From ebc686a1370ed40450356055b0f167bcf5604c04 Mon Sep 17 00:00:00 2001 From: Kristal Dale Date: Fri, 22 Nov 2019 15:19:24 -0800 Subject: [PATCH] Add NVMe info to R2 and R3 install guides - Add NVMe config info (same as R1) as common info for R2 and R3 - Clarify example command to add OSD for ceph (to clarify command is example, drive may be different for user depending on setup) Closes-Bug: 1853639 Change-Id: I9250842c9a0739016054746dce45b1f17d46172f Signed-off-by: Kristal Dale --- doc/source/deploy_install_guides/index.rst | 1 + .../deploy_install_guides/nvme_config.rst | 26 +++++++ .../bare_metal/aio_duplex_hardware.rst | 2 +- .../aio_duplex_install_kubernetes.rst | 3 +- .../bare_metal/aio_simplex_hardware.rst | 2 +- .../aio_simplex_install_kubernetes.rst | 3 +- .../controller_storage_hardware.rst | 3 +- .../controller_storage_install_kubernetes.rst | 4 +- .../bare_metal/dedicated_storage_hardware.rst | 71 ++++++++++--------- .../dedicated_storage_install_kubernetes.rst | 4 +- .../bare_metal/aio_duplex_hardware.rst | 2 +- .../aio_duplex_install_kubernetes.rst | 3 +- .../bare_metal/aio_simplex_hardware.rst | 2 +- .../aio_simplex_install_kubernetes.rst | 3 +- .../controller_storage_hardware.rst | 3 +- .../controller_storage_install_kubernetes.rst | 4 +- .../bare_metal/dedicated_storage_hardware.rst | 71 ++++++++++--------- .../dedicated_storage_install_kubernetes.rst | 4 +- 18 files changed, 123 insertions(+), 88 deletions(-) create mode 100644 doc/source/deploy_install_guides/nvme_config.rst diff --git a/doc/source/deploy_install_guides/index.rst b/doc/source/deploy_install_guides/index.rst index 1c3eb522d..8c6472f90 100755 --- a/doc/source/deploy_install_guides/index.rst +++ b/doc/source/deploy_install_guides/index.rst @@ -47,6 +47,7 @@ Archived releases :hidden: bootable_usb + nvme_config .. Making a new release diff --git a/doc/source/deploy_install_guides/nvme_config.rst b/doc/source/deploy_install_guides/nvme_config.rst new file mode 100644 index 000000000..11f39aadd --- /dev/null +++ b/doc/source/deploy_install_guides/nvme_config.rst @@ -0,0 +1,26 @@ +==================================== +Configure NVMe Drive as Primary Disk +==================================== + +To use a :abbr:`Non-Volatile Memory Express (NVMe)` drive as the primary disk for +any of your nodes, you must configure your host and adjust kernel parameters +during installation: + +#. Configure the host to be in UEFI mode. + +#. Edit the kernel boot parameter. + + After you are presented with the StarlingX ISO boot options and have selected + the preferred installation option (for example Standard Configuration or + All-in-One Controller Configuration), press the TAB key to edit the kernel + boot parameters. + + Modify the **boot_device** and **rootfs_device** from the default **sda** so + that it is the correct device name for the NVMe drive (for example "nvme0n1"). + + :: + + vmlinuz rootwait console=tty0 inst.text inst.stage2=hd:LABEL=oe_iso_boot + inst.ks=hd:LABEL=oe_iso_boot:/smallsystem_ks.cfg boot_device=nvme0n1 + rootfs_device=nvme0n1 biosdevname=0 usbcore.autosuspend=-1 inst.gpt + security_profile=standard user_namespace.enable=1 initrd=initrd.img diff --git a/doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_hardware.rst b/doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_hardware.rst index 1fc6ab451..dfd029ec7 100644 --- a/doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_hardware.rst +++ b/doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_hardware.rst @@ -31,7 +31,7 @@ host types are: +-------------------------+-----------------------------------------------------------+ | Minimum memory | 64 GB | +-------------------------+-----------------------------------------------------------+ -| Primary disk | 500 GB SDD or NVMe | +| Primary disk | 500 GB SDD or NVMe (see :doc:`../../nvme_config`) | +-------------------------+-----------------------------------------------------------+ | Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD | | | - Recommended, but not required: 1 or more SSDs or NVMe | diff --git a/doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_install_kubernetes.rst b/doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_install_kubernetes.rst index 91b761058..e785148fe 100644 --- a/doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_install_kubernetes.rst +++ b/doc/source/deploy_install_guides/r2_release/bare_metal/aio_duplex_install_kubernetes.rst @@ -220,7 +220,8 @@ Configure controller-0 system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0} system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1} -#. Add an OSD on controller-0 for ceph: +#. Add an OSD on controller-0 for ceph. The following example adds an OSD + to the `sdb` disk: :: diff --git a/doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_hardware.rst b/doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_hardware.rst index d01fa99c4..c2a3bb71b 100644 --- a/doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_hardware.rst +++ b/doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_hardware.rst @@ -31,7 +31,7 @@ host types are: +-------------------------+-----------------------------------------------------------+ | Minimum memory | 64 GB | +-------------------------+-----------------------------------------------------------+ -| Primary disk | 500 GB SDD or NVMe | +| Primary disk | 500 GB SDD or NVMe (see :doc:`../../nvme_config`) | +-------------------------+-----------------------------------------------------------+ | Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD | | | - Recommended, but not required: 1 or more SSDs or NVMe | diff --git a/doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_install_kubernetes.rst b/doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_install_kubernetes.rst index 0cf38eaa3..f2d5b206a 100644 --- a/doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_install_kubernetes.rst +++ b/doc/source/deploy_install_guides/r2_release/bare_metal/aio_simplex_install_kubernetes.rst @@ -227,7 +227,8 @@ Configure controller-0 system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0} system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1} -#. Add an OSD on controller-0 for ceph: +#. Add an OSD on controller-0 for ceph. The following example adds an OSD + to the `sdb` disk: :: diff --git a/doc/source/deploy_install_guides/r2_release/bare_metal/controller_storage_hardware.rst b/doc/source/deploy_install_guides/r2_release/bare_metal/controller_storage_hardware.rst index 0736fe749..0b1a46866 100644 --- a/doc/source/deploy_install_guides/r2_release/bare_metal/controller_storage_hardware.rst +++ b/doc/source/deploy_install_guides/r2_release/bare_metal/controller_storage_hardware.rst @@ -27,7 +27,8 @@ host types are: +-------------------------+-----------------------------+-----------------------------+ | Minimum memory | 64 GB | 32 GB | +-------------------------+-----------------------------+-----------------------------+ -| Primary disk | 500 GB SDD or NVMe | 120 GB (Minimum 10k RPM) | +| Primary disk | 500 GB SDD or NVMe (see | 120 GB (Minimum 10k RPM) | +| | :doc:`../../nvme_config`) | | +-------------------------+-----------------------------+-----------------------------+ | Additional disks | - 1 or more 500 GB (min. | - For OpenStack, recommend | | | 10K RPM) for Ceph OSD | 1 or more 500 GB (min. | diff --git a/doc/source/deploy_install_guides/r2_release/bare_metal/controller_storage_install_kubernetes.rst b/doc/source/deploy_install_guides/r2_release/bare_metal/controller_storage_install_kubernetes.rst index 37d2520d4..35ed0f6df 100644 --- a/doc/source/deploy_install_guides/r2_release/bare_metal/controller_storage_install_kubernetes.rst +++ b/doc/source/deploy_install_guides/r2_release/bare_metal/controller_storage_install_kubernetes.rst @@ -549,7 +549,7 @@ service. This can take 5-10 minutes, depending on the performance of the host ma Add Ceph OSDs to controllers ---------------------------- -#. Add OSDs to controller-0: +#. Add OSDs to controller-0. The following example adds OSDs to the `sdb` disk: :: @@ -564,7 +564,7 @@ Add Ceph OSDs to controllers system host-stor-list $HOST -#. Add OSDs to controller-1: +#. Add OSDs to controller-1. The following example adds OSDs to the `sdb` disk: :: diff --git a/doc/source/deploy_install_guides/r2_release/bare_metal/dedicated_storage_hardware.rst b/doc/source/deploy_install_guides/r2_release/bare_metal/dedicated_storage_hardware.rst index 124884725..9f8560822 100644 --- a/doc/source/deploy_install_guides/r2_release/bare_metal/dedicated_storage_hardware.rst +++ b/doc/source/deploy_install_guides/r2_release/bare_metal/dedicated_storage_hardware.rst @@ -17,41 +17,42 @@ Minimum hardware requirements The recommended minimum hardware requirements for bare metal servers for various host types are: -+---------------------+-----------------------+-----------------------+-----------------------+ -| Minimum Requirement | Controller Node | Storage Node | Compute Node | -+=====================+=======================+=======================+=======================+ -| Number of servers | 2 | 2-9 | 2-100 | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Minimum processor | Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket | -| class | | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Minimum memory | 64 GB | 64 GB | 32 GB | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Primary disk | 500 GB SDD or NVM | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Additional disks | None | - 1 or more 500 GB | - For OpenStack, | -| | | (min. 10K RPM) for | recommend 1 or more | -| | | Ceph OSD | 500 GB (min. 10K | -| | | - Recommended, but | RPM) for VM | -| | | not required: 1 or | ephemeral storage | -| | | more SSDs or NVMe | | -| | | drives for Ceph | | -| | | journals (min. 1024 | | -| | | MiB per OSD | | -| | | journal) | | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Minimum network | - Mgmt/Cluster: | - Mgmt/Cluster: | - Mgmt/Cluster: | -| ports | 1x10GE | 1x10GE | 1x10GE | -| | - OAM: 1x1GE | | - Data: 1 or more | -| | | | x 10GE | -+---------------------+-----------------------+-----------------------+-----------------------+ -| BIOS settings | - Hyper-Threading technology enabled | -| | - Virtualization technology enabled | -| | - VT for directed I/O enabled | -| | - CPU power and performance policy set to performance | -| | - CPU C state control disabled | -| | - Plug & play BMC detection disabled | -+---------------------+-----------------------+-----------------------+-----------------------+ ++---------------------+---------------------------+-----------------------+-----------------------+ +| Minimum Requirement | Controller Node | Storage Node | Compute Node | ++=====================+===========================+=======================+=======================+ +| Number of servers | 2 | 2-9 | 2-100 | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Minimum processor | Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket | +| class | | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Minimum memory | 64 GB | 64 GB | 32 GB | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Primary disk | 500 GB SDD or NVMe ( see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) | +| | :doc:`../../nvme_config`) | | | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Additional disks | None | - 1 or more 500 GB | - For OpenStack, | +| | | (min. 10K RPM) for | recommend 1 or more | +| | | Ceph OSD | 500 GB (min. 10K | +| | | - Recommended, but | RPM) for VM | +| | | not required: 1 or | ephemeral storage | +| | | more SSDs or NVMe | | +| | | drives for Ceph | | +| | | journals (min. 1024 | | +| | | MiB per OSD | | +| | | journal) | | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Minimum network | - Mgmt/Cluster: | - Mgmt/Cluster: | - Mgmt/Cluster: | +| ports | 1x10GE | 1x10GE | 1x10GE | +| | - OAM: 1x1GE | | - Data: 1 or more | +| | | | x 10GE | ++---------------------+---------------------------+-----------------------+-----------------------+ +| BIOS settings | - Hyper-Threading technology enabled | +| | - Virtualization technology enabled | +| | - VT for directed I/O enabled | +| | - CPU power and performance policy set to performance | +| | - CPU C state control disabled | +| | - Plug & play BMC detection disabled | ++---------------------+---------------------------+-----------------------+-----------------------+ -------------------------- Prepare bare metal servers diff --git a/doc/source/deploy_install_guides/r2_release/bare_metal/dedicated_storage_install_kubernetes.rst b/doc/source/deploy_install_guides/r2_release/bare_metal/dedicated_storage_install_kubernetes.rst index 6e129591f..e901a545b 100644 --- a/doc/source/deploy_install_guides/r2_release/bare_metal/dedicated_storage_install_kubernetes.rst +++ b/doc/source/deploy_install_guides/r2_release/bare_metal/dedicated_storage_install_kubernetes.rst @@ -176,7 +176,7 @@ Configure storage nodes system interface-network-assign $COMPUTE mgmt0 cluster-host done -#. Add OSDs to storage-0: +#. Add OSDs to storage-0. The following example adds OSDs to the `sdb` disk: :: @@ -191,7 +191,7 @@ Configure storage nodes system host-stor-list $HOST -#. Add OSDs to storage-1: +#. Add OSDs to storage-1. The following example adds OSDs to the `sdb` disk: :: diff --git a/doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_hardware.rst b/doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_hardware.rst index 2b8b4751a..26711ca34 100644 --- a/doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_hardware.rst +++ b/doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_hardware.rst @@ -31,7 +31,7 @@ host types are: +-------------------------+-----------------------------------------------------------+ | Minimum memory | 64 GB | +-------------------------+-----------------------------------------------------------+ -| Primary disk | 500 GB SDD or NVMe | +| Primary disk | 500 GB SDD or NVMe (see :doc:`../../nvme_config`) | +-------------------------+-----------------------------------------------------------+ | Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD | | | - Recommended, but not required: 1 or more SSDs or NVMe | diff --git a/doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_install_kubernetes.rst b/doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_install_kubernetes.rst index e3712f4b7..7eaae796d 100644 --- a/doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_install_kubernetes.rst +++ b/doc/source/deploy_install_guides/r3_release/bare_metal/aio_duplex_install_kubernetes.rst @@ -220,7 +220,8 @@ Configure controller-0 system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0} system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1} -#. Add an OSD on controller-0 for ceph: +#. Add an OSD on controller-0 for ceph. The following example adds an OSD + to the `sdb` disk: :: diff --git a/doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_hardware.rst b/doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_hardware.rst index e128ebd6f..d8174405a 100644 --- a/doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_hardware.rst +++ b/doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_hardware.rst @@ -31,7 +31,7 @@ host types are: +-------------------------+-----------------------------------------------------------+ | Minimum memory | 64 GB | +-------------------------+-----------------------------------------------------------+ -| Primary disk | 500 GB SDD or NVMe | +| Primary disk | 500 GB SDD or NVMe (see :doc:`../../nvme_config`) | +-------------------------+-----------------------------------------------------------+ | Additional disks | - 1 or more 500 GB (min. 10K RPM) for Ceph OSD | | | - Recommended, but not required: 1 or more SSDs or NVMe | diff --git a/doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_install_kubernetes.rst b/doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_install_kubernetes.rst index ad8fce95a..69e99f458 100644 --- a/doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_install_kubernetes.rst +++ b/doc/source/deploy_install_guides/r3_release/bare_metal/aio_simplex_install_kubernetes.rst @@ -227,7 +227,8 @@ Configure controller-0 system interface-datanetwork-assign ${COMPUTE} ${DATA0IFUUID} ${PHYSNET0} system interface-datanetwork-assign ${COMPUTE} ${DATA1IFUUID} ${PHYSNET1} -#. Add an OSD on controller-0 for ceph: +#. Add an OSD on controller-0 for ceph. The following example adds an OSD + to the `sdb` disk: :: diff --git a/doc/source/deploy_install_guides/r3_release/bare_metal/controller_storage_hardware.rst b/doc/source/deploy_install_guides/r3_release/bare_metal/controller_storage_hardware.rst index ca1d0e399..2330b4e1d 100644 --- a/doc/source/deploy_install_guides/r3_release/bare_metal/controller_storage_hardware.rst +++ b/doc/source/deploy_install_guides/r3_release/bare_metal/controller_storage_hardware.rst @@ -27,7 +27,8 @@ host types are: +-------------------------+-----------------------------+-----------------------------+ | Minimum memory | 64 GB | 32 GB | +-------------------------+-----------------------------+-----------------------------+ -| Primary disk | 500 GB SDD or NVMe | 120 GB (Minimum 10k RPM) | +| Primary disk | 500 GB SDD or NVMe (see | 120 GB (Minimum 10k RPM) | +| | :doc:`../../nvme_config`) | | +-------------------------+-----------------------------+-----------------------------+ | Additional disks | - 1 or more 500 GB (min. | - For OpenStack, recommend | | | 10K RPM) for Ceph OSD | 1 or more 500 GB (min. | diff --git a/doc/source/deploy_install_guides/r3_release/bare_metal/controller_storage_install_kubernetes.rst b/doc/source/deploy_install_guides/r3_release/bare_metal/controller_storage_install_kubernetes.rst index c00b2efb8..bad677554 100644 --- a/doc/source/deploy_install_guides/r3_release/bare_metal/controller_storage_install_kubernetes.rst +++ b/doc/source/deploy_install_guides/r3_release/bare_metal/controller_storage_install_kubernetes.rst @@ -549,7 +549,7 @@ service. This can take 5-10 minutes, depending on the performance of the host ma Add Ceph OSDs to controllers ---------------------------- -#. Add OSDs to controller-0: +#. Add OSDs to controller-0. The following example adds OSDs to the `sdb` disk: :: @@ -564,7 +564,7 @@ Add Ceph OSDs to controllers system host-stor-list $HOST -#. Add OSDs to controller-1: +#. Add OSDs to controller-1. The following example adds OSDs to the `sdb` disk: :: diff --git a/doc/source/deploy_install_guides/r3_release/bare_metal/dedicated_storage_hardware.rst b/doc/source/deploy_install_guides/r3_release/bare_metal/dedicated_storage_hardware.rst index 8a54be78c..e1030ff4c 100644 --- a/doc/source/deploy_install_guides/r3_release/bare_metal/dedicated_storage_hardware.rst +++ b/doc/source/deploy_install_guides/r3_release/bare_metal/dedicated_storage_hardware.rst @@ -17,41 +17,42 @@ Minimum hardware requirements The recommended minimum hardware requirements for bare metal servers for various host types are: -+---------------------+-----------------------+-----------------------+-----------------------+ -| Minimum Requirement | Controller Node | Storage Node | Compute Node | -+=====================+=======================+=======================+=======================+ -| Number of servers | 2 | 2-9 | 2-100 | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Minimum processor | Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket | -| class | | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Minimum memory | 64 GB | 64 GB | 32 GB | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Primary disk | 500 GB SDD or NVM | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Additional disks | None | - 1 or more 500 GB | - For OpenStack, | -| | | (min. 10K RPM) for | recommend 1 or more | -| | | Ceph OSD | 500 GB (min. 10K | -| | | - Recommended, but | RPM) for VM | -| | | not required: 1 or | ephemeral storage | -| | | more SSDs or NVMe | | -| | | drives for Ceph | | -| | | journals (min. 1024 | | -| | | MiB per OSD | | -| | | journal) | | -+---------------------+-----------------------+-----------------------+-----------------------+ -| Minimum network | - Mgmt/Cluster: | - Mgmt/Cluster: | - Mgmt/Cluster: | -| ports | 1x10GE | 1x10GE | 1x10GE | -| | - OAM: 1x1GE | | - Data: 1 or more | -| | | | x 10GE | -+---------------------+-----------------------+-----------------------+-----------------------+ -| BIOS settings | - Hyper-Threading technology enabled | -| | - Virtualization technology enabled | -| | - VT for directed I/O enabled | -| | - CPU power and performance policy set to performance | -| | - CPU C state control disabled | -| | - Plug & play BMC detection disabled | -+---------------------+-----------------------+-----------------------+-----------------------+ ++---------------------+---------------------------+-----------------------+-----------------------+ +| Minimum Requirement | Controller Node | Storage Node | Compute Node | ++=====================+===========================+=======================+=======================+ +| Number of servers | 2 | 2-9 | 2-100 | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Minimum processor | Dual-CPU Intel® Xeon® E5 26xx family (SandyBridge) 8 cores/socket | +| class | | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Minimum memory | 64 GB | 64 GB | 32 GB | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Primary disk | 500 GB SDD or NVMe (see | 120 GB (min. 10k RPM) | 120 GB (min. 10k RPM) | +| | :doc:`../../nvme_config`) | | | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Additional disks | None | - 1 or more 500 GB | - For OpenStack, | +| | | (min. 10K RPM) for | recommend 1 or more | +| | | Ceph OSD | 500 GB (min. 10K | +| | | - Recommended, but | RPM) for VM | +| | | not required: 1 or | ephemeral storage | +| | | more SSDs or NVMe | | +| | | drives for Ceph | | +| | | journals (min. 1024 | | +| | | MiB per OSD | | +| | | journal) | | ++---------------------+---------------------------+-----------------------+-----------------------+ +| Minimum network | - Mgmt/Cluster: | - Mgmt/Cluster: | - Mgmt/Cluster: | +| ports | 1x10GE | 1x10GE | 1x10GE | +| | - OAM: 1x1GE | | - Data: 1 or more | +| | | | x 10GE | ++---------------------+---------------------------+-----------------------+-----------------------+ +| BIOS settings | - Hyper-Threading technology enabled | +| | - Virtualization technology enabled | +| | - VT for directed I/O enabled | +| | - CPU power and performance policy set to performance | +| | - CPU C state control disabled | +| | - Plug & play BMC detection disabled | ++---------------------+---------------------------+-----------------------+-----------------------+ -------------------------- Prepare bare metal servers diff --git a/doc/source/deploy_install_guides/r3_release/bare_metal/dedicated_storage_install_kubernetes.rst b/doc/source/deploy_install_guides/r3_release/bare_metal/dedicated_storage_install_kubernetes.rst index a1a25fd2c..819d2fac3 100644 --- a/doc/source/deploy_install_guides/r3_release/bare_metal/dedicated_storage_install_kubernetes.rst +++ b/doc/source/deploy_install_guides/r3_release/bare_metal/dedicated_storage_install_kubernetes.rst @@ -176,7 +176,7 @@ Configure storage nodes system interface-network-assign $COMPUTE mgmt0 cluster-host done -#. Add OSDs to storage-0: +#. Add OSDs to storage-0. The following example adds OSDs to the `sdb` disk: :: @@ -191,7 +191,7 @@ Configure storage nodes system host-stor-list $HOST -#. Add OSDs to storage-1: +#. Add OSDs to storage-1. The following example adds OSDs to the `sdb` disk: ::