.. cwn1581381515361
.. _configure-oidc-auth-applications:
=============================
Set up OIDC Auth Applications
=============================
The **oidc-auth-apps** application is a system application that enables the use
of a remote Windows Active Directory server or an |LDAP| server to authenticate
users of the Kubernetes API.
In this document, the |LDAP| server presented is the one present in the |prod|
deploy, called Local |LDAP| server. This |LDAP| server runs in the controllers
except for DC environments, where it runs only in the SystemController's
controllers.
The ``oidc-auth-apps`` is packaged in the ISO and uploaded by default.
Configure OIDC Auth Applications
================================
.. rubric:: |prereq|
.. _configure-oidc-auth-applications-ul-gpz-x51-llb:
- You must have configured the Kubernetes ``kube-apiserver`` to use
the **oidc-auth-apps** |OIDC| identity provider for validation of
tokens in Kubernetes API requests, which use |OIDC| authentication. For
more information on configuring the Kubernetes ``kube-apiserver``, see
:ref:`Configure Kubernetes for OIDC Token Validation while
Bootstrapping the System
<configure-kubernetes-for-oidc-token-validation-while-bootstrapping-the-system>`
or :ref:`Configure Kubernetes for OIDC Token Validation after
Bootstrapping the System
<configure-kubernetes-for-oidc-token-validation-after-bootstrapping-the-system>`.
.. rubric:: |proc|
#. Create certificates using one of the following options.
#. Create certificates using cert-manager (recommended):
Certificates used by ``oidc-auth-apps`` can be managed by Cert-Manager.
Doing so will automatically renew the certificates before they expire.
The ``system-local-ca`` ClusterIssuer (see
:ref:`starlingx-rest-api-applications-and-the-web-admin-server-cert-9196c5794834`)
will be used to issue this certificate.
.. note::
If a signing |CA| is not a well-known trusted |CA|, you must ensure the
system trusts the |CA| by specifying it either during the bootstrap
phase of system installation, by specifying ``ssl_ca_cert: <certificate_file>``
in the ansible bootstrap overrides localhost.yml file, or by using the
:command:`system certificate-install -m ssl_ca <certificate_file>`
command.
Also refer to :ref:`Add a Trusted CA <add-a-trusted-ca>`
for installing a root |CA|, which includes instruction to `lock/unlock`
controller nodes when using :command:`system certificate-install`
command.
.. important::
The namespace for ``oidc-auth-apps`` must be ``kube-system``.
#. Create the |OIDC| client and identity provider server certificate and
private key pair.
.. code-block:: none
~(keystone_admin)]$ cat <<EOF > oidc-auth-apps-certificate.yaml
---
apiVersion: cert-manager.io/v1
kind: Certificate
metadata:
name: oidc-auth-apps-certificate
namespace: kube-system
spec:
secretName: oidc-auth-apps-certificate
duration: 2160h # 90 days
renewBefore: 360h # 15 days
issuerRef:
name: system-local-ca
kind: ClusterIssuer
commonName: <OAM_floating_IP_address>
subject:
organizations:
- ABC-Company
organizationalUnits:
- StarlingX-system-oidc-auth-apps
ipAddresses:
- <OAM_floating_IP_address>
EOF
.. include:: /shared/_includes/recommended-renewbefore-value-for-certificates-c929cf42b03b.rest
#. Apply the configuration.
.. code-block:: none
~(keystone_admin)]$ kubectl apply -f oidc-auth-apps-certificate.yaml
#. Verify the configuration.
.. code-block:: none
~(keystone_admin)]$ kubectl get certificate oidc-auth-apps-certificate –n kube-system
#. Configure the |OIDC|-client with both the |OIDC| Client and Identity
Server Certificate and the |OIDC| Client and Identity Trusted |CA|
certificate.
.. only:: starlingx
Create a secret with the certificate of the root |CA| that signed
the |OIDC| client and identity provider's server certificate. In
this example, it will be the ``ca.crt`` of the ``system-local-ca``
(ClusterIssuer).
.. only:: partner
.. include:: /_includes/configure-oidc-auth-applications.rest
:start-after: configure-oidc-begin
:end-before: configure-oidc-end
.. only:: starlingx
.. code-block:: none
~(keystone_admin)]$ mkdir /home/sysadmin/ssl
~(keystone_admin)]$ kubectl get secret system-local-ca -n cert-manager -o=jsonpath='{.data.ca\.crt}' | base64 --decode > /home/sysadmin/ssl/dex-ca-cert.crt
~(keystone_admin)]$ kubectl create secret generic dex-ca-cert --from-file=/home/sysadmin/ssl/dex-ca-cert.crt -n kube-system
~(keystone_admin)]$ cat <<EOF > stx-oidc-client.yaml
tlsName: oidc-auth-apps-certificate
config:
# The OIDC-client container mounts the dex-ca-cert secret at /home, therefore
# issuer_root_ca: /home/<filename-only-of-generic-secret>
issuer_root_ca: /home/dex-ca-cert.crt
issuer_root_ca_secret: dex-ca-cert
EOF
~(keystone_admin)]$ system helm-override-update oidc-auth-apps oidc-client kube-system --values stx-oidc-client.yaml
.. only:: partner
.. include:: /_includes/configure-oidc-auth-applications.rest
:start-after: configure-oidc-tls1-begin
:end-before: configure-oidc-tls1-end
#. Create a secret with the certificate of the |CA| that signed the
certificate of the Identity Providers (IdPs) that you will be using.
If you will use a |WAD| server, create the secret ``wad-ca-cert`` with
the |CA|'s certificate that signed the Active Directory's certificate
using the command below.
.. code-block:: none
~(keystone_admin)]$ kubectl create secret generic wad-ca-cert --from-file=wad-ca-cert.crt -n kube-system
.. only:: starlingx
If you will use the Local |LDAP| server, create the secret
``local-ldap-ca-cert`` with the |CA|'s certificate that signed the
Local |LDAP|'s certificate using the command below. This |CA|'s
certificate, presented below as file ``local-ldap-ca-cert.crt``, can
be extracted from the controller where the Local |LDAP| server is
running (the SystemController in DC environments) using the command
`kubectl get secret system-local-ca -n cert-manager
-o=jsonpath=\'{.data.ca\\.crt}\' | base64 \-\-decode >
local-ldap-ca-cert.crt`.
.. only:: partner
.. include:: /_includes/configure-oidc-auth-applications.rest
:start-after: configure-oidc-tls2-begin
:end-before: configure-oidc-tls2-end
.. code-block:: none
~(keystone_admin)]$ kubectl create secret generic local-ldap-ca-cert --from-file=local-ldap-ca-cert.crt -n kube-system
The secrets ``wad-ca-cert`` and/or ``local-ldap-ca-cert`` will be used
later in the application overrides.
#. Configure the secret observer to track changes.
Change the cronSchedule according to your needs. The cronSchedule
controls how often the application checks to see if the certificate
mounted on the dex and oidc-client pods had changed.
Create a YAML configuration to modify the cronSchedule according to
your needs.
The cronSchedule controls how often the application checks to see
if the certificate mounted on the dex and oidc-client pods changed.
The following example sets the schedule to every 15 minutes.
.. code-block:: none
~(keystone_admin)]$ cat <<EOF > secret-observer-overrides.yaml
cronSchedule: "*/15 * * * *"
observedSecrets:
- secretName: "dex-ca-cert"
filename: "dex-ca-cert.crt"
deploymentToRestart: "stx-oidc-client"
- secretName: "oidc-auth-apps-certificate"
filename: "tls.crt"
deploymentToRestart: "stx-oidc-client"
- secretName: "oidc-auth-apps-certificate"
filename: "tls.crt"
deploymentToRestart: "oidc-dex"
EOF
Execute the following command to update the overrides:
.. code-block:: none
~(keystone_admin)]$ system helm-override-update oidc-auth-apps secret-observer kube-system --values secret-observer-overrides.yaml
#. Use certificates generated and signed by an external |CA|.
Although it is recommended to use cert-manager to manage certificates, as
described above in item "Create certificates using cert-manager
(recommended)", one can instead use certificates generated by an external
|CA|.
For backwards compatibility reasons, the default helm chart overrides of
dex, oidc-client and secret-observer in ``oidc-auth-apps`` application
are set for this example of using externally generated certificates. The
default override values of helm charts in ``oidc-auth-apps`` application
include the use of kubernetes secrets named ``local-dex.tls``, and
``dex-client-secret`` for declaring the dex server certificate and the
|CA| which signed it, respectively. These secrets are created in this
example.
In addition, one can indicate the certificates for a |WAD| server and/or a
Local |LDAP| server that have https enabled by using the secrets
``wad-ca-cert`` and/or ``local-ldap-ca-cert`` as in this example.
.. rubric:: |prereq|
- You must have a |CA| signed certificate (``dex-cert.pem`` file), and
private key (``dex-key.pem file``) for the dex |OIDC| Identity
Provider of **oidc-auth-apps**.
This certificate *must* have the |prod|'s floating |OAM| IP Address
in the |SAN| list. If you are planning on defining and using a DNS
name for the |prod|'s floating |OAM| IP Address, then this DNS name
*must* also be in the |SAN| list. Refer to the documentation for the
external |CA| that you are using, in order to create a signed
certificate and key.
If you are using an intermediate |CA| to sign the dex certificate,
include both the dex certificate (signed by the intermediate |CA|),
and the intermediate |CA|'s certificate (signed by the Root |CA|) in
that order, in ``dex-cert.pem``.
- You must have the certificate of the |CA| (``dex-ca.pem`` file) that
signed the above certificate for the dex |OIDC| Identity Provider of
**oidc-auth-apps**.
If an intermediate |CA| was used to sign the dex certificate and both
the dex certificate and the intermediate |CA| certificate was
included in ``dex-cert.pem``, then the ``dex-ca.pem`` file should
contain the root |CA|'s certificate.
If the signing |CA| (``dex-ca.pem``) is not a well-known trusted
|CA|, you must ensure the system trusts the |CA| by specifying it
either during the bootstrap phase of system installation, by
specifying ``ssl_ca_cert: dex-ca.pem`` in the ansible bootstrap
overrides ``localhost.yml`` file, or by using the :command:`system
certificate-install -m ssl_ca dex-ca.pem` command.
Also refer to :ref:`Add a Trusted CA <add-a-trusted-ca>`
for installing a root |CA|, which includes instruction to `lock/unlock`
controller nodes when using :command:`system certificate-install`
command.
- Create the secret, ``local-dex.tls``, with the certificate and key,
to be used by the **oidc-auth-apps**, as well as the secret,
``dex-client-secret``, with the |CA|'s certificate that signed the
``local-dex.tls`` certificate.
For example, assuming the cert and key pem files for creating these
secrets are in ``/home/sysadmin/ssl/``, run the following commands to
create the secrets:
.. note::
**oidc-auth-apps** looks specifically for secrets of these names
in the ``kube-system`` namespace.
For the generic secret ``dex-client-secret``, the filename must
be ``dex-ca.pem``.
.. code-block:: none
~(keystone_admin)]$ kubectl create secret tls local-dex.tls --cert=ssl/dex-cert.pem --key=ssl/dex-key.pem -n kube-system
~(keystone_admin)]$ kubectl create secret generic dex-client-secret --from-file=/home/sysadmin/ssl/dex-ca.pem -n kube-system
If you will use a |WAD| server, create the secret ``wad-ca-cert`` with
the |CA|'s certificate that signed the Active Directory's certificate
using the command below.
.. code-block:: none
~(keystone_admin)]$ kubectl create secret generic wad-ca-cert --from-file=wad-ca-cert.crt -n kube-system
.. only:: starlingx
If you will use the Local |LDAP| server, create the secret
``local-ldap-ca-cert`` with the |CA|'s certificate that signed the
Local |LDAP|'s certificate using the command below. This |CA|'s
certificate, presented below as file ``local-ldap-ca-cert.crt``, can
be extracted from the controller where the Local |LDAP| server is
running (the SystemController in DC environments) using the command
`kubectl get secret system-local-ca -n cert-manager
-o=jsonpath=\'{.data.ca\\.crt}\' | base64 \-\-decode >
local-ldap-ca-cert.crt`.
.. only:: partner
.. include:: /_includes/configure-oidc-auth-applications.rest
:start-after: configure-oidc-tls3-begin
:end-before: configure-oidc-tls3-end
.. code-block:: none
~(keystone_admin)]$ kubectl create secret generic local-ldap-ca-cert --from-file=local-ldap-ca-cert.crt -n kube-system
#. Specify user overrides for **oidc-auth-apps** application, by using the
following command:
.. code-block:: none
~(keystone_admin)]$ system helm-override-update oidc-auth-apps dex kube-system --values /home/sysadmin/dex-overrides.yaml
The dex-overrides.yaml file contains the desired dex helm chart overrides
(that is, the |LDAP| connector configuration for the Active Directory
service, optional token expiry, and so on), and volume mounts for
providing access to the ``wad-ca-cert`` secret and/or to the
``local-ldap-ca-cert``, described in this section.
For the complete list of dex helm chart values supported, see `Dex Helm
Chart Values
<https://github.com/dexidp/helm-charts/blob/dex-0.15.3/charts/dex/values.yaml>`__.
For the complete list of parameters of the dex |LDAP| connector
configuration, see `Authentication Through LDAP
<https://dexidp.io/docs/connectors/ldap/>`__.
The overall Dex documentation is available on `dexidp.io
<https://dexidp.io/docs/>`__. The configuration of dex server version
v2.37.0 is described on github
(https://github.com/dexidp/dex/blob/v2.37.0/config.yaml.dist) with example
``config.dev.yaml``
(https://github.com/dexidp/dex/blob/v2.37.0/config.dev.yaml).
The examples below configure a token expiry of ten hours, the |LDAP|
connectors to the remote servers using HTTPS (LDAPS) using the servers |CA|
secrets, the required remote servers login information (that is, bindDN,
and bindPW), and example :command:`userSearch`, and :command:`groupSearch`
clauses.
(Optional) There is a default secret in the dex configuration for
``staticClients``. You can change this using helm overrides. For example,
to change the secret, first run the following command to see the default
settings. In this example, ``10.10.10.2`` is the |prod-long| |OAM| floating
IP address.
.. code-block:: none
~(keystone_admin)]$ system helm-override-show oidc-auth-apps dex kube-system
config:
staticClients:
- id: stx-oidc-client-app
name: STX OIDC Client app
redirectURIs: ['https://10.10.10.2:30555/callback']
secret: St8rlingX
Change the secret from the output and copy the entire configuration section
shown above in to your dex overrides file shown in the example below.
.. warning::
Do not forget to include the id, name, and redirectURIs parameters.
.. note::
There is an internal password (called ``secret`` in dex overrides and
``client_secret`` in oidc-client overrides) that is used between the
oidc-client container and the dex container. It is recommended that you
configure a unique, more secure password by specifying the value in the
dex overrides file, as shown in the example below.
For only a |WAD| server, the configuration is shown below.
.. begin-wad-connector-config
.. code-block:: none
config:
staticClients:
- id: stx-oidc-client-app
name: STX OIDC Client app
redirectURIs: ['https://<OAM floating IP address>:30555/callback']
secret: BetterSecret
expiry:
idTokens: "10h"
connectors:
- type: ldap
name: WAD
id: wad-1
config:
host: pv-windows-acti.windows-activedir.example.com:636
rootCA: /etc/ssl/certs/adcert/wad-ca-cert.crt
insecureNoSSL: false
insecureSkipVerify: false
bindDN: cn=Administrator,cn=Users,dc=windows-activedir,dc=example,dc=com
bindPW: [<password>]
usernamePrompt: Username
userSearch:
baseDN: ou=Users,ou=Titanium,dc=windows-activedir,dc=example,dc=com
filter: "(objectClass=user)"
username: sAMAccountName
idAttr: sAMAccountName
emailAttr: sAMAccountName
nameAttr: displayName
groupSearch:
baseDN: ou=Groups,ou=Titanium,dc=windows-activedir,dc=example,dc=com
filter: "(objectClass=group)"
userMatchers:
- userAttr: DN
groupAttr: member
nameAttr: cn
volumeMounts:
- mountPath: /etc/ssl/certs/adcert
name: certdir
- mountPath: /etc/dex/tls
name: https-tls
volumes:
- name: certdir
secret:
secretName: wad-ca-cert
- name: https-tls
secret:
defaultMode: 420
secretName: oidc-auth-apps-certificate
.. end-wad-connector-config
For only the Local |LDAP| server, the configuration is shown below. The
value of ``bindPW`` can be retrieved through command `keyring get ldap
ldapadmin` executed in the controller where the Local |LDAP| server is
running. In DC environments, the MGMT floating IP address to be used is the
one from the SystemController.
.. begin-local-ldap-connector-config
.. code-block:: none
config:
staticClients:
- id: stx-oidc-client-app
name: STX OIDC Client app
redirectURIs: ['https://<OAM floating IP address>:30555/callback']
secret: BetterSecret
expiry:
idTokens: "10h"
connectors:
- type: ldap
name: LocalLDAP
id: localldap-1
config:
host: <MGMT floating IP address>:636
rootCA: /etc/ssl/certs/adcert/local-ldap-ca-cert.crt
insecureNoSSL: false
insecureSkipVerify: false
bindDN: CN=ldapadmin,DC=cgcs,DC=local
bindPW: [<password>]
usernamePrompt: Username
userSearch:
baseDN: ou=People,dc=cgcs,dc=local
filter: "(objectClass=posixAccount)"
username: uid
idAttr: DN
emailAttr: uid
nameAttr: gecos
groupSearch:
baseDN: ou=Group,dc=cgcs,dc=local
filter: "(objectClass=posixGroup)"
userMatchers:
- userAttr: uid
groupAttr: memberUid
nameAttr: cn
volumeMounts:
- mountPath: /etc/ssl/certs/adcert
name: certdir
- mountPath: /etc/dex/tls
name: https-tls
volumes:
- name: certdir
secret:
secretName: local-ldap-ca-cert
- name: https-tls
secret:
defaultMode: 420
secretName: oidc-auth-apps-certificate
.. end-local-ldap-connector-config
If both |WAD| and Local |LDAP| servers are used at same time, use the
examples above with the connectors from |WAD| and Local |LDAP| in the same
``connectors`` list while the ``volumes`` to be used is the one written
below.
.. begin-both-wad-and-local-ldap-volume-config
.. code-block:: none
volumes:
- name: certdir
projected:
sources:
- secret:
name: wad-ca-cert
- secret:
name: local-ldap-ca-cert
- name: https-tls
secret:
defaultMode: 420
secretName: oidc-auth-apps-certificate
.. end-both-wad-and-local-ldap-volume-config
If more than one Windows Active Directory service is required for
authenticating the different users of the |prod|, multiple ``ldap``
type connectors can be configured; one for each Windows Active
Directory service.
If more than one ``userSearch`` plus ``groupSearch`` clauses are
required for the same Windows Active Directory service, multiple
``ldap`` type connectors, with the same host information but
different ``userSearch`` plus ``groupSearch`` clauses, should be used.
Whenever you use multiple ``ldap`` type connectors, ensure you use
unique ``name:`` and ``id:`` parameters for each connector.
#. An override in the secrets in the dex helm chart must be accompanied by
an override in the oidc-client helm chart.
The following override is sufficient for changing the secret in the
``/home/sysadmin/oidc-client-overrides.yaml`` file.
.. code-block:: none
config:
client_secret: BetterSecret
Apply the oidc-client overrides using the following command:
.. code-block:: none
~(keystone_admin)]$ system helm-override-update oidc-auth-apps oidc-client kube-system --values /home/sysadmin/oidc-client-overrides.yaml --reuse-values
.. note::
If you need to manually override the secrets, the ``client_secret`` in
the oidc-client overrides must match the ``staticClients`` ``secret`` in
the dex overrides, otherwise the oidc-auth |CLI| client will not
function.
#. Use the :command:`system application-apply` command to apply the
configuration:
.. code-block:: none
~(keystone_admin)]$ system application-apply oidc-auth-apps
Default helm overrides for oidc-auth-apps application
=====================================================
For backwards compatibility reasons, the default helm overrides for dex helm
are:
.. note::
It is NOT recommended to use these; it is recommended to create
certificates using ``cert-manager`` and explicitly refer to the resulting
certificate secrets in user-specified helm overrides, as described on the
procedure above.
.. code-block:: none
image:
repository: ghcr.io/dexidp/dex
pullPolicy: IfNotPresent
tag: v2.37.0
imagePullSecrets:
- name: default-registry-key
env:
name: KUBERNETES_POD_NAMESPACE
value: kube-system
config:
issuer: https://<OAM_IP>:30556/dex
staticClients:
- id: stx-oidc-client-app
name: STX OIDC Client app
secret: St8rlingX
redirectURIs:
- https://<OAM_IP>:30555/callback
enablePasswordDB: false
web:
tlsCert: /etc/dex/tls/tls.crt
tlsKey: /etc/dex/tls/tls.key
storage:
type: kubernetes
config:
inCluster: true
oauth2:
skipApprovalScreen: true
logger:
level: debug
service:
type: NodePort
ports:
https:
nodePort: 30556
https:
enabled: true
grpc:
enabled: false
nodeSelector:
node-role.kubernetes.io/control-plane: ""
volumeMounts:
- mountPath: /etc/dex/tls/
name: https-tls
volumes:
- name: https-tls
secret:
defaultMode: 420
secretName: local-dex.tls
tolerations:
- key: "node-role.kubernetes.io/master"
operator: "Exists"
effect: "NoSchedule"
- key: "node-role.kubernetes.io/control-plane"
operator: "Exists"
effect: "NoSchedule"
podLabels:
app: dex
affinity:
podAntiAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
- labelSelector:
matchExpressions:
- key: app
operator: In
values:
- dex
topologyKey: kubernetes.io/hostname
The default helm overrides for oidc-client are:
.. code-block:: none
config:
client_id: stx-oidc-client-app
client_secret: St8rlingX
issuer: https://<OAM_IP>:30556/dex
issuer_root_ca: /home/dex-ca.pem
issuer_root_ca_secret: dex-client-secret
listen: https://0.0.0.0:5555
redirect_uri: https://<OAM_IP>:30555/callback
tlsCert: /etc/dex/tls/https/server/tls.crt
tlsKey: /etc/dex/tls/https/server/tls.key
nodeSelector:
node-role.kubernetes.io/control-plane: ""
service:
type: NodePort
port: 5555
nodePort: 30555
replicas: <replicate count>
tolerations:
- key: "node-role.kubernetes.io/master"
operator: "Exists"
effect: "NoSchedule"
- key: "node-role.kubernetes.io/control-plane"
operator: "Exists"
effect: "NoSchedule"
affinity:
podAntiAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
- labelSelector:
matchExpressions:
- key: app
operator: In
values:
- stx-oidc-client
topologyKey: kubernetes.io/hostname
helmv3Compatible: true
The default helm overrides for secret-observer are:
.. code-block:: none
namespace: "kube-system"
observedSecrets:
- secretName: "dex-client-secret"
filename: "dex-ca.pem"
deploymentToRestart: "stx-oidc-client"
- secretName: "local-dex.tls"
filename: "tls.crt"
deploymentToRestart: "stx-oidc-client"
- secretName: "local-dex.tls"
filename: "tls.crt"
deploymentToRestart: "oidc-dex"
tolerations:
- key: "node-role.kubernetes.io/master"
operator: "Exists"
effect: "NoSchedule"
- key: "node-role.kubernetes.io/control-plane"
operator: "Exists"
effect: "NoSchedule"