docs/doc/source/shared/_includes/incl-bootstrap-sys-controller-0-standard.rest

.. incl-bootstrap-sys-controller-0-standard-start

#. Login using the username / password of "sysadmin" / "sysadmin".

   When logging in for the first time, you will be forced to change the
   password.

   ::

      Login: sysadmin
      Password:
      Changing password for sysadmin.
      (current) UNIX Password: sysadmin
      New Password:
      (repeat) New Password:

#. Verify and/or configure IP connectivity.

   External connectivity is required to run the Ansible bootstrap
   playbook. The StarlingX boot image will |DHCP| out all interfaces so
   the server may have obtained an IP address and have external IP
   connectivity if a |DHCP| server is present in your environment. Verify
   this using the :command:`ip addr` and :command:`ping 8.8.8.8`
   commands.

   Otherwise, manually configure an IP address and default IP route. Use
   the PORT, IP-ADDRESS/SUBNET-LENGTH and GATEWAY-IP-ADDRESS applicable
   to your deployment environment.

   .. code-block:: bash

      sudo ip address add <IP-ADDRESS>/<SUBNET-LENGTH> dev <PORT>
      sudo ip link set up dev <PORT>
      sudo ip route add default via <GATEWAY-IP-ADDRESS> dev <PORT>
      ping 8.8.8.8

#. Specify user configuration overrides for the Ansible bootstrap
   playbook.

   Ansible is used to bootstrap StarlingX on controller-0. Key files for
   Ansible configuration are:

   ``/etc/ansible/hosts``
      The default Ansible inventory file. Contains a single host:
      localhost.

   ``/usr/share/ansible/stx-ansible/playbooks/bootstrap.yml``
         The Ansible bootstrap playbook.

   ``/usr/share/ansible/stx-ansible/playbooks/host_vars/bootstrap/default.yml``
      The default configuration values for the bootstrap playbook.

   ``sysadmin home directory ($HOME)``
      The default location where Ansible looks for and imports user
      configuration override files for hosts. For example:
      ``$HOME/<hostname>.yml``.

   .. only:: starlingx

      .. include:: /shared/_includes/ansible_install_time_only.txt

   Specify the user configuration override file for the Ansible bootstrap
   playbook using one of the following methods:

   .. note::

      This Ansible Overrides file for the Bootstrap Playbook
      ($HOME/localhost.yml) contains security sensitive information, use
      the :command:`ansible-vault create $HOME/localhost.yml` command to
      create it. You will be prompted for a password to protect/encrypt
      the file. Use the :command:`ansible-vault edit $HOME/localhost.yml`
      command if the file needs to be edited after it is created.

   #. Use a copy of the default.yml file listed above to provide your
      overrides.

      The ``default.yml`` file lists all available parameters for
      bootstrap configuration with a brief description for each parameter
      in the file comments.

      To use this method, run the :command:`ansible-vault create
      $HOME/localhost.yml` command and copy the contents of the
      ``default.yml`` file into the ansible-vault editor, and edit the
      configurable values as required.

   #. Create a minimal user configuration override file.

      To use this method, create your override file with the
      :command:`ansible-vault create $HOME/localhost.yml` command and
      provide the minimum required parameters for the deployment
      configuration as shown in the example below. Use the OAM IP SUBNET
      and IP ADDRESSing applicable to your deployment environment.

      .. include:: /shared/_includes/quotation-marks-in-keystone-password.rest

      .. include:: /_includes/min-bootstrap-overrides-non-simplex.rest

      .. only:: starlingx

         In either of the above options, the bootstrap playbook’s default
         values will pull all container images required for the |prod-p|
         from Docker hub.

         If you have setup a private Docker registry to use for
         bootstrapping then you will need to add the following lines in
         $HOME/localhost.yml:

      .. only:: partner

         .. include:: /_includes/install-kubernetes-bootstrap-playbook.rest
            :start-after: docker-reg-begin
            :end-before: docker-reg-end

      .. code-block:: yaml

         docker_registries:
           quay.io:
              url: myprivateregistry.abc.com:9001/quay.io
           docker.elastic.co:
              url: myprivateregistry.abc.com:9001/docker.elastic.co
           gcr.io:
              url: myprivateregistry.abc.com:9001/gcr.io
           ghcr.io:
              url: myprivateregistry.abc.com:9001/gcr.io
           k8s.gcr.io:
              url: myprivateregistry.abc.com:9001/k8s.ghcr.io
           docker.io:
              url: myprivateregistry.abc.com:9001/docker.io
           registry.k8s.io:
              url: myprivateregistry.abc.com:9001/registry.k8s.io
           icr.io:
              url: myprivateregistry.abc.com:9001/icr.io
           defaults:
              type: docker
              username: <your_myprivateregistry.abc.com_username>
              password: <your_myprivateregistry.abc.com_password>

         # Add the CA Certificate that signed myprivateregistry.abc.com’s
         # certificate as a Trusted CA
         ssl_ca_cert: /home/sysadmin/myprivateregistry.abc.com-ca-cert.pem

      See :ref:`Use a Private Docker Registry <use-private-docker-registry-r7>`
      for more information.

      .. only:: starlingx

         If a firewall is blocking access to Docker hub or your private
         registry from your StarlingX deployment, you will need to add
         the following lines in $HOME/localhost.yml  (see :ref:`Docker
         Proxy Configuration <docker_proxy_config>` for more details
         about Docker proxy settings):

      .. only:: partner

         .. include:: /_includes/install-kubernetes-bootstrap-playbook.rest
            :start-after: firewall-begin
            :end-before: firewall-end

      .. code-block:: bash

         # Add these lines to configure Docker to use a proxy server
         docker_http_proxy: http://my.proxy.com:1080
         docker_https_proxy: https://my.proxy.com:1443
         docker_no_proxy:
            - 1.2.3.4

      Refer to :ref:`Ansible Bootstrap Configurations
      <ansible_bootstrap_configs_r7>` for information on additional
      Ansible bootstrap configurations for advanced Ansible bootstrap
      scenarios.

.. incl-bootstrap-sys-controller-0-standard-end