starlingx/docs
Code Issues Proposed changes

Dist. Cloud edits (r6, dsr6)

Browse Source 
Copy edits for typos, markup and other technical issues.
Fix label in :ref:
Fix gerund mismatch.

Signed-off-by: Ron Stone <ronald.stone@windriver.com>
Change-Id: Ie6dd03f0af3ff9d7ace7efe0f61479dfee7dc1ba
This commit is contained in:
Ron Stone 2022-08-18 06:34:53 -04:00 committed by Juanita-Balaraj
parent 126131ce63
commit d7a2a00182
15 changed files with 67 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
doc/source/dist_cloud/kubernetes/apply-the-firmware-update-strategy-using-horizon-e78bf11c7189.rst
View File

@ -29,7 +29,3 @@ Update Orchestration.
subcloud, use the **Host Inventory** page on the subcloud. subcloud, use the **Host Inventory** page on the subcloud.
.. rubric:: |result|
.. procedure results here

8
doc/source/dist_cloud/kubernetes/creating-subcloud-groups.rst
View File

@ -11,10 +11,10 @@ be added to the 'Default' group, unless a different subcloud group has been
specified. specified.
A subcloud can be moved to a different subcloud group using the A subcloud can be moved to a different subcloud group using the
'dcmanager subcloud update' command for the group attribute. A subcloud group :command:`dcmanager subcloud update` command for the group attribute. A
cannot be deleted if it contains any subclouds. Removing a subcloud from a subcloud group cannot be deleted if it contains any subclouds. Removing a
subcloud group is done by moving the subcloud back to the 'Default' subcloud subcloud from a subcloud group is done by moving the subcloud back to the
group. 'Default' subcloud group.
.. rubric:: |context| .. rubric:: |context|

26
doc/source/dist_cloud/kubernetes/installing-a-subcloud-using-redfish-platform-management-service.rst
View File

@ -31,8 +31,8 @@ subcloud, the subcloud installation has these phases:
After a successful remote installation of a subcloud in a Distributed Cloud After a successful remote installation of a subcloud in a Distributed Cloud
system, a subsequent remote reinstallation fails because of an existing ssh system, a subsequent remote reinstallation fails because of an existing ssh
key entry in the /root/.ssh/known_hosts on the System Controller. In this key entry in the ``/root/.ssh/known_hosts`` on the System Controller. In this
case, delete the host key entry, if present, from /root/.ssh/known_hosts case, delete the host key entry, if present, from ``/root/.ssh/known_hosts``
on the System Controller before doing reinstallations. on the System Controller before doing reinstallations.
.. rubric:: |prereq| .. rubric:: |prereq|
@ -40,14 +40,14 @@ subcloud, the subcloud installation has these phases:
.. _installing-a-subcloud-using-redfish-platform-management-service-ul-g5j-3f3-qjb: .. _installing-a-subcloud-using-redfish-platform-management-service-ul-g5j-3f3-qjb:
- The docker **rvmc** image needs to be added to the System Controller - The docker **rvmc** image needs to be added to the System Controller
bootstrap override file, docker.io/starlingx/rvmc:stx.5.0-v1.0.0. bootstrap override file, ``docker.io/starlingx/rvmc:stx.5.0-v1.0.0``.
- A new system CLI option ``--active`` is added to the - A new system CLI option ``--active`` is added to the
:command:`load-import` command to allow the import into the :command:`load-import` command to allow the import into the
System Controller /opt/dc-vault/loads. The purpose of this is to allow System Controller ``/opt/dc-vault/loads``. The purpose of this is to allow
Redfish install of subclouds referencing a single full copy of the Redfish install of subclouds referencing a single full copy of the
**bootimage.iso** at /opt/dc-vault/loads. \(Previously, the full ``bootimage.iso`` at ``/opt/dc-vault/loads``. \(Previously, the full
**bootimage.iso** was duplicated for each :command:`subcloud add` ``bootimage.iso`` was duplicated for each :command:`subcloud add`
command\). command\).
.. note:: .. note::
@ -65,8 +65,8 @@ subcloud, the subcloud installation has these phases:
~(keystone_admin)]$ system --os-region-name SystemController load-import --active |installer-image-name|.iso |installer-image-name|.sig ~(keystone_admin)]$ system --os-region-name SystemController load-import --active |installer-image-name|.iso |installer-image-name|.sig
In order to be able to deploy subclouds from either controller, all local In order to be able to deploy subclouds from either controller, all local
files that are referenced in the **bootstrap.yml** file must exist on both files that are referenced in the ``bootstrap.yml`` file must exist on both
controllers \(for example, /home/sysadmin/docker-registry-ca-cert.pem\). controllers (for example, ``/home/sysadmin/docker-registry-ca-cert.pem``).
.. _increase-subcloud-platform-backup-size: .. _increase-subcloud-platform-backup-size:
@ -89,8 +89,8 @@ subcloud reinstall using the following commands:
~(keystone_admin)]$ dcmanager subcloud update --install-values <install-values-yaml-file><subcloud-name> ~(keystone_admin)]$ dcmanager subcloud update --install-values <install-values-yaml-file><subcloud-name>
For a new subcloud deployment, use the :command:`dcmanager subcloud add` For a new subcloud deployment, use the :command:`dcmanager subcloud add`
command with the install-values.yaml file containing the desired command with the ``install-values.yaml`` file containing the desired
**persistent_size** value. ``persistent_size`` value.
.. rubric:: |proc| .. rubric:: |proc|
@ -116,7 +116,7 @@ command with the install-values.yaml file containing the desired
:start-after: begin-ref-1 :start-after: begin-ref-1
:end-before: end-ref-1 :end-before: end-ref-1
#. Create the install-values.yaml file and use the content to pass the file #. Create the ``install-values.yaml`` file and use the content to pass the file
into the :command:`dcmanager subcloud add` command, using the into the :command:`dcmanager subcloud add` command, using the
``--install-values`` command option. ``--install-values`` command option.
@ -309,7 +309,7 @@ command with the install-values.yaml file containing the desired
**Pre-Install** **Pre-Install**
This status indicates that the ISO for the subcloud is being updated by This status indicates that the ISO for the subcloud is being updated by
the Central Cloud with the boot menu parameters, and kickstart the Central Cloud with the boot menu parameters, and kickstart
configuration as specified in the install-values.yaml file. configuration as specified in the ``install-values.yaml`` file.
**Installing** **Installing**
This status indicates that the subcloud's ISO is being installed from This status indicates that the subcloud's ISO is being installed from
@ -386,7 +386,7 @@ command with the install-values.yaml file containing the desired
{SECRET_UUID} | awk '{print $2}'' {SECRET_UUID} | awk '{print $2}''
openstack secret get ${SECRET_REF} --payload -f value openstack secret get ${SECRET_REF} --payload -f value
The secret payload should be, "username: sysinv password:<password>". If The secret payload should be, ``username: sysinv password:<password>``. If
the secret payload is, "username: admin password:<password>", see, the secret payload is, "username: admin password:<password>", see,
:ref:`Updating Docker Registry Credentials on a Subcloud :ref:`Updating Docker Registry Credentials on a Subcloud
<updating-docker-registry-credentials-on-a-subcloud>` for more information. <updating-docker-registry-credentials-on-a-subcloud>` for more information.

28
doc/source/dist_cloud/kubernetes/installing-a-subcloud-without-redfish-platform-management-service.rst
View File

@ -22,7 +22,7 @@ subcloud, the subcloud installation process has two phases:
.. _installing-a-subcloud-without-redfish-platform-management-service-ul-fmx-jpl-mkb: .. _installing-a-subcloud-without-redfish-platform-management-service-ul-fmx-jpl-mkb:
- Installing the ISO on controller-0; this is done locally at the subcloud by - Installing the ISO on controller-0; this is done locally at the subcloud by
using either, a bootable USB device, or a local PXE boot server using either, a bootable USB device, or a local |PXE| boot server
- Executing the :command:`dcmanager subcloud add` command in the Central - Executing the :command:`dcmanager subcloud add` command in the Central
Cloud that uses Ansible to bootstrap |prod-long| on controller-0 in Cloud that uses Ansible to bootstrap |prod-long| on controller-0 in
@ -33,8 +33,8 @@ subcloud, the subcloud installation process has two phases:
After a successful remote installation of a subcloud in a Distributed Cloud After a successful remote installation of a subcloud in a Distributed Cloud
system, a subsequent remote reinstallation fails because of an existing ssh system, a subsequent remote reinstallation fails because of an existing ssh
key entry in the /root/.ssh/known\_hosts on the System Controller. In this key entry in the ``/root/.ssh/known_hosts`` on the System Controller. In this
case, delete the host key entry, if present, from /root/.ssh/known\_hosts case, delete the host key entry, if present, from ``/root/.ssh/known_hosts``
on the System Controller before doing reinstallations. on the System Controller before doing reinstallations.
.. rubric:: |prereq| .. rubric:: |prereq|
@ -50,7 +50,7 @@ subcloud, the subcloud installation process has two phases:
- You must have downloaded ``update-iso.sh`` from |dnload-loc|. - You must have downloaded ``update-iso.sh`` from |dnload-loc|.
- In order to be able to deploy subclouds from either controller, all local - In order to be able to deploy subclouds from either controller, all local
files that are referenced in the **bootstrap.yml** file must exist on both files that are referenced in the ``bootstrap.yml`` file must exist on both
controllers \(for example, ``/home/sysadmin/docker-registry-ca-cert.pem``\). controllers \(for example, ``/home/sysadmin/docker-registry-ca-cert.pem``\).
.. rubric:: |proc| .. rubric:: |proc|
@ -62,7 +62,7 @@ subcloud, the subcloud installation process has two phases:
The servers require connectivity to a gateway router that provides IP The servers require connectivity to a gateway router that provides IP
routing between the subcloud management subnet and the System routing between the subcloud management subnet and the System
Controller management subnet, and between the subcloud OAM subnet and Controller management subnet, and between the subcloud |OAM| subnet and
the System Controller subnet. the System Controller subnet.
.. include:: /_includes/installing-a-subcloud-without-redfish-platform-management-service.rest .. include:: /_includes/installing-a-subcloud-without-redfish-platform-management-service.rest
@ -110,9 +110,9 @@ subcloud, the subcloud installation process has two phases:
Specify boot menu timeout, in seconds Specify boot menu timeout, in seconds
The following example ks-addon.cfg, used with the -a option, sets up an The following example ``ks-addon.cfg`` file, used with the -a option,
initial IP interface at boot time by defining a |VLAN| on an Ethernet sets up an initial IP interface at boot time by defining a |VLAN| on
interface and has it use DHCP to request an IP address: an Ethernet interface and has it use |DHCP| to request an IP address:
.. code-block:: none .. code-block:: none
@ -197,7 +197,7 @@ subcloud, the subcloud installation process has two phases:
type: docker type: docker
Where <sysinv\_password\> can be found by running the following command Where <sysinv_password\> can be found by running the following command
as 'sysadmin' on the Central Cloud: as 'sysadmin' on the Central Cloud:
.. code-block:: none .. code-block:: none
@ -206,8 +206,8 @@ subcloud, the subcloud installation process has two phases:
This configuration uses the local registry on your central cloud. If you This configuration uses the local registry on your central cloud. If you
prefer to use the default external registries, make the following prefer to use the default external registries, make the following
substitutions for the **docker\_registries** and substitutions for the ``docker_registries`` and
**additional\_local\_registry\_images** sections of the file. ``additional_local_registry_images`` sections of the file.
.. code-block:: none .. code-block:: none
@ -223,10 +223,10 @@ subcloud, the subcloud installation process has two phases:
#. You can use the Central Cloud's local registry to pull images on subclouds. #. You can use the Central Cloud's local registry to pull images on subclouds.
The Central Cloud's local registry's HTTPS certificate must have the The Central Cloud's local registry's HTTPS certificate must have the
Central Cloud's |OAM| IP, **registry.local** and **registry.central** in the Central Cloud's |OAM| IP, ``registry.local`` and ``registry.central`` in the
certificate's |SAN| list. For example, a valid certificate contains a |SAN| certificate's |SAN| list. For example, a valid certificate contains a |SAN|
list **"DNS.1: registry.local DNS.2: registry.central IP.1: <floating list ``"DNS.1: registry.local DNS.2: registry.central IP.1: <floating
management\> IP.2: <floating OAM\>"**. management\> IP.2: <floating OAM\>"``.
If required, run the following command on the Central Cloud prior to If required, run the following command on the Central Cloud prior to
bootstrapping the subcloud to install the new certificate for the Central bootstrapping the subcloud to install the new certificate for the Central

8
doc/source/dist_cloud/kubernetes/installing-and-provisioning-the-central-cloud.rst
View File

@ -34,19 +34,19 @@ modifications noted above and below.
You will also need to make the following modifications: You will also need to make the following modifications:
- when creating the user configuration overrides for the Ansible bootstrap - when creating the user configuration overrides for the Ansible bootstrap
playbook in /home/sysadmin/localhost.yml playbook in ``/home/sysadmin/localhost.yml``
- Add the parameters shown in bold below to your /home/sysadmin/localhost.yml - Add the parameters shown in bold below to your ``/home/sysadmin/localhost.yml``
Ansible bootstrap override file to indicate that this cloud will play Ansible bootstrap override file to indicate that this cloud will play
the role of the Central Cloud / System Controller. the role of the Central Cloud / System Controller.
- restrict the range of addresses for the management network (using - restrict the range of addresses for the management network (using
management_start_address and management_end_address, as shown below) to ``management_start_address`` and ``management_end_address``, as shown below) to
exclude the IP addresses reserved for gateway routers that provide routing exclude the IP addresses reserved for gateway routers that provide routing
to the subclouds' management subnets. to the subclouds' management subnets.
- Also, include the container images shown in bold below in - Also, include the container images shown in bold below in
additional\_local\_registry\_images, required for support of subcloud ``additional_local_registry_images``, required for support of subcloud
installs with the Redfish Platform Management Service, and subcloud installs installs with the Redfish Platform Management Service, and subcloud installs
using a Ceph storage backend. using a Ceph storage backend.

4
doc/source/dist_cloud/kubernetes/managing-subclouds-using-the-cli.rst
View File

@ -128,12 +128,12 @@ fails, delete subclouds, and monitor or change the managed status of subclouds.
- To reconfigure a subcloud, if deployment fails, use the :command:`subcloud reconfig` command. - To reconfigure a subcloud, if deployment fails, use the :command:`subcloud reconfig` command.
.. note:: .. note::
You can enter the sysadmin password to avoid being prompted for the password. You can enter the ``sysadmin`` password to avoid being prompted for the password.
.. code-block:: none .. code-block:: none
~(keystone_admin)]$ dcmanager subcloud reconfig <subcloud-id/name> --deploy-config \ ~(keystone_admin)]$ dcmanager subcloud reconfig <subcloud-id/name> --deploy-config \
<<filepath>> --sysadmin-password <<password>> <filepath> --sysadmin-password <<password>>
where ``--deploy-config`` must reference the deployment configuration file. where ``--deploy-config`` must reference the deployment configuration file.

6
doc/source/dist_cloud/kubernetes/rehoming-a-subcloud.rst
View File

@ -58,11 +58,11 @@ There are six phases for Rehoming a subcloud:
- Ensure that the subcloud has been backed up, in case something goes wrong - Ensure that the subcloud has been backed up, in case something goes wrong
and a subcloud system recovery is required. and a subcloud system recovery is required.
- Transfer the yaml file that was used to bootstrap the subcloud prior to - Transfer the ``yaml`` file that was used to bootstrap the subcloud prior to
rehoming, to the new System Controller. This data is required for rehoming. rehoming, to the new System Controller. This data is required for rehoming.
- If the subcloud can be remotely installed via Redfish Virtual Media service, - If the subcloud can be remotely installed via Redfish Virtual Media service,
transfer the yaml file that contains the install data for this subcloud, transfer the ``yaml`` file that contains the install data for this subcloud,
and use this install data in the new System Controller, via the and use this install data in the new System Controller, via the
``--install-values`` option, when running the remote subcloud reinstall, ``--install-values`` option, when running the remote subcloud reinstall,
upgrade or restore commands. upgrade or restore commands.
@ -83,7 +83,7 @@ There are six phases for Rehoming a subcloud:
#. Ensure that the subcloud's bootstrap values file is available on the new #. Ensure that the subcloud's bootstrap values file is available on the new
System Controller. If required, in the subcloud's bootstrap values file System Controller. If required, in the subcloud's bootstrap values file
update the **systemcontroller_gateway_address** entry to point to the update the ``systemcontroller_gateway_address`` entry to point to the
appropriate network gateway for the new System Controller to communicate appropriate network gateway for the new System Controller to communicate
with the subcloud. with the subcloud.

2
doc/source/dist_cloud/kubernetes/reinstalling-a-subcloud-with-redfish-platform-management-service.rst
View File

@ -147,7 +147,7 @@ Executing the dcmanager subcloud reinstall command in the Central Cloud:
bootstrapping by monitoring the following log file on the active bootstrapping by monitoring the following log file on the active
controller in the Central cloud: controller in the Central cloud:
- /var/log/dcmanager/ansible/subcloud1_playbook_output.log - ``/var/log/dcmanager/ansible/subcloud1_playbook_output.log``
#. After the subcloud is successfully reinstalled and bootstrapped, run the #. After the subcloud is successfully reinstalled and bootstrapped, run the
subcloud reconfig command to complete the process. The subcloud subcloud reconfig command to complete the process. The subcloud

6
doc/source/dist_cloud/kubernetes/restoring-subclouds-from-backupdata-using-dcmanager.rst
View File

@ -41,7 +41,7 @@ phases:
bootstrap or deployment. bootstrap or deployment.
- The platform backup tar file is already on the subcloud in - The platform backup tar file is already on the subcloud in
/opt/platform-backup directory or has been transferred to the ``/opt/platform-backup`` directory or has been transferred to the
SystemController. SystemController.
- The subcloud install values have been saved in the **dcmanager** database - The subcloud install values have been saved in the **dcmanager** database
@ -49,7 +49,7 @@ phases:
.. rubric:: |proc| .. rubric:: |proc|
#. Create the restore_values.yaml file which will be passed to the #. Create the ``restore_values.yaml`` file which will be passed to the
:command:`dcmanager subcloud restore` command using the ``--restore-values`` :command:`dcmanager subcloud restore` command using the ``--restore-values``
option. This file contains parameters that will be used during the platform option. This file contains parameters that will be used during the platform
restore phase. Minimally, the **backup_filename** parameter, indicating the restore phase. Minimally, the **backup_filename** parameter, indicating the
@ -95,7 +95,7 @@ phases:
+----+-----------+------------+--------------+---------------+---------+ +----+-----------+------------+--------------+---------------+---------+
#. In case of a failure, check the Ansible log for the corresponding subcloud #. In case of a failure, check the Ansible log for the corresponding subcloud
under /var/log/dcmanager/ansible directory. under ``/var/log/dcmanager/ansible`` directory.
#. When the subcloud deploy status changes to "complete", the controller-0 #. When the subcloud deploy status changes to "complete", the controller-0
is ready to be unlocked. Log into the controller-0 of the subcloud using is ready to be unlocked. Log into the controller-0 of the subcloud using

8
doc/source/dist_cloud/kubernetes/subcloud-deployment-with-local-installation-4982449058d5.rst
View File

@ -84,9 +84,9 @@ Container_image sets:
cb1b51f019c612178f14df6f03131a18 container-image1.tar.gz cb1b51f019c612178f14df6f03131a18 container-image1.tar.gz
db6c0ded6eb7bc2807edf8c345d4fe97 container-image2.tar.gz db6c0ded6eb7bc2807edf8c345d4fe97 container-image2.tar.gz
---------------------------------------------------- --------------------------------------------------
Creating the Prestaged ISO with gen-prestaged-iso.sh Create the Prestaged ISO with gen-prestaged-iso.sh
---------------------------------------------------- --------------------------------------------------
You can prepare and manually prestage the Install Bundle or use the You can prepare and manually prestage the Install Bundle or use the
``gen-prestaged-iso.sh`` tool to create a self-installing prestaging ISO image. ``gen-prestaged-iso.sh`` tool to create a self-installing prestaging ISO image.
@ -231,7 +231,7 @@ Use the ``--images`` option to specify the path/filename to a container image
to be installed on the subcloud. to be installed on the subcloud.
Use the ``--param`` option to specify the rootfs device and boot device to Use the ``--param`` option to specify the rootfs device and boot device to
install the prestaging image. The tool defaults to /dev/sda directory. Use this install the prestaging image. The tool defaults to ``/dev/sda directory``. Use this
option to override the default storage device the prestaging image is to be option to override the default storage device the prestaging image is to be
installed. installed.

2
doc/source/dist_cloud/kubernetes/switching-to-a-subcloud-from-the-system-controller.rst
View File

@ -13,7 +13,7 @@ You can access the Horizon Web interface for individual subclouds from the Syste
The System Controller page includes a menu for selecting subclouds or regions. The System Controller page includes a menu for selecting subclouds or regions.
When you select a subcloud from this menu, the view changes to show the Horizon When you select a subcloud from this menu, the view changes to show the Horizon
interface for the subcloud. You can use this to provision and manage the interface for the subcloud. You can use this to provision and manage the
subcloud hosts and networks, just as you would for any |prod| system subcloud hosts and networks, just as you would for any |prod| system.
.. rubric:: |proc| .. rubric:: |proc|

2
doc/source/dist_cloud/kubernetes/synchronization-monitoring-and-control.rst
View File

@ -30,7 +30,7 @@ subcloud is synchronized immediately when it is changed to the **Managed**
state. state.
Configuration changes made from the System Controller, and i.e. by specifying Configuration changes made from the System Controller, and i.e. by specifying
the --os-region-name option as **SystemController** are synchronized the ``--os-region-name`` option as ``SystemController`` are synchronized
immediately. For example, to add an |SNMP| trap destination and immediately immediately. For example, to add an |SNMP| trap destination and immediately
synchronize this configuration change to all subclouds in the **Managed** synchronize this configuration change to all subclouds in the **Managed**
state, use the following command: state, use the following command:

6
doc/source/dist_cloud/kubernetes/updating-docker-registry-credentials-on-a-subcloud.rst
View File

@ -13,20 +13,20 @@ This makes access to registry.central independent of changes to the Distributed
Cloud's Keystone admin user password. Cloud's Keystone admin user password.
Use the following procedure to update the install registry credentials on the Use the following procedure to update the install registry credentials on the
subcloud to the sysinv service credentials of the System Controller. subcloud to the ``sysinv`` service credentials of the System Controller.
.. rubric:: |proc| .. rubric:: |proc|
.. _updating-docker-registry-credentials-on-a-subcloud-steps-ywx-wyt-kmb: .. _updating-docker-registry-credentials-on-a-subcloud-steps-ywx-wyt-kmb:
#. On the System Controller, get the password for the sysinv services. #. On the System Controller, get the password for the ``sysinv`` services.
.. code-block:: none .. code-block:: none
$ keyring get sysinv services $ keyring get sysinv services
#. On each subcloud, run the following script to update the Docker registry #. On each subcloud, run the following script to update the Docker registry
credentials to sysinv: credentials to ``sysinv``:
.. code-block:: none .. code-block:: none

12
doc/source/dist_cloud/kubernetes/upgrading-the-systemcontroller-using-the-cli.rst
View File

@ -132,7 +132,7 @@ Follow the steps below to manually upgrade the System Controller:
- State entered after :command:`system upgrade-start` completes. - State entered after :command:`system upgrade-start` completes.
- Release nn.nn system data \(for example, postgres databases\) has - Release <nn.nn> system data \(for example, postgres databases\) has
been exported to be used in the upgrade. been exported to be used in the upgrade.
As part of the upgrade, the upgrade process checks the health of the system As part of the upgrade, the upgrade process checks the health of the system
@ -190,8 +190,8 @@ Follow the steps below to manually upgrade the System Controller:
- State entered when controller-1 upgrade is complete. - State entered when controller-1 upgrade is complete.
- System data has been successfully migrated from release nn.nn - System data has been successfully migrated from release <nn.nn>
to release nn.nn. to release <nn.nn>.
where *nn.nn* in the update file name is the |prod| release number. where *nn.nn* in the update file name is the |prod| release number.
@ -250,8 +250,8 @@ Follow the steps below to manually upgrade the System Controller:
If it transitions to **unlocked-disabled-failed**, check the issue If it transitions to **unlocked-disabled-failed**, check the issue
before proceeding to the next step. The alarms may indicate a before proceeding to the next step. The alarms may indicate a
configuration error. Check the result of the configuration logs on configuration error. Check the result of the configuration logs on
controller-1, \(for example, Error logs in controller-1, (for example, Error logs in
controller1:/var/log/puppet\). controller1:``/var/log/puppet``).
#. Run the :command:`system application-list`, and :command:`system #. Run the :command:`system application-list`, and :command:`system
host-upgrade-list` commands to view the current progress. host-upgrade-list` commands to view the current progress.
@ -301,7 +301,7 @@ Follow the steps below to manually upgrade the System Controller:
- upgrading-hosts: - upgrading-hosts:
- State entered when both controllers are running release nn.nn - State entered when both controllers are running release <nn.nn>
software. software.

15
doc/source/dist_cloud/kubernetes/uploading-and-applying-updates-to-systemcontroller-using-the-cli.rst
View File

@ -2,9 +2,9 @@
.. clv1558615616705 .. clv1558615616705
.. _uploading-and-applying-updates-to-systemcontroller-using-the-cli: .. _uploading-and-applying-updates-to-systemcontroller-using-the-cli:
============================================================= ==========================================================
Upload and Applying Updates to SystemController Using the CLI Upload and Apply Updates to SystemController Using the CLI
============================================================= ==========================================================
You can upload and apply updates to the SystemController in order to update the You can upload and apply updates to the SystemController in order to update the
central update repository, from the CLI using the standard update procedures central update repository, from the CLI using the standard update procedures
@ -18,9 +18,8 @@ If you prefer, you can use the Horizon Web interface. For more information, see
the specific procedure for incrementally uploading and applying one or more the specific procedure for incrementally uploading and applying one or more
patches for the SystemController is provided below. patches for the SystemController is provided below.
For standard |prod| updating procedures, see the For standard |prod| updating procedures, see the |updates-doc|:
:ref:`software-updates-and-upgrades-software-updates` guide.
.. xbooklink :ref:`|updates-doc| <software-updates-and-upgrades-software-updates>` guide.
For SystemController of |prod-dc| \(and the central update repository\), you For SystemController of |prod-dc| \(and the central update repository\), you
must include the additional |CLI| parameter ``--os-region-name`` with the value must include the additional |CLI| parameter ``--os-region-name`` with the value
@ -55,9 +54,9 @@ SystemController when using |CLI| :command:`sw-patch` commands.
#. Log in as the **sysadmin** user. #. Log in as the **sysadmin** user.
#. Copy all patches to be uploaded and applied to /home/sysadmin/patches/. #. Copy all patches to be uploaded and applied to ``/home/sysadmin/patches/``.
#. Upload all patches placed in /home/sysadmin/patches/ to the storage area. #. Upload all patches placed in ``/home/sysadmin/patches/`` to the storage area.
.. code-block:: none .. code-block:: none