Correct conditionalization on 2 blocks per install procedure Add note about initial controller unlock and IPMG (except simplex) Signed-off-by: Ron Stone <ronald.stone@windriver.com> Change-Id: I65d9f149abf754654822457ea564062b1c203910
		
			
				
	
	
		
			16 lines
		
	
	
		
			914 B
		
	
	
	
		
			ReStructuredText
		
	
	
	
	
	
			
		
		
	
	
			16 lines
		
	
	
		
			914 B
		
	
	
	
		
			ReStructuredText
		
	
	
	
	
	
.. note::
 | 
						|
    Controller-0 and controller-1 use IP multicast messaging for
 | 
						|
    synchronization. If loss of synchronization occurs a few minutes after
 | 
						|
    controller-1 becomes available, ensure that the switches and other devices
 | 
						|
    on the management and infrastructure networks are configured with
 | 
						|
    appropriate settings.
 | 
						|
 | 
						|
    In particular, if |IGMP| snooping is enabled on |ToR| switches, then a
 | 
						|
    device acting as an |IGMP| querier is required on the network \(on the same
 | 
						|
    |VLAN|\) to prevent nodes from being dropped from the multicast group. The
 | 
						|
    |IGMP| querier periodically sends |IGMP| queries to all nodes on the
 | 
						|
    network, and each node sends an |IGMP| join or report in response. Without
 | 
						|
    an |IGMP| querier, the nodes do not periodically send |IGMP| join messages
 | 
						|
    after the initial join sent when the link first goes up, and they are
 | 
						|
    eventually dropped from the multicast group.
 |