integ/filesystem/parted/files/Makefile
Scott Little 02c9baa147 Relocate parted to stx-integ/filesystem/parted
Move content from stx-gplv3 into stx-integ

Packages will be relocated to

stx-integ:
    base/
        anaconda
        crontabs
        dnsmasq
        rsync

    database/
        python-psycopg2

    filesystem/
        parted

    grub/
        grub2

    security/
        python-keyring

Change-Id: I567380cf4f84d31c2bd07f0b89b77a452f7cbc90
Story: 2002801
Task: 22687
Signed-off-by: Scott Little <scott.little@windriver.com>
2018-08-01 15:39:30 -04:00

286 lines
8.3 KiB
Makefile
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

am__tty_colors_dummy = \
mgn= red= grn= lgn= blu= brg= std=; \
am__color_tests=no
am__tty_colors = \
$(am__tty_colors_dummy); \
test "X$(AM_COLOR_TESTS)" != Xno \
&& test "X$$TERM" != Xdumb \
&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
&& { \
am__color_tests=yes; \
red=''; \
grn=''; \
lgn=''; \
blu=''; \
mgn=''; \
brg=''; \
std=''; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
am__rst_section = { sed 'p;s/./=/g;' && echo; }
am__sh_e_setup = case $$- in *e*) set +e;; esac
am__common_driver_flags = \
--color-tests "$$am__color_tests" \
--enable-hard-errors "$$am__enable_hard_errors" \
--expect-failure "$$am__expect_failure"
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
$(am__tty_colors); \
srcdir=$(srcdir); export srcdir; \
am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`; \
test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
tst=$$dir$$f; log='$@'; \
if test -n '$(DISABLE_HARD_ERRORS)'; then \
am__enable_hard_errors=no; \
else \
am__enable_hard_errors=yes; \
fi; \
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
am__set_TESTS_bases = \
bases='$(TEST_LOGS)'; \
bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:.log=.log)
TEST_LOGS = $(am__test_logs2:.sh.log=.log)
SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver
SH_LOG_COMPILE = $(SH_LOG_COMPILER)
am__set_b = \
case '$@' in \
*/*) \
case '$*' in \
*/*) b='$*';; \
*) b=`echo '$@' | sed 's/\.log$$//'`; \
esac;; \
*) \
b='$*';; \
esac
MKDIR_P = /bin/mkdir -p
SHELL = /bin/bash
VERSION = 3.1
PACKAGE_STRING = GNU parted 3.1
PACKAGE_BUGREPORT = bug-parted@gnu.org
abs_srcdir = $(PWD)
abs_top_builddir = $(PWD)/..
abs_top_srcdir = $(PWD)/..
srcdir = .
top_srcdir = ..
subdir = tests
SH_LOG_COMPILER = $(SHELL)
TESTS = \
help-version.sh \
t0000-basic.sh \
t0001-tiny.sh \
t0010-script-no-ctrl-chars.sh \
t0100-print.sh \
t0101-print-empty.sh \
t0200-gpt.sh \
t0201-gpt.sh \
t0202-gpt-pmbr.sh \
t0203-gpt-tiny-device-abort.sh \
t0203-gpt-shortened-device-primary-valid.sh \
t0205-gpt-list-clobbers-pmbr.sh \
t0206-gpt-print-with-corrupt-primary-clobbers-pmbr.sh \
t0207-IEC-binary-notation.sh \
t0208-mkpart-end-in-IEC.sh \
t0209-gpt-pmbr_boot.sh \
t0210-gpt-resized-partition-entry-array.sh \
t0211-gpt-rewrite-header.sh \
t0212-gpt-many-partitions.sh \
t0220-gpt-msftres.sh \
t0250-gpt.sh \
t0280-gpt-corrupt.sh \
t0300-dos-on-gpt.sh \
t0400-loop-clobber-infloop.sh \
t0500-dup-clobber.sh \
t0501-duplicate.sh \
t1100-busy-label.sh \
t1101-busy-partition.sh \
t1700-probe-fs.sh \
t2200-dos-label-recog.sh \
t2201-pc98-label-recog.sh \
t2300-dos-label-extended-bootcode.sh \
t2310-dos-extended-2-sector-min-offset.sh \
t2400-dos-hfs-partition-type.sh \
t2500-probe-corrupt-hfs.sh \
t3000-resize-fs.sh \
t3200-type-change.sh \
t3300-palo-prep.sh \
t3310-flags.sh \
t3400-whole-disk-FAT-partition.sh \
t4000-sun-raid-type.sh \
t4001-sun-vtoc.sh \
t4100-msdos-partition-limits.sh \
t4100-dvh-partition-limits.sh \
t4100-msdos-starting-sector.sh \
t4200-partprobe.sh \
t4300-nilfs2-tiny.sh \
t5000-tags.sh \
t6000-dm.sh \
t6001-psep.sh \
t6100-mdraid-partitions.sh \
t7000-scripting.sh \
t8000-loop.sh \
t8001-loop-blkpg.sh \
t9010-big-sector.sh \
t9020-alignment.sh \
t9021-maxima.sh \
t9022-one-unit-snap.sh \
t9023-value-lt-one.sh \
t9030-align-check.sh \
t9040-many-partitions.sh \
t9041-undetected-in-use-16th-partition.sh \
t9042-dos-partition-limit.sh \
t9050-partition-table-types.sh
TESTS_ENVIRONMENT = \
export \
abs_top_builddir='$(abs_top_builddir)' \
abs_top_srcdir='$(abs_top_srcdir)' \
abs_srcdir='$(abs_srcdir)' \
built_programs=parted \
srcdir='$(srcdir)' \
top_srcdir='$(top_srcdir)' \
VERSION=$(VERSION) \
; 9>&2
.SUFFIXES: .log
$(TEST_SUITE_LOG): $(TEST_LOGS)
@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
ws='[ ]'; \
results=`for b in $$bases; do echo $$b.trs; done`; \
test -n "$$results" || results=/dev/null; \
all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
if test `expr $$fail + $$xpass + $$error` -eq 0; then \
success=true; \
else \
success=false; \
fi; \
br='==================='; br=$$br$$br$$br$$br; \
result_count () \
{ \
if test x"$$1" = x"--maybe-color"; then \
maybe_colorize=yes; \
elif test x"$$1" = x"--no-color"; then \
maybe_colorize=no; \
else \
echo "$@: invalid 'result_count' usage" >&2; exit 4; \
fi; \
shift; \
desc=$$1 count=$$2; \
if test $$maybe_colorize = yes && test $$count -gt 0; then \
color_start=$$3 color_end=$$std; \
else \
color_start= color_end=; \
fi; \
echo "$${color_start}# $$desc $$count$${color_end}"; \
}; \
create_testsuite_report () \
{ \
result_count $$1 "TOTAL:" $$all "$$brg"; \
result_count $$1 "PASS: " $$pass "$$grn"; \
result_count $$1 "SKIP: " $$skip "$$blu"; \
result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
result_count $$1 "FAIL: " $$fail "$$red"; \
result_count $$1 "XPASS:" $$xpass "$$red"; \
result_count $$1 "ERROR:" $$error "$$mgn"; \
}; \
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
create_testsuite_report --no-color; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
for i in $$bases; do \
if grep "^$$ws*:copy-in-global-log:$$ws*no$$ws*$$" $$i.trs \
>/dev/null; then continue; \
fi; \
glob_res=`sed -n -e "s/$$ws*$$//" \
-e "s/^$$ws*:global-test-result:$$ws*//p" \
$$i.trs`; \
test -n "$$glob_res" || glob_res=RUN; \
echo "$$glob_res: $$i" | $(am__rst_section); \
if test ! -r $$i.log; then \
echo "fatal: making $@: $$i.log is unreadable" >&2; \
exit 1; \
fi; \
cat $$i.log; echo; \
done; \
} >$(TEST_SUITE_LOG).tmp; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
if $$success; then \
col="$$grn"; \
else \
col="$$red"; \
test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
fi; \
echo "$${col}$$br$${std}"; \
echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
echo "$${col}$$br$${std}"; \
create_testsuite_report --maybe-color; \
echo "$$col$$br$$std"; \
if $$success; then :; else \
echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
if test -n "$(PACKAGE_BUGREPORT)"; then \
echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
fi; \
echo "$$col$$br$$std"; \
fi; \
$$success || exit 1
check-TESTS:
@if test $@ != recheck; then \
list='$(RECHECK_LOGS)'; \
test -z "$$list" || rm -f $$list; \
fi
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@ws='[ ]'; \
log_list='' trs_list=''; $(am__set_TESTS_bases); \
for i in $$bases; do \
if test -z "$$log_list"; then \
log_list="$$i.log"; \
else \
log_list="$$log_list $$i.log"; \
fi; \
if test -z "$$trs_list"; then \
trs_list="$$i.trs"; \
else \
trs_list="$$trs_list $$i.trs"; \
fi; \
done; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"
.sh.log:
@p='$<'; \
$(am__set_b); \
$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) -- $(SH_LOG_COMPILE) "$$tst"