for FM
Story: 2011035
Task: 49722
Change-Id: I7d2f1596595ec2613cd5de1ca3d99427ea32d52d
Signed-off-by: Salman Rana <salman.rana@windriver.com>
In the case of a rare intermittent failure behaviour during the
upgrading control plane step where puppet hits timeout first before
the upgrade is completed or kubeadm hits its own Upgrade Manifest
timeout (at 5m).
This change will retry running the process by
reporting failure to conductor when puppet manifest apply fails.
Since it is using RPC to send messages with options, we don't get
the return code directly and hence, cannot use a retry decorator.
So we use the sysinv report callback feature to handle the
success/failure path.
TEST PLAN:
PASS: Perform simplex and duplex k8s upgrade successfully.
PASS: Install iso successfully.
PASS: Manually send STOP signal to pause the process so that
puppet manifest timeout and check whether retry code works
and in retry attempts the upgrade completes.
PASS: Manually decrease the puppet timeout to very low number
and verify that code retries 2 times and updates failure
state
PASS: Perform orchestrated k8s upgrade, Manually send STOP
signal to pause the kubeadm process during step
upgrading-first-master and perform system kube-upgrade-abort.
Verify that upgrade-aborted successfully and also verify
that code does not try the retry mechanism for
k8s upgrade control-plane as it is not in desired
KUBE_UPGRADING_FIRST_MASTER or KUBE_UPGRADING_SECOND_MASTER
state
PASS: Perform manual k8s upgrade, for k8s upgrade control-plane
failure perform manual upgrade-abort successfully.
Perform Orchestrated k8s upgrade, for k8s upgrade control-plane
failure after retries nfv aborts automatically.
Closes-Bug: 2056326
Depends-on: https://review.opendev.org/c/starlingx/nfv/+/912806https://review.opendev.org/c/starlingx/stx-puppet/+/911945https://review.opendev.org/c/starlingx/integ/+/913422
Change-Id: I5dc3b87530be89d623b40da650b7ff04c69f1cc5
Signed-off-by: Saba Touheed Mujawar <sabatouheed.mujawar@windriver.com>
This change allows the management and admin
network reconfig at same time in an AIO-DX
subcloud.
Currently, it is necessary to lock and unlock
the controller in order to reconfigure the
management network from AIO-SX.
If the customer changes the management network
fist, the new mgmt network will be in the database
but the changes will jsut be applied during the
unlock / reboot of the system.
But the admin network changes are applied in runtime,
if the admin network is changed after the management
network reconfig, the admin will apply the changes on
the system and some of them will apply the new mgmt
network values before the system is updated with the
new mgmt ip range, it will cause a puppet error and
the system will not be correctly configured.
Tests done:
IPv4 AIO-SX subcloud mgmt network reconfig
IPv4 AIO-SX subcloud admin network reconfig
IPv4 AIO-SX subcloud admin and mgmt network reconfig
IPv4 AIO-SX subcloud mgmt and admin network reconfig
Story: 2010722
Task: 49724
Change-Id: I113eab2618f34b305cb7c4ee9bb129597f3898bb
Signed-off-by: Fabiano Correa Mercer <fabiano.correamercer@windriver.com>
Add Barbican user to endpoint reconfiguration script.
Openstack related operations (user, service and endpoint configuration)
are now handled exclusively by sysinv config_endpoints
Test Plan:
1. PASS: Verify full DC system deployment - System Controller + 3
Subclouds install/bootstrap (virtual lab)
2. PASS: Verify Openstack Barbican user created
3. PASS: Verify Admin role for the Barbican user set in the services
project
4. PASS: Verify Openstack Barbican service created
5. PASS: Verify admin, internal and public endpoints configured for
Barbican
Story: 2011035
Task: 49738
Change-Id: I8045cb12d3faa20147b0b84bc9e5ce6c2e0cddf2
Signed-off-by: Hugo Brito <hugo.brito@windriver.com>
This change updated IPsec IKE daemon log (charon.log) configuration
so more details are logged and in better format.
Test Plan:
PASS: Run ipsec-client to generate charon-log.conf and restart ipsec,
verify charon logs capture new details and in the new expected
format.
Story: 2010940
Task: 49711
Change-Id: I0c2943ba60e1867dfcebddca175058b62dde4ad7
Signed-off-by: Andy Ning <andy.ning@windriver.com>
On the health check prior to rootca update, there was a bug that
prevented CrashLoopBackoff pods being detected as unhealthy. This is
because the pods are in phase "Running", but the status of the
container itself is "ready: false". This commit adds an additional
check to "Running" pods so if any container inside it is not ready,
the pod will be deemed unhealthy.
Test plan:
- PASS: Attempt to perform a rootca update with a pod in
CrashloopBackoff state. Verify the update is not possible
and the health check fails with the pod being show as
unhealthy is "system health-query-kube-upgrade --rootca"
- PASS: Verify the rootca update is possible if no pods are in
CrashloopBackoff state.
Closes-Bug: 2057779
Change-Id: I115b6621df11516db2279fe6bc96452d27975c50
Signed-off-by: Victor Romano <victor.gluzromano@windriver.com>
This commit adds an OTS Token activation procedure to IPsec server
implementation. With this implementation, OTS Token is activated
when PKI Auth response message is sent from IPsec server to IPsec
client. The Token expiry time was increased to 7 seconds due to
Kubernetes API dependability that may delay IPsec Auth procedure
in a few seconds, affecting OTS Token validation criterea.
Test plan:
PASS: Full build, system install, bootstrap and unlock DX system w/
unlocked enabled available status.
PASS: In a DC system with available enabled active status with IPsec
server being executed from controller-0. Run "ipsec-client
pxecontroller --opcode 1" in worker-0. Observe that certificates,
keys and swanctl.conf files are created in worker-0 node. Observe
that a security association is established between the hosts via
"sudo swanctl --list-sas" command.
PASS: In a DC system with available enabled active status with IPsec
server being executed from controller-0. Run "ipsec-client
pxecontroller --opcode 2" in controller-1. Observe the previously
created CertificateRequest was deleted and generated a new one for
controller-1's node. The new certificate is sent to IPsec Client
and stored with the swanctl rekey command executed sucessfully.
Story: 2010940
Task: 49712
Change-Id: I1c65edf14fd7ae3f47309b35048a805e0306038d
Signed-off-by: Manoel Benedito Neto <Manoel.BeneditoNeto@windriver.com>
This commit fixes an LDAP authentication issue seen on worker nodes
of a subcloud after a rehoming procedure was performed.
There are two main parts:
1. Since every host of a subcloud authenticates with the system
controller, we need to reconfigure the LDAP URI across all nodes
of the system when the system controller network changes (upon
rehome). Currently, it is only being reconfigured on controller
nodes.
2. Currently, the system uses an SNAT rule to allow worker/storage
nodes to authenticate with the system controller when the admin
network is in use. This is because the admin network only exists
between controller nodes of a distributed cloud. The SNAT rule
is needed to allow traffic from the (private) management network
of the subcloud over the admin network to the system controller
and back again. If the admin network is _not_ being used,
worker/storage nodes of the subcloud can authenticate with the
system controller, but routes must be installed on the
worker/storage nodes to facilitate this. It becomes tricky to
manage in certain circumstances of rehoming/network config.
This traffic really should be treated in the same way as that
of the admin network.
This commit addresses the above by:
1. Reconfiguring the ldap_server config across all nodes upon
system controller network changes.
2. Generalizing the current admin network nat implementation to
handle the management network as well.
Test Plan:
IPv4, IPv6 distributed clouds
1. Rehome a subcloud to another system controller and back again
(mgmt network)
2. Update the subcloud to use the admin network (mgmt -> admin)
3. Rehome the subcloud to another system controller and back again
(admin network)
4. Update the subcloud to use the mgmt network (admin -> mgmt)
After each of the numbered steps, the following were performed:
a. Ensure the system controller could become managed, online, in-sync
b. Ensure the iptables SNAT rules were installed or updated
appropriately on the subcloud controller nodes.
c. Log into a worker node of the subcloud and ensure sudo commands
could be issued without LDAP timeout.
d. Log into worder node with LDAP USER X via console and verify
login succeed
In general, tcpdump was also used to ensure the SNAT translation was
actually happening.
Partial-Bug: #2056560
Change-Id: Ia675a4ff3a2cba93e4ef62b27dba91802811e097
Signed-off-by: Steven Webster <steven.webster@windriver.com>
This change added the IPsec certificates renewal script, and set it up
as a cron job to run daily at mid night.
Test Plan:
PASS: After a DX system deployed, verify the script is in the correct
directory with right permission, and is added in
/var/spool/cron/crontabs/root
PASS: Simulate the IPsec cert is about to expire, run the script,
verify IPsec cert, private key and trusted CA cert are renewed,
and IKE SAs and CHILD SAs are re-established.
PASS: Simulate a failure condition (eg, ipsec-client return non zero),
run the script, verify the IPsec renewal fails, and alarm
250.004 is raised.
PASS: Run the script with IPsec cert not being about to expire, verify
the script finish successfully and alarm 250.004 is cleared.
PASS: Simulate the IPsec trusted CA cert is different from the
system-local-ca in k8s secret, run the script, verify the trusted
CA and IPsec cert/key are renewed, and IKE SAs and CHILD SAs are
re-established.
Story: 2010940
Task: 49705
Depends-On: https://review.opendev.org/c/starlingx/fault/+/912598
Change-Id: I69236399b59655dd67ac7b01c4472a4b7ab911e5
Signed-off-by: Andy Ning <andy.ning@windriver.com>
Details:
This change extracts the addresses from both the primary and secondary
address pools and makes them available for use in Puppet manifests.
To accommodate the dual stack configuration, the address allocation
for non-controller nodes was updated for both management and
cluster-host networks.
Since the task for upgrade data-migration is not ready yet, a logic
was added to access directly the network's field pool_uuid and get
the addresses with it, if the network_addresspools is empty (as it
would be the case after an upgrade)
As the data migration functionality for the upgrade is still under
development, a temporary solution was implemented. Logic was added
to directly access the network's "pool_uuid" field and retrieve
addresses through it whenever the "network_addresspools" list is
empty, which is expected to occur immediately following an upgrade.
This allows for uninterrupted network operation during the upgrade
process.
Variable Naming:
The following naming convention will be used for the variables:
$platform::network::[network_type]::[ipv4/ipv6]::params::{var_name}
Variable Usage:
Primary Pool: Existing variables will be maintained and populated with
addresses from the primary pool. This ensures compatibility with
applications that currently rely on them. They have the format
$platform::network::[network_type]::params::{var_name}
The variable platform::network::[network_type]::params::subnet_version
indicates the primary pool protocol.
Secondary Pool: New variables with the above naming convention will
be introduced, allowing applications to utilize addresses from the
secondary pool if needed.
Benefits:
Improved modularity and reusability of network configurations.
Clear separation of concerns between primary and secondary pools.
Easier implementation of applications requiring addresses from either pool.
Notes:
Replace [network_type] can be oam. mgmt, cluster_host, ...
Replace [ipv4/ipv6] with either "ipv4" or "ipv6" depending on
the address family.
Replace [variable_name] with a descriptive name for the specific
variable (e.g., "subnet_version", "interface_address").
Test Plan:
[PASS] unit tests implemented
[PASS] AIO-SX, Standard instalation (IPv4 and IPv6)
- using the dependency change the secondary pool was introduced
- system was lock/unlocked and no puppet manifests were
detected
- inspection of system.yaml and controller-0.yaml to verify
variables content
- no alarms or disabled services were found
- in standard added hosts with dual-stack config and verified
that addresses were allocated for mgmt and cluster-host and
after unlock the interface id was assigned to the respective
entries.
[PASS] For standard systems during upgrade, simulate node unlock by:
- Clearing the "network_addresspools" table after Ansible
execution and before DM configuration.
- Installing remaining nodes with the table empty. This mimics
the post-upgrade scenario.
Story: 2011027
Task: 49679
Depends-On: https://review.opendev.org/c/starlingx/config/+/908915
Change-Id: If252fa051b2ba5b5eb3033ff269683af741091d2
Signed-off-by: Andre Kantek <andrefernandozanella.kantek@windriver.com>
During an upgrade abort scenario where both
controllers are already upgraded to release N+1,
a potential issue arises.
Release N+1 utilizes a new hieradata file named
hostname-X.yaml, while release N uses the older
ip.yaml.
Controller-0 must be downgraded first, making
controller-1 the active node.
However, controller-1 attempts to update the
hieradata file at
/opt/platform/puppet/<Release N>/.../controller-0.yaml
This file doesn't exist because release N uses ip.yaml
Solution:
The system needs to identify this downgrade scenario
and update the correct hieradata file for release N:
/opt/platform/puppet/<Release N>/hieradata/<ip>.yaml
Tests Done:
AIO-DX IPv6 fresh install
AIO-DX IPv6 upgrade abort
Story: 2010722
Task: 49692
Change-Id: I848543e7606ddc5bb24ddadb07a7a74d56126044
Signed-off-by: Fabiano Correa Mercer <fabiano.correamercer@windriver.com>
This commit adds IPsec Cert-Renewal implementation to work
properly when specified by "--opcode" parameter in IPsec
client execution.
This implementation adds to IPsec client a rekey step after
the generated keys and cert are stored and exchanged during
cert-renewal operation. The main goal of this implementation
is to provide new certificates and keys for an IPsec client
host that has already been authenticated by IPsec server host.
Test Plan:
PASS: Full build, system install, bootstrap and unlock DX system w/
unlocked enabled available status.
PASS: Execute "ipsec-client pxecontroller --opcode 2" in controller-1.
Observe the previously created CertificateRequest was deleted and
generated a new one for controller-1's node. The new certificate
is sent to IPsec Client and stored with the swanctl rekey command
executed sucessfully.
PASS: In a DC system with available enabled active status with IPsec
server being executed from controller-0. Change c0 and c1 dates
to expire IPsec certificates. If needed, recover kubernetes
certificates or pods. Execute "sudo ipsec-client pxecontroller
-o 2" command from controller-0 and controller-1. Observe that
certificates and keys were generated and stored in /etc/swanctl/
directory. Observe new SAs have been created between controllers
by executing "sudo swanctl --list-sas" command.
Story: 2010940
Task: 49656
Change-Id: I69383005c2e204fe0a6401b2efaf05e8754f2bc3
Signed-off-by: Manoel Benedito Neto <Manoel.BeneditoNeto@windriver.com>
Add a configuration option to sysinv.conf that sets the default behavior
for automatically updating apps if not specified in the application
metadata.
The new option is named 'missing_auto_update' and it is available under
the 'app_framework' section in sysinv.conf. It is set to 'False' in de
code base to facilitate porting this change to previous releases, which
had the auto_update option disabled by default. A separate stx-puppet
change was done to set it to 'True' by default for the next releases:
https://review.opendev.org/c/starlingx/stx-puppet/+/911384
Test Plan:
PASS: AIO-SX fresh install.
PASS: Build platform-integ-apps without the 'upgrades' metadata
section.
Confirm that the default value was correctly inserted into the
'auto_update' field of the 'kube_app_bundle' database table after
a fresh install.
PASS: Change the default 'missing_auto_update' value in sysinv.conf.
Add a new version of platform-integ-apps without the 'upgrades'
metadata section to /usr/local/share/applications/helm/.
Restart sysinv-conductor.
Confirm that the 'auto_update' column for the new version matches
the new 'missing_auto_update' value.
Apply platform-integ-apps and confirm that the framework complies
with the new 'missing_auto_update' value.
Story: 2010929
Task: 49670
Change-Id: I068310bed70a5e1cf7e8668b2e673751276ed3a8
Signed-off-by: Igor Soares <Igor.PiresSoares@windriver.com>
