2018-10-17 15:14:32 -07:00
|
|
|
|
.. _simplex:
|
|
|
|
|
|
|
|
|
|
|
|
========================================================
|
|
|
|
|
|
StarlingX/Installation Guide Virtual Environment/Simplex
|
|
|
|
|
|
========================================================
|
|
|
|
|
|
|
|
|
|
|
|
-----------------
|
|
|
|
|
|
Preparing Servers
|
|
|
|
|
|
-----------------
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
**********
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Bare Metal
|
|
|
|
|
|
**********
|
|
|
|
|
|
|
|
|
|
|
|
Required Server:
|
|
|
|
|
|
|
|
|
|
|
|
- Combined Server (Controller + Compute): 1
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Hardware Requirements
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
The recommended minimum requirements for the physical servers where
|
|
|
|
|
|
StarlingX Simplex will be deployed, include:
|
|
|
|
|
|
|
|
|
|
|
|
- ‘Minimum’ Processor:
|
|
|
|
|
|
|
|
|
|
|
|
- Dual-CPU Intel® Xeon® E5 26xx Family (SandyBridge) 8 cores/socket
|
|
|
|
|
|
|
|
|
|
|
|
- Memory: 64 GB
|
|
|
|
|
|
- BIOS:
|
|
|
|
|
|
|
|
|
|
|
|
- Hyper-Threading Tech: Enabled
|
|
|
|
|
|
- Virtualization Technology: Enabled
|
|
|
|
|
|
- VT for Directed I/O: Enabled
|
|
|
|
|
|
- CPU Power and Performance Policy: Performance
|
|
|
|
|
|
- CPU C State Control: Disabled
|
|
|
|
|
|
- Plug & Play BMC Detection: Disabled
|
|
|
|
|
|
|
|
|
|
|
|
- Primary Disk:
|
|
|
|
|
|
|
|
|
|
|
|
- 500 GB SDD or NVMe
|
|
|
|
|
|
|
|
|
|
|
|
- Additional Disks:
|
|
|
|
|
|
|
|
|
|
|
|
- 1 or more 500 GB disks (min. 10K RPM)
|
|
|
|
|
|
|
|
|
|
|
|
- Network Ports
|
|
|
|
|
|
|
|
|
|
|
|
- Management: 10GE
|
|
|
|
|
|
- OAM: 10GE
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
*******************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Virtual Environment
|
|
|
|
|
|
*******************
|
|
|
|
|
|
|
|
|
|
|
|
Run the libvirt qemu setup scripts. Setting up virtualized OAM and
|
|
|
|
|
|
Management networks:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
$ bash setup_network.sh
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Building xmls for definition of virtual servers:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
$ bash setup_allinone.sh -i <starlingx iso image>
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-10-22 07:28:21 -05:00
|
|
|
|
The xml server definitions that are created by the previous script are:
|
|
|
|
|
|
|
|
|
|
|
|
- controller-0
|
|
|
|
|
|
- controller-1
|
|
|
|
|
|
|
|
|
|
|
|
Only controller-0 will be provisioned.
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
2018-10-22 07:28:21 -05:00
|
|
|
|
Powering Up a Virtual Server
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
To power up a virtual server, run the following command:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
$ sudo virsh start <server-xml-name>
|
|
|
|
|
|
|
|
|
|
|
|
e.g.
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
$ sudo virsh start controller-0
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Accessing Virtual Server Consoles
|
|
|
|
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
|
|
|
|
|
|
|
|
The xml for virtual servers in stx-tools repo, deployment/libvirt,
|
|
|
|
|
|
provides both graphical and text consoles.
|
|
|
|
|
|
|
|
|
|
|
|
Access the graphical console in virt-manager by right-click on the
|
|
|
|
|
|
domain (the server) and selecting "Open".
|
|
|
|
|
|
|
|
|
|
|
|
Access the textual console with the command "virsh console $DOMAIN",
|
|
|
|
|
|
where DOMAIN is the name of the server shown in virsh.
|
|
|
|
|
|
|
|
|
|
|
|
When booting the controller-0 for the first time, both the serial and
|
|
|
|
|
|
graphical consoles will present the initial configuration menu for the
|
|
|
|
|
|
cluster. One can select serial or graphical console for controller-0.
|
|
|
|
|
|
For the other nodes however only serial is used, regardless of which
|
|
|
|
|
|
option is selected.
|
|
|
|
|
|
|
|
|
|
|
|
Open the graphic console on all servers before powering them on to
|
|
|
|
|
|
observe the boot device selection and PXI boot progress. Run "virsh
|
|
|
|
|
|
console $DOMAIN" command promptly after power on to see the initial boot
|
|
|
|
|
|
sequence which follows the boot device selection. One has a few seconds
|
|
|
|
|
|
to do this.
|
|
|
|
|
|
|
|
|
|
|
|
------------------------------
|
|
|
|
|
|
Controller-0 Host Installation
|
|
|
|
|
|
------------------------------
|
|
|
|
|
|
|
|
|
|
|
|
Installing controller-0 involves initializing a host with software and
|
|
|
|
|
|
then applying a bootstrap configuration from the command line. The
|
|
|
|
|
|
configured bootstrapped host becomes Controller-0.
|
|
|
|
|
|
|
|
|
|
|
|
Procedure:
|
|
|
|
|
|
|
|
|
|
|
|
#. Power on the server that will be controller-0 with the StarlingX ISO
|
|
|
|
|
|
on a USB in a bootable USB slot.
|
|
|
|
|
|
#. Configure the controller using the config_controller script.
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
*************************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Initializing Controller-0
|
|
|
|
|
|
*************************
|
|
|
|
|
|
|
|
|
|
|
|
This section describes how to initialize StarlingX in host Controller-0.
|
|
|
|
|
|
Except where noted, all the commands must be executed from a console of
|
|
|
|
|
|
the host.
|
|
|
|
|
|
|
|
|
|
|
|
Power on the host to be configured as Controller-0, with the StarlingX
|
|
|
|
|
|
ISO on a USB in a bootable USB slot. Wait for the console to show the
|
|
|
|
|
|
StarlingX ISO booting options:
|
|
|
|
|
|
|
|
|
|
|
|
- **All-in-one Controller Configuration**
|
|
|
|
|
|
|
|
|
|
|
|
- When the installer is loaded and the installer welcome screen
|
|
|
|
|
|
appears in the Controller-0 host, select the type of installation
|
|
|
|
|
|
"All-in-one Controller Configuration".
|
|
|
|
|
|
|
|
|
|
|
|
- **Graphical Console**
|
|
|
|
|
|
|
|
|
|
|
|
- Select the "Graphical Console" as the console to use during
|
|
|
|
|
|
installation.
|
|
|
|
|
|
|
|
|
|
|
|
- **Standard Security Boot Profile**
|
|
|
|
|
|
|
|
|
|
|
|
- Select "Standard Security Boot Profile" as the Security Profile.
|
|
|
|
|
|
|
|
|
|
|
|
Monitor the initialization. When it is complete, a reboot is initiated
|
|
|
|
|
|
on the Controller-0 host, briefly displays a GNU GRUB screen, and then
|
|
|
|
|
|
boots automatically into the StarlingX image.
|
|
|
|
|
|
|
|
|
|
|
|
Log into Controller-0 as user wrsroot, with password wrsroot. The
|
|
|
|
|
|
first time you log in as wrsroot, you are required to change your
|
|
|
|
|
|
password. Enter the current password (wrsroot):
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
Changing password for wrsroot.
|
|
|
|
|
|
(current) UNIX Password:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter a new password for the wrsroot account:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
New password:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter the new password again to confirm it:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
Retype new password:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Controller-0 is initialized with StarlingX, and is ready for
|
|
|
|
|
|
configuration.
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
************************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Configuring Controller-0
|
|
|
|
|
|
************************
|
|
|
|
|
|
|
|
|
|
|
|
This section describes how to perform the Controller-0 configuration
|
|
|
|
|
|
interactively just to bootstrap system with minimum critical data.
|
|
|
|
|
|
Except where noted, all the commands must be executed from the console
|
|
|
|
|
|
of the active controller (here assumed to be controller-0).
|
|
|
|
|
|
|
|
|
|
|
|
When run interactively, the config_controller script presents a series
|
|
|
|
|
|
of prompts for initial configuration of StarlingX:
|
|
|
|
|
|
|
|
|
|
|
|
- For the Virtual Environment, you can accept all the default values
|
|
|
|
|
|
immediately after ‘system date and time’.
|
|
|
|
|
|
- For a Physical Deployment, answer the bootstrap configuration
|
|
|
|
|
|
questions with answers applicable to your particular physical setup.
|
|
|
|
|
|
|
|
|
|
|
|
The script is used to configure the first controller in the StarlingX
|
|
|
|
|
|
cluster as controller-0. The prompts are grouped by configuration
|
|
|
|
|
|
area. To start the script interactively, use the following command
|
|
|
|
|
|
with no parameters:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
controller-0:~$ sudo config_controller
|
|
|
|
|
|
System Configuration
|
|
|
|
|
|
================
|
|
|
|
|
|
Enter ! at any prompt to abort...
|
|
|
|
|
|
...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Select [y] for System Date and Time:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
System date and time:
|
|
|
|
|
|
-----------------------------
|
|
|
|
|
|
|
|
|
|
|
|
Is the current date and time correct? [y/N]: y
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-10-22 07:28:21 -05:00
|
|
|
|
For System mode choose "simplex":
|
2018-10-17 15:14:32 -07:00
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
...
|
|
|
|
|
|
1) duplex-direct: two node-redundant configuration. Management and
|
|
|
|
|
|
infrastructure networks are directly connected to peer ports
|
|
|
|
|
|
2) duplex - two node redundant configuration
|
|
|
|
|
|
3) simplex - single node non-redundant configuration
|
|
|
|
|
|
System mode [duplex-direct]: 3
|
2018-10-22 07:28:21 -05:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
After System Date / Time and System mode:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Applying configuration (this will take several minutes):
|
|
|
|
|
|
|
|
|
|
|
|
01/08: Creating bootstrap configuration ... DONE
|
|
|
|
|
|
02/08: Applying bootstrap manifest ... DONE
|
|
|
|
|
|
03/08: Persisting local configuration ... DONE
|
|
|
|
|
|
04/08: Populating initial system inventory ... DONE
|
|
|
|
|
|
05:08: Creating system configuration ... DONE
|
|
|
|
|
|
06:08: Applying controller manifest ... DONE
|
|
|
|
|
|
07:08: Finalize controller configuration ... DONE
|
|
|
|
|
|
08:08: Waiting for service activation ... DONE
|
|
|
|
|
|
|
|
|
|
|
|
Configuration was applied
|
|
|
|
|
|
|
|
|
|
|
|
Please complete any out of service commissioning steps with system
|
|
|
|
|
|
commands and unlock controller to proceed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
After config_controller bootstrap configuration, REST API, CLI and
|
|
|
|
|
|
Horizon interfaces are enabled on the controller-0 OAM IP Address. The
|
|
|
|
|
|
remaining installation instructions will use the CLI.
|
|
|
|
|
|
|
|
|
|
|
|
---------------------------
|
|
|
|
|
|
Controller-0 Host Provision
|
|
|
|
|
|
---------------------------
|
|
|
|
|
|
|
|
|
|
|
|
On Controller-0, acquire Keystone administrative privileges:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
controller-0:~$ source /etc/nova/openrc
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
*********************************************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Configuring Provider Networks at Installation
|
|
|
|
|
|
*********************************************
|
|
|
|
|
|
|
|
|
|
|
|
Set up one provider network of the vlan type, named providernet-a:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ neutron providernet-create providernet-a --type=vlan
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ neutron providernet-range-create --name providernet-a-range1 --range 100-400 providernet-a
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
*****************************************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Providing Data Interfaces on Controller-0
|
|
|
|
|
|
*****************************************
|
|
|
|
|
|
|
|
|
|
|
|
List all interfaces
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-if-list -a controller-0
|
|
|
|
|
|
+--------------------------------------+---------+----------+...+------+--------------+------+---------+------------+..
|
|
|
|
|
|
| uuid | name | class |...| vlan | ports | uses | used by | attributes |..
|
|
|
|
|
|
| | | |...| id | | i/f | i/f | |..
|
|
|
|
|
|
+--------------------------------------+----------+---------+...+------+--------------+------+---------+------------+..
|
|
|
|
|
|
| 49fd8938-e76f-49f1-879e-83c431a9f1af | enp0s3 | platform |...| None | [u'enp0s3'] | [] | [] | MTU=1500 |..
|
|
|
|
|
|
| 8957bb2c-fec3-4e5d-b4ed-78071f9f781c | eth1000 | None |...| None | [u'eth1000'] | [] | [] | MTU=1500 |..
|
|
|
|
|
|
| bf6f4cad-1022-4dd7-962b-4d7c47d16d54 | eth1001 | None |...| None | [u'eth1001'] | [] | [] | MTU=1500 |..
|
|
|
|
|
|
| f59b9469-7702-4b46-bad5-683b95f0a1cb | enp0s8 | platform |...| None | [u'enp0s8'] | [] | [] | MTU=1500 |..
|
|
|
|
|
|
+--------------------------------------+---------+----------+...+------+--------------+------+---------+------------+..
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Configure the data interfaces
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-if-modify -c data controller-0 eth1000 -p providernet-a
|
|
|
|
|
|
+------------------+--------------------------------------+
|
|
|
|
|
|
| Property | Value |
|
|
|
|
|
|
+------------------+--------------------------------------+
|
|
|
|
|
|
| ifname | eth1000 |
|
|
|
|
|
|
| iftype | ethernet |
|
|
|
|
|
|
| ports | [u'eth1000'] |
|
|
|
|
|
|
| providernetworks | providernet-a |
|
|
|
|
|
|
| imac | 08:00:27:c4:ad:3e |
|
|
|
|
|
|
| imtu | 1500 |
|
|
|
|
|
|
| ifclass | data |
|
|
|
|
|
|
| aemode | None |
|
|
|
|
|
|
| schedpolicy | None |
|
|
|
|
|
|
| txhashpolicy | None |
|
|
|
|
|
|
| uuid | 8957bb2c-fec3-4e5d-b4ed-78071f9f781c |
|
|
|
|
|
|
| ihost_uuid | 9c332b27-6f22-433b-bf51-396371ac4608 |
|
|
|
|
|
|
| vlan_id | None |
|
|
|
|
|
|
| uses | [] |
|
|
|
|
|
|
| used_by | [] |
|
|
|
|
|
|
| created_at | 2018-08-28T12:50:51.820151+00:00 |
|
|
|
|
|
|
| updated_at | 2018-08-28T14:46:18.333109+00:00 |
|
|
|
|
|
|
| sriov_numvfs | 0 |
|
|
|
|
|
|
| ipv4_mode | disabled |
|
|
|
|
|
|
| ipv6_mode | disabled |
|
|
|
|
|
|
| accelerated | [True] |
|
|
|
|
|
|
+------------------+--------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
*************************************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Configuring Cinder on Controller Disk
|
|
|
|
|
|
*************************************
|
|
|
|
|
|
|
|
|
|
|
|
Review the available disk space and capacity and obtain the uuid of the
|
|
|
|
|
|
physical disk
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-disk-list controller-0
|
|
|
|
|
|
+--------------------------------------+-----------+---------+---------+---------+------------+...
|
|
|
|
|
|
| uuid | device_no | device_ | device_ | size_mi | available_ |...
|
|
|
|
|
|
| | de | num | type | b | mib |...
|
|
|
|
|
|
+--------------------------------------+-----------+---------+---------+---------+------------+...
|
|
|
|
|
|
| 6b42c9dc-f7c0-42f1-a410-6576f5f069f1 | /dev/sda | 2048 | HDD | 600000 | 434072 |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| 534352d8-fec2-4ca5-bda7-0e0abe5a8e17 | /dev/sdb | 2064 | HDD | 16240 | 16237 |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| 146195b2-f3d7-42f9-935d-057a53736929 | /dev/sdc | 2080 | HDD | 16240 | 16237 |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
+--------------------------------------+-----------+---------+---------+---------+------------+...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Create the 'cinder-volumes' local volume group
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-lvg-add controller-0 cinder-volumes
|
|
|
|
|
|
+-----------------+--------------------------------------+
|
|
|
|
|
|
| lvm_vg_name | cinder-volumes |
|
|
|
|
|
|
| vg_state | adding |
|
|
|
|
|
|
| uuid | 61cb5cd2-171e-4ef7-8228-915d3560cdc3 |
|
|
|
|
|
|
| ihost_uuid | 9c332b27-6f22-433b-bf51-396371ac4608 |
|
|
|
|
|
|
| lvm_vg_access | None |
|
|
|
|
|
|
| lvm_max_lv | 0 |
|
|
|
|
|
|
| lvm_cur_lv | 0 |
|
|
|
|
|
|
| lvm_max_pv | 0 |
|
|
|
|
|
|
| lvm_cur_pv | 0 |
|
|
|
|
|
|
| lvm_vg_size | 0.00 |
|
|
|
|
|
|
| lvm_vg_total_pe | 0 |
|
|
|
|
|
|
| lvm_vg_free_pe | 0 |
|
|
|
|
|
|
| created_at | 2018-08-28T13:45:20.218905+00:00 |
|
|
|
|
|
|
| updated_at | None |
|
|
|
|
|
|
| parameters | {u'lvm_type': u'thin'} |
|
|
|
|
|
|
+-----------------+--------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Create a disk partition to add to the volume group
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-disk-partition-add controller-0 534352d8-fec2-4ca5-bda7-0e0abe5a8e17 16237 -t lvm_phys_vol
|
|
|
|
|
|
+-------------+--------------------------------------------------+
|
|
|
|
|
|
| Property | Value |
|
|
|
|
|
|
+-------------+--------------------------------------------------+
|
|
|
|
|
|
| device_path | /dev/disk/by-path/pci-0000:00:0d.0-ata-2.0-part1 |
|
|
|
|
|
|
| device_node | /dev/sdb1 |
|
|
|
|
|
|
| type_guid | ba5eba11-0000-1111-2222-000000000001 |
|
|
|
|
|
|
| type_name | None |
|
|
|
|
|
|
| start_mib | None |
|
|
|
|
|
|
| end_mib | None |
|
|
|
|
|
|
| size_mib | 16237 |
|
|
|
|
|
|
| uuid | 0494615f-bd79-4490-84b9-dcebbe5f377a |
|
|
|
|
|
|
| ihost_uuid | 9c332b27-6f22-433b-bf51-396371ac4608 |
|
|
|
|
|
|
| idisk_uuid | 534352d8-fec2-4ca5-bda7-0e0abe5a8e17 |
|
|
|
|
|
|
| ipv_uuid | None |
|
|
|
|
|
|
| status | Creating |
|
|
|
|
|
|
| created_at | 2018-08-28T13:45:48.512226+00:00 |
|
|
|
|
|
|
| updated_at | None |
|
|
|
|
|
|
+-------------+--------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wait for the new partition to be created (i.e. status=Ready)
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-disk-partition-list controller-0 --disk 534352d8-fec2-4ca5-bda7-0e0abe5a8e17
|
|
|
|
|
|
+--------------------------------------+...+------------+...+---------------------+----------+--------+
|
|
|
|
|
|
| uuid |...| device_nod |...| type_name | size_mib | status |
|
|
|
|
|
|
| |...| e |...| | | |
|
|
|
|
|
|
+--------------------------------------+...+------------+...+---------------------+----------+--------+
|
|
|
|
|
|
| 0494615f-bd79-4490-84b9-dcebbe5f377a |...| /dev/sdb1 |...| LVM Physical Volume | 16237 | Ready |
|
|
|
|
|
|
| |...| |...| | | |
|
|
|
|
|
|
| |...| |...| | | |
|
|
|
|
|
|
+--------------------------------------+...+------------+...+---------------------+----------+--------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add the partition to the volume group
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-pv-add controller-0 cinder-volumes 0494615f-bd79-4490-84b9-dcebbe5f377a
|
|
|
|
|
|
+--------------------------+--------------------------------------------------+
|
|
|
|
|
|
| Property | Value |
|
|
|
|
|
|
+--------------------------+--------------------------------------------------+
|
|
|
|
|
|
| uuid | 9a0ad568-0ace-4d57-9e03-e7a63f609cf2 |
|
|
|
|
|
|
| pv_state | adding |
|
|
|
|
|
|
| pv_type | partition |
|
|
|
|
|
|
| disk_or_part_uuid | 0494615f-bd79-4490-84b9-dcebbe5f377a |
|
|
|
|
|
|
| disk_or_part_device_node | /dev/sdb1 |
|
|
|
|
|
|
| disk_or_part_device_path | /dev/disk/by-path/pci-0000:00:0d.0-ata-2.0-part1 |
|
|
|
|
|
|
| lvm_pv_name | /dev/sdb1 |
|
|
|
|
|
|
| lvm_vg_name | cinder-volumes |
|
|
|
|
|
|
| lvm_pv_uuid | None |
|
|
|
|
|
|
| lvm_pv_size | 0 |
|
|
|
|
|
|
| lvm_pe_total | 0 |
|
|
|
|
|
|
| lvm_pe_alloced | 0 |
|
|
|
|
|
|
| ihost_uuid | 9c332b27-6f22-433b-bf51-396371ac4608 |
|
|
|
|
|
|
| created_at | 2018-08-28T13:47:39.450763+00:00 |
|
|
|
|
|
|
| updated_at | None |
|
|
|
|
|
|
+--------------------------+--------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
*********************************************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Adding an LVM Storage Backend at Installation
|
|
|
|
|
|
*********************************************
|
|
|
|
|
|
|
|
|
|
|
|
Ensure requirements are met to add LVM storage
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system storage-backend-add lvm -s cinder
|
|
|
|
|
|
|
|
|
|
|
|
WARNING : THIS OPERATION IS NOT REVERSIBLE AND CANNOT BE CANCELLED.
|
|
|
|
|
|
|
|
|
|
|
|
By confirming this operation, the LVM backend will be created.
|
|
|
|
|
|
|
|
|
|
|
|
Please refer to the system admin guide for minimum spec for LVM
|
|
|
|
|
|
storage. Set the 'confirmed' field to execute this operation
|
|
|
|
|
|
for the lvm backend.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add the LVM storage backend
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system storage-backend-add lvm -s cinder --confirmed
|
|
|
|
|
|
|
|
|
|
|
|
System configuration has changed.
|
|
|
|
|
|
Please follow the administrator guide to complete configuring the system.
|
|
|
|
|
|
|
|
|
|
|
|
+--------------------------------------+------------+---------+-------------+...+----------+--------------+
|
|
|
|
|
|
| uuid | name | backend | state |...| services | capabilities |
|
|
|
|
|
|
+--------------------------------------+------------+---------+-------------+...+----------+--------------+
|
|
|
|
|
|
| 6d750a68-115a-4c26-adf4-58d6e358a00d | file-store | file | configured |...| glance | {} |
|
|
|
|
|
|
| e2697426-2d79-4a83-beb7-2eafa9ceaee5 | lvm-store | lvm | configuring |...| cinder | {} |
|
|
|
|
|
|
+--------------------------------------+------------+---------+-------------+...+----------+--------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wait for the LVM storage backend to be configured (i.e.
|
|
|
|
|
|
state=Configured)
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system storage-backend-list
|
|
|
|
|
|
+--------------------------------------+------------+---------+------------+------+----------+--------------+
|
|
|
|
|
|
| uuid | name | backend | state | task | services | capabilities |
|
|
|
|
|
|
+--------------------------------------+------------+---------+------------+------+----------+--------------+
|
|
|
|
|
|
| 6d750a68-115a-4c26-adf4-58d6e358a00d | file-store | file | configured | None | glance | {} |
|
|
|
|
|
|
| e2697426-2d79-4a83-beb7-2eafa9ceaee5 | lvm-store | lvm | configured | None | cinder | {} |
|
|
|
|
|
|
+--------------------------------------+------------+---------+------------+------+----------+--------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
***********************************************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Configuring VM Local Storage on Controller Disk
|
|
|
|
|
|
***********************************************
|
|
|
|
|
|
|
|
|
|
|
|
Review the available disk space and capacity and obtain the uuid of the
|
|
|
|
|
|
physical disk
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-disk-list controller-0
|
|
|
|
|
|
+--------------------------------------+-----------+---------+---------+---------+------------+...
|
|
|
|
|
|
| uuid | device_no | device_ | device_ | size_mi | available_ |...
|
|
|
|
|
|
| | de | num | type | b | mib |...
|
|
|
|
|
|
+--------------------------------------+-----------+---------+---------+---------+------------+...
|
|
|
|
|
|
| 6b42c9dc-f7c0-42f1-a410-6576f5f069f1 | /dev/sda | 2048 | HDD | 600000 | 434072 |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| 534352d8-fec2-4ca5-bda7-0e0abe5a8e17 | /dev/sdb | 2064 | HDD | 16240 | 0 |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| 146195b2-f3d7-42f9-935d-057a53736929 | /dev/sdc | 2080 | HDD | 16240 | 16237 |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
| | | | | | |...
|
|
|
|
|
|
+--------------------------------------+-----------+---------+---------+---------+------------+...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Create the 'noval-local' volume group
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-lvg-add controller-0 nova-local
|
|
|
|
|
|
+-----------------+-------------------------------------------------------------------+
|
|
|
|
|
|
| Property | Value |
|
|
|
|
|
|
+-----------------+-------------------------------------------------------------------+
|
|
|
|
|
|
| lvm_vg_name | nova-local |
|
|
|
|
|
|
| vg_state | adding |
|
|
|
|
|
|
| uuid | 517d313e-8aa0-4b4d-92e6-774b9085f336 |
|
|
|
|
|
|
| ihost_uuid | 9c332b27-6f22-433b-bf51-396371ac4608 |
|
|
|
|
|
|
| lvm_vg_access | None |
|
|
|
|
|
|
| lvm_max_lv | 0 |
|
|
|
|
|
|
| lvm_cur_lv | 0 |
|
|
|
|
|
|
| lvm_max_pv | 0 |
|
|
|
|
|
|
| lvm_cur_pv | 0 |
|
|
|
|
|
|
| lvm_vg_size | 0.00 |
|
|
|
|
|
|
| lvm_vg_total_pe | 0 |
|
|
|
|
|
|
| lvm_vg_free_pe | 0 |
|
|
|
|
|
|
| created_at | 2018-08-28T14:02:58.486716+00:00 |
|
|
|
|
|
|
| updated_at | None |
|
|
|
|
|
|
| parameters | {u'concurrent_disk_operations': 2, u'instance_backing': u'image'} |
|
|
|
|
|
|
+-----------------+-------------------------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Create a disk partition to add to the volume group
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-disk-partition-add controller-0 146195b2-f3d7-42f9-935d-057a53736929 16237 -t lvm_phys_vol
|
|
|
|
|
|
+-------------+--------------------------------------------------+
|
|
|
|
|
|
| Property | Value |
|
|
|
|
|
|
+-------------+--------------------------------------------------+
|
|
|
|
|
|
| device_path | /dev/disk/by-path/pci-0000:00:0d.0-ata-3.0-part1 |
|
|
|
|
|
|
| device_node | /dev/sdc1 |
|
|
|
|
|
|
| type_guid | ba5eba11-0000-1111-2222-000000000001 |
|
|
|
|
|
|
| type_name | None |
|
|
|
|
|
|
| start_mib | None |
|
|
|
|
|
|
| end_mib | None |
|
|
|
|
|
|
| size_mib | 16237 |
|
|
|
|
|
|
| uuid | 009ce3b1-ed07-46e9-9560-9d2371676748 |
|
|
|
|
|
|
| ihost_uuid | 9c332b27-6f22-433b-bf51-396371ac4608 |
|
|
|
|
|
|
| idisk_uuid | 146195b2-f3d7-42f9-935d-057a53736929 |
|
|
|
|
|
|
| ipv_uuid | None |
|
|
|
|
|
|
| status | Creating |
|
|
|
|
|
|
| created_at | 2018-08-28T14:04:29.714030+00:00 |
|
|
|
|
|
|
| updated_at | None |
|
|
|
|
|
|
+-------------+--------------------------------------------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wait for the new partition to be created (i.e. status=Ready)
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-disk-partition-list controller-0 --disk 146195b2-f3d7-42f9-935d-057a53736929
|
|
|
|
|
|
+--------------------------------------+...+------------+...+---------------------+----------+--------+
|
|
|
|
|
|
| uuid |...| device_nod |...| type_name | size_mib | status |
|
|
|
|
|
|
| |...| e |...| | | |
|
|
|
|
|
|
+--------------------------------------+...+------------+...+---------------------+----------+--------+
|
|
|
|
|
|
| 009ce3b1-ed07-46e9-9560-9d2371676748 |...| /dev/sdc1 |...| LVM Physical Volume | 16237 | Ready |
|
|
|
|
|
|
| |...| |...| | | |
|
|
|
|
|
|
| |...| |...| | | |
|
|
|
|
|
|
+--------------------------------------+...+------------+...+---------------------+----------+--------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add the partition to the volume group
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-pv-add controller-0 nova-local 009ce3b1-ed07-46e9-9560-9d2371676748
|
|
|
|
|
|
+--------------------------+--------------------------------------------------+
|
|
|
|
|
|
| Property | Value |
|
|
|
|
|
|
+--------------------------+--------------------------------------------------+
|
|
|
|
|
|
| uuid | 830c9dc8-c71a-4cb2-83be-c4d955ef4f6b |
|
|
|
|
|
|
| pv_state | adding |
|
|
|
|
|
|
| pv_type | partition |
|
|
|
|
|
|
| disk_or_part_uuid | 009ce3b1-ed07-46e9-9560-9d2371676748 |
|
|
|
|
|
|
| disk_or_part_device_node | /dev/sdc1 |
|
|
|
|
|
|
| disk_or_part_device_path | /dev/disk/by-path/pci-0000:00:0d.0-ata-3.0-part1 |
|
|
|
|
|
|
| lvm_pv_name | /dev/sdc1 |
|
|
|
|
|
|
| lvm_vg_name | nova-local |
|
|
|
|
|
|
| lvm_pv_uuid | None |
|
|
|
|
|
|
| lvm_pv_size | 0 |
|
|
|
|
|
|
| lvm_pe_total | 0 |
|
|
|
|
|
|
| lvm_pe_alloced | 0 |
|
|
|
|
|
|
| ihost_uuid | 9c332b27-6f22-433b-bf51-396371ac4608 |
|
|
|
|
|
|
| created_at | 2018-08-28T14:06:05.705546+00:00 |
|
|
|
|
|
|
| updated_at | None |
|
|
|
|
|
|
+--------------------------+--------------------------------------------------+
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
**********************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Unlocking Controller-0
|
|
|
|
|
|
**********************
|
|
|
|
|
|
|
|
|
|
|
|
You must unlock controller-0 so that you can use it to install
|
|
|
|
|
|
Controller-1. Use the system host-unlock command:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-unlock controller-0
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The host is rebooted. During the reboot, the command line is
|
|
|
|
|
|
unavailable, and any ssh connections are dropped. To monitor the
|
|
|
|
|
|
progress of the reboot, use the controller-0 console.
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
****************************************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
Verifying the Controller-0 Configuration
|
|
|
|
|
|
****************************************
|
|
|
|
|
|
|
|
|
|
|
|
On Controller-0, acquire Keystone administrative privileges:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
controller-0:~$ source /etc/nova/openrc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Verify that the controller-0 services are running:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system service-list
|
|
|
|
|
|
+-----+-------------------------------+--------------+----------------+
|
|
|
|
|
|
| id | service_name | hostname | state |
|
|
|
|
|
|
+-----+-------------------------------+--------------+----------------+
|
|
|
|
|
|
...
|
|
|
|
|
|
| 1 | oam-ip | controller-0 | enabled-active |
|
|
|
|
|
|
| 2 | management-ip | controller-0 | enabled-active |
|
|
|
|
|
|
...
|
|
|
|
|
|
+-----+-------------------------------+--------------+----------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Verify that controller-0 has controller and compute subfunctions
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-show 1 | grep subfunctions
|
|
|
|
|
|
| subfunctions | controller,compute |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Verify that controller-0 is unlocked, enabled, and available:
|
|
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
|
|
[wrsroot@controller-0 ~(keystone_admin)]$ system host-list
|
|
|
|
|
|
+----+--------------+-------------+----------------+-------------+--------------+
|
|
|
|
|
|
| id | hostname | personality | administrative | operational | availability |
|
|
|
|
|
|
+----+--------------+-------------+----------------+-------------+--------------+
|
|
|
|
|
|
| 1 | controller-0 | controller | unlocked | enabled | available |
|
|
|
|
|
|
+----+--------------+-------------+----------------+-------------+--------------+
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-11-12 15:37:24 -08:00
|
|
|
|
*****************
|
2018-10-17 15:14:32 -07:00
|
|
|
|
System Alarm List
|
|
|
|
|
|
*****************
|
|
|
|
|
|
|
|
|
|
|
|
When all nodes are Unlocked, Enabled and Available: check 'fm alarm-list' for issues.
|
|
|
|
|
|
|
|
|
|
|
|
Your StarlingX deployment is now up and running with 1 Controller with Cinder Storage
|
|
|
|
|
|
and all OpenStack services up and running. You can now proceed with standard OpenStack
|
|
|
|
|
|
APIs, CLIs and/or Horizon to load Glance Images, configure Nova Flavors, configure
|
|
|
|
|
|
Neutron networks and launch Nova Virtual Machines.
|
