ed7de99b58
Refactoor linking for DS use. Change-Id: I6de5813fb7df5741e13d34163545d2402a4fd6c5 Signed-off-by: Ron Stone <ronald.stone@windriver.com>
162 lines
5.6 KiB
ReStructuredText
162 lines
5.6 KiB
ReStructuredText
|
|
.. _installation-prereqs:
|
|
|
|
|
|
==========================
|
|
Installation Prerequisites
|
|
==========================
|
|
|
|
.. begin-install-prereqs
|
|
|
|
Several pre-requisites must be completed prior to starting the |prod|
|
|
installation.
|
|
|
|
Before attempting to install |prod|, ensure that you have the following:
|
|
|
|
|
|
- The |prod-long| host installer ISO image file.
|
|
|
|
- The ``update-iso.sh`` script.
|
|
|
|
.. include:: /_includes/installation-prereqs.rest
|
|
:start-after: begin-vdr-additional-prereqs
|
|
:end-before: end-vdr-additional-prereqs
|
|
|
|
- *Optionally*, if required, update the ISO image to modify installation boot
|
|
parameters, automatically select boot menu options and/or add a kickstart
|
|
file to automatically perform configurations such as configuring the initial
|
|
IP Interface for bootstrapping.
|
|
|
|
Use the ``update-iso.sh`` script from |dnload-loc|. The script syntax and
|
|
options are:
|
|
|
|
.. code-block::
|
|
|
|
update-iso.sh --initial-password <password> -i <input bootimage.iso> -o <output bootimage.iso>
|
|
[ -a <ks-addon.cfg> ] [ -p param=value ]
|
|
[ -d <default menu option> ] [ -t <menu timeout> ]
|
|
-i <file>: Specify input ISO file
|
|
-o <file>: Specify output ISO file
|
|
-a <file>: Specify ks-addon.cfg file
|
|
--initial-password <password>: Specify the initial login password for sysadmin user
|
|
-p <p=v>: Specify boot parameter
|
|
|
|
Example:
|
|
-p instdev=/dev/disk/by-path/pci-0000:00:0d.0-ata-1.0
|
|
|
|
-d <default menu option>:
|
|
Specify default boot menu option:
|
|
0 - Standard Controller, Serial Console
|
|
1 - Standard Controller, Graphical Console
|
|
2 - AIO, Serial Console
|
|
3 - AIO, Graphical Console
|
|
4 - AIO Low-latency, Serial Console
|
|
5 - AIO Low-latency, Graphical Console
|
|
NULL - Clear default selection
|
|
-t <menu timeout>:
|
|
Specify boot menu timeout, in seconds
|
|
|
|
The following example ``ks-addon.cfg`` file, used with the ``-a`` option,
|
|
sets up an initial IP interface at boot time by defining a |VLAN| on an
|
|
Ethernet interface with with ``static`` assigned |VLAN| addresses:
|
|
|
|
.. code-block::
|
|
|
|
#### start ks-addon.cfg
|
|
RAW_DEV=enp24s0f0
|
|
OAM_VLAN=103
|
|
MGMT_VLAN=163
|
|
|
|
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/auto
|
|
auto ${RAW_DEV} lo vlan${OAM_VLAN} vlan${MGMT_VLAN}
|
|
|
|
EOF
|
|
|
|
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${RAW_DEV}
|
|
iface ${RAW_DEV} inet manual
|
|
mtu 9000
|
|
post-up echo 0 > /proc/sys/net/ipv6/conf/${RAW_DEV}/autoconf;\
|
|
echo 0 > /proc/sys/net/ipv6/conf/${RAW_DEV}/accept_ra;\
|
|
echo 0 > /proc/sys/net/ipv6/conf/${RAW_DEV}/accept_redirects
|
|
EOF
|
|
|
|
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${OAM_VLAN}
|
|
iface vlan${OAM_VLAN} inet6 static
|
|
vlan-raw-device ${RAW_DEV}
|
|
address <__address__>
|
|
netmask 64
|
|
gateway <__address__>
|
|
mtu 1500
|
|
post-up /usr/sbin/ip link set dev vlan${OAM_VLAN} mtu 1500;\
|
|
echo 0 > /proc/sys/net/ipv6/conf/vlan${OAM_VLAN}/autoconf;\
|
|
echo 0 > /proc/sys/net/ipv6/conf/vlan${OAM_VLAN}/accept_ra;\
|
|
echo 0 > /proc/sys/net/ipv6/conf/vlan${OAM_VLAN}/accept_redirects
|
|
pre-up /sbin/modprobe -q 8021q
|
|
EOF
|
|
|
|
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${MGMT_VLAN}
|
|
iface vlan${MGMT_VLAN} inet6 static
|
|
vlan-raw-device ${RAW_DEV}
|
|
address <__address__>
|
|
netmask 64
|
|
mtu 1500
|
|
post-up /usr/local/bin/tc_setup.sh vlan${MGMT_VLAN} mgmt 10000 > /dev/null;\
|
|
/usr/sbin/ip link set dev vlan${MGMT_VLAN} mtu 1500;\
|
|
echo 0 > /proc/sys/net/ipv6/conf/vlan${MGMT_VLAN}/autoconf;\
|
|
echo 0 > /proc/sys/net/ipv6/conf/vlan${MGMT_VLAN}/accept_ra;\
|
|
echo 0 > /proc/sys/net/ipv6/conf/vlan${MGMT_VLAN}/accept_redirects
|
|
pre-up /sbin/modprobe -q 8021q
|
|
EOF
|
|
|
|
#### end ks-addon.cfg
|
|
|
|
After updating the ISO image, create a bootable USB with the ISO or put the
|
|
ISO on a PXEBOOT server. See the next bullet for details.
|
|
|
|
- A mechanism for boot installation of the |prod-long| host installer ISO
|
|
downloaded from |dnload-loc|. This can be either:
|
|
|
|
- a bootable USB drive with the |prod-long| host installer ISO. See
|
|
|bootable_usb|.
|
|
|
|
- the ISO image on a |PXE| boot server on the same network as the server
|
|
that will be used as the initial controller-0. See
|
|
|pxe-boot-controller-0-d5da025c2524|.
|
|
|
|
|
|
- For all controller or AIO controller servers, |OAM| Network connectivity to:
|
|
|
|
- the |BMC| ports of all nodes
|
|
|
|
- An external DNS Server. This is required for accessing |org| Docker
|
|
Registry as discussed below.
|
|
|
|
- A Docker Registry(s) containing the Docker images for the |prod| load
|
|
accessible via the |OAM| Network.
|
|
|
|
You can use one of the following options:
|
|
|
|
.. only:: partner
|
|
|
|
- The |org| Docker Registry. This is the default option.
|
|
|
|
.. only:: starlingx
|
|
|
|
- The public open source registries (i.e. docker.io, k8s.gcr.io,
|
|
ghcr.io, gcr.io, quay.io). This is the default option.
|
|
|
|
- A private Docker Registry populated with the docker images from the
|
|
|reg-string|.
|
|
|
|
.. only:: partner
|
|
|
|
.. include:: /_includes/bootstrapping-from-a-private-docker-registry.rest
|
|
|
|
|
|
- A record of the IP addresses allocated for the public interfaces for your
|
|
deployment (that is IP addresses for the |OAM| Network and |SRIOV| Data
|
|
Networks).
|
|
|
|
|
|
.. end-install-prereqs
|